- 18 Mar, 2021 9 commits
-
-
Mika Westerberg authored
This function takes a deep copy of the properties. We need this in order to support more dynamic properties per XDomain connection as required by the USB4 inter-domain service spec. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
The USB4 inter-domain service spec has slightly different recommended timeouts for the XDomain protocol so align the driver with those. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
As recommended by USB4 inter-domain service spec use pseudo-random value instead of zero as initial XDomain property block generation value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
This step is actually not needed. The service drivers themselves will handle this once they have negotiated the service up and running again with the remote side. Also dropping this makes it easier to add support for multiple DMA tunnels over a single XDomain connection. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
Currently the driver is pretty quiet when another host is connected which makes debugging possible issues harder. For this reason add more logging on debug level that can be turned on as needed. While there log the host-to-host connection on info level analogous to routers and retimers. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
These are actually not needed as we already have similar entries that apply to all devices on the Thunderbolt bus. Cc: Isaac Hazan <isaac.hazan@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
When the firmware connection manager is not proxying between the software and the hardware we can decrease the timeout for control packets significantly. The USB4 spec recommends 10 ms +- 1 ms but we use slightly larger value (100 ms) which is recommendation from Intel Thunderbolt firmware folks. When firmware connection manager is running then we keep using the existing 5000 ms. To implement this we move the control channel allocation to tb_domain_alloc(), and pass the timeout from that function to the tb_ctl_alloc(). Then make both connection manager implementations pass the timeout when they alloc the domain structure. While there update kernel-doc of struct tb_ctl to match the reality. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
There is only one user for this function and it passes the default timeout to it anyway, so remove the parameter completely. This is also needed in the subsequent patch where we allow connection manager implementations to use different timeout for non-raw control channel messages. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Mika Westerberg authored
In most cases the response packet is lost because the router in question was disconnected by the user. Resending the control packet in that case just adds unnecessary delays, so disable that for intra-domain control packets. For inter-domain (XDomain) packets we continue retrying. This also aligns the driver better what the Intel connection manager firmware is doing. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
- 12 Mar, 2021 1 commit
-
-
Gil Fine authored
Currently, when first failure occurs while reading of the block, we stop reading the block and jump to the next capability. This doesn't cover the case of block with "holes" of inaccessible dwords, followed by accessible dwords. This patch address this problem. In case of failure while reading the complete block in one transaction, (because of one or more dwords is inaccessible), we read the remaining dwords of the block dword-by-dword, one dword per transaction, till the end of the block. By doing this, we handle the case of block with "holes" of inaccessible dwords, followed by accessible dwords. The accessible dwords are shown with the fields: <offset> <relative_offset> <cap_id> <vs_cap_id> <value> E.g.: 0x01eb 236 0x05 0x06 0x0000d166 While the inaccesible dwords are shown as: <offset> <not accessible> E.g.: 0x01ed <not accessible> Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
- 08 Mar, 2021 2 commits
-
-
Gil Fine authored
Drop the two functions not used anymore in the driver. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
Gil Fine authored
There are cases when reading block of dwords in single transaction fail, for several reasons, mostly if HW publish to implement all of the dwords, while actually it doesn't or if some dwords not accessible for read for security reasons. We handle these cases by trying to read the block, dword-by-dword, one dword per transaction, till we get a failure. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-
- 06 Mar, 2021 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 24 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use"
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A bit of a mix between fallout from the worker change, cleanups and reductions now possible from that change, and fixes in general. In detail: - Fully serialize manager and worker creation, fixing races due to that. - Clean up some naming that had gone stale. - SQPOLL fixes. - Fix race condition around task_work rework that went into this merge window. - Implement unshare. Used for when the original task does unshare(2) or setuid/seteuid and friends, drops the original workers and forks new ones. - Drop the only remaining piece of state shuffling we had left, which was cred. Move it into issue instead, and we can drop all of that code too. - Kill f_op->flush() usage. That was such a nasty hack that we had out of necessity, we no longer need it. - Following from ->flush() removal, we can also drop various bits of ctx state related to SQPOLL and cancelations. - Fix an issue with IOPOLL retry, which originally was fallout from a filemap change (removing iov_iter_revert()), but uncovered an issue with iovec re-import too late. - Fix an issue with system suspend. - Use xchg() for fallback work, instead of cmpxchg(). - Properly destroy io-wq on exec. - Add create_io_thread() core helper, and use that in io-wq and io_uring. This allows us to remove various silly completion events related to thread setup. - A few error handling fixes. This should be the grunt of fixes necessary for the new workers, next week should be quieter. We've got a pending series from Pavel on cancelations, and how tasks and rings are indexed. Outside of that, should just be minor fixes. Even with these fixes, we're still killing a net ~80 lines" * tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits) io_uring: don't restrict issue_flags for io_openat io_uring: make SQPOLL thread parking saner io-wq: kill hashed waitqueue before manager exits io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return io_uring: don't keep looping for more events if we can't flush overflow io_uring: move to using create_io_thread() kernel: provide create_io_thread() helper io_uring: reliably cancel linked timeouts io_uring: cancel-match based on flags io-wq: ensure all pending work is canceled on exit io_uring: ensure that threads freeze on suspend io_uring: remove extra in_idle wake up io_uring: inline __io_queue_async_work() io_uring: inline io_req_clean_work() io_uring: choose right tctx->io_wq for try cancel io_uring: fix -EAGAIN retry with IOPOLL io-wq: fix error path leak of buffered write hash map io_uring: remove sqo_task io_uring: kill sqo_dead and sqo submission halting io_uring: ignore double poll add on the same waitqueue head ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix the usage of device links in the runtime PM core code and update the DTPM (Dynamic Thermal Power Management) feature added recently. Specifics: - Make the runtime PM core code avoid attempting to suspend supplier devices before updating the PM-runtime status of a consumer to 'suspended' (Rafael Wysocki). - Fix DTPM (Dynamic Thermal Power Management) root node initialization and label that feature as EXPERIMENTAL in Kconfig (Daniel Lezcano)" * tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap/drivers/dtpm: Add the experimental label to the option description powercap/drivers/dtpm: Fix root node initialization PM: runtime: Update device status before letting suppliers suspend
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Make the empty stubs of some helper functions used when CONFIG_ACPI is not set actually match those functions (Andy Shevchenko)" * tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: bus: Constify is_acpi_node() and friends (part 2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Fix a sleeping-while-atomic issue in the AMD IOMMU code - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d driver - Fix status code definitions for Intel VT-d - Fix IO Page Fault issue in Tegra IOMMU driver * tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix status code for Allocate/Free PASID command iommu: Don't use lazy flush for untrusted device iommu/tegra-smmu: Fix mc errors on tegra124-nyan iommu/amd: Fix sleeping in atomic in increase_address_space()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "More regression fixes and stabilization. Regressions: - zoned mode - count zone sizes in wider int types - fix space accounting for read-only block groups - subpage: fix page tail zeroing Fixes: - fix spurious warning when remounting with free space tree - fix warning when creating a directory with smack enabled - ioctl checks for qgroup inheritance when creating a snapshot - qgroup - fix missing unlock on error path in zero range - fix amount of released reservation on error - fix flushing from unsafe context with open transaction, potentially deadlocking - minor build warning fixes" * tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: do not account freed region of read-only block group as zone_unusable btrfs: zoned: use sector_t for zone sectors btrfs: subpage: fix the false data csum mismatch error btrfs: fix warning when creating a directory with smack enabled btrfs: don't flush from btrfs_delayed_inode_reserve_metadata btrfs: export and rename qgroup_reserve_meta btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata btrfs: fix spurious free_space_tree remount warning btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors btrfs: ref-verify: use 'inline void' keyword ordering
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Another batch of graph and video-interfaces schema conversions - Drop DT header symlink for dropped C6X arch - Fix bcm2711-hdmi schema error * tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: media: Use graph and video-interfaces schemas, round 2 dts: drop dangling c6x symlink dt-bindings: bcm2711-hdmi: Fix broken schema
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Functional fixes: - Fix big endian conversion for arm64 in recordmcount processing - Fix timestamp corruption in ring buffer on discarding events - Fix memory leak in __create_synth_event() - Skip selftests if tracing is disabled as it will cause them to fail. Non-functional fixes: - Fix help text in Kconfig - Remove duplicate prototype for trace_empty() - Fix stale comment about the trace_event_call flags. Self test update: - Add more information to the validation output of when a corrupt timestamp is found in the ring buffer, and also trigger a warning to make sure that tests catch it" * tag 'trace-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix comment about the trace_event_call flags tracing: Skip selftests if tracing is disabled tracing: Fix memory leak in __create_synth_event() ring-buffer: Add a little more information and a WARN when time stamp going backwards is detected ring-buffer: Force before_stamp and write_stamp to be different on discard tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig tracing: Remove duplicate declaration from trace.h ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount
-
Bob Pearson authored
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb which triggered a warning at 'done:' and could possibly at 'exit:'. The WARN_ONCE() calls are not actually needed. The call to free_pkt() is moved to the end to clearly show that all skbs are freed. Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Bob Pearson authored
rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error occurred causing an underflow on the reference counter. This code is cleaned up to be clearer and easier to read. Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Bob Pearson authored
When the noted patch below extending the reference taken by rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it was not matched by a reference in the loopback path resulting in underflows. Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Pavel Begunkov authored
45d189c6 ("io_uring: replace force_nonblock with flags") did something strange for io_openat() slicing all issue_flags but IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the flags. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for 5.12: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy)" * tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
-
Jens Axboe authored
We have this weird true/false return from parking, and then some of the callers decide to look at that. It can lead to unbalanced parks and sqd locking. Have the callers check the thread status once it's parked. We know we have the lock at that point, so it's either valid or it's NULL. Fix race with parking on thread exit. We need to be careful here with ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit. Rename sqd->completion to sqd->parked to reflect that this is the only thing this completion event doesn. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
If we race with shutting down the io-wq context and someone queueing a hashed entry, then we can exit the manager with it armed. If it then triggers after the manager has exited, we can have a use-after-free where io_wqe_hash_wake() attempts to wake a now gone manager process. Move the killing of the hashed write queue into the manager itself, so that we know we've killed it before the task exits. Fixes: e941894e ("io-wq: make buffered file write hashed work map per-ctx") Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
The callback can only be armed, if we get -EIOCBQUEUED returned. It's important that we clear the WAITQ bit for other cases, otherwise we can queue for async retry and filemap will assume that we're armed and return -EAGAIN instead of just blocking for the IO. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
It doesn't make sense to wait for more events to come in, if we can't even flush the overflow we already have to the ring. Return -EBUSY for that condition, just like we do for attempts to submit with overflow pending. Cc: stable@vger.kernel.org # 5.11 Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
This allows us to do task creation and setup without needing to use completions to try and synchronize with the starting thread. Get rid of the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup completion events - we can now do setup before the task is running. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Rafael J. Wysocki authored
* powercap: powercap/drivers/dtpm: Add the experimental label to the option description powercap/drivers/dtpm: Fix root node initialization
-
Max Gurtovoy authored
In case we have already established connection to nvmf target, it shouldn't be allowed to change the model_number. E.g. if someone will identify ctrl and get model_number of "my_model" later on will change the model_numbel via configfs to "my_new_model" this will break the NVMe specification for "Get Log Page – Persistent Event Log" that refers to Model Number as: "This field contains the same value as reported in the Model Number field of the Identify Controller data structure, bytes 63:24." Although it doesn't mentioned explicitly that this field can't be changed, we can assume it. So allow setting this field only once: using configfs or in the first identify ctrl operation. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Martin George authored
Currently kato is initialized to NVME_DEFAULT_KATO for both discovery & i/o controllers. This is a problem specifically for non-persistent discovery controllers since it always ends up with a non-zero kato value. Fix this by initializing kato to zero instead, and ensuring various controllers are assigned appropriate kato values as follows: non-persistent controllers - kato set to zero persistent controllers - kato set to NVMF_DEV_DISC_TMO (or any positive int via nvme-cli) i/o controllers - kato set to NVME_DEFAULT_KATO (or any positive int via nvme-cli) Signed-off-by: Martin George <marting@netapp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Daniel Wagner authored
The hwmon pointer wont be NULL if the registration fails. Though the exit code path will assign it to ctrl->hwmon_device. Later nvme_hwmon_exit() will try to free the invalid pointer. Avoid this by returning the error code from hwmon_device_register_with_info(). Fixes: ed7770f6 ("nvme/hwmon: rework to avoid devm allocation") Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Pascal Terjan authored
Add the NVME_QUIRK_NO_NS_DESC_LIST and NVME_QUIRK_IGNORE_DEV_SUBNQN quirks for this buggy device. Reported and tested in https://bugs.mageia.org/show_bug.cgi?id=28417Signed-off-by: Pascal Terjan <pterjan@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-