Remove this code, per Dave Miller's request, since it is not being used
anywhere in the kernel.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit df8ef8f3
    macvlan: add FDB bridge ops and macvlan flags
added a flags field to macvlan, which can be
controlled from userspace.
The idea is to make the interface future-proof
so we can add flags and not new fields.

However, flags value isn't validated, as a result,
userspace can't detect which flags are supported.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following is needed as well to fix warning/error about shifting a 32 bit
value 32 bits which occurs if building on 32 bit platform caused by conversion
to using dma_addr_t
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When renaming ll_poll to busy poll, I introduced a typo
in the name of the do-nothing placeholder for sk_busy_loop
and called it sk_busy_poll.
This broke compile when busy poll was not configured.
Cong Wang submitted a patch to fixed that.
This patch removes the now redundant, misspelled placeholder.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This old driver never checked for DMA mapping errors.
Causing splats with the new DMA mapping checks:
	WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x930()
	skge 0000:01:09.0: DMA-API: device driver failed to check map

Add checks and unwind code.
Reported-by: poma <pomidorabelisima@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Don't ignore user initiated wireless regulatory settings on cards
    with custom regulatory domains, from Arik Nemtsov.

 2) Fix length check of bluetooth information responses, from Jaganath
    Kanakkassery.

 3) Fix misuse of PTR_ERR in btusb, from Adam Lee.

 4) Handle rfkill properly while iwlwifi devices are offline, from
    Emmanuel Grumbach.

 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang.

 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter.

 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman.

 8) Fix bridge multicast code to not snoop when no querier exists,
    otherwise mutlicast traffic is lost.  From Linus Lüssing.

 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek.

10) Fix races in automatic address asignment on ipv6, which can result
    in incorrect lifetime assignments.  From Jiri Benc.

11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename
    it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the
    original naming of this feature.  From Cong Wang.

12) Fix crash in TIPC when server socket creation fails, from Ying Xue.

13) macvlan_changelink() silently succeeds when it shouldn't, from
    Michael S Tsirkin.

14) HTB packet scheduler can crash due to sign extension, fix from
    Stephen Hemminger.

15) With the cable unplugged, r8169 prints out a message every 10
    seconds, make it netif_dbg() instead of netif_warn().  From Peter
    Wu.

16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann.

17) sis900 gets spurious TX queue timeouts due to mismanagement of link
    carrier state, from Denis Kirjanov.

18) Validate somaxconn sysctl to make sure it fits inside of a u16.
    From Roman Gushchin.

19) Fix MAC address filtering on qlcnic, from Shahed Shaikh.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits)
  qlcnic: Fix for flash update failure on 83xx adapter
  qlcnic: Fix link speed and duplex display for 83xx adapter
  qlcnic: Fix link speed display for 82xx adapter
  qlcnic: Fix external loopback test.
  qlcnic: Removed adapter series name from warning messages.
  qlcnic: Free up memory in error path.
  qlcnic: Fix ingress MAC learning
  qlcnic: Fix MAC address filter issue on 82xx adapter
  net: ethernet: davinci_emac: drop IRQF_DISABLED
  netlabel: use domain based selectors when address based selectors are not available
  net: check net.core.somaxconn sysctl values
  sis900: Fix the tx queue timeout issue
  net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails
  r8169: remove "PHY reset until link up" log spam
  net: ethernet: cpsw: drop IRQF_DISABLED
  htb: fix sign extension bug
  macvlan: handle set_promiscuity failures
  macvlan: better mode validation
  tipc: fix oops when creating server socket fails
  net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL
  ...

Flash update routine was improperly checking register read API return value.
Modify register read API and perform proper error check.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Set link speed and duplex to unknown when link is not up.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Do not obtain link speed from register when adapter
  link is down.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver was not handling external loopback diagnostic
test request.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Delete MAC address from the adapter's filter table
  if the source MAC address of ingress packet matches.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver was passing the address of a pointer instead of
the pointer itself.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IRQF_DISABLED is a no-op by now and should be removed.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nfsd bugfixes from Bruce Fields:
 "Most of this is due to a screwup on my part -- some gss-proxy crashes
  got fixed before the merge window but somehow never made it out of a
  temporary git repo on my laptop...."

* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
  svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall
  svcrpc: fix kfree oops in gss-proxy code
  svcrpc: fix gss-proxy xdr decoding oops
  svcrpc: fix gss_rpc_upcall create error
  NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.

Pull hwmon fix from Guenter Roeck:
 "Fix chip initialization/configuration in MAX6697 driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max6697) fix MAX6581 ideality

Pull arm fixes fixes from Russell King:
 "This fixes a couple of problems with commit 48be69a0 ("ARM: move
  signal handlers into a vdso-like page"), one of which was originally
  discovered via my testing originally, but the fix for it was never
  actually committed.

  The other shows up on noMMU builds, and such platforms are extremely
  rare and as such are not part of my nightly testing"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: fix nommu builds with 48be69a0 (ARM: move signal handlers into a vdso-like page)
  ARM: fix a cockup in 48be69a0 (ARM: move signal handlers into a vdso-like page)

Without this patch, the values for ideality (register 0x4b) and ideality
selection mask (register 0x4c) are inverted.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Olof reports that noMMU builds error out with:

arch/arm/kernel/signal.c: In function 'setup_return':
arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage'

This shows one of the evilnesses of IS_ENABLED().  Get rid of it here
and replace it with #ifdef's - and as no noMMU platform can make use
of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Unfortunately, I never committed the fix to a nasty oops which can
occur as a result of that commit:

------------[ cut here ]------------
kernel BUG at /home/olof/work/batch/include/linux/mm.h:414!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe03080 #53
task: e90acac0 ti: e9be8000 task.ti: e9be8000
PC is at special_mapping_fault+0xa4/0xc4
LR is at __do_fault+0x68/0x48c

This doesn't show up unless you do quite a bit of testing; a simple
boot test does not do this, so all my nightly tests were passing fine.

The reason for this is that install_special_mapping() expects the
page array to stick around, and as this was only inserting one page
which was stored on the kernel stack, that's why this was blowing up.
Reported-by: Olof Johansson <olof@lixom.net>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

NetLabel has the ability to selectively assign network security labels
to outbound traffic based on either the LSM's "domain" (different for
each LSM), the network destination, or a combination of both.  Depending
on the type of traffic, local or forwarded, and the type of traffic
selector, domain or address based, different hooks are used to label the
traffic; the goal being minimal overhead.

Unfortunately, there is a bug such that a system using NetLabel domain
based traffic selectors does not correctly label outbound local traffic
that is not assigned to a socket.  The issue is that in these cases
the associated NetLabel hook only looks at the address based selectors
and not the domain based selectors.  This patch corrects this by
checking both the domain and address based selectors so that the correct
labeling is applied, regardless of the configuration type.

In order to acomplish this fix, this patch also simplifies some of the
NetLabel domainhash structures to use a more common outbound traffic
mapping type: struct netlbl_dommap_def.  This simplifies some of the code
in this patch and paves the way for further simplifications in the
future.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's possible to assign an invalid value to the net.core.somaxconn
sysctl variable, because there is no checks at all.

The sk_max_ack_backlog field of the sock structure is defined as
unsigned short. Therefore, the backlog argument in inet_listen()
shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall
is truncated to the somaxconn value. So, the somaxconn value shouldn't
exceed 65535 (USHRT_MAX).
Also, negative values of somaxconn are meaningless.

before:
$ sysctl -w net.core.somaxconn=256
net.core.somaxconn = 256
$ sysctl -w net.core.somaxconn=65536
net.core.somaxconn = 65536
$ sysctl -w net.core.somaxconn=-100
net.core.somaxconn = -100

after:
$ sysctl -w net.core.somaxconn=256
net.core.somaxconn = 256
$ sysctl -w net.core.somaxconn=65536
error: "Invalid argument" setting key "net.core.somaxconn"
$ sysctl -w net.core.somaxconn=-100
error: "Invalid argument" setting key "net.core.somaxconn"

Based on a prior patch from Changli Gao.
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Reported-by: Changli Gao <xiaosuo@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[  198.720048] ------------[ cut here ]------------
[  198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240()
[  198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out
[  198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii
[  198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12
[  198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS
Revision 1013 Beta 001 12/14/2001
[  198.720175]  000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24
[  198.720197]  00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10
[  198.720217]  c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea
[  198.720240] Call Trace:
[  198.720257]  [<c13fa6b9>] ? dev_watchdog+0x229/0x240
[  198.720274]  [<c12208d6>] dump_stack+0x16/0x20
[  198.720306]  [<c1031e4d>] warn_slowpath_common+0x7d/0xa0
[  198.720318]  [<c13fa6b9>] ? dev_watchdog+0x229/0x240
[  198.720330]  [<c1031f13>] warn_slowpath_fmt+0x33/0x40
[  198.720342]  [<c13fa6b9>] dev_watchdog+0x229/0x240
[  198.720357]  [<c103f158>] call_timer_fn+0x78/0x150
[  198.720369]  [<c103f0e0>] ? internal_add_timer+0x40/0x40
[  198.720381]  [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0
[  198.720392]  [<c103f33f>] run_timer_softirq+0x10f/0x200
[  198.720412]  [<c103954f>] ? __do_softirq+0x6f/0x210
[  198.720424]  [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0
[  198.720435]  [<c1039598>] __do_softirq+0xb8/0x210
[  198.720467]  [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30
[  198.720484]  [<c1003245>] ? handle_irq+0x25/0xd0
[  198.720496]  [<c1039c0c>] irq_exit+0x9c/0xb0
[  198.720508]  [<c14bc9d7>] do_IRQ+0x47/0x94
[  198.720534]  [<c1056078>] ? hrtimer_start+0x28/0x30
[  198.720564]  [<c14bc8b1>] common_interrupt+0x31/0x38
[  198.720589]  [<c1008692>] ? default_idle+0x22/0xa0
[  198.720600]  [<c10083c7>] arch_cpu_idle+0x17/0x30
[  198.720631]  [<c106d23d>] cpu_startup_entry+0xcd/0x180
[  198.720643]  [<c14ae30a>] rest_init+0xaa/0xb0
[  198.720654]  [<c14ae260>] ? reciprocal_value+0x50/0x50
[  198.720668]  [<c17044e0>] ? repair_env_string+0x60/0x60
[  198.720679]  [<c1704bda>] start_kernel+0x29a/0x350
[  198.720690]  [<c17044e0>] ? repair_env_string+0x60/0x60
[  198.720721]  [<c1704269>] i386_start_kernel+0x39/0xa0
[  198.720729] ---[ end trace 81e0a6266f5c73a8 ]---
[  198.720740] eth0: Transmit timeout, status 00000204 00000000

timer routine checks the link status and if it's up calls
netif_carrier_on() allowing upper layer to start the tx queue
even if the auto-negotiation process is not finished.

Also remove ugly auto-negotiation check from the sis900_start_xmit()

CC: Duan Fugang <B38611@freescale.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull infiniband/rdma fixes from Roland Dreier:
 - Fixes for the newly merged mlx5 hardware driver
 - Stack info leak fixes from Dan Carpenter
 - Fixes for pkey table handling with SR-IOV
 - A few other small things

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Fix pkey change flow for virtualization environments
  IPoIB: Make sure child devices use valid/proper pkeys
  IB/core: Create QP1 using the pkey index which contains the default pkey
  mlx5_core: Variable may be used uninitialized
  mlx5_core: Implement new initialization sequence
  mlx5_core: Fix use after free in mlx5_cmd_comp_handler()
  IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()
  IB/mlx5: Fix error return code in init_one()
  IB/mlx4: Use default pkey when creating tunnel QPs
  RDMA/cma: Only call cma_save_ib_info() for CM REQs
  RDMA/cma: Fix accessing invalid private data for UD
  RDMA/cma: Fix gcc warning
  Revert "RDMA/nes: Fix compilation error when nes_debug is enabled"
  IB/qib: Add err_decode() call for ring dump
  RDMA/cxgb3: Fix stack info leak in iwch_create_cq()
  RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq()
  RDMA/ocrdma: Fix several stack info leaks
  RDMA/cxgb4: Fix stack info leak in c4iw_create_qp()
  RDMA/ocrdma: Remove unused include

Pull GPIO fixes from Linus Walleij:
 "Yet another GPIO pull request, fixing the fix from the last one.  It
  turns out that fixing the boot path for device tree boots on OMAP
  breaks out antique systems (such as OMAP1) and we need to find a
  better way.  So we're reverting that "fix" for the moment and thinking
  about something better.

  Also fixing a build issue on the MSM driver"

* tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio_msm: Fix build error due to missing err.h
  Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT"
  Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT"
  Revert "gpio/omap: fix build error when OF_GPIO is not defined."

Commit 5c766d64 ("ipv4: introduce address lifetime") leaves the ifa
resource that was allocated via inet_alloc_ifa() unfreed when returning
the function with -EINVAL. Thus, free it first via inet_free_ifa().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

This message was added in commit a7154cb8 (June 2004, [PATCH] r8169:
link handling and phy reset rework) and is printed every ten seconds
when no cable is connected and runtime power management is disabled.
(Before that commit, "Reset RTL8169s PHY" would be printed instead.)
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IRQF_DISABLED is a no-op by now and should be
removed.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When userspace passes a large priority value
the assignment of the unsigned value hopt->prio
to  signed int cl->prio causes cl->prio to become negative and the
comparison is with TC_HTB_NUMPRIO is always false.

The result is that HTB crashes by referencing outside
the array when processing packets. With this patch the large value
wraps around like other values outside the normal range.

See: https://bugzilla.kernel.org/show_bug.cgi?id=60669Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull powerpc fixes from Ben Herrenschmidt:
 "Here is not quite a handful of powerpc fixes for rc3.

  The windfarm fix is a regression fix (though not a new one), the PMU
  interrupt rename is not a fix per-se but has been submitted a long
  time ago and I kept forgetting to put it in (it puts us back in sync
  with x86), the other perf bit is just about putting an API/ABI bit
  definition in the right place for userspace to consume, and finally,
  we have a fix for the VPHN (Virtual Partition Home Node) feature
  (notification that the hypervisor is moving nodes around) which could
  cause lockups so we may as well fix it now"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/windfarm: Fix noisy slots-fan on Xserve (rm31)
  powerpc: VPHN topology change updates all siblings
  powerpc/perf: Export PERF_EVENT_CONFIG_EBB_SHIFT to userspace
  powerpc: Rename PMU interrupts from CNT to PMI

Pull ARM fixes from Russell King:
 "I've thought long and hard about what to say for this pull request,
  and I really can't work out anything sane to say to summarise much of
  these commits.  The problem is, for most of these are, yet again, lots
  of small bits scattered around the place without any real overall
  theme to them"

Most notable is probably the kuser page helper improvements.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (22 commits)
  ARM: Add .text annotations where required after __CPUINIT removal
  ARM: 7803/1: Fix deadlock scenario with smp_send_stop()
  ARM: make vectors page inaccessible from userspace
  ARM: move signal handlers into a vdso-like page
  ARM: allow kuser helpers to be removed from the vector page
  ARM: update FIQ support for relocation of vectors
  ARM: use linker magic for vectors and vector stubs
  ARM: move vector stubs
  ARM: poison memory between kuser helpers
  ARM: poison the vectors page
  ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above is_smp() test
  ARM: 7800/1: ARMv7-M: Fix name of NVIC handler function
  ARM: Fix sorting of machine- initializers
  ARM: 7791/1: a.out: remove partial a.out support
  ARM: 7790/1: Fix deferred mm switch on VIVT processors
  ARM: 7789/1: Do not run dummy_flush_tlb_a15_erratum() on non-Cortex-A15
  ARM: 7787/1: virt: ensure visibility of __boot_cpu_mode
  ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfo
  ARM: 7786/1: hyp: fix macro parameterisation
  ARM: 7785/1: mm: restrict early_alloc to section-aligned memory
  ...

Pull parisc updates from Helge Deller:
 "The majority of lines changed are due the addition of a defconfig for
  the C8000 machine.  Even the fix in parisc/kernel/cache.c file is
  actually ony a 10-line fix, but the change became bigger (and much
  nicer) to avoid errors of the checkpatch script.

  Here is the short-changelog:

  This round of parisc updates includes mostly fixes for the C8000
  workstation.  We have a new defconfig file for this machine, as well
  as fixes for it's serial port, the AGP driver and the cache routines
  to cope with the vmas of the FireGL card in a C8000.  The sys32.h
  header file was not used and as such it's now gone"

* 'parisc-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix interrupt routing for C8000 serial ports
  parisc: Remove arch/parisc/kernel/sys32.h header
  parisc: add defconfig for c8000 machine
  parisc: agp/parisc-agp: allow binding of user memory to the AGP GART
  parisc: Fix cache routines to ignore vma's with an invalid pfn

Pull HID fixes from Jiri Kosina:
 - fix hid-sony PS3 sixaxxis breakage from Benjamin Tissories
 - fix hidraw race condition from Yonghua Zheng
 - fix/bandaid for rare device enumeration problems of Logitech Unifying
   receivers from Nestor Lopez Casado

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hidraw: fix improper mutex release
  HID: sony: fix HID mapping for PS3 sixaxis controller
  HID: hid-logitech-dj: querying_devices was never set
  HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""

Pull MCE fix from Tony Luck:
 "Fix a regression in mce-severity.c"

* tag 'please-pull-fix-mce-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  x86/mce: Fix mce regression from recent cleanup

Pull PCI fixes from Bjorn Helgaas:
 "Yinghai fixed a couple regressions: one resource assignment problem
  introduced in v3.10 that showed up with SR-IOV on powerpc, and another
  SR-IOV hot-remove issue related to refcounting changes we merged for
  v3.11.

  Yinghai is still working on another SR-IOV-related fix or two, which
  will be simpler if pciehp is non-modular, so I included the Kconfig
  changes now to get them in earlier.

  Finally, a minor fix for the ARM Marvell EBU host bridge driver that
  was merged for v3.11

  Hotplug:
      PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device
      PCI: hotplug: Convert to be builtin only, not modular
      PCI: pciehp: Convert pciehp to be builtin only, not modular

  Resource allocation:
      PCI: Retry allocation of only the resource type that failed

  ARM:
      PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge"

* tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge
  PCI: Retry allocation of only the resource type that failed
  PCI: pciehp: Convert pciehp to be builtin only, not modular
  PCI: hotplug: Convert to be builtin only, not modular
  PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device

Pull ACPI and power management fixes from Rafael Wysocki:

 - Revert two cpuidle commits added during the 3.8 development cycle
   that turn out to have introduced a significant performance regression
   as requested by Jeremy Eder.

 - The recent patches that made the freezer less heavy-weight introduced
   a regression causing user-space-driven hibernation using the ioctl()
   interface to block indefinitely when the hibernate process executes
   try_to_freeze().  Fix from Colin Cross addresses this by adding a
   process flag to mark the hibernate/suspend process to inform the
   freezer that that process should be ignored.

 - One of the recent cpufreq reverts uncovered a problem in the core
   causing the cpufreq driver module refcount to become negative after a
   system suspend-resume cycle.  Fix from Rafael J Wysocki.

 - The evaluation of the ACPI battery _BIX method has never worked
   correctly, because the commit that added support for it forgot to
   take the "Revision" field in the return package into account.  As a
   result, the reading of battery info doesn't work at all on some
   systems, which is addressed by a fix from Lan Tianyu.

* tag 'pm+acpi-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  freezer: set PF_SUSPEND_TASK flag on tasks that call freeze_processes
  ACPI / battery: Fix parsing _BIX return value
  cpufreq: Fix cpufreq driver module refcount balance after suspend/resume
  Revert "cpuidle: Quickly notice prediction failure for repeat mode"
  Revert "cpuidle: Quickly notice prediction failure in general case"

It's quite unlikely that dev_set_promiscuity will fail,
but worth checking just in case.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan passthrough mode is special: it's not possible to switch to or
from it through a netlink command.

But if you try, the command will succeed, which is
confusing.

Validate input and return error to user.

Cc:  Sridhar Samudrala <sri@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>