Check the additional flag in bnxt_hwrm_func_qcfg() before allowing
DCBX to be done in host mode.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added support for 100G link speed reporting for Broadcom BCM57454
ASIC in ethtool command.
Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .ndo_get_vf_config() is returning the wrong qos attribute.  Fix
the code that checks and reports the qos and spoofchk attributes.  The
BNXT_VF_QOS and BNXT_VF_LINK_UP flags should not be set by default
during init. time.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the driver gets the RoCE app priority set/delete call through DCBNL,
the driver will send the information to the firmware to set up the
priority VLAN tag for RDMA traffic.

[ New version using the common ETH_P_IBOE constant in if_ether.h ]
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new optional conntrack action attribute OVS_CT_ATTR_EVENTMASK,
which can be used in conjunction with the commit flag
(OVS_CT_ATTR_COMMIT) to set the mask of bits specifying which
conntrack events (IPCT_*) should be delivered via the Netfilter
netlink multicast groups.  Default behavior depends on the system
configuration, but typically a lot of events are delivered.  This can be
very chatty for the NFNLGRP_CONNTRACK_UPDATE group, even if only some
types of events are of interest.

Netfilter core init_conntrack() adds the event cache extension, so we
only need to set the ctmask value.  However, if the system is
configured without support for events, the setting will be skipped due
to extension not being found.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix typo in a comment.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nathan Fontenot says:

====================
ibmvnic: Additional updates and bug fixes

This set of patches is an additional set of updates and bug fixes to
the ibmvnic driver which applies on top of the previous set of updates
sent out on 4/19.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When an error is encountered during transmit we need to free the
skb instead of returning TX_BUSY.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Validate that the napi structs exist before trying to disable them
at driver close.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a common routine for setting the link state for the vnic adapter.
This update moves the sending of the crq and waiting for the link state
response to a common place. The new routine also adds handling of
resending the crq in cases of getting a partial success response.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should be initializing the stats token in the same place we
initialize the other resources for the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When handling a fatal error in the driver, there can be additional
error information provided by the vios. This information is not
always present, so only retrieve the additional error information
when present.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch addresses a modification in the PAPR+ specification which now
defines a previously reserved value for vNIC capabilities. It indicates
whether the system firmware performs a VLAN header stripping on all VLAN
tagged received frames, in case it does, the behavior expected is for
the ibmvnic driver to be responsible for inserting the VLAN header.
Reported-by: Manvanthara B. Puttashankar <mputtash@in.ibm.com>
Signed-off-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Along with 5 TX queues, 5 RX queues are allocated at the beginning of
device probe. However, only the real number of TX queues is set. Configure
the real number of RX queues as well.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mike Maloney says:

====================
packet: Add option to create new fanout group with unique id.

Fanout uses a per net global namespace. A process that intends to create a
new fanout group can accidentally join an existing group. It is
not possible to detect this.

Add a socket option to specify on the first call to
setsockopt(..., PACKET_FANOUT, ...) to ensure that a new group is created.
Also add tests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Create two groups with PACKET_FANOUT_FLAG_UNIQUEID, add a socket to one.
Ensure that the groups can only be joined if all options are consistent
with the original except for this flag.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fanout uses a per net global namespace. A process that intends to create
a new fanout group can accidentally join an existing group. It is not
possible to detect this.

Add socket option PACKET_FANOUT_FLAG_UNIQUEID.  When specified the
supplied fanout group id must be set to 0, and the kernel chooses an id
that is not already in use.  This is an ephemeral flag so that
other sockets can be added to this group using setsockopt, but NOT
specifying this flag.  The current getsockopt(..., PACKET_FANOUT, ...)
can be used to retrieve the new group id.

We assume that there are not a lot of fanout groups and that this is not
a high frequency call.

The method assigns ids starting at zero and increases until it finds an
unused id.  It keeps track of the last assigned id, and uses it as a
starting point to find new ids.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_fanout_open no longer sets the size of packet_socket ring, so stop
passing the parameter.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some boards [1] leave the PHYs at an invalid state
during system power-up or reset thus causing unreliability
issues with the PHY which manifests as PHY not being detected
or link not functional. To fix this, these PHYs need to be RESET
via a GPIO connected to the PHY's RESET pin.

Some boards have a single GPIO controlling the PHY RESET pin of all
PHYs on the bus whereas some others have separate GPIOs controlling
individual PHY RESETs.

In both cases, the RESET de-assertion cannot be done in the PHY driver
as the PHY will not probe till its reset is de-asserted.
So do the RESET de-assertion in the MDIO bus driver.

[1] - am572x-idk, am571x-idk, a437x-idk
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stefan Hajnoczi says:

====================
VSOCK: vsockmon virtual device to monitor AF_VSOCK sockets.

v5:
 * Change vsock_deliver_tap() API to avoid unnecessary skb creation
   [Jorgen]
 * Fix skb leak when no taps are registered [Jorgen]
 * s/cpu_to_le16(pkt->hdr.op)/le16_to_cpu(pkt->hdr.op)/ [Michael]
 * Add af_vsock_tap.c and vsockmon.[ch] to MAINTAINERS
 * checkpatch.pl and sparse fixes

v4:
 * Add explicit reserved padding field to struct af_vsockmon_hdr and
   drop __attribute__((packed)) [Michael, DaveM]
 * Call synchronize_net() before module_put() [Michael]

v3:
 * Hook virtio_transport.c (guest driver), not just drivers/vhost/vsock.c (host
   driver)
 * Fix DEFAULT_MTU macro definition [Zhu Yanjun]
 * Rename af_vsockmon_hdr->t field ->transport for clarity
 * Update .ndo_get_stats64() return type since it has changed
 * Include missing <linux/module.h> header in af_vsock_tap.c

This is a continuation of Gerard Garcia's work on the vsockmon packet capture
interface for AF_VSOCK.  Packet capture is an essential feature for network
communication.  Gerard began addressing this feature gap in his Google Summer
of Code 2016 project.  I have cleaned up, rebased, and retested the v2 series
he posted previously.

The design follows the nlmon packet capture interface closely.  This is because
vsock has the same problem as netlink: there is no netdev on which packets can
be captured.  The nlmon driver is a synthetic netdev purely for the purpose of
enabling packet capture.  We follow the same approach here with vsockmon.

See include/uapi/linux/vsockmon.h in this series for details on the packet
layout.

How to try it:

1. Build tcpdump with vsockmon patches:

  $ git clone -b vsock https://github.com/stefanha/libpcap
  $ (cd libcap && ./configure && make)
  $ git clone -b vsock https://github.com/stefanha/tcpdump
  $ (cd tcpdump && ./configure && make)

2. Build nc-vsock (a netcat-like tool):

  $ git clone https://github.com/stefanha/nc-vsock
  $ (cd nc-vsock && make)

3. Launch a virtual machine:

  # modprobe vhost_vsock
  # qemu-system-x86_64 -M accel=kvm -m 1024 -cpu host \
      -drive if=virtio,file=test.img,format=raw \
      -device vhost-vsock-pci,guest-cid=3

  (Assumes guest is running a kernel with this patch)

4. Capture AF_VSOCK traffic in guest and/or host:

  # modprobe vsockmon
  # ip link add type vsockmon
  # ip link set vsockmon0 up
  # tcpdump -i vsockmon0 -vvv

5. Communicate!

  (host)$ nc-vsock -l 1234
  (guest)$ nc-vsock 2 1234
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The virtio drivers deal with struct virtio_vsock_pkt.  Add
virtio_transport_deliver_tap_pkt(pkt) for handing packets to the
vsockmon device.

We call virtio_transport_deliver_tap_pkt(pkt) from
net/vmw_vsock/virtio_transport.c and drivers/vhost/vsock.c instead of
common code.  This is because the drivers may drop packets before
handing them to common code - we still want to capture them.
Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add vsockmon virtual network device that receives packets from the vsock
transports and exposes them to user space.

Based on the nlmon device.
Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tap functions that can be used by the vsock transports to
deliver packets to vsockmon virtual network devices.
Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2017-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.12

Quite a lot of patches for rtlwifi and iwlwifi this time, but changes
also for other active wireless drivers.

Major changes:

ath9k

* add support for Dell Wireless 1601 PCI device

* add debugfs file to manually override noise floor

ath10k

* bump up FW API to 6 for a new QCA6174 firmware branch

wil6210

* support 8 kB RX buffers

iwlwifi

* work to support A000 devices continues

* add support for FW API 30

* add Geographical and Dynamic Specific Absorption Rate (SAR) support

* support a few new PCI device IDs

rtlwifi

* work on adding Bluetooth coexistance support, not finished yet
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Dcbx/dcbnl enhancements.

The series has set of enhancements for dcbx/dcbnl implementation of
qed/qede drivers.
 - Patches (1) & (3) capture the sematic and debug changes.
 - Patch (2) adds the driver support for populating RoCEv2 dcb data.
 - Patch (4) adds the required support for reading/configuring the
   IEEE selection field (SF).
 - Patch (5) adds the support for configuring the static dcbx mode.

Please consider applying this to 'net-next' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds driver support for static/local dcbx mode. In this mode
adapter brings up the dcbx link with locally configured parameters
instead of performing the dcbx negotiation with the peer. The feature
is useful when peer device/switch doesn't support dcbx.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the older firmware there was no distinction between RoCE and RoCEv2
whereas the newer firmware (8.15.3.0) allows us to configure each
independently. Driver need to populate the RoCEv2 data in its specific
structure.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2017-04-20

This series contains updates to e1000, e1000e, igb/vf and ixgb.

Tobias Klauser cleans up e1000, ixgb and igbvf from having a local
function or structure for netdev stats.

Bernd Faust fixes an issue for 82579 devices, where the clock frequency
was being incorrectly set for these devices.  These devices only support
96MHz, so make sure they are set to use only that.

Yury Kylulin extends the work Jake and Alex did for ixgbe in MAC filter
handling into the igb driver.

Kim Tatt Chuah enables igb to wake up by packet and to read the necessary
Wake Up Status (WUS) and Wake Up Packet Memory (WUPM) registers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

update the list and remove 'in the future' statement,
since all still alive 64-bit architectures now do eBPF JIT.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

This is an eBPF JIT for sparc64.  All major features are supported.

All tests under tools/testing/selftests/bpf/ pass.
Signed-off-by: David S. Miller <davem@davemloft.net>

This is in preparation for adding the 64-bit eBPF JIT.
Signed-off-by: David S. Miller <davem@davemloft.net>

Both conflict were simple overlapping changes.

In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the
conversion of the driver in net-next to use in-netdev stats.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nfsd bugfix from Bruce Fields:
 "Fix a 4.11 regression that triggers a BUG() on an attempt to use an
  unsupported NFSv4 compound op"

* tag 'nfsd-4.11-2' of git://linux-nfs.org/~bfields/linux:
  nfsd: fix oops on unsupported operation

Pull networking fixes from David Miller:

 1) Don't race in IPSEC dumps, from Yuejie Shi.

 2) Verify lengths properly in IPSEC reqeusts, from Herbert Xu.

 3) Fix out of bounds access in ipv6 segment routing code, from David
    Lebrun.

 4) Don't write into the header of cloned SKBs in smsc95xx driver, from
    James Hughes.

 5) Several other drivers have this bug too, fix them. From Eric
    Dumazet.

 6) Fix access to uninitialized data in TC action cookie code, from
    Wolfgang Bumiller.

 7) Fix double free in IPV6 segment routing, again from David Lebrun.

 8) Don't let userspace set the RTF_PCPU flag, oops. From David Ahern.

 9) Fix use after free in qrtr code, from Dan Carpenter.

10) Don't double-destroy devices in ip6mr code, from Nikolay
    Aleksandrov.

11) Don't pass out-of-range TX queue indices into drivers, from Tushar
    Dave.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits)
  netpoll: Check for skb->queue_mapping
  ip6mr: fix notification device destruction
  bpf, doc: update bpf maintainers entry
  net: qrtr: potential use after free in qrtr_sendmsg()
  bpf: Fix values type used in test_maps
  net: ipv6: RTF_PCPU should not be settable from userspace
  gso: Validate assumption of frag_list segementation
  kaweth: use skb_cow_head() to deal with cloned skbs
  ch9200: use skb_cow_head() to deal with cloned skbs
  lan78xx: use skb_cow_head() to deal with cloned skbs
  sr9700: use skb_cow_head() to deal with cloned skbs
  cx82310_eth: use skb_cow_head() to deal with cloned skbs
  smsc75xx: use skb_cow_head() to deal with cloned skbs
  ipv6: sr: fix double free of skb after handling invalid SRH
  MAINTAINERS: Add "B:" field for networking.
  net sched actions: allocate act cookie early
  qed: Fix issue in populating the PFC config paramters.
  qed: Fix possible system hang in the dcbnl-getdcbx() path.
  qed: Fix sending an invalid PFC error mask to MFW.
  qed: Fix possible error in populating max_tc field.
  ...

We are not supposed to add new entries to this thing
any more.

Thanks to Eric Dumazet for noticing this.
Signed-off-by: David S. Miller <davem@davemloft.net>

Reducing real_num_tx_queues needs to be in sync with skb queue_mapping
otherwise skbs with queue_mapping greater than real_num_tx_queues
can be sent to the underlying driver and can result in kernel panic.

One such event is running netconsole and enabling VF on the same
device. Or running netconsole and changing number of tx queues via
ethtool on same device.

e.g.
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 0000000000001525
tsk->{mm,active_mm}->pgd = fff800130ff9a000
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
kworker/48:1(475): Oops [#1]
CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G           OE
4.11.0-rc3-davem-net+ #7
Workqueue: events queue_process
task: fff80013113299c0 task.stack: fff800131132c000
TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y:
00000000    Tainted: G           OE
TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]>
g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3:
0000000000000001
g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7:
00000000000000c0
o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3:
0000000000000003
o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc:
000000000049ed94
RPC: <set_next_entity+0x34/0xb80>
l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3:
0000000000000000
l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7:
fff8001fa7605028
i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3:
0000000000000000
i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7:
00000000103fa4b0
I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]>
Call Trace:
 [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe]
 [0000000000998c74] netpoll_start_xmit+0xf4/0x200
 [0000000000998e10] queue_process+0x90/0x160
 [0000000000485fa8] process_one_work+0x188/0x480
 [0000000000486410] worker_thread+0x170/0x4c0
 [000000000048c6b8] kthread+0xd8/0x120
 [0000000000406064] ret_from_fork+0x1c/0x2c
 [0000000000000000]           (null)
Disabling lock debugging due to kernel taint
Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe]
Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200
Caller[0000000000998e10]: queue_process+0x90/0x160
Caller[0000000000485fa8]: process_one_work+0x188/0x480
Caller[0000000000486410]: worker_thread+0x170/0x4c0
Caller[000000000048c6b8]: kthread+0xd8/0x120
Caller[0000000000406064]: ret_from_fork+0x1c/0x2c
Caller[0000000000000000]:           (null)
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>