- 16 Nov, 2022 12 commits
-
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Remove phylink_validate() from Felix DSA driver The Felix DSA driver still uses its own phylink_validate() procedure rather than the (relatively newly introduced) phylink_generic_validate() because the latter did not cater for the case where a PHY provides rate matching between the Ethernet cable side speed and the SERDES side speed (and does not advertise other speeds except for the SERDES speed). This changed with Sean Anderson's generic support for rate matching PHYs in phylib and phylink: https://patchwork.kernel.org/project/netdevbpf/cover/20220920221235.1487501-1-sean.anderson@seco.com/ Building upon that support, this patch set makes Linux understand that the PHYs used in combination with the Felix DSA driver (SCH-30841 riser card with AQR412 PHY, used with SERDES protocol 0x7777 - 4x2500base-x, plugged into LS1028A-QDS) do support PAUSE rate matching. This requires Aquantia PHY driver support for new PHY IDs. To activate the rate matching support in phylink, config->mac_capabilities must be populated. Coincidentally, this also opts the Felix driver into the generic phylink validation. Next, code that is no longer necessary is eliminated. This includes the Felix driver validation procedures for VSC9959 and VSC9953, the workaround in the Ocelot switch library to leave RX flow control always enabled, as well as DSA plumbing necessary for a custom phylink validation procedure to be propagated to the hardware driver level. Many thanks go to Sean Anderson for providing generic support for rate matching. ==================== Link: https://lore.kernel.org/r/20221114170730.2189282-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
As of now, no DSA driver uses a custom link mode validation procedure anymore. So remove this DSA operation and let phylink determine what is supported based on config->mac_capabilities (if provided by the driver). Leave a comment why we left the code that we did, and that there is more work to do. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
As phylink gained generic support for PHYs with rate matching via PAUSE frames, the phylink_mac_link_up() method will be called with the maximum speed and with rx_pause=true if rate matching is in use. This means that setups with 2500base-x as the SERDES protocol between the MAC/PCS and the PHY now work with no need for the driver to do anything special. Tested with fsl-ls1028a-qds-7777.dts. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Drop the custom implementation of phylink_validate() in favor of the generic one, which requires config->mac_capabilities to be set. This was used up until now because of the possibility of being paired with Aquantia PHYs with support for rate matching. The phylink framework gained generic support for these, and knows to advertise all 10/100/1000 lower speed link modes when our SERDES protocol is 2500base-x (fixed speed). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
These are Gen3 Aquantia N-BASET PHYs which support 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX (not 10G); also EEE, Sync-E, PTP, PoE. The 112 is a single PHY package, the 412 is a quad PHY package. The system-side SERDES interface of these PHYs selects its protocol depending on the negotiated media side link speed. That protocol can be 1000BASE-X, 2500BASE-X, 10GBASE-R, SGMII, USXGMII. The configuration of which SERDES protocol to use for which link speed is made by firmware; even though it could be overwritten over MDIO by Linux, we assume that the firmware provisioning is ok for the board on which the driver probes. For cases when the system side runs at a fixed rate, we want phylib/phylink to detect the PAUSE rate matching ability of these PHYs, so we need to use the Aquantia rather than the generic C45 driver. This needs aqr107_read_status() -> aqr107_read_rate() to set phydev->rate_matching, as well as the aqr107_get_rate_matching() method. I am a bit unsure about the naming convention in the driver. Since AQR107 is a Gen2 PHY, I assume all functions prefixed with "aqr107_" rather than "aqr_" mean Gen2+ features. So I've reused this naming convention. I've tested PHY "SGMII" statistics as well as the .link_change_notify method, which prints: Aquantia AQR412 mdio_mux-0.4:00: Link partner is Aquantia PHY, FW 4.3, fast-retrain downshift advertised, fast reframe advertised Tested SERDES protocols are usxgmii and 2500base-x (the latter with PAUSE rate matching). Tested link modes are 100/1000/2500 Base-T (with Aquantia link partner and with other link partners). No notable events observed. The placement of these PHY IDs in the driver is right before AQR113C, a Gen4 PHY. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next 1) Fix sparse warning in the new nft_inner expression, reported by Jakub Kicinski. 2) Incorrect vlan header check in nft_inner, from Peng Wu. 3) Two patches to pass reset boolean to expression dump operation, in preparation for allowing to reset stateful expressions in rules. This adds a new NFT_MSG_GETRULE_RESET command. From Phil Sutter. 4) Inconsistent indentation in nft_fib, from Jiapeng Chong. 5) Speed up siphash calculation in conntrack, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: conntrack: use siphash_4u64 netfilter: rpfilter/fib: clean up some inconsistent indenting netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET netfilter: nf_tables: Extend nft_expr_ops::dump callback parameters netfilter: nft_inner: fix return value check in nft_inner_parse_l2l3() netfilter: nft_payload: use __be16 to store gre version ==================== Link: https://lore.kernel.org/r/20221115095922.139954-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Walter Heymans authored
The NFP documentation is updated to include information about Corigine, and the new NFP3800 chips. The 'Acquiring Firmware' section is updated with new information about where to find firmware. Two new sections are added to expand the coverage of the documentation. The new sections include: - Devlink Info - Configure Device Signed-off-by: Walter Heymans <walter.heymans@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20221115090834.738645-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Felix Fietkau says: ==================== mtk_eth_soc rx vlan offload improvement + dsa hardware untag support This series improves rx vlan offloading on mtk_eth_soc and extends it to support hardware DSA untagging where possible. This improves performance by avoiding calls into the DSA tag driver receive function, including mangling of skb->data. This is split out of a previous series, which added other fixes and multiqueue support ==================== Link: https://lore.kernel.org/r/20221114124214.58199-1-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
- pass the tag to DSA via metadata dst - disabled on 7986 for now, since it's not working yet - disabled if a MAC is enabled that does not use DSA This improves performance by bypassing the DSA tag driver and avoiding extra skb data mangling Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Keep the vlan rx offload feature in sync across all netdevs belonging to the device, since the feature is global and can't be turned off per MAC Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Use the id from the DMA descriptor instead of hardcoding 802.1q Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
If a metadata dst is present with the type METADATA_HW_PORT_MUX on a dsa cpu port netdev, assume that it carries the port number and that there is no DSA tag present in the skb data. Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 15 Nov, 2022 10 commits
-
-
Daniel Machon authored
This patch fixes a frame size warning, reported by kernel test robot. >> net/dcb/dcbnl.c:1230:1: warning: the frame size of 1244 bytes is >> larger than 1024 bytes [-Wframe-larger-than=] The getapptrust part of dcbnl_ieee_fill is moved to a separate function, and the selector array is now dynamically allocated, instead of stack allocated. Tested on microchip sparx5 driver. Fixes: 6182d587 ("net: dcb: add new apptrust attribute") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20221114092950.2490451-1-daniel.machon@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Florian Westphal authored
This function is used for every packet, siphash_4u64 is noticeably faster than using local buffer + siphash: Before: 1.23% kpktgend_0 [kernel.vmlinux] [k] __siphash_unaligned 0.14% kpktgend_0 [nf_conntrack] [k] hash_conntrack_raw After: 0.79% kpktgend_0 [kernel.vmlinux] [k] siphash_4u64 0.15% kpktgend_0 [nf_conntrack] [k] hash_conntrack_raw In the pktgen test this gives about ~2.4% performance improvement. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Jiapeng Chong authored
No functional modification involved. net/ipv4/netfilter/nft_fib_ipv4.c:141 nft_fib4_eval() warn: inconsistent indenting. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2733Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Phil Sutter authored
Analogous to NFT_MSG_GETOBJ_RESET, but for rules: Reset stateful expressions like counters or quotas. The latter two are the only consumers, adjust their 'dump' callbacks to respect the parameter introduced earlier. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Phil Sutter authored
Add a 'reset' flag just like with nft_object_ops::dump. This will be useful to reset "anonymous stateful objects", e.g. simple rule counters. No functional change intended. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Jamie Bainbridge authored
The SYN flood message prints the listening port number, but with many processes bound to the same port on different IPs, it's impossible to tell which socket is the problem. Add the listen IP address to the SYN flood message. For IPv6 use "[IP]:port" as per RFC-5952 and to provide ease of copy-paste to "ss" filters. For IPv4 use "IP:port" to match. Each protcol's "any" address and a host address now look like: Possible SYN flooding on port 0.0.0.0:9001. Possible SYN flooding on port 127.0.0.1:9001. Possible SYN flooding on port [::]:9001. Possible SYN flooding on port [fc00::1]:9001. Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/4fedab7ce54a389aeadbdc639f6b4f4988e9d2d7.1668386107.git.jamie.bainbridge@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Thomas Gleixner says: ==================== genirq/msi: Treewide cleanup of pointless linux/msi.h includes While working on per device MSI domains I noticed that quite some files include linux/msi.h just because. The top level comment in the header file clearly says: Regular device drivers have no business with any of these functions.... and actually none of the drivers needs anything from msi.h. ==================== Link: https://lore.kernel.org/r/20221113201935.776707081@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Thomas Gleixner authored
Nothing in these files needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: oss-drivers@corigine.com Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Thomas Gleixner authored
Nothing in these file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yoshihiro Shimoda authored
If CONFIG_PTP_1588_CLOCK_OPTIONAL=m and CONFIG_RENESAS_ETHER_SWITCH=y, the following build error happened: aarch64-linux-ld: DWARF error: could not find abbrev number 60 drivers/net/ethernet/renesas/rswitch.o: in function `rswitch_get_ts_info': rswitch.c:(.text+0x408): undefined reference to `ptp_clock_index' aarch64-linux-ld: DWARF error: could not find abbrev number 1190123 drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_register': rcar_gen4_ptp.c:(.text+0x4dc): undefined reference to `ptp_clock_register' aarch64-linux-ld: drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_unregister': rcar_gen4_ptp.c:(.text+0x584): undefined reference to `ptp_clock_unregister' To fix the issue, add "depends on PTP_1588_CLOCK_OPTIONAL" into the Kconfig. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6c6fa1a0 ("net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221110012720.3552060-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 14 Nov, 2022 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2022-11-12 Misc updates to mlx5 driver 1) Support enhanced CQE compression, on ConnectX6-Dx Reduce irq rate, cpu utilization and latency. 2) Connection tracking: Optimize the pre_ct table lookup for rules installed on chain 0. 3) implement ethtool get_link_ext_stats for PHY down events 4) Expose device vhca_id to debugfs 5) misc cleanups and trivial changes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shenwei Wang authored
Added xdp and page pool statistics. In order to make the implementation simple and compatible, the patch uses the 32bit integer to record the XDP statistics. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Steen Hegelund says: ==================== net: Add support for sorted VCAP rules in Sparx5 This provides support for adding Sparx5 VCAP rules in sorted order, VCAP rule counters and TC filter matching on ARP frames. It builds on top of the initial IS2 VCAP support found in these series: https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/ Functionality ============= When a new VCAP rule is added the driver will now ensure that the rule is inserted in sorted order, and when a rule is removed, the remaining rules will be moved to keep the sorted order and remove any gaps in the VCAP address space. A VCAP rule is ordered using these 3 values: - Rule size: the count of VCAP addresses used by the rule. The largest rule have highest priority - Rule User: The rules are ordered by the user enumeration - Priority: The priority provided in the flower filter. The lowest value has the highest priority. A VCAP instance may contain the counter as part of the VCAP cache area, and this counter may be one or more bits in width. This type of counter automatically increments its value when the rule is hit. Other VCAP instances have a dedicated counter area outside of the VCAP and in this case the rule must contain the counter id to be able to locate the counter value and cause the counter to be incremented. In this case there must also be a VCAP rule action that sets the counter id. The Sparx5 IS2 VCAP uses a dedicated counter area with 32bit counters. This series adds support for getting VCAP rule counters and provide these via the TC statistic interface. This only support packet counters, not byte counters. Finally the series adds support for the ARP frame dissector and configures the Sparx5 IS2 VCAP to generate the ARP keyset when ARP traffic is received. Delivery: ========= This is current plan for delivering the full VCAP feature set of Sparx5: - DebugFS support for inspecting rules - TC protocol all support - Sparx5 IS0 VCAP support - TC policer and drop action support (depends on the Sparx5 QoS support upstreamed separately) - Sparx5 ES0 VCAP support - TC flower template support - TC matchall filter support for mirroring and policing ports - TC flower filter mirror action support - Sparx5 ES2 VCAP support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This tests the insert, move and deleting of rules and checks that the unused VCAP addresses are initialized correctly. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This provides flower filter packet statistics (bytes are not supported) via the dedicated IS2 counter feature. All rules having the same TC cookie will contribute to the packet statistics for the filter as they are considered to be part of the same TC flower filter. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This adds API methods to set and get a rule counter. A VCAP instance may contain the counter as part of the VCAP cache area, and this counter may be one or more bits in width. This type of counter automatically increments it value when the rule is hit. Other VCAP instances have a dedicated counter area outside of the VCAP and in this case the rule must contain the counter id to be able to locate the counter value. In this case there must also be a rule action that updates the counter using the rule id when the rule is hit. The Sparx5 IS2 VCAP uses a dedicated counter area. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This adds a sorting criteria to rule insertion and deletion. The criteria is (in the listed order): - Rule size (largest size first) - User (based on an enumerated user value) - Priority (highest priority first, aka lowest value) When a rule is deleted the other rules may need to be moved to fill the gap to use the available VCAP address space in the best possible way. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This add support for Sparx5 for dissecting TC ARP flower filter keys and sets up the Sparx5 IS2 VCAP to generate the ARP keyset for ARP frames. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steen Hegelund authored
This adds a new flow_rule_match_arp function that allows drivers to be able to dissect ARP frames. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
xu xin authored
The value of 'st->state' has been verified as "TCP_SEQ_STATE_LISTENING", it's unnecessary to assign TCP_SEQ_STATE_LISTENING to it, so we can remove it. Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nick Child says: ==================== ibmvnic: Introduce affinity hint support This is a patchset to do 3 things to improve ibmvnic performance: 1. Assign affinity hints to ibmvnic queue irq's 2. Update affinity hints on cpu hotplug events 3. Introduce transmit packet steering (XPS) NOTE: If irqbalance is running, you need to stop it from overriding our affinity hints. To do this you can do one of: - systemctl stop irqbalance - ban the ibmvnic module irqs - you must have the latest irqbalance v9.2, the banmod argument was broken before this - in /etc/sysconfig/irqbalance -> IRQBALANCE_ARGS="--banmod=ibmvnic" - systemctl restart irqbalance ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nick Child authored
Transmit Packet Steering (XPS) maps cpu numbers to transmit queues. By running the same connection on the same set of cpu's, contention for the queue and cache miss rate can be minimized. When assigning a cpu mask for a tranmit queues irq number, assign the same cpu mask as the set of cpu's that XPS should use for that queue. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nick Child authored
When CPU's are added and removed, ibmvnic devices will reassign hint values. Introduce a new cpu hotplug state CPUHP_IBMVNIC_DEAD to signal to ibmvnic devices that the CPU has been removed and it is time to reset affinity hint assignments. On the other hand, when CPU's are being added, add a state instance to CPUHP_AP_ONLINE_DYN which will trigger a reassignment of affinity hints once the new CPU's are online. This implementation is based on the virtio_net driver. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nick Child authored
Assign affinity hints to ibmvnic device queue interrupts. Affinity hints are assigned and removed during sub-crq init and teardown, respectively. This update should improve latency if utilized as interrupt lines and processing are more equally distributed among CPU's. This implementation is based on the virtio_net driver. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Md Fahad Iqbal Polash authored
Add support for 2 virtchnl msgs: VIRTCHNL_OP_SET_RSS_HENA VIRTCHNL_OP_GET_RSS_HENA_CAPS The first one allows VFs to clear all previously programmed RSS configuration and customize it. The second one returns the RSS HENA bits allowed by the hardware. Introduce ice_err_to_virt_err which converts kernel specific errors to virtchnl errors. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chuang Wang authored
The error handling in tun_get_user is very scattered. This patch unifies error handling, reduces duplication of code, and makes the logic clearer. Signed-off-by: Chuang Wang <nashuiliang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Nov, 2022 2 commits
-
-
Saeed Mahameed authored
Implement ethtool_op get_link_ext_stats for PHY down events Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com>
-
Oz Shlomo authored
The pre_ct table realizes in hardware the act_ct cache logic, bypassing the CT table if the ct state was already set by a previous ct lookup. As such, the pre_ct table will always miss for chain 0 filters. Optimize the pre_ct table lookup for rules installed on chain 0. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-