- 19 Oct, 2018 40 commits
-
-
Sudeep Holla authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit a946e8c7 upstream. In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt and marks it pending and suspended, disables it and notifies the pm core about the wake event. The interrupt gets handled later once the system is resumed. However the irq stats is updated twice: once when it's disabled waiting for the system to resume and later when it's handled, resulting in wrong counting of the wakeup interrupt when waking up the system. This patch updates the interrupt count so that it's updated only when the interrupt gets handled. It's already handled correctly in handle_edge_irq and handle_edge_eoi_irq. Reported-by:
Manoil Claudiu <claudiu.manoil@freescale.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Chas Williams authored
BugLink: https://bugs.launchpad.net/bugs/1797563 Commit cdbf9267 ("mm: numa: avoid waiting on freed migrated pages") was an incomplete backport of the upstream commit. It is necessary to always reset page_nid before attempting any early exit. The original commit conflicted due to lack of commit 82b0f8c3 ("mm: join struct fault_env and vm_fault") in 4.9 so it wasn't a clean application, and the change must have just gotten lost in the noise. Signed-off-by:
Chas Williams <chas3@att.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit cb5c6568 upstream. In commit ab123fe0 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe0 ("enic: handle mtu change for vf properly") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Fabio Estevam authored
BugLink: https://bugs.launchpad.net/bugs/1797563 This reverts commit 0d0af17a. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable@vger.kernel.org> #4.4 Reported-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit 914b087f upstream. When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status: Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Change the Error to a Warning because "not all build hosts for cross compiling Linux are Linux systems and are able to provide a working port of depmod, especially at the file patch /sbin/depmod." I.e., "make modules_install" may be used to copy/install the loadable modules files to a target directory on a build system and then transferred to an embedded device where /sbin/depmod is run instead of it being run on the build system. Fixes: 934193a6 ("kbuild: verify that $DEPMOD is installed") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit b2d7a075 upstream. Using only 32-bit writes for the pte will result in an intermediate L1TF vulnerable PTE. When running as a Xen PV guest this will at once switch the guest to shadow mode resulting in a loss of performance. Use arch_atomic64_xchg() instead which will perform the requested operation atomically with all 64 bits. Some performance considerations according to: https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf The main number should be the latency, as there is no tight loop around native_ptep_get_and_clear(). "lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a memory operand) isn't mentioned in that document. "lock xadd" (with xadd having 3 cycles less latency than xchg) has a latency of 11, so we can assume a latency of 14 for "lock xchg". Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> [ Atomic operations gained an arch_ prefix in 8bf705d1 ("locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h") so s/arch_atomic64_xchg/atomic64_xchg/ for backport.] Signed-off-by:
-
Joel Fernandes (Google) authored
BugLink: https://bugs.launchpad.net/bugs/1797563 commit fc91a3c4 upstream. While debugging an issue debugobject tracking warned about an annotation issue of an object on stack. It turned out that the issue was due to the object in concern being on a different stack which was due to another issue. Thomas suggested to print the pointers and the location of the stack for the currently running task. This helped to figure out that the object was on the wrong stack. As this is general useful information for debugging similar issues, make the error message more informative by printing the pointers. [ tglx: Massaged changelog ] Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: kernel-team@android.com Cc: Arnd Bergmann <arnd@arndb.de> Cc: astrachan@google.com Link: https://lkml.kernel.org/r/20180723212531.202328-1-joel@joelfernandes.orgSigned-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 43794446 ] [BUG] Under certain KVM load and LTP tests, it is possible to hit the following calltrace if quota is enabled: BTRFS critical (device vda2): unable to find logical 8820195328 length 4096 BTRFS critical (device vda2): unable to find logical 8820195328 length 4096 WARNING: CPU: 0 PID: 49 at ../block/blk-core.c:172 blk_status_to_errno+0x1a/0x30 CPU: 0 PID: 49 Comm: kworker/u2:1 Not tainted 4.12.14-15-default #1 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] task: ffff9f827b340bc0 task.stack: ffffb4f8c0304000 RIP: 0010:blk_status_to_errno+0x1a/0x30 Call Trace: submit_extent_page+0x191/0x270 [btrfs] ? btrfs_create_repair_bio+0x130/0x130 [btrfs] __do_readpage+0x2d2/0x810 [btrfs] ? btrfs_create_repair_bio+0x130/0x130 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] __extent_read_full_page+0xe7/0x100 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] read_extent_buffer_pages+0x1ab/0x2d0 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] btree_read_extent_buffer_pages+0x94/0xf0 [btrfs] read_tree_block+0x31/0x60 [btrfs] read_block_for_search.isra.35+0xf0/0x2e0 [btrfs] btrfs_search_slot+0x46b/0xa00 [btrfs] ? kmem_cache_alloc+0x1a8/0x510 ? btrfs_get_token_32+0x5b/0x120 [btrfs] find_parent_nodes+0x11d/0xeb0 [btrfs] ? leaf_space_used+0xb8/0xd0 [btrfs] ? btrfs_leaf_free_space+0x49/0x90 [btrfs] ? btrfs_find_all_roots_safe+0x93/0x100 [btrfs] btrfs_find_all_roots_safe+0x93/0x100 [btrfs] btrfs_find_all_roots+0x45/0x60 [btrfs] btrfs_qgroup_trace_extent_post+0x20/0x40 [btrfs] btrfs_add_delayed_data_ref+0x1a3/0x1d0 [btrfs] btrfs_alloc_reserved_file_extent+0x38/0x40 [btrfs] insert_reserved_file_extent.constprop.71+0x289/0x2e0 [btrfs] btrfs_finish_ordered_io+0x2f4/0x7f0 [btrfs] ? pick_next_task_fair+0x2cd/0x530 ? __switch_to+0x92/0x4b0 btrfs_worker_helper+0x81/0x300 [btrfs] process_one_work+0x1da/0x3f0 worker_thread+0x2b/0x3f0 ? process_one_work+0x3f0/0x3f0 kthread+0x11a/0x130 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x35/0x40 BTRFS critical (device vda2): unable to find logical 8820195328 length 16384 BTRFS: error (device vda2) in btrfs_finish_ordered_io:3023: errno=-5 IO failure BTRFS info (device vda2): forced readonly BTRFS error (device vda2): pending csums is 2887680 [CAUSE] It's caused by race with block group auto removal: - There is a meta block group X, which has only one tree block The tree block belongs to fs tree 257. - In current transaction, some operation modified fs tree 257 The tree block gets COWed, so the block group X is empty, and marked as unused, queued to be deleted. - Some workload (like fsync) wakes up cleaner_kthread() Which will call btrfs_delete_unused_bgs() to remove unused block groups. So block group X along its chunk map get removed. - Some delalloc work finished for fs tree 257 Quota needs to get the original reference of the extent, which will read tree blocks of commit root of 257. Then since the chunk map gets removed, the above warning gets triggered. [FIX] Just let btrfs_delete_unused_bgs() skip block group which still has pinned bytes. However there is a minor side effect: currently we only queue empty blocks at update_block_group(), and such empty block group with pinned bytes won't go through update_block_group() again, such block group won't be removed, until it gets new extent allocated and removed. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 389305b2 ] Invalid reloc tree can cause kernel NULL pointer dereference when btrfs does some cleanup of the reloc roots. It turns out that fs_info::reloc_ctl can be NULL in btrfs_recover_relocation() as we allocate relocation control after all reloc roots have been verified. So when we hit: note, we haven't called set_reloc_control() thus fs_info::reloc_ctl is still NULL. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199833Reported-by:
Xu Wen <wen.xu@gatech.edu> Signed-off-by:
Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by:
-
Misono Tomohiro authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 1e7e1f9e ] on-disk devs stats value is updated in btrfs_run_dev_stats(), which is called during commit transaction, if device->dev_stats_ccnt is not zero. Since current replace operation does not touch dev_stats_ccnt, on-disk dev stats value is not updated. Therefore "btrfs device stats" may return old device's value after umount/mount (Example: See "btrfs ins dump-t -t DEV $DEV" after btrfs/100 finish). Fix this by just incrementing dev_stats_ccnt in btrfs_dev_replace_finishing() when replace is succeeded and this will update the values. Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Reviewed-by:
-
Mahesh Salgaonkar authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 74e96bf4 ] The global mce data buffer that used to copy rtas error log is of 2048 (RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read extended_log_length from rtas error log header, then use max of extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied. Ideally the platform (phyp) will never send extended error log with size > 2048. But if that happens, then we have a risk of buffer overrun and corruption. Fix this by using min_t instead. Fixes: d368514c ("powerpc: Fix corruption when grabbing FWNMI data") Reported-by:
Michal Suchanek <msuchanek@suse.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 289131e1 ] For SMB2/SMB3 the number of requests sent was not displayed in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was enabled (only number of failed requests displayed). As with earlier dialects, we should be displaying these counters if CONFIG_CIFS_STATS is enabled. They are important for debugging. e.g. when you cat /proc/fs/cifs/Stats (before the patch) Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 690 maximum at one time: 2 1) \\localhost\test SMBs: 975 Negotiates: 0 sent 0 failed SessionSetups: 0 sent 0 failed Logoffs: 0 sent 0 failed TreeConnects: 0 sent 0 failed TreeDisconnects: 0 sent 0 failed Creates: 0 sent 2 failed Closes: 0 sent 0 failed Flushes: 0 sent 0 failed Reads: 0 sent 0 failed Writes: 0 sent 0 failed Locks: 0 sent 0 failed IOCTLs: 0 sent 1 failed Cancels: 0 sent 0 failed Echos: 0 sent 0 failed QueryDirectories: 0 sent 63 failed Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit c281bc0c ] echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats but there were four (see example below) that were not reset (bytes read and witten, total vfs ops and max ops at one time). ... 0 session 0 share reconnects Total vfs operations: 100 maximum at one time: 2 1) \\localhost\test SMBs: 0 Bytes read: 502092 Bytes written: 31457286 TreeConnects: 0 total 0 failed TreeDisconnects: 0 total 0 failed ... This patch fixes cifs_stats_proc_write to properly reset those four. Signed-off-by:
-
Breno Leitao authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 7c27a26e ] There are some powerpc selftests, as tm/tm-unavailable, that run for a long period (>120 seconds), and if it is interrupted, as pressing CRTL-C (SIGINT), the foreground process (harness) dies but the child process and threads continue to execute (with PPID = 1 now) in background. In this case, you'd think the whole test exited, but there are remaining threads and processes being executed in background. Sometimes these zombies processes are doing annoying things, as consuming the whole CPU or dumping things to STDOUT. This patch fixes this problem by attaching an empty signal handler to SIGINT in the harness process. This handler will interrupt (EINTR) the parent process waitpid() call, letting the code to follow through the normal flow, which will kill all the processes in the child process group. This patch also fixes a typo. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit e083926b ] The PFI subdevice flags indicate that the subdevice is readable and writeable, but that is only true for the supported "M-series" boards, not the older "E-series" boards. Only set the SDF_READABLE and SDF_WRITABLE subdevice flags for the M-series boards. These two flags are mainly for informational purposes. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
John Pittman authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 784c9a29 ] It was reported that softlockups occur when using dm-snapshot ontop of slow (rbd) storage. E.g.: [ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177] ... [ 4048.034151] Workqueue: kcopyd do_work [dm_mod] [ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot] ... [ 4048.034190] Call Trace: [ 4048.034196] ? __chunk_is_tracked+0x70/0x70 [dm_snapshot] [ 4048.034200] run_complete_job+0x5f/0xb0 [dm_mod] [ 4048.034205] process_jobs+0x91/0x220 [dm_mod] [ 4048.034210] ? kcopyd_put_pages+0x40/0x40 [dm_mod] [ 4048.034214] do_work+0x46/0xa0 [dm_mod] [ 4048.034219] process_one_work+0x171/0x370 [ 4048.034221] worker_thread+0x1fc/0x3f0 [ 4048.034224] kthread+0xf8/0x130 [ 4048.034226] ? max_active_store+0x80/0x80 [ 4048.034227] ? kthread_bind+0x10/0x10 [ 4048.034231] ret_from_fork+0x35/0x40 [ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks Fix this by calling cond_resched() after run_complete_job()'s callout to the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above trace). Signed-off-by:
John Pittman <jpittman@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit dfd0309f ] pcie->realio.end should be the address of last byte of the area, therefore using resource_size() of another resource is not correct, we must substract 1 to get the address of the last byte. Fixes: 11be6547 ("PCI: mvebu: Adapt to the new device tree layout") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 0756c57b ] We accidentally return success instead of -ENOMEM on this error path. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stefan Haberland authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 669f3765 ] During offline processing two worker threads are canceled without freeing the device reference which leads to a hanging offline process. Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit c42d3be0 ] The problem is the the calculation should be "end - start + 1" but the plus one is missing in this calculation. Fixes: 8626816e ("powerpc: add support for MPIC message register API") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Jean-Philippe Brucker authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 92aef467 ] Currently when virtio_find_single_vq fails, we go through del_vqs which throws a warning (Trying to free already-free IRQ). Skip del_vqs if vq allocation failed. Link: http://lkml.kernel.org/r/20180524101021.49880-1-jean-philippe.brucker@arm.comSigned-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by:
Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Jonas Gorski authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 0702bc4d ] When compiling bmips with SMP disabled, the build fails with: drivers/irqchip/irq-bcm7038-l1.o: In function `bcm7038_l1_cpu_offline': drivers/irqchip/irq-bcm7038-l1.c:242: undefined reference to `irq_set_affinity_locked' make[5]: *** [vmlinux] Error 1 Fix this by adding and setting bcm7038_l1_cpu_offline only when actually compiling for SMP. It wouldn't have been used anyway, as it requires CPU_HOTPLUG, which in turn requires SMP. Fixes: 34c53579 ("irqchip/bcm7038-l1: Implement irq_cpu_offline() callback") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Aleh Filipovich authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 880b29ac ] Add entry to WMI keymap for lid flip event on Asus UX360. On Asus Zenbook ux360 flipping lid from/to tablet mode triggers keyscan code 0xfa which cannot be handled and results in kernel log message "Unknown key fa pressed". Signed-off-by: Aleh Filipovich<aleh@appnexus.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 2f606da7 ] Instantiating the sm501 OHCI subdevice results in a kernel warning. sm501-usb sm501-usb: SM501 OHCI sm501-usb sm501-usb: new USB bus registered, assigned bus number 1 WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 ohci_init+0x194/0x2d8 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc7-00178-g0b5b1f9a #1 PC is at ohci_init+0x194/0x2d8 PR is at ohci_init+0x168/0x2d8 PC : 8c27844c SP : 8f81dd94 SR : 40008001 TEA : 29613060 R0 : 00000000 R1 : 00000000 R2 : 00000000 R3 : 00000202 R4 : 8fa98b88 R5 : 8c277e68 R6 : 00000000 R7 : 00000000 R8 : 8f965814 R9 : 8c388100 R10 : 8fa98800 R11 : 8fa98928 R12 : 8c48302c R13 : 8fa98920 R14 : 8c48302c MACH: 00000096 MACL: 0000017c GBR : 00000000 PR : 8c278420 Call trace: [<(ptrval)>] usb_add_hcd+0x1e8/0x6ec [<(ptrval)>] _dev_info+0x0/0x54 [<(ptrval)>] arch_local_save_flags+0x0/0x8 [<(ptrval)>] arch_local_irq_restore+0x0/0x24 [<(ptrval)>] ohci_hcd_sm501_drv_probe+0x114/0x2d8 ... Initialize coherent_dma_mask when creating SM501 subdevices to fix the problem. Fixes: b6d6454f ("mfd: SM501 core driver") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Tan Hu authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit a53b42c1 ] We came across infinite loop in ipvs when using ipvs in docker env. When ipvs receives new packets and cannot find an ipvs connection, it will create a new connection, then if the dest is unavailable (i.e. IP_VS_DEST_F_AVAILABLE), the packet will be dropped sliently. But if the dropped packet is the first packet of this connection, the connection control timer never has a chance to start and the ipvs connection cannot be released. This will lead to memory leak, or infinite loop in cleanup_net() when net namespace is released like this: ip_vs_conn_net_cleanup at ffffffffa0a9f31a [ip_vs] __ip_vs_cleanup at ffffffffa0a9f60a [ip_vs] ops_exit_list at ffffffff81567a49 cleanup_net at ffffffff81568b40 process_one_work at ffffffff810a851b worker_thread at ffffffff810a9356 kthread at ffffffff810b0b6f ret_from_fork at ffffffff81697a18 race condition: CPU1 CPU2 ip_vs_in() ip_vs_conn_new() ip_vs_del_dest() __ip_vs_unlink_dest() ~IP_VS_DEST_F_AVAILABLE cp->dest && !IP_VS_DEST_F_AVAILABLE __ip_vs_conn_put ... cleanup_net ---> infinite looping Fix this by checking whether the timer already started. Signed-off-by:
Tan Hu <tan.hu@zte.com.cn> Reviewed-by:
Jiang Biao <jiang.biao2@zte.com.cn> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 6cd00a01 ] Since only dentry->d_name.len + 1 bytes out of DNAME_INLINE_LEN bytes are initialized at __d_alloc(), we can't copy the whole size unconditionally. WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff8fa27465ac50) 636f6e66696766732e746d70000000000010000000000000020000000188ffff i i i i i i i i i i i i i u u u u u u u u u u i i i i i u u u u ^ RIP: 0010:take_dentry_name_snapshot+0x28/0x50 RSP: 0018:ffffa83000f5bdf8 EFLAGS: 00010246 RAX: 0000000000000020 RBX: ffff8fa274b20550 RCX: 0000000000000002 RDX: ffffa83000f5be40 RSI: ffff8fa27465ac50 RDI: ffffa83000f5be60 RBP: ffffa83000f5bdf8 R08: ffffa83000f5be48 R09: 0000000000000001 R10: ffff8fa27465ac00 R11: ffff8fa27465acc0 R12: ffff8fa27465ac00 R13: ffff8fa27465acc0 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f79737ac8c0(0000) GS:ffffffff8fc30000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8fa274c0b000 CR3: 0000000134aa7002 CR4: 00000000000606f0 take_dentry_name_snapshot+0x28/0x50 vfs_rename+0x128/0x870 SyS_rename+0x3b2/0x3d0 entry_SYSCALL_64_fastpath+0x1a/0xa4 0xffffffffffffffff Link: http://lkml.kernel.org/r/201709131912.GBG39012.QMJLOVFSFFOOtH@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrey Ryabinin authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit a718e28f ] Signed integer overflow is undefined according to the C standard. The overflow in ksys_fadvise64_64() is deliberate, but since it is signed overflow, UBSAN complains: UBSAN: Undefined behaviour in mm/fadvise.c:76:10 signed integer overflow: 4 + 9223372036854775805 cannot be represented in type 'long long int' Use unsigned types to do math. Unsigned overflow is defined so UBSAN will not complain about it. This patch doesn't change generated code. [akpm@linux-foundation.org: add comment explaining the casts] Link: http://lkml.kernel.org/r/20180629184453.7614-1-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: <icytxw@gmail.com> Reviewed-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 1f3aa900 ] Fix missing error check for memory allocation functions in scripts/mod/modpost.c. Fixes kernel bugzilla #200319: https://bugzilla.kernel.org/show_bug.cgi?id=200319Signed-off-by:
-
OGAWA Hirofumi authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 0afa9626 ] On corrupted FATfs may have invalid ->i_start. To handle it, this checks ->i_start before using, and return proper error code. Link: http://lkml.kernel.org/r/87o9f8y1t5.fsf_-_@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Tested-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit a7ec7a41 ] An HFS+ filesystem can be mounted read-only without having a metadata directory, which is needed to support hardlinks. But if the catalog data is corrupted, a directory lookup may still find dentries claiming to be hardlinks. hfsplus_lookup() does check that ->hidden_dir is not NULL in such a situation, but mistakenly does so after dereferencing it for the first time. Reorder this check to prevent a crash. This happens when looking up corrupted catalog data (dentry) on a filesystem with no metadata directory (this could only ever happen on a read-only mount). Wen Xu sent the replication steps in detail to the fsdevel list: https://bugzilla.kernel.org/show_bug.cgi?id=200297 Link: http://lkml.kernel.org/r/20180712215344.q44dyrhymm4ajkao@eafSigned-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Reported-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 8b73ce6a ] This uses the deprecated time_t type but is write-only, and could be removed, but as Jeff explains, having a timestamp can be usefule for post-mortem analysis in crash dumps. In order to remove one of the last instances of time_t, this changes the type to time64_t, same as j_trans_start_time. Link: http://lkml.kernel.org/r/20180622133315.221210-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 06e62a46 ] Before this change, if a multithreaded process forks while one of its threads is changing a signal handler using sigaction(), the memcpy() in copy_sighand() can race with the struct assignment in do_sigaction(). It isn't clear whether this can cause corruption of the userspace signal handler pointer, but it definitely can cause inconsistency between different fields of struct sigaction. Take the appropriate spinlock to avoid this. I have tested that this patch prevents inconsistency between sa_sigaction and sa_flags, which is possible before this patch. Link: http://lkml.kernel.org/r/20180702145108.73189-1-jannh@google.comSigned-off-by:
Jann Horn <jannh@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit dc257279 ] hfs_find_exit() expects fd->bnode to be NULL after a search has failed. hfs_brec_insert() may instead set it to an error-valued pointer. Fix this to prevent a crash. Link: http://lkml.kernel.org/r/53d9749a029c41b4016c495fc5838c9dba3afc52.1530294815.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 7464726c ] syzbot is reporting NULL pointer dereference at mount_fs() [1]. This is because hfsplus_fill_super() is by error returning 0 when hfsplus_fill_super() detected invalid filesystem image, and mount_bdev() is returning NULL because dget(s->s_root) == NULL if s->s_root == NULL, and mount_fs() is accessing root->d_sb because IS_ERR(root) == false if root == NULL. Fix this by returning -EINVAL when hfsplus_fill_super() detected invalid filesystem image. [1] https://syzkaller.appspot.com/bug?id=21acb6850cecbc960c927229e597158cf35f33d0 Link: http://lkml.kernel.org/r/d83ce31a-874c-dd5b-f790-41405983a5be@I-love.SAKURA.ne.jpSigned-off-by:
syzbot <syzbot+01ffaf5d9568dd1609f7@syzkaller.appspotmail.com> Reviewed-by:
-
Ronnie Sahlberg authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit e6c47dd0 ] Some SMB2/3 servers, Win2016 but possibly others too, adds padding not only between PDUs in a compound but also to the final PDU. This padding extends the PDU to a multiple of 8 bytes. Check if the unexpected length looks like this might be the case and avoid triggering the log messages for : "SMB2 server sent bad RFC1001 len %d not %d\n" Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Alexey Kodanev authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 9f289546 ] Before the commit d6990976 ("vti6: fix PMTU caching and reporting on xmit") '!skb->ignore_df' check was always true because the function skb_scrub_packet() was called before it, resetting ignore_df to zero. In the commit, skb_scrub_packet() was moved below, and now this check can be false for the packet, e.g. when sending it in the two fragments, this prevents successful PMTU updates in such case. The next attempts to send the packet lead to the same tx error. Moreover, vti6 initial MTU value relies on PMTU adjustments. This issue can be reproduced with the following LTP test script: udp_ipsec_vti.sh -6 -p ah -m tunnel -s 2000 Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 63cc357f ] RFC 1337 says: ''Ignore RST segments in TIME-WAIT state. If the 2 minute MSL is enforced, this fix avoids all three hazards.'' So with net.ipv4.tcp_rfc1337=1, expected behaviour is to have TIME-WAIT sk expire rather than removing it instantly when a reset is received. However, Linux will also re-start the TIME-WAIT timer. This causes connect to fail when tying to re-use ports or very long delays (until syn retry interval exceeds MSL). packetdrill test case: // Demonstrate bogus rearming of TIME-WAIT timer in rfc1337 mode. `sysctl net.ipv4.tcp_rfc1337=1` 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 29200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 // Receive first segment 0.310 < P. 1:1001(1000) ack 1 win 46 // Send one ACK 0.310 > . 1:1(0) ack 1001 // read 1000 byte 0.310 read(4, ..., 1000) = 1000 // Application writes 100 bytes 0.350 write(4, ..., 100) = 100 0.350 > P. 1:101(100) ack 1001 // ACK 0.500 < . 1001:1001(0) ack 101 win 257 // close the connection 0.600 close(4) = 0 0.600 > F. 101:101(0) ack 1001 win 244 // Our side is in FIN_WAIT_1 & waits for ack to fin 0.7 < . 1001:1001(0) ack 102 win 244 // Our side is in FIN_WAIT_2 with no outstanding data. 0.8 < F. 1001:1001(0) ack 102 win 244 0.8 > . 102:102(0) ack 1002 win 244 // Our side is now in TIME_WAIT state, send ack for fin. 0.9 < F. 1002:1002(0) ack 102 win 244 0.9 > . 102:102(0) ack 1002 win 244 // Peer reopens with in-window SYN: 1.000 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // Therefore, reply with ACK. 1.000 > . 102:102(0) ack 1002 win 244 // Peer sends RST for this ACK. Normally this RST results // in tw socket removal, but rfc1337=1 setting prevents this. 1.100 < R 1002:1002(0) win 244 // second syn. Due to rfc1337=1 expect another pure ACK. 31.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> 31.0 > . 102:102(0) ack 1002 win 244 // .. and another RST from peer. 31.1 < R 1002:1002(0) win 244 31.2 `echo no timer restart;ss -m -e -a -i -n -t -o state TIME-WAIT` // third syn after one minute. Time-Wait socket should have expired by now. 63.0 < S 1000:1000(0) win 9200 <mss 1460,nop,nop,sackOK,nop,wscale 7> // so we expect a syn-ack & 3whs to proceed from here on. 63.0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> Without this patch, 'ss' shows restarts of tw timer and last packet is thus just another pure ack, more than one minute later. This restores the original code from commit 283fd6cf0be690a83 ("Merge in ANK networking jumbo patch") in netdev-vger-cvs.git . For some reason the else branch was removed/lost in 1f28b683339f7 ("Merge in TCP/UDP optimizations and [..]") and timer restart became unconditional. Reported-by:
Michal Tesar <mtesar@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Manish Chopra authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit 6750c870 ] qlge_fix_features() is not supposed to modify hardware or driver state, rather it is supposed to only fix requested fetures bits. Currently qlge_fix_features() also goes for interface down and up unnecessarily if there is not even any change in features set. This patch changes/fixes following - 1) Move reload of interface or device re-config from qlge_fix_features() to qlge_set_features(). 2) Reload of interface in qlge_set_features() only if relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed. 3) Get rid of qlge_fix_features() since driver is not really required to fix any features bit. Signed-off-by:
Manish <manish.chopra@cavium.com> Reviewed-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Doug Berger authored
BugLink: https://bugs.launchpad.net/bugs/1797563 [ Upstream commit c3c397c1 ] When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Greg Hackmann authored
BugLink: https://bugs.launchpad.net/bugs/1797563 The ION_IOC_{MAP,SHARE} ioctls drop and reacquire client->lock several times while operating on one of the client's ion_handles. This creates windows where userspace can call ION_IOC_FREE on the same client with the same handle, and effectively make the kernel drop its own reference. For example: - thread A: ION_IOC_ALLOC creates an ion_handle with refcount 1 - thread A: starts ION_IOC_MAP and increments the refcount to 2 - thread B: ION_IOC_FREE decrements the refcount to 1 - thread B: ION_IOC_FREE decrements the refcount to 0 and frees the handle - thread A: continues ION_IOC_MAP with a dangling ion_handle * to freed memory Fix this by holding client->lock for the duration of ION_IOC_{MAP,SHARE}, preventing the concurrent ION_IOC_FREE. Also remove ion_handle_get_by_id(), since there's literally no way to use it safely. This patch is applied on top of 4.4.y, and applies to older kernels too. 4.9.y was fixed separately. Kernels 4.12 and later are unaffected, since all the underlying ion_handle infrastructure has been ripped out. Cc: stable@vger.kernel.org # v4.4- Signed-off-by:
Greg Hackmann <ghackmann@google.com> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
