Pull "mvebu DT changes for v3.19" from Jason Cooper:

 - mvebu
    - ReadyNAS 102 leds, esata
    - ReadyNAS 2120 esata
    - Add cache-unified for Aurora L2 node
    - Add ref clk for timer and watchdog on Armada 375
    - Cleanup Armada XP pinctrl for GigE
    - Add RGMII pinctrl, i2c eeprom, and fix 74hc595 counter on Lenovo ix4-300d

 - kirkwood
    - Add DLink DIR665 and it's DSA configuration

* tag 'mvebu-dt-3.19' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: armada-xp: Fix 74hc595 count for Lenovo ix4-300d
  ARM: mvebu: armada-xp: Add I2C eeprom on Lenovo ix4-300d
  ARM: mvebu: armada-xp: Add RGMII pinctrl to Lenovo ix4-300d
  ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII
  ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII
  ARM: mvebu: armada-xp: Use pinctrl node alias
  ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address
  ARM: mvebu: armada-xp: Consolidate pinctrl node
  ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture
  ARM: Kirkwood: Add support for DLink DIR665
  ARM: mvebu: Enable rear eSATA ports of NETGEAR ReadyNAS 2120
  ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC
  arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file
  arm: mvebu: Fix LED color in NETGEAR ReadyNAS 102 .dts file
  ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "ARM: DT:  Hisilicon terminal SoC HiX5HD2 DT updates for 3.19" from Wei Xu:

- Add reboot node, reusing syscon-reboot
- Add I2C nodes Hisilicon IP
- Add IR node based on Hisilicon IP
- Add Watchdog node based on ARM IP
- Add GPIO nodes based on ARM GPIO IP
- Add SATA node based on Hisilicon IP
- Add USB nodes
- Add MMC nodes based on Synopsys IP
- Add GMAC nodes based on Hisilicon IP

* tag 'hix5hd2-dt-for-3.19' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hix5hd2: add reboot node
  ARM: dts: hix5hd2: add i2c node
  ARM: dts: hix5hd2: add ir node
  ARM: dts: hix5hd2: add wdg node
  ARM: dts: hix5hd2: add gpio node
  ARM: dts: hix5hd2: add sata node
  ARM: dts: hix5hd2: add usb node
  ARM: dts: hix5hd2: add mmc node
  ARM: dts: hix5hd2: add gmac node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Third Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:

* Use keyboard as gpio-keys node name

* tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node name
  ARM: shmobile: koelsch: Use keyboard as gpio-keys node name
  ARM: shmobile: lager: Use keyboard as gpio-keys node name
  ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node name
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:

* Drop console= bootargs parameter on alt
* Correct scifb* naming on r8a73a4
* Drop 0x unit-address prefixes
* Remove unnecessary MMC options

* tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: alt dts: Drop console= bootargs parameter
  ARM: shmobile: r8a73a4: fix scifb* naming
  ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix
  ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix
  ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix
  ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options
  ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options
  ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:

* Add Add SoC-specific SATA compatible property to r8a7779
* Enable DMA for MMCIF on r8a7791 and r8a7790
* Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790
* Enable TMU timer via DT on r8a7778
* Enable CMT timer via DT on r8a73a4
* Add MMP and {SR}GX clocks to  r8a7791 and r8a7790
* Correct scifa2 clock index on r8a7740
* Add missing INTCA for irqpin on r8a7740

* tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
  ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node
  ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes
  ARM: shmobile: r8a7791: Add MMCIF0 DT node
  ARM: shmobile: r8a7790: Rename mmcif node to mmc
  ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property
  ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property
  ARM: shmobile: henninger: enable HS-USB
  ARM: shmobile: koelsch: enable HS-USB
  ARM: shmobile: r8a7791: add HS-USB device node
  ARM: shmobile: lager: enable HS-USB
  ARM: shmobile: r8a7790: add HS-USB device node
  ARM: shmobile: r8a7791: add USB3.0 device node
  ARM: shmobile: lager: enable USB3.0
  ARM: shmobile: r8a7790: add USB3.0 device node
  ARM: shmobile: r8a7794: Add arch_timer to device tree
  ARM: shmobile: bockw-reference: Initialise TMU device using DT
  ARM: shmobile: r8a7778: Add TMU nodes
  ARM: shmobile: armadillo800eva dts: Enable TMU0
  ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a base for the DT updates, merged through the arm-soc
cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'nomadik-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Merge "Nomadik updates for the v3.19 series" from Linus Walleij:

Nomadik changes for the v3.19 development series:
- Rearrange the DTS files to make a pure SoC-specific file and
  a pure board file for S8815.
- Add the device tree for the NDK15 board.
- Update the defconfig and configure in the STMPE expander by
  default on the Nomadik.

* tag 'nomadik-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: configure in STMPE support
  ARM: update Nomadik config
  ARM: nomadik: device tree for NHK15 board
  ARM: nomadik: push ethernet down to board
  ARM: nomadik: set up MCDATDIR2
  ARM: nomadik: move GPIO I2C to S8815 board file
  ARM: nomadik: disable chrystals in top level board files
  ARM: nomadik: move MMC/SD card detect GPIO to board DTS
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "at91: dt for 3.19 #1" from Nicolas Ferre:

"Very little DT update for AT91. More will come but I want to send this first
batch soon so it doesn't get in the way of larger modifications."

First DT batch for 3.19:
- CAN device nodes for at91sam9263 and at91sam9x5
- at91sam9x5 DMA definitions for usart

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: at91sam9263: Add CAN device nodes
  ARM: at91/dt: at91sam9x5: Add CAN device nodes
  ARM: at91/dt/trivial: at91sam9x5_can.dtsi: comment and whitespace fixes
  ARM: at91: at91sam9x5 dt: add usart dma definitions to dt
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: berlin: DT changes for v3.19 (round 1)" from Sebastian Hesselbarth:

"This is Berlin DT changes for v3.19 and contains those patches that missed
the v3.18 merge window plus corresponding patches to catch-up with Antoine's
BG2Q improvements for BG2 and BG2CD. We now have working SDHCI and Ethernet
on all SoCs (well, BG2CD has HDMI HEC only), SATA PHY support for BG2 is still
pending."

Berlin DT changes for v3.19 (round 1)
- AHCI and SATA PHY nodes for BG2Q
- Reset controller binding docs
- Ethernet nodes for BG2, BG2CD
- SDHCI nodes for BG2, BG2CD
- Corresponding board changes to enable AHCI, Ethernet, SDHCI

* tag 'berlin-dt-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7
  ARM: dts: berlin: Enable WiFi on Google Chromecast
  ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD
  ARM: dts: berlin: Enable ethernet on Sony NSZ-GS7
  ARM: dts: berlin: Add phy-connection-type to BG2Q Ethernet
  ARM: dts: berlin: Add BG2CD ethernet DT nodes
  ARM: dts: berlin: Add BG2 ethernet DT nodes
  ARM: dts: berlin: Add GPIO leds to Google Chromecast
  ARM: dts: berlin: enable timer 1 for sched_clock
  ARM: dts: berlin: add a required reset property in the chip controller node
  Documentation: bindings: add reset bindings docs for Marvell Berlin SoCs
  ARM: dts: berlin: enable the eSATA interface on the BG2Q DMP
  ARM: dts: berlin: add the AHCI node for the BG2Q
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "STi DT updates for v3.19, round 1" from Maxime Coquelin:

Highlights:
-----------
 - Add SDHCI support for STiH41x B2020 boards
 - Add reset controllers to STiH407 SoC
 - Add MiPHY & SATA support to STiH416
 - Add Thermal supportto STiH416
 - Add Clock support to STiH407 SoC

This tag also includes STiH407 bindings definitions for reset controller.

* tag 'sti-dt-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: DT: STiH407: Fix: clk-tmds-hdmi clock is missing
  ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocks
  ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0
  ARM: DT: STi: STiH416: Add DT node for ST's SATA device
  ARM: DT: STi: STiH416: Add DT node for MiPHY365x
  ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes
  ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards.
  ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs
  ARM: STi: DT: Add sdhci controller for stih415
  ARM: STi: DT: Add sdhci pin configuration for stih415
  ARM: STi: DT: Add sdhci controller for stih416
  ARM: STi: DT: Add sdhci pins for stih416
  ARM: sti: Add STiH407 reset controller support.
  ARM: sti: Add STiH407 Kconfig entry to select STIH407_RESET
  ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase
  reset: stih407: Add reset controllers DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "Broadcom Cygnus SoC Device Tree changes" from Florian Fianelli:

This patchset contains initial support for Broadcom's Cygnus SoC based on our
iProc architecture. Initial support is minimal and includes just the mach
platform code, clock driver, and a basic device tree configuration. Peripheral
drivers will be submitted soon, as will device tree configurations for other
Cygnus board variants.

These are the Device Tree changes

* tag 'arm-soc/for-3.18/cygnus-dts-v9' of http://github.com/brcm/linux:
  ARM: dts: Enable Broadcom Cygnus SoC
  dt-bindings: Document Broadcom Cygnus SoC and clocks
Signed-off-by: Olof Johansson <olof@lixom.net>

Reuse syscon-reboot, drivers/power/reset/syscon-reboot.c
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This enables the STMPE MFD, GPIO and keypad support by default on
the Nomadik builds. This expander is used on the NDK 15 board.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This updates the Nomadik (NHK8815) defconfig to what saveconfig
produces after some recent changes to Kconfig fragments here
and there.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Alt is booted from DT, so chosen/stdout-path is
always used, and we can drop the "console=" parameter from chosen/bootargs.

This change has a side-effect of changing the console speed from 38400
to 115200. This is intentional as 115200 is consistently used on
all other shmobile boards.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ports are named scifb0-3, not scifb2-5.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'renesas-dt-clocksource-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Clocksource Updates for v3.19" from Simon
Horman:

* sh_mtu2: Drop incorrect SoC family name
* sh_tmu: Document r8a7778 and r8a7740 bindings

* tag 'renesas-dt-clocksource-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  clocksource: sh_mtu2: Drop incorrect SoC family name
  clocksource: sh_tmu: Document r8a7778 binding
  clocksource: sh_tmu: Document R-Mobile r8a7740 binding
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v3.19-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "first bunch on Rockchip dt changes" from Heiko Stübner:

First hunk of rockchip devicetree patches, containing:
- cpu operating points and supplies
- dma support for spi controllers
- i2s on rk3066 and rk3188
- default core clock settings for rk3288

* tag 'v3.19-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add SPI DMA into rk3288.dtsi
  ARM: dts: rockchip: enable init rate for clock
  ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188
  ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188
  ARM: dts: rockchip: add cpu supplies to boards
  ARM: dts: rockchip: add operating points and armclk references
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-r8a73a4-dt-timers-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC r8a73a4 DT Timers Updates for v3.19" from Simon
Horman:

* Initialise CMT1 timer using DT

* tag 'renesas-r8a73a4-dt-timers-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a73a4: Remove empty r8a73a4_add_dt_devices
  ARM: shmobile: ape6evm-reference: Initialise CMT1 device using DT
  ARM: shmobile: r8a73a4: Rename cmt registration helper
  ARM: shmobile: r8a73a4: Add CMT1 node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-cleanups-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:

* Add chosen/stdout-path to DTS files for shmobile boards
* Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY
  - The corresponding board file has already been removed
* Sort dts nodes by address
* Sort SHMOBILE dtbs alphabetically in Makefile

* tag 'renesas-dt-cleanups-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9d dts: Add chosen/stdout-path
  ARM: shmobile: kzm9g-reference dts: Add chosen/stdout-path
  ARM: shmobile: alt dts: Add chosen/stdout-path
  ARM: shmobile: koelsch dts: Add chosen/stdout-path
  ARM: shmobile: henninger dts: Add chosen/stdout-path
  ARM: shmobile: lager dts: Add chosen/stdout-path
  ARM: shmobile: marzen dts: Add chosen/stdout-path
  ARM: shmobile: bockw-reference dts: Add chosen/stdout-path
  ARM: shmobile: armadillo800eva dts: Add chosen/stdout-path
  ARM: shmobile: ape6evm-reference dts: Add chosen/stdout-path
  ARM: shmobile: genmai dts: Add chosen/stdout-path
  ARM: shmobile: emev2 dtsi: Add uart* labels for easier referencing
  ARM: shmobile: emev2 dtsi: Use generic names for device nodes
  ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY
  ARM: shmobile: r8a73a4: sort dtsi file by address
  ARM: shmobile: kzm9d: sort dts file by address
  ARM: shmobile: r7s72100: sort dtsi file by address
  ARM: shmobile: r8a73a4: Remove spurious dma-multiplexer base addresses
  ARM: dts: Sort SHMOBILE dtbs alphabetically
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Merge "RealView DeviceTree support for v3.19" from Linus Walleij:

- Device Tree implementation for the ARM RealView boards
- DTS file for the ARM RealView PB1176
- Updates on top of the same DTS file

* tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: add MMCI to the PB1176 DTS
  ARM: realview: add KMIs to the PB1176 DTS
  ARM: realview: add FPGA UART4 to PB1176 DTS
  ARM: realview: add PL022 SSP/SPI block to PB1176 DTS
  ARM: realview: add RTC clocks to device tree
  ARM: realview: add charlcd to PB1176 device tree
  ARM: realview: add PL061 GPIO to the PB1176 DTS
  ARM: realview: move DT GIC to FPGA node
  ARM: realview: add device tree and bindings for PB1176
  ARM: realview: basic device tree implementation
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "1st Round of Samsung DT updates for v3.19" from Kukjin Kim:

Samsung DT updates for v3.19

- add CPU nodes for exynos4210, exynos4212, exynos4412

- exynos4x12-pinctrl: add utility macro to define pin sleep states
- exynos4412-trats2: add Maxim77693 PMIC node, add sleep mode pin
  configuration and keep eMMC regulators soft-disabled

- add new exynos5250-spring DT

- cleanup exynos5250-arndale, exynos5250-smdk5250 and exynos5250-snow

- exynos5250-arndale: fix apparent GPIO typo and simplify USB3503
- exynos5250-snow and exynos Peach boards: add rtc_src clock for RTC

- correct mmc0 capability string exynos5420-peach-pit and exynos5800-
  peach-pi

- exynos3250: add MFC codec nodes

- s3c64xx: enable PWM node by default

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add CPU nodes for Exynos4 SoCs
  ARM: dts: add MFC codec device node for exynos3250
  ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2
  ARM: dts: Add sleep mode pin configuration for exynos4412-trats2
  ARM: dts: Add utility macro to define pin sleep states for exynos4x12-pinctrl
  ARM: dts: Keep eMMC regulators soft-disabled for exynos4412-trats2
  ARM: dts: correct the mmc0 capability string for exynos Peach boards
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards
  ARM: dts: Enable PWM node by default for s3c64xx
  ARM: dts: Add exynos5250-spring device tree
  ARM: dts: Simplify USB3503 on exynos5250-arndale
  ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
  ARM: dts: Clean up exynos5250-arndale
  ARM: dts: Clean up exynos5250-smdk5250
  ARM: dts: Fill in bootargs for exynos5250-snow
  ARM: dts: Clean up exynos5250-snow
  ARM: dts: Prepare node labels for exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the missing CAN devices node including their pin muxing. The required
clock node already exists.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add the missing CAN devices node including their pin muxing to the shared
.dtsi for at91sam9x5. Actually include this file.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch adds usart dma definitions to both dtsi for sam9x5 chips. Without
usage of dma it's unable to catch all bytes on usart receiver.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Pull MTD fixes from Brian Norris:
 "Three main MTD fixes for 3.18:

   - A regression from 3.16 which was noticed in 3.17.  With the
     restructuring of the m25p80.c driver and the SPI NOR library
     framework, we omitted proper listing of the SPI device IDs.  This
     means m25p80.c wouldn't auto-load (modprobe) properly when built as
     a module.  For now, we duplicate the device IDs into both modules.

   - The OMAP / ELM modules were depending on an implicit link ordering.
     Use deferred probing so that the new link order (in 3.18-rc) can
     still allow for successful probing.

   - Fix suspend/resume support for LH28F640BF NOR flash"

* tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips
  mtd: omap: fix mtd devices not showing up
  mtd: m25p80,spi-nor: Fix module aliases for m25p80
  mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
  mtd: m25p80: get rid of spi_get_device_id