- 02 Oct, 2018 40 commits
-
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 15ecbe94 ] Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea ("tcp: do not aggressively quick ack after ECN events") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Neal Cardwell <ncardwell@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Yousuk Seung authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit f4c9f85f ] Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock* instead of tcp_sock* to clean up type casts. This is a pure refactor patch. Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 522040ea ] ECN signals currently forces TCP to enter quickack mode for up to 16 (TCP_MAX_QUICKACKS) following incoming packets. We believe this is not needed, and only sending one immediate ack for the current packet should be enough. This should reduce the extra load noticed in DCTCP environments, after congestion events. This is part 2 of our effort to reduce pure ACK packets. Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9a9c9b51 ] We want to add finer control of the number of ACK packets sent after ECN events. This patch is not changing current behavior, it only enables following change. Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit a3893637 ] As explained in commit 9f9843a7 ("tcp: properly handle stretch acks in slow start"), TCP stacks have to consider how many packets are acknowledged in one single ACK, because of GRO, but also because of ACK compression or losses. We plan to add SACK compression in the following patch, we must therefore not call tcp_enter_quickack_mode() Signed-off-by:
-
Eugeniy Paltsev authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9939a46d ] As for today STMMAC_ALIGN macro (which is used to align DMA stuff) relies on L1 line length (L1_CACHE_BYTES). This isn't correct in case of system with several cache levels which might have L1 cache line length smaller than L2 line. This can lead to sharing one cache line between DMA buffer and other data, so we can lose this data while invalidate DMA buffer before DMA transaction. Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for aligning. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Xiao Liang authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 822fb18a ] When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by:
Xiao Liang <xiliang@redhat.com> Signed-off-by:
-
Stefan Wahren authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 136f55f6 ] As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by:
Floris Bos <bos@je-eigen-domein.nl> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
tangpengpeng authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 7f3fc7dd ] If we enable or disable xgbe flow-control by ethtool , it does't work.Because the parameter is not properly assigned,so we need to adjust the assignment order of the parameters. Fixes: c1ce2f77 ("amd-xgbe: Fix flow control setting logic") Signed-off-by:
tangpengpeng <tangpengpeng@higon.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9fc12023 ] Remove BUG_ON() from fib_compute_spec_dst routine and check in_dev pointer during flowi4 data structure initialization. fib_compute_spec_dst routine can be run concurrently with device removal where ip_ptr net_device pointer is set to NULL. This can happen if userspace enables pkt info on UDP rx socket and the device is removed while traffic is flowing Fixes: 35ebf65e ("ipv4: Create and use fib_compute_spec_dst() helper") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Andrea Adami authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit e5b7d71a upstream. These platform drivers are lacking MODULE_ALIAS so module autoloading doesn't work. Tested on corgi and poodle with kernel 4.4. Signed-off-by:
Andrea Adami <andrea.adami@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Eric Engestrom authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 4e0def88 upstream. Signed-off-by:
Eric Engestrom <eric.engestrom@imgtec.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 8d5a803c upstream. With commit 044e6e3d: "ext4: don't update checksum of new initialized bitmaps" the buffer valid bit will get set without actually setting up the checksum for the allocation bitmap, since the checksum will get calculated once we actually allocate an inode or block. If we are doing this, then we need to (re-)check the verified bit after we take the block group lock. Otherwise, we could race with another process reading and verifying the bitmap, which would then complain about the checksum being invalid. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 362eca70 upstream. The inline data code was updating the raw inode directly; this is problematic since if metadata checksums are enabled, ext4_mark_inode_dirty() must be called to update the inode's checksum. In addition, the jbd2 layer requires that get_write_access() be called before the metadata buffer is modified. Fix both of these problems. https://bugzilla.kernel.org/show_bug.cgi?id=200443Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 01cfb793 upstream. Anatoly Trosinenko reports that a corrupted squashfs image can cause a kernel oops. It turns out that squashfs can end up being confused about negative fragment lengths. The regular squashfs_read_data() does check for negative lengths, but squashfs_read_metadata() did not, and the fragment size code just blindly trusted the on-disk value. Fix both the fragment parsing and the metadata reading code. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1791953 commit 81e69df3 upstream. Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by:
-
José Roberto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 4f212e40 ] To comply with eDP1.4a this bit should be set when enabling PSR2. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 90db5c82 ] The annotations there are wrong as warned: drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types) drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: expected unsigned short [unsigned] [short] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: got restricted __be16 [usertype] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Shivasharan S authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 3239b8cd ] Hardware could time out Fastpath IOs one second earlier than the timeout provided by the host. For non-RAID devices, driver provides timeout value based on OS provided timeout value. Under certain scenarios, if the OS provides a timeout value of 1 second, due to above behavior hardware will timeout immediately. Increase timeout value for non-RAID fastpath IOs by 1 second. Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xose Vazquez Perez authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 37b37d26 ] SGI/TP9100 is not an RDAC array: ^^^ https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235 This partially reverts commit 35204772 ("[SCSI] scsi_dh_rdac : Consolidate rdac strings together") [mkp: fixed up the new entries to align with rest of struct] Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
-
Suman Anna authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit b7e1e685 ] The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware ARM DMA backend. The current code creates a dma_iommu_mapping and attaches this to the ISP device, but never detaches the mapping in either the probe failure paths or the driver remove path resulting in an unbalanced mapping refcount and a memory leak. Fix this properly. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Suman Anna <s-anna@ti.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit ad2fdcdf ] In crypto_authenc_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tudor-Dan Ambarus authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 31545df3 ] In crypto_authenc_esn_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
-
Dominik Bozek authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 5d111f51 ] wait_for_connected() wait till a port change status to USB_PORT_STAT_CONNECTION, but this is not possible if the port is unpowered. The loop will only exit at timeout. Such case take place if an over-current incident happen while system is in S3. Then during resume wait_for_connected() will wait 2s, which may be noticeable by the user. Signed-off-by:
Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
-
Michal Simek authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit ece97f3a ] simpleImage generation was broken for some time. This patch is fixing steps how simpleImage.*.ub file is generated. Steps are objdump of vmlinux and create .ub. Also make sure that there is striped elf version with .strip suffix. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Ondrej Mosnáček authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 23bcc480 ] Current implementation of auditing by executable name only implements the 'equal' operator. This patch extends it to also support the 'not equal' operator. See: https://github.com/linux-audit/audit-kernel/issues/53Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Siva Rebbagondla authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 78e45071 ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Chris Novakovic authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 300eec7c ] ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by:
Chris Novakovic <chris@chrisn.me.uk> Signed-off-by:
-
Luc Van Oostenryck authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 2ea00909 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.comSigned-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 1c74d5c0 ] Currently we are enabling handling of interrupts specific to Tegra124+ which happen to overlap with previous generations. Let's specify interrupts mask per SoC generation for consistency and in a preparation of squashing of Tegra20 driver into the common one that will enable handling of GART faults which may be undesirable by newer generations. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit bf3fbdfb ] The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the mask to the interrupt status and don't handle interrupts that MC driver haven't asked for. Kernel would disable spurious MC IRQ and report the error. This would happen only in a case of a very severe bug. Signed-off-by:
-
Takashi Sakamoto authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 8e142e9e ] DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but tlv.h is not included. This causes build failure when local macro is defined by comment-out. This commit fixes the bug. At the same time, the alias macro is replaced with a destination macro added at a commit 46e860f7 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Reported-by:
Connor McAdams <conmanx360@gmail.com> Fixes: 44f0c978 ('ALSA: hda/ca0132: Add tuning controls') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Satendra Singh Thakur authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit fc2a69f3 ] In the func drm_atomic_set_crtc_for_plane, with the current code, if crtc of the plane_state and crtc passed as argument to the func are same, entire func will executed in vein. It will get state of crtc and clear and set the bits in plane_mask. All these steps are not required for same old crtc. Ideally, we should do nothing in this case, this patch handles the same, and causes the program to return without doing anything in such scenario. Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit e1b7f11b ] Those are all false-positives that appear with smatch when building for arm: drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 Get rid of them by adding explicit forced casts. Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit ab7f5bf0 ] Comments in the verifier refer to free_bpf_prog_info() which seems to have never existed in tree. Replace it with free_used_maps(). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 8bfc218d ] Add missing clearing of the previous value when setting rising temperature threshold. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 27e833da ] If we had more than 32 megaraid cards then it would cause memory corruption. That's not likely, of course, but it's handy to enforce it and make the static checker happy. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 9899e4d3 ] In tw_chrdev_ioctl(), the length of the data buffer is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'data_buffer_length'. Then a security check is performed on it to make sure that the length is not more than 'TW_MAX_IOCTL_SECTORS * 512'. Otherwise, an error code -EINVAL is returned. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer length between the two copies. This way, the user can bypass the security check and inject invalid data buffer length. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to avoid the above issues. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit c9318a3e ] In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'driver_command'. Then a security check is performed on the data buffer size indicated by 'driver_command', which is 'driver_command.buffer_length'. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer size between the two copies. This way, the user can bypass the security check and inject invalid data buffer size. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o avoid the above issues. Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1791953 [ Upstream commit 3c0a83b1 ] The s390 CPU measurement facility sampling mode supports basic entries and diagnostic entries. Each entry has a valid bit to indicate the status of the entry as valid or invalid. This bit is bit 31 in the diagnostic entry, but the bit mask definition refers to bit 30. Fix this by making the reserved field one bit larger. Fixes: 7e75fc3f ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
