- 08 Jun, 2018 40 commits
-
-
Jake Daryll Obina authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 5bdd0c6f ] If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode() can get called twice in the error handling path, the first call in jffs2_iget() itself and the second through iget_failed(). This can result to a use-after-free error in the second jffs2_do_clear_inode() call, such as shown by the oops below wherein the second jffs2_do_clear_inode() call was trying to free node fragments that were already freed in the first jffs2_do_clear_inode() call. [ 78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c [ 78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b [ 78.185871] pgd = ffffffc03a567000 [ 78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 [ 78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP ... [ 78.513147] PC is at rb_first_postorder+0xc/0x28 [ 78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2] [ 78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105 [ 78.526757] sp : ffffff800cea38f0 [ 78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80 [ 78.532754] x27: 0000000000000000 x26: ffffff800cea3c70 [ 78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d [ 78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8 [ 78.544760] x21: 0000000000000000 x20: 0000000000000000 [ 78.548762] x19: ffffffc037d48910 x18: ffffff800891a588 [ 78.552764] x17: 0000000000000800 x16: 0000000000000c00 [ 78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f [ 78.560767] x13: 6461657220726f66 x12: 2064656c69616620 [ 78.564769] x11: 435243203a6c616e x10: 7265746e695f6564 [ 78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038 [ 78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 [ 78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000 [ 78.580777] x3 : 0000000000000000 x2 : 000000403755e000 [ 78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b ... [ 79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28 [ 79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2] [ 79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2] [ 79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168 [ 79.056835] [<ffffff8008202650>] iput+0x1c0/0x200 [ 79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c [ 79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2] [ 79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2] [ 79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190 [ 79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c [ 79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108 [ 79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100 [ 79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c [ 79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114 [ 79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98 [ 79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4 [ 79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821) The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since iget_failed() will eventually call jffs2_do_clear_inode() if needed, so just remove it. Fixes: 5451f79f ("iget: stop JFFS2 from using iget() and read_inode()") Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Jake Daryll Obina <jake.obina@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 7ad81482 ] We get the "new_profile_index" value from the mouse device when we're handling raw events. Smatch taints it as untrusted data and complains that we need a bounds check. This seems like a reasonable warning otherwise there is a small read beyond the end of the array. Fixes: 0e70f97f ("HID: roccat: Add support for Kova[+] mouse") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Silvan Jegen <s.jegen@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 96d5eaa9 ] While testing with the ARM specific memset() macro removed, I ran into a compiler warning that shows an old bug: drivers/scsi/arm/fas216.c: In function 'fas216_rq_sns_done': drivers/scsi/arm/fas216.c:2014:40: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess] It turns out that the definition of the scsi_cmd structure changed back in linux-2.6.25, so now we clear only four bytes (sizeof(pointer)) instead of 96 (SCSI_SENSE_BUFFERSIZE). I did not check whether we actually need to initialize the buffer here, but it's clear that if we do it, we should use the correct size. Fixes: de25deb1 ("[SCSI] use dynamically allocated sense buffer") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 762221f0 ] The raid6 corruption is that, suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content. We've fixed normal reads to rebuild raid6 correctly with more retries in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix scrub to do the exactly same rebuild process. [1]: https://patchwork.kernel.org/patch/10091755/Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nikolay Borisov authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 9ea2c7c9 ] When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then the level variable is going to be 7 (this is the max height of the tree). On the other hand btrfs_cow_block is always called with "level + 1" as an index into the nodes and slots arrays. This leads to an out of bounds access. Admittdely this will be benign since an OOB access of the nodes array will likely read the 0th element from the slots array, which in this case is going to be 0 (since we start CoW at the top of the tree). The OOB access into the slots array in turn will read the 0th and 1st values of the locks array, which would both be 0 at the time. However, this benign behavior relies on the fact that the path being passed hasn't been initialised, if it has already been used to query a btree then it could potentially have populated the nodes/slots arrays. Fix it by explicitly checking if we are at level 7 (the maximum allowed index in nodes/slots arrays) and explicitly call the CoW routine with NULL for parent's node/slot. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Fixes-coverity-id: 711515 Reviewed-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 343e4fc1 ] Setting plug can merge adjacent IOs before dispatching IOs to the disk driver. Without plug, it'd not be a problem for single disk usecases, but for multiple disks using raid profile, a large IO can be split to several IOs of stripe length, and plug can be helpful to bring them together for each disk so that we can save several disk access. Moreover, fsync issues synchronous writes, so plug can really take effect. Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e749d328 ] Fix to return a negative error code from the request_irq() error handling case instead of 0, as done elsewhere in this function. Fixes: dce143c3 ("ipmi/powernv: Convert to irq event interface") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Ulf Magnusson authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 5b1374b3 ] Only the E_NOT operand and not the E_NOT node itself was freed, due to accidentally returning too early in expr_free(). Outline of leak: switch (e->type) { ... case E_NOT: expr_free(e->left.expr); return; ... } *Never reached, 'e' leaked* free(e); Fix by changing the 'return' to a 'break'. Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix: LEAK SUMMARY: definitely lost: 44,448 bytes in 1,852 blocks ... Summary after the fix: LEAK SUMMARY: definitely lost: 1,608 bytes in 67 blocks ... Signed-off-by:
Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Ulf Magnusson authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit ae7440ef ] expr_trans_compare() always allocates and returns a new expression, giving the following leak outline: ... *Allocate* basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no); ... for (menu = parent->next; menu; menu = menu->next) { ... *Copy* dep2 = expr_copy(basedep); ... *Free copy* expr_free(dep2); } *basedep lost!* Fix by freeing 'basedep' after the loop. Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix: LEAK SUMMARY: definitely lost: 344,376 bytes in 14,349 blocks ... Summary after the fix: LEAK SUMMARY: definitely lost: 44,448 bytes in 1,852 blocks ... Signed-off-by:
-
Ulf Magnusson authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 0724a7c3 ] If a 'mainmenu' entry appeared in the Kconfig files, two things would leak: - The 'struct property' allocated for the default "Linux Kernel Configuration" prompt. - The string for the T_WORD/T_WORD_QUOTE prompt after the T_MAINMENU token, allocated on the heap in zconf.l. To fix it, introduce a new 'no_mainmenu_stmt' nonterminal that matches if there's no 'mainmenu' and adds the default prompt. That means the prompt only gets allocated once regardless of whether there's a 'mainmenu' statement or not, and managing it becomes simple. Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix: LEAK SUMMARY: definitely lost: 344,568 bytes in 14,352 blocks ... Summary after the fix: LEAK SUMMARY: definitely lost: 344,440 bytes in 14,350 blocks ... Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit f541c09e ] According to all published information, the watchdog disable bit for SB800 compatible controllers is bit 1 of PM register 0x48, not bit 2. For the most part that doesn't matter in practice, since the bit has to be cleared to enable watchdog address decoding, which is the default setting, but it still needs to be fixed. Cc: Zoltán Böszörményi <zboszor@pr.hu> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Jan Chochol authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit cbebc6ef ] Since commit 57e62324 ("NFS: Store the legacy idmapper result in the keyring") nfs_idmap_cache_timeout changed units from jiffies to seconds. Unfortunately sysctl interface was not updated accordingly. As a effect updating /proc/sys/fs/nfs/idmap_cache_timeout with some value will incorrectly multiply this value by HZ. Also reading /proc/sys/fs/nfs/idmap_cache_timeout will show real value divided by HZ. Fixes: 57e62324 ("NFS: Store the legacy idmapper result in the keyring") Signed-off-by:
Jan Chochol <jan@chochol.info> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
mulhern authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 9b28a110 ] Fixes: 1. The use of "exceeds" when the opposite of exceeds, falls below, was meant. 2. Properly speaking, a table can not exceed a threshold. It emphasizes the important point, which is that it is the userspace daemon's responsibility to check for low free space when a device is resumed, since it won't get a special event indicating low free space in that situation. Signed-off-by:
mulhern <amulhern@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit d777f8de ] If a field is a dynamic string, get_field_str() returned just the offset/size value and not the string. Have it parse the offset/size correctly to return the actual string. Otherwise filtering fails when trying to filter fields that are dynamic strings. Reported-by:
Gopanapalli Pradeep <prap_hai@yahoo.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 249d98e5 ] When setting the "dwarf" unwinder for a specific event and not specifying the max-stack, the attr.sample_max_stack ended up using an uninitialized callchain_param.max_stack, fix it by using designated initializers for that callchain_param variable, zeroing all non explicitely initialized struct members. Here is what happened: # perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 callchain: type DWARF callchain: stack dump size 8192 perf_event_attr: type 2 size 112 config 0x730 { sample_period, sample_freq } 1 sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC exclude_callchain_user 1 { wakeup_events, wakeup_watermark } 1 sample_regs_user 0xff0fff sample_stack_user 8192 sample_max_stack 50656 sys_perf_event_open failed, error -75 Value too large for defined data type # perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 callchain: type DWARF callchain: stack dump size 8192 perf_event_attr: type 2 size 112 config 0x730 sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC exclude_callchain_user 1 sample_regs_user 0xff0fff sample_stack_user 8192 sample_max_stack 30448 sys_perf_event_open failed, error -75 Value too large for defined data type # Now the attr.sample_max_stack is set to zero and the above works as expected: # perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.072 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.072/0.072/0.072/0.000 ms 0.000 probe_libc:inet_pton:(7feb7a998350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa39b6108f3f] (/usr/bin/ping) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-is9tramondqa9jlxxsgcm9iz@git.kernel.orgSigned-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 38d70b7c ] When processing %pX in pretty_print(), simplify the logic slightly by incrementing the ptr to the format string if isalnum(ptr[1]) is true. This follows the logic a bit more closely to what is in the kernel. Also, this fixes a small bug where %pF was not giving the offset of the function. Signed-off-by:
-
Alex Williamson authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit aa008206 ] The Marvell 9128 is the original device generating bug 42679, from which many other Marvell DMA alias quirks have been sourced, but we didn't have positive confirmation of the fix on 9128 until now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679 Link: https://www.spinics.net/lists/kvm/msg161459.htmlReported-by:
Binarus <lists@binarus.de> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Anna-Maria Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 91633eed ] So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for detecting the ABS or REL timer modes is not valid anymore, it got broken by the introduction of HRTIMER_MODE_PINNED. HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the sake of completeness print all given modes. Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 51776043 ] This ioctl is obsolete (it was used by Xenner as far as I know) but still let's not break it gratuitously... Its handler is copying directly into struct kvm. Go through a bounce buffer instead, with the added benefit that we can actually do something useful with the flags argument---the previous code was exiting with -EINVAL but still doing the copy. This technically is a userspace ABI breakage, but since no one should be using the ioctl, it's a good occasion to see if someone actually complains. Cc: kernel-hardening@lists.openwall.com Cc: Kees Cook <keescook@chromium.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 123af904 ] The loop timeout doesn't work because it's a post op and ends with "tmo" set to -1. I changed it from a post-op to a pre-op and I changed the initial the starting value from 5 to 6 so we still iterate 5 times. I left the other as it was because it's a large number. Fixes: b3c70c9e ("ASoC: Alchemy AC97C/I2SC audio support") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit c469652b ] The commit ffcd28d8 ("ALSA: hda - Select INPUT for Realtek HD-audio codec") introduced the reverse-selection of CONFIG_INPUT for Realtek codec in order to avoid the mess with dependency between built-in and modules. Later on, we obtained IS_REACHABLE() macro exactly for this kind of problems, and now we can remove th INPUT selection in Kconfig and put IS_REACHABLE(INPUT) to the appropriate places in the code, so that the driver doesn't need to select other subsystem forcibly. Fixes: ffcd28d8 ("ALSA: hda - Select INPUT for Realtek HD-audio codec") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit dce2630c ] There are 2 comments in the NFSv4 code which suggest that SIGLOST should possibly be sent to a process. In these cases a lock has been lost. The current practice is to set NFS_LOCK_LOST so that read/write returns EIO when a lock is lost. So change these comments to code when sets NFS_LOCK_LOST. One case is when lock recovery after apparent server restart fails with NFS4ERR_DENIED, NFS4ERR_RECLAIM_BAD, or NFS4ERRO_RECLAIM_CONFLICT. The other case is when a lock attempt as part of lease recovery fails with NFS4ERR_DENIED. In an ideal world, these should not happen. However I have a packet trace showing an NFSv4.1 session getting NFS4ERR_BADSESSION after an extended network parition. The NFSv4.1 client treats this like server reboot until/unless it get NFS4ERR_NO_GRACE, in which case it switches over to "nograce" recovery mode. In this network trace, the client attempts to recover a lock and the server (incorrectly) reports NFS4ERR_DENIED rather than NFS4ERR_NO_GRACE. This leads to the ineffective comment and the client then continues to write using the OPEN stateid. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 18877518 ] At least some JMicron controllers issue buggy oversized DMA reads when fetching context descriptors, always fetching 0x20 bytes at once for descriptors which are only 0x10 bytes long. This is often harmless, but can cause page faults on modern systems with IOMMUs: DMAR: [DMA Read] Request device [05:00.0] fault addr fff56000 [fault reason 06] PTE Read access is not set firewire_ohci 0000:05:00.0: DMA context IT0 has stopped, error code: evt_descriptor_read This works around the problem by always leaving 0x10 padding bytes at the end of descriptor buffer pages, which should be harmless to do unconditionally for controllers in case others have the same behavior. Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 1e2e547a upstream. For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by:
Mike Marshall <hubcap@omnibond.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Brian Foster authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 5a93790d upstream. xfs_attr_[get|remove]() have unlocked attribute fork checks to optimize away a lock cycle in cases where the fork does not exist or is otherwise empty. This check is not safe, however, because an attribute fork short form to extent format conversion includes a transient state that causes the xfs_inode_hasattr() check to fail. Specifically, xfs_attr_shortform_to_leaf() creates an empty extent format attribute fork and then adds the existing shortform attributes to it. This means that lookup of an existing xattr can spuriously return -ENOATTR when racing against a setxattr that causes the associated format conversion. This was originally reproduced by an untar on a particularly configured glusterfs volume, but can also be reproduced on demand with properly crafted xattr requests. The format conversion occurs under the exclusive ilock. xfs_attr_get() and xfs_attr_remove() already have the proper locking and checks further down in the functions to handle this situation correctly. Drop the unlocked checks to avoid the spurious failure and rely on the existing logic. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
zhongjiang authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 4ea77014 upstream. When running kill(72057458746458112, 0) in userspace I hit the following issue. UBSAN: Undefined behaviour in kernel/signal.c:1462:11 negation of -2147483648 cannot be represented in type 'int': CPU: 226 PID: 9849 Comm: test Tainted: G B ---- ------- 3.10.0-327.53.58.70.x86_64_ubsan+ #116 Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SYSC_kill+0x43e/0x4d0 SyS_kill+0xe/0x10 system_call_fastpath+0x16/0x1b Add code to avoid the UBSAN detection. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 23d6aef7 upstream. `resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
David Hildenbrand authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 3f195972 upstream. Using module_init() is wrong. E.g. ACPI adds and onlines memory before our memory notifier gets registered. This makes sure that ACPI memory detected during boot up will not result in a kernel crash. Easily reproducible with QEMU, just specify a DIMM when starting up. Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com Fixes: 786a8959 ("kasan: disable memory hotplug") Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 8f89c007 upstream. shmat()'s SHM_REMAP option forbids passing a nil address for; this is in fact the very first thing we check for. Andrea reported that for SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check, but we need to check again if the address was rounded down to nil. As of this patch, such cases will return -EINVAL. Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit a73ab244 upstream. Patch series "ipc/shm: shmat() fixes around nil-page". These patches fix two issues reported[1] a while back by Joe and Andrea around how shmat(2) behaves with nil-page. The first reverts a commit that it was incorrectly thought that mapping nil-page (address=0) was a no no with MAP_FIXED. This is not the case, with the exception of SHM_REMAP; which is address in the second patch. I chose two patches because it is easier to backport and it explicitly reverts bogus behaviour. Both patches ought to be in -stable and ltp testcases need updated (the added testcase around the cve can be modified to just test for SHM_RND|SHM_REMAP). [1] lkml.kernel.org/r/20180430172152.nfa564pvgpk3ut7p@linux-n805 This patch (of 2): Commit 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection") worked on the idea that we should not be mapping as root addr=0 and MAP_FIXED. However, it was reported that this scenario is in fact valid, thus making the patch both bogus and breaks userspace as well. For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem initialization[1]. [1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347 Link: http://lkml.kernel.org/r/20180503203243.15045-2-dave@stgolabs.net Fixes: 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection") Signed-off-by:
Joe Lawrence <joe.lawrence@redhat.com> Reported-by:
-
Joe Jin authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 4855c92d upstream. When run raidconfig from Dom0 we found that the Xen DMA heap is reduced, but Dom Heap is increased by the same size. Tracing raidconfig we found that the related ioctl() in megaraid_sas will call dma_alloc_coherent() to apply memory. If the memory allocated by Dom0 is not in the DMA area, it will exchange memory with Xen to meet the requiment. Later drivers call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent() the check condition (dev_addr + size - 1 <= dma_mask) is always false, it prevents calling xen_destroy_contiguous_region() to return the memory to the Xen DMA heap. This issue introduced by commit 6810df88 "xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.". Signed-off-by:
Joe Jin <joe.jin@oracle.com> Tested-by:
John Sobecki <john.sobecki@oracle.com> Reviewed-by:
Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Sudip Mukherjee authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 136d769e upstream. While whitelisting Micron M500DC drives, the tweaked blacklist entry enabled queued TRIM from M500IT variants also. But these do not support queued TRIM. And while using those SSDs with the latest kernel we have seen errors and even the partition table getting corrupted. Some part from the dmesg: [ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133 [ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.741026] ata1.00: supports DRM functions and may not be fully accessible [ 6.759887] ata1.00: configured for UDMA/133 [ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5 and then for the error: [ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen [ 120.860338] ata1.00: irq_stat 0x40000008 [ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED [ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout) [ 120.860353] ata1.00: status: { DRDY } [ 120.860543] ata1: hard resetting link [ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 121.166376] ata1.00: supports DRM functions and may not be fully accessible [ 121.186238] ata1.00: supports DRM functions and may not be fully accessible [ 121.204445] ata1.00: configured for UDMA/133 [ 121.204454] ata1.00: device reported invalid CHS sector 0 [ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current] [ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4 [ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00 [ 121.204559] print_req_error: I/O error, dev sda, sector 272512 After few reboots with these errors, and the SSD is corrupted. After blacklisting it, the errors are not seen and the SSD does not get corrupted any more. Fixes: 243918be ("libata: Do not blacklist Micron M500DC") Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 322579dc upstream. Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up regularly under sustained moderate load with NCQ enabled. Blacklist for now. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Corneliu Doban authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 5f651b87 upstream. When the host controller accepts only 32bit writes, the value of the 16bit TRANSFER_MODE register, that has the same 32bit address as the 16bit COMMAND register, needs to be saved and it will be written in a 32bit write together with the command as this will trigger the host to send the command on the SD interface. When sending the tuning command, TRANSFER_MODE is written and then sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and write it again resulting in wrong value to be written because the initial write value was saved in a shadow and the read-back returned a wrong value, from the register. Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE when a saved value exist. Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are saved for a different reason, although a scenario that will cause the mentioned problem on this registers is not probable. Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver") Signed-off-by:
Corneliu Doban <corneliu.doban@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 3ae18097 upstream. Commit f65e0d29 ("ALSA: timer: Call notifier in the same spinlock") combined the start/continue and stop/pause functions, and in doing so changed the event code for the pause case to SNDRV_TIMER_EVENT_CONTINUE. Change it back to SNDRV_TIMER_EVENT_PAUSE. Fixes: f65e0d29 ("ALSA: timer: Call notifier in the same spinlock") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit baf10564 upstream. kill_ioctx() used to have an explicit RCU delay between removing the reference from ->ioctx_table and percpu_ref_kill() dropping the refcount. At some point that delay had been removed, on the theory that percpu_ref_kill() itself contained an RCU delay. Unfortunately, that was the wrong kind of RCU delay and it didn't care about rcu_read_lock() used by lookup_ioctx(). As the result, we could get ctx freed right under lookup_ioctx(). Tejun has fixed that in a6d7cff4 ("fs/aio: Add explicit RCU grace period when freeing kioctx"); however, that fix is not enough. Suppose io_destroy() from one thread races with e.g. io_setup() from another; CPU1 removes the reference from current->mm->ioctx_table[...] just as CPU2 has picked it (under rcu_read_lock()). Then CPU1 proceeds to drop the refcount, getting it to 0 and triggering a call of free_ioctx_users(), which proceeds to drop the secondary refcount and once that reaches zero calls free_ioctx_reqs(). That does INIT_RCU_WORK(&ctx->free_rwork, free_ioctx); queue_rcu_work(system_wq, &ctx->free_rwork); and schedules freeing the whole thing after RCU delay. In the meanwhile CPU2 has gotten around to percpu_ref_get(), bumping the refcount from 0 to 1 and returned the reference to io_setup(). Tejun's fix (that queue_rcu_work() in there) guarantees that ctx won't get freed until after percpu_ref_get(). Sure, we'd increment the counter before ctx can be freed. Now we are out of rcu_read_lock() and there's nothing to stop freeing of the whole thing. Unfortunately, CPU2 assumes that since it has grabbed the reference, ctx is *NOT* going away until it gets around to dropping that reference. The fix is obvious - use percpu_ref_tryget_live() and treat failure as miss. It's not costlier than what we currently do in normal case, it's safe to call since freeing *is* delayed and it closes the race window - either lookup_ioctx() comes before percpu_ref_kill() (in which case ctx->users won't reach 0 until the caller of lookup_ioctx() drops it) or lookup_ioctx() fails, ctx->users is unaffected and caller of lookup_ioctx() doesn't see the object in question at all. Cc: stable@kernel.org Fixes: a6d7cff4 "fs/aio: Add explicit RCU grace period when freeing kioctx" Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 30da870c upstream. we unlock the directory hash too early - if we are looking at secondary link and primary (in another directory) gets removed just as we unlock, we could have the old primary moved in place of the secondary, leaving us to look into freed entry (and leaving our dentry with ->d_fsdata pointing to a freed entry). Cc: stable@vger.kernel.org # 2.4.4+ Acked-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit ba3696e9 upstream. Trivial fix to spelling mistake in debugfs_entries text. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 9a3a92cc upstream. Check the TIF_32BIT_FPREGS task setting of the tracee rather than the tracer in determining the layout of floating-point general registers in the floating-point context, correcting access to odd-numbered registers for o32 tracees where the setting disagrees between the two processes. Fixes: 597ce172 ("MIPS: Support for 64-bit FP with O32 binaries") Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: https://bugs.launchpad.net/bugs/1775771 commit 71e909c0 upstream. Correct commit 7aeb753b ("MIPS: Implement task_user_regset_view.") and expose the FIR register using the unused 4 bytes at the end of the NT_PRFPREG regset. Without that register included clients cannot use the PTRACE_GETREGSET request to retrieve the complete FPU register set and have to resort to one of the older interfaces, either PTRACE_PEEKUSR or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the register is irreversibly missing from core dumps. This register is architecturally hardwired and read-only so the write path does not matter. Ignore data supplied on writes then. Fixes: 7aeb753b ("MIPS: Implement task_user_regset_view.") Signed-off-by:
-
