- 02 Dec, 2022 8 commits
-
-
Geliang Tang authored
Some userspace pm tests failed since pm listener events have been added. Now MPTCP_EVENT_LISTENER_CREATED event becomes the first item in the events list like this: type:15,family:2,sport:10006,saddr4:0.0.0.0 type:1,token:3701282876,server_side:1,family:2,saddr4:10.0.1.1,... And no token value in this MPTCP_EVENT_LISTENER_CREATED event. This patch fixes this by specifying the type 1 item to search for token values. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Geliang Tang authored
This patch adds two new MPTCP netlink event types for PM listening socket create and close, named MPTCP_EVENT_LISTENER_CREATED and MPTCP_EVENT_LISTENER_CLOSED. Add a new function mptcp_event_pm_listener() to push the new events with family, port and addr to userspace. Invoke mptcp_event_pm_listener() with MPTCP_EVENT_LISTENER_CREATED in mptcp_listen() and mptcp_pm_nl_create_listen_socket(), invoke it with MPTCP_EVENT_LISTENER_CLOSED in __mptcp_close_ssk(). Signed-off-by:
-
Matthieu Baerts authored
Just to avoid classical Bash pitfall where variables are accidentally overridden by other functions because the proper scope has not been defined. That's also what is done in other MPTCP selftests scripts where all non local variables are defined at the beginning of the script and the others are defined with the "local" keyword. Reviewed-by:
-
Matthieu Baerts authored
It is clearer to declare these global variables at the beginning of the file as it is done in other MPTCP selftests rather than in functions in the middle of the script. So for uniformity reason, we can do the same here in mptcp_sockopt.sh. Suggested-by:
-
Matthieu Baerts authored
The definition of 'rndh' was probably copied from one script to another but some times, 'sec' was not defined, not used and/or not spelled properly. Here all the 'rndh' are now defined the same way. Reviewed-by:
-
Matthieu Baerts authored
Some variables were set but never used. This was not causing any issues except adding some confusion and having shellcheck complaining about them. Reviewed-by:
-
Matthieu Baerts authored
A new "sandbox" net namespace is available where no other netfilter rules have been added. Use this new netns instead of re-using "ns1" and clean it. Reviewed-by:
-
Jakub Kicinski authored
I must have missed that these stats are only exposed via the unstructured ethtool -S when they got merged. Plumb in the structured form. Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20221130013108.90062-1-kuba@kernel.orgSigned-off-by:
-
- 01 Dec, 2022 32 commits
-
-
Jakub Kicinski authored
Arınç ÜNAL says: ==================== remove label = "cpu" from DSA dt-binding With this patch series, we're completely getting rid of 'label = "cpu";' which is not used by the DSA dt-binding at all. Information for taking the patches for maintainers: Patch 1: netdev maintainers (based off netdev/net-next.git main) Patch 2-3: SoC maintainers (based off soc/soc.git soc/dt) Patch 4: MIPS maintainers (based off mips/linux.git mips-next) Patch 5: PowerPC maintainers (based off powerpc/linux.git next-test) I've been meaning to submit this for a few months. Find the relevant conversation here: https://lore.kernel.org/netdev/20220913155408.GA3802998-robh@kernel.org/ Here's how I did it, for the interested (or suggestions): Find the platforms which have got 'label = "cpu";' defined. grep -rnw . -e 'label = "cpu";' Remove the line where 'label = "cpu";' is included. sed -i /'label = "cpu";'/,+d arch/arm/boot/dts/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/freescale/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/marvell/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/mediatek/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/rockchip/* sed -i /'label = "cpu";'/,+d arch/mips/boot/dts/qca/* sed -i /'label = "cpu";'/,+d arch/mips/boot/dts/ralink/* sed -i /'label = "cpu";'/,+d arch/powerpc/boot/dts/turris1x.dts sed -i /'label = "cpu";'/,+d Documentation/devicetree/bindings/net/qca,ar71xx.yaml Restore the symlink files which typechange after running sed. ==================== Link: https://lore.kernel.org/r/20221130141040.32447-1-arinc.unal@arinc9.comSigned-off-by:
-
Arınç ÜNAL authored
This is not used by the DSA dt-binding, so remove it from the examples. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jakub Kicinski authored
Dmitry Safonov says: ==================== net/tcp: Dynamically disable TCP-MD5 static key The static key introduced by commit 6015c71e ("tcp: md5: add tcp_md5_needed jump label") is a fast-path optimization aimed at avoiding a cache line miss. Once an MD5 key is introduced in the system the static key is enabled and never disabled. Address this by disabling the static key when the last tcp_md5sig_info in system is destroyed. Previously it was submitted as a part of TCP-AO patches set [1]. Now in attempt to split 36 patches submission, I send this independently. Version 5: https://lore.kernel.org/all/20221122185534.308643-1-dima@arista.com/T/#u Version 4: https://lore.kernel.org/all/20221115211905.1685426-1-dima@arista.com/T/#u Version 3: https://lore.kernel.org/all/20221111212320.1386566-1-dima@arista.com/T/#u Version 2: https://lore.kernel.org/all/20221103212524.865762-1-dima@arista.com/T/#u Version 1: https://lore.kernel.org/all/20221102211350.625011-1-dima@arista.com/T/#u [1]: https://lore.kernel.org/all/20221027204347.529913-1-dima@arista.com/T/#u ==================== Link: https://lore.kernel.org/r/20221123173859.473629-1-dima@arista.comSigned-off-by:
-
Dmitry Safonov authored
Convert BUG_ON() to WARN_ON_ONCE() and warn as well for unlikely static key int overflow error-path. Signed-off-by:
Dmitry Safonov <dima@arista.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dmitry Safonov authored
If the kernel was short on (atomic) memory and failed to allocate it - don't proceed to creation of request socket. Otherwise the socket would be unsigned and userspace likely doesn't expect that the TCP is not MD5-signed anymore. Signed-off-by:
-
Dmitry Safonov authored
To do that, separate two scenarios: - where it's the first MD5 key on the system, which means that enabling of the static key may need to sleep; - copying of an existing key from a listening socket to the request socket upon receiving a signed TCP segment, where static key was already enabled (when the key was added to the listening socket). Now the life-time of the static branch for TCP-MD5 is until: - last tcp_md5sig_info is destroyed - last socket in time-wait state with MD5 key is closed. Which means that after all sockets with TCP-MD5 keys are gone, the system gets back the performance of disabled md5-key static branch. While at here, provide static_key_fast_inc() helper that does ref counter increment in atomic fashion (without grabbing cpus_read_lock() on CONFIG_JUMP_LABEL=y). This is needed to add a new user for a static_key when the caller controls the lifetime of another user. Signed-off-by:
-
Dmitry Safonov authored
Add a helper to allocate tcp_md5sig_info, that will help later to do/allocate things when info allocated, once per socket. Signed-off-by:
-
Dmitry Safonov authored
1. With CONFIG_JUMP_LABEL=n static_key_slow_inc() doesn't have any protection against key->enabled refcounter overflow. 2. With CONFIG_JUMP_LABEL=y static_key_slow_inc_cpuslocked() still may turn the refcounter negative as (v + 1) may overflow. key->enabled is indeed a ref-counter as it's documented in multiple places: top comment in jump_label.h, Documentation/staging/static-keys.rst, etc. As -1 is reserved for static key that's in process of being enabled, functions would break with negative key->enabled refcount: - for CONFIG_JUMP_LABEL=n negative return of static_key_count() breaks static_key_false(), static_key_true() - the ref counter may become 0 from negative side by too many static_key_slow_inc() calls and lead to use-after-free issues. These flaws result in that some users have to introduce an additional mutex and prevent the reference counter from overflowing themselves, see bpf_enable_runtime_stats() checking the counter against INT_MAX / 2. Prevent the reference counter overflow by checking if (v + 1) > 0. Change functions API to return whether the increment was successful. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipJakub Kicinski authored
Pull in locking/core from tip (just a single patch) to avoid a conflict with a jump_label change needed by a TCP cleanup. Link: https://lore.kernel.org/all/Y4B17nBArWS1Iywo@hirez.programming.kicks-ass.net/Signed-off-by:
-
Juhee Kang authored
The open code is defined as a helper function(tp_to_dev) on r8169_main.c, which the open code is &tp->pci_dev->dev. The helper function was added in commit 1e1205b7 ("r8169: add helper tp_to_dev"). And then later, commit f1e911d5 ("r8169: add basic phylib support") added r8169_phylink_handler function but it didn't use the helper function. Thus, tp_to_dev() replaces the open code. This patch doesn't change logic. Signed-off-by:
Juhee Kang <claudiajkang@gmail.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20221129161244.5356-1-claudiajkang@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Vladimir Oltean says: ==================== Fix rtnl_mutex deadlock with DPAA2 and SFP modules This patch set deliberately targets net-next and lacks Fixes: tags due to caution on my part. While testing some SFP modules on the Solidrun Honeycomb LX2K platform, I noticed that rebooting causes a deadlock: ============================================ WARNING: possible recursive locking detected 6.1.0-rc5-07010-ga9b9500ffaac-dirty #656 Not tainted -------------------------------------------- systemd-shutdow/1 is trying to acquire lock: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30 but task is already holding lock: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtnl_mutex); lock(rtnl_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by systemd-shutdow/1: #0: ffffa62db6863c70 (system_transition_mutex){+.+.}-{4:4}, at: __do_sys_reboot+0xd4/0x260 #1: ffff2f2b0176f100 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xf4/0x260 #2: ffff2f2b017be900 (&dev->mutex){....}-{4:4}, at: device_shutdown+0x104/0x260 #3: ffff2f2b017680f0 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x40/0x260 #4: ffff2f2b0e1608f0 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x40/0x260 #5: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30 stack backtrace: CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-rc5-07010-ga9b9500ffaac-dirty #656 Hardware name: SolidRun LX2160A Honeycomb (DT) Call trace: lock_acquire+0x68/0x84 __mutex_lock+0x98/0x460 mutex_lock_nested+0x2c/0x40 rtnl_lock+0x1c/0x30 sfp_bus_del_upstream+0x1c/0xac phylink_destroy+0x1c/0x50 dpaa2_mac_disconnect+0x28/0x70 dpaa2_eth_remove+0x1dc/0x1f0 fsl_mc_driver_remove+0x24/0x60 device_remove+0x70/0x80 device_release_driver_internal+0x1f0/0x260 device_links_unbind_consumers+0xe0/0x110 device_release_driver_internal+0x138/0x260 device_release_driver+0x18/0x24 bus_remove_device+0x12c/0x13c device_del+0x16c/0x424 fsl_mc_device_remove+0x28/0x40 __fsl_mc_device_remove+0x10/0x20 device_for_each_child+0x5c/0xac dprc_remove+0x94/0xb4 fsl_mc_driver_remove+0x24/0x60 device_remove+0x70/0x80 device_release_driver_internal+0x1f0/0x260 device_release_driver+0x18/0x24 bus_remove_device+0x12c/0x13c device_del+0x16c/0x424 fsl_mc_bus_remove+0x8c/0x10c fsl_mc_bus_shutdown+0x10/0x20 platform_shutdown+0x24/0x3c device_shutdown+0x15c/0x260 kernel_restart+0x40/0xa4 __do_sys_reboot+0x1e4/0x260 __arm64_sys_reboot+0x24/0x30 But fixing this appears to be not so simple. The patch set represents my attempt to address it. In short, the problem is that dpaa2_mac_connect() and dpaa2_mac_disconnect() call 2 phylink functions in a row, one takes rtnl_lock() itself - phylink_create(), and one which requires rtnl_lock() to be held by the caller - phylink_fwnode_phy_connect(). The existing approach in the drivers is too simple. We take rtnl_lock() when calling dpaa2_mac_connect(), which is what results in the deadlock. Fixing just that creates another problem. The drivers make use of rtnl_lock() for serializing with other code paths too. I think I've found all those code paths, and established other mechanisms for serializing with them. ==================== Link: https://lore.kernel.org/r/20221129141221.872653-1-vladimir.oltean@nxp.comSigned-off-by: -
Vladimir Oltean authored
After the introduction of a private mac_lock that serializes access to priv->mac (and port_priv->mac in the switch), the only remaining purpose of rtnl_lock() is to satisfy the locking requirements of phylink_fwnode_phy_connect() and phylink_disconnect_phy(). But the functions these live in, dpaa2_mac_connect() and dpaa2_mac_disconnect(), have contradictory locking requirements. While phylink_fwnode_phy_connect() wants rtnl_lock() to be held, phylink_create() wants it to not be held. Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch drivers) to only surround the phylink calls that require it, in the dpaa2-mac library code. This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect() run unlocked, and there isn't any danger of an AB/BA deadlock between the rtnl_mutex and other private locks. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by:
-
Vladimir Oltean authored
The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth driver, so we need to duplicate the locking solution established by the previous change to the switch driver as well. Signed-off-by:
-
Vladimir Oltean authored
The dpaa2 architecture permits dynamic connections between objects on the fsl-mc bus, specifically between a DPNI object (represented by a struct net_device) and a DPMAC object (represented by a struct phylink). The DPNI driver is notified when those connections are created/broken through the dpni_irq0_handler_thread() method. To ensure that ethtool operations, as well as netdev up/down operations serialize with the connection/disconnection of the DPNI with a DPMAC, dpni_irq0_handler_thread() takes the rtnl_lock() to block those other operations from taking place. There is code called by dpaa2_mac_connect() which wants to acquire the rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() -> sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite work out, even though it's fairly simple. Create a different strategy, where all code paths in the dpaa2-eth driver access priv->mac only while they are holding priv->mac_lock. The phylink instance is not created or connected to the PHY under the priv->mac_lock, but only assigned to priv->mac then. This will eliminate the reliance on the rtnl_mutex. Add lockdep annotations and put comments where holding the lock is not necessary, and priv->mac can be dereferenced freely. Signed-off-by:
-
Vladimir Oltean authored
dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from dpni_irq0_handler_thread(). It could happen that the DPNI gets connected to a DPMAC on the fsl-mc bus exactly during probe, as soon as the "endpoint change" interrupt is requested in dpaa2_eth_setup_irqs(). This will cause the dpni_irq0_handler_thread() to register a phylink instance for that DPMAC. Then, the probing function will also try to register a phylink instance for the same DPMAC, operation which should fail (and this will fail the probing of the driver). Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that dpni_irq0_handler_thread() never races with the DPMAC-related portion of the probing path. Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of dpaa2_eth_connect_mac() in the teardown path. Signed-off-by:
-
Vladimir Oltean authored
The helper function will gain a lockdep annotation in a future patch. Make sure to benefit from it. Signed-off-by:
-
Vladimir Oltean authored
DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S" unstructured counters. Those counters are only shown for the entity owning the netdev (DPNI, DPSW) if it's connected to a DPMAC. The ethtool stringset code path is split into multiple callbacks, but currently, connecting and disconnecting the DPMAC takes the rtnl_lock(). This blocks the entire ethtool code path from running, see ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() -> strset_prepare_data(). This is going to be a problem if we are going to no longer require rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC could appear between ops->get_sset_count() and ops->get_strings(). If it appears out of the blue, we will provide a stringset into an array that was dimensioned thinking the DPMAC wouldn't be there => array accessed out of bounds. There isn't really a good way to work around that, and I don't want to put too much pressure on the ethtool framework by playing locking games. Just make the DPMAC counters be always available. They'll be zeroes if the DPNI or DPSW isn't connected to a DPMAC. Signed-off-by:
-
Vladimir Oltean authored
The dpaa2-switch has the exact same locking requirements when connected to a DPMAC, so it needs port_priv->mac to always point either to NULL, or to a DPMAC with a fully initialized phylink instance. Make the same preparatory change in the dpaa2-switch driver as in the dpaa2-eth one. Signed-off-by:
-
Vladimir Oltean authored
There are 2 requirements for correct code: - Any time the driver accesses the priv->mac pointer at runtime, it either holds NULL to indicate a DPNI-DPNI connection (or unconnected DPNI), or a struct dpaa2_mac whose phylink instance was fully initialized (created and connected to the PHY). No changes are made to priv->mac while it is being used. Currently, rtnl_lock() watches over the call to dpaa2_eth_connect_mac(), so it serves the purpose of serializing this with all readers of priv->mac. - dpaa2_mac_connect() should run unlocked, because inside it are 2 phylink calls with incompatible locking requirements: phylink_create() requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect() requires that the rtnl_mutex is held. The only way to solve those contradictory requirements is to let dpaa2_mac_connect() take rtnl_lock() when it needs to. To solve both requirements, we need to identify the writer side of the priv->mac pointer, which can be wrapped in a mutex private to the driver in a future patch. The dpaa2_mac_connect() cannot be part of the writer side critical section, because of an AB/BA deadlock with rtnl_lock(). So the strategy needs to be that where we prepare the DPMAC by calling dpaa2_mac_connect(), and only make priv->mac point to it once it's fully prepared. This ensures that the writer side critical section has the absolute minimum surface it can. The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code path. This makes sure that priv->mac is NULL when we start tearing down the DPMAC that we disconnected from, and concurrent code will simply not see it. No locking changes in this patch (concurrent code is still blocked by the rtnl_mutex). Signed-off-by:
-
Vladimir Oltean authored
dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if dpaa2_mac_connect() failed, or was never called. The callers are these: dpaa2_eth_disconnect_mac(): if (dpaa2_eth_is_type_phy(priv)) dpaa2_mac_disconnect(priv->mac); dpaa2_switch_port_disconnect_mac(): if (dpaa2_switch_port_is_type_phy(port_priv)) dpaa2_mac_disconnect(port_priv->mac); priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns false, and dpaa2_mac_disconnect() is never called. Similar for dpaa2-switch. When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned zero (success), and therefore, priv->mac->phylink is also a valid pointer. Signed-off-by:
-
Vladimir Oltean authored
The phylink handling is intended to be hidden inside the dpaa2_mac object. Move the phylink_start() call into dpaa2_mac_start(), and phylink_stop() into dpaa2_mac_stop(). Signed-off-by:
-
Vladimir Oltean authored
dpaa2_mac_is_type_fixed() is a header with no implementation and no callers, which is referenced from the documentation though. It can be deleted. On the other hand, it would be useful to reuse the code between dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common code should be called dpaa2_mac_is_type_phy(), so let's create that. The removal and the addition are merged into the same patch because, in fact, is_type_phy() is the logical opposite of is_type_fixed(). Signed-off-by:
-
Vladimir Oltean authored
dpaa2_eth_setup_dpni() is called from the probe path and dpaa2_eth_set_link_ksettings() is propagated to user space. include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3 protocol". Conventional wisdom has it to not use it in networking drivers. Replace it with -EOPNOTSUPP. Signed-off-by:
-
Dan Carpenter authored
If vcap_dup_rule() fails that leads to an error pointer dereference side the call to vcap_free_rule(). Also it only returns an error if the very last call to vcap_read_rule() fails and it returns success for other errors. I've changed it to just stop printing after the first error and return an error code. Fixes: 3a792156 ("net: microchip: sparx5: Add VCAP rule debugFS support for the VCAP API") Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/Y4XUUx9kzurBN+BV@kiliSigned-off-by:
-
Dan Carpenter authored
The "ignore_updelay" variable needs to be initialized to false. Fixes: f8a65ab2 ("bonding: fix link recovery in mode 2 when updelay is nonzero") Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kiliSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2022-11-29 Misc update for mlx5 driver 1) Various trivial cleanups 2) Maor Dickman, Adds support for trap offload with additional actions 3) From Tariq, UMR (device memory registrations) cleanups, UMR WQE must be aligned to 64B per device spec, (not a bug fix). * tag 'mlx5-updates-2022-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Support devlink reload of IPsec core net/mlx5e: TC, Add offload support for trap with additional actions net/mlx5e: Do early return when setup vports dests for slow path flow net/mlx5: Remove redundant check net/mlx5e: Delete always true DMA check net/mlx5e: Don't access directly DMA device pointer net/mlx5e: Don't use termination table when redundant net/mlx5: Fix orthography errors in documentation net/mlx5: Use generic definition for UMR KLM alignment net/mlx5: Generalize name of UMR alignment definition net/mlx5: Remove unused UMR MTT definitions net/mlx5e: Add padding when needed in UMR WQEs net/mlx5: Remove unused ctx variables net/mlx5e: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper net/mlx5e: Remove unneeded io-mapping.h #include ==================== Link: https://lore.kernel.org/r/20221130051152.479480-1-saeed@kernel.orgSigned-off-by:
-
Xiaolei Wang authored
If the external phy used by current mac interface is managed by another mac interface, it means that this network port cannot work independently, especially when the system suspends and resumes, the following trace may appear, so we should create a device link between phy dev and mac dev. WARNING: CPU: 0 PID: 24 at drivers/net/phy/phy.c:983 phy_error+0x20/0x68 Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:2 Not tainted 6.1.0-rc3-00011-g5aaef24b-dirty #34 Hardware name: Freescale i.MX6 SoloX (Device Tree) Workqueue: events_power_efficient phy_state_machine unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x90 dump_stack_lvl from __warn+0xb4/0x24c __warn from warn_slowpath_fmt+0x5c/0xd8 warn_slowpath_fmt from phy_error+0x20/0x68 phy_error from phy_state_machine+0x22c/0x23c phy_state_machine from process_one_work+0x288/0x744 process_one_work from worker_thread+0x3c/0x500 worker_thread from kthread+0xf0/0x114 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf0951fb0 to 0xf0951ff8) Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Vincent Mailhol says: ==================== net: devlink: return the driver name in devlink_nl_info_fill The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. The goal of this series is to have the devlink core to report this information instead of the drivers. The first patch fulfills the actual goal of this series: modify devlink core to report the driver name and clean-up all drivers. Both have to be done in an atomic change to avoid attribute duplication. This same patch also removes the devlink_info_driver_name_put() function to prevent future drivers from reporting the driver name themselves. The second patch allows the core to call devlink_nl_info_fill() even if the devlink_ops::info_get() callback is NULL. This leads to the third and final patch which cleans up the drivers which have an empty info_get(). ==================== Link: https://lore.kernel.org/r/20221129095140.3913303-1-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
devlink_ops::info_get() is now optional and devlink will continue to report information even if that callback gets removed. Remove all the empty devlink_ops::info_get() callbacks from the drivers. Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Vincent Mailhol authored
Some drivers only reported the driver name in their devlink_ops::info_get() callback. Now that the core provides this information, the callback became empty. For such drivers, just removing the callback would prevent the core from executing devlink_nl_info_fill() meaning that "devlink dev info" would not return anything. Make the callback function optional by executing devlink_nl_info_fill() even if devlink_ops::info_get() is NULL. N.B.: the drivers with devlink support which previously did not implement devlink_ops::info_get() will now also be able to report the driver name. Signed-off-by:
-
Vincent Mailhol authored
The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by:
-
Luca Weiss authored
The NQ310 is another NFC chip from NXP, document the compatible in the bindings. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221128173744.833018-1-luca@z3ntu.xyzSigned-off-by:
-
