The following sequence of operations results in a refcount warning:

1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.

------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0:                   00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---

The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.

Since commit 8979b02a ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.

Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.

Commit fdc915f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.

Fix this by putting chip->devs in tpm_chip_unregister().

Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.

Cc: stable@vger.kernel.org
Fixes: fdc915f7 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes: 8979b02a ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

With the introduction of uefi_check_trust_mok_keys, it signifies the end-
user wants to trust the machine keyring as trusted keys.  If they have
chosen to trust the machine keyring, load the qualifying keys into it
during boot, then link it to the secondary keyring .  If the user has not
chosen to trust the machine keyring, it will be empty and not linked to
the secondary keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

A new Machine Owner Key (MOK) variable called MokListTrustedRT has been
introduced in shim. When this UEFI variable is set, it indicates the
end-user has made the decision themselves that they wish to trust MOK keys
within the Linux trust boundary.  It is not an error if this variable
does not exist. If it does not exist, the MOK keys should not be trusted
within the kernel.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Move up the init order so it can be used by the new machine keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Introduce a new link restriction that includes the trusted builtin,
secondary and machine keys. The restriction is based on the key to be
added being vouched for by a key in any of these three keyrings.

With the introduction of the machine keyring, the end-user may choose to
trust Machine Owner Keys (MOK) within the kernel. If they have chosen to
trust them, the .machine keyring will contain these keys.  If not, the
machine keyring will always be empty.  Update the restriction check to
allow the secondary trusted keyring to also trust machine keys.

Allow the .machine keyring to be linked to the secondary_trusted_keys.
After the link is created, keys contained in the .machine keyring will
automatically be searched when searching secondary_trusted_keys.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Expose the .machine keyring created in integrity code by adding
a reference.  Store a reference to the machine keyring in
system keyring code. The system keyring code needs this to complete
the keyring link to the machine keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Currently both Secure Boot DB and Machine Owner Keys (MOK) go through
the same keyring handler (get_handler_for_db). With the addition of the
new machine keyring, the end-user may choose to trust MOK keys.

Introduce a new keyring handler specific for MOK keys.  If MOK keys are
trusted by the end-user, use the new keyring handler instead.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Many UEFI Linux distributions boot using shim.  The UEFI shim provides
what is called Machine Owner Keys (MOK). Shim uses both the UEFI Secure
Boot DB and MOK keys to validate the next step in the boot chain.  The
MOK facility can be used to import user generated keys.  These keys can
be used to sign an end-users development kernel build.  When Linux
boots, both UEFI Secure Boot DB and MOK keys get loaded in the Linux
.platform keyring.

Define a new Linux keyring called machine.  This keyring shall contain just
MOK keys and not the remaining keys in the platform keyring. This new
machine keyring will be used in follow on patches.  Unlike keys in the
platform keyring, keys contained in the machine keyring will be trusted
within the kernel if the end-user has chosen to do so.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

make W=1 generates the following warning in keyring_handler.c

security/integrity/platform_certs/keyring_handler.c:71:30: warning: no previous prototype for get_handler_for_db [-Wmissing-prototypes]
 __init efi_element_handler_t get_handler_for_db(const efi_guid_t *sig_type)
                              ^~~~~~~~~~~~~~~~~~
security/integrity/platform_certs/keyring_handler.c:82:30: warning: no previous prototype for get_handler_for_dbx [-Wmissing-prototypes]
 __init efi_element_handler_t get_handler_for_dbx(const efi_guid_t *sig_type)
                              ^~~~~~~~~~~~~~~~~~~
Add the missing prototypes by including keyring_handler.h.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

If one loads and unloads the trusted module, trusted_key_exit can be
NULL. Call it through static_call_cond() to avoid a kernel trap.

Fixes: 5d0682be ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.

When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.

Fixes: 5d0682be ("KEYS: trusted: Add generic trusted keys framework")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.

Also, address the following sparse warning:
drivers/char/tpm/xen-tpmfront.c:131:16: warning: using sizeof on a flexible structure

Link: https://github.com/KSPP/linux/issues/160
Link: https://github.com/KSPP/linux/issues/174Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The X.509 parser always sets cert->sig->pkey_algo and
cert->sig->hash_algo on success, since x509_note_sig_algo() is a
mandatory action in the X.509 ASN.1 grammar, and it returns an error if
the signature's algorithm is unknown.  Thus, remove the dead code which
handled these fields being NULL.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The X.509 parser always sets cert->pub->pkey_algo on success, since
x509_extract_key_data() is a mandatory action in the X.509 ASN.1
grammar, and it returns an error if the algorithm is unknown.  Thus,
remove the dead code which handled this field being NULL.  This results
in the ->unsupported_key flag never being set, so remove that too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Remove unused fields from struct x509_parse_context.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

An X.509 certificate has two, potentially different public key
algorithms: the one used by the certificate's key, and the one that was
used to sign the certificate.  Some of the naming made it unclear which
algorithm was meant.  Rename things appropriately:

    - x509_note_pkey_algo() => x509_note_sig_algo()
    - algo_oid => sig_algo
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties.  Fix it to check against
the correct properties.

Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size.  However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated).  Of
course, future key types could have different values as well.

Fixes: 00d60fd3 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Add a test for /dev/tpmrm0 in async mode that checks if
the code handles invalid handles correctly.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <linux-integrity@vger.kernel.org>
Cc: <linux-kselftest@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>

Fixes: 9e1b74a6 ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Determine an available PCR bank to be used by a test case by querying the
capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that
contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks
and the bitmasks that show which PCRs are enabled in each bank. Collect
the data in a dictionary. From the dictionary determine the PCR bank that
has the PCRs enabled that the test needs. This avoids test failures with
TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is
disabled.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull MTD fix from Miquel Raynal:
 "As part of a previous changeset introducing support for the K3
  architecture, the OMAP_GPMC (a non visible symbol) got selected by the
  selection of MTD_NAND_OMAP2 instead of doing so from the architecture
  directly (like for the other users of these two drivers). Indeed, from
  a hardware perspective, the OMAP NAND controller needs the GPMC to
  work.

  This led to a robot error which got addressed in fix merge into -rc4.
  Unfortunately, the approach at this time still used "select" and lead
  to further build error reports (sparc64:allmodconfig).

  This time we switch to 'depends on' in order to prevent random
  misconfigurations. The different dependencies will however need a
  future cleanup"

* tag 'mtd/fixes-for-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: omap2: Actually prevent invalid configuration and build error

Pull virtio fixes from Michael Tsirkin:
 "Some last minute fixes that took a while to get ready. Not
  regressions, but they look safe and seem to be worth to have"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: handle fallout from folio work
  tools/virtio: fix virtio_test execution
  vhost: remove avail_event arg from vhost_update_avail_event()
  virtio: drop default for virtio-mem
  vdpa: fix use-after-free on vp_vdpa_remove
  virtio-blk: Remove BUG_ON() in virtio_queue_rq()
  virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero
  vhost: fix hung thread due to erroneous iotlb entries
  vduse: Fix returning wrong type in vduse_domain_alloc_iova()
  vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
  vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
  vdpa: factor out vdpa_set_features_unlocked for vdpa internal use
  virtio_console: break out of buf poll on remove
  virtio: document virtio_reset_device
  virtio: acknowledge all features before access
  virtio: unexport virtio_finalize_features

Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.

The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
  must take precedence over DMA_ATTR_SKIP_CPU_SYNC

Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.

Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.

To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89de ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The root of the problem is that we are selecting symbols that have
dependencies. This can cause random configurations that can fail.
The cleanest solution is to avoid using select.

This driver uses interfaces from the OMAP_GPMC driver so we have to
depend on it instead.

Fixes: 4cd335da ("mtd: rawnand: omap2: Prevent invalid configuration and build error")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org

Pull btrfs fixes from David Sterba:
 "A few more fixes for various problems that have user visible effects
  or seem to be urgent:

   - fix corruption when combining DIO and non-blocking io_uring over
     multiple extents (seen on MariaDB)

   - fix relocation crash due to premature return from commit

   - fix quota deadlock between rescan and qgroup removal

   - fix item data bounds checks in tree-checker (found on a fuzzed
     image)

   - fix fsync of prealloc extents after EOF

   - add missing run of delayed items after unlink during log replay

   - don't start relocation until snapshot drop is finished

   - fix reversed condition for subpage writers locking

   - fix warning on page error"

* tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fallback to blocking mode when doing async dio over multiple extents
  btrfs: add missing run of delayed items after unlink during log replay
  btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
  btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
  btrfs: do not start relocation until in progress drops are done
  btrfs: tree-checker: use u64 for item data end to avoid overflow
  btrfs: do not WARN_ON() if we have PageError set
  btrfs: fix lost prealloc extents beyond eof after full fsync
  btrfs: subpage: fix a wrong check on subpage->writers

Pull kvm fixes from Paolo Bonzini:
 "x86 guest:

   - Tweaks to the paravirtualization code, to avoid using them when
     they're pointless or harmful

  x86 host:

   - Fix for SRCU lockdep splat

   - Brown paper bag fix for the propagation of errno"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run
  KVM: x86/mmu: Passing up the error state of mmu_alloc_shadow_roots()
  KVM: x86: Yield to IPI target vCPU only if it is busy
  x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64
  x86/kvm: Don't waste memory if kvmclock is disabled
  x86/kvm: Don't use PV TLB/yield when mwait is advertised

Pull powerpc fix from Michael Ellerman:
 "Fix build failure when CONFIG_PPC_64S_HASH_MMU is not set.

  Thanks to Murilo Opsfelder Araujo, and Erhard F"

* tag 'powerpc-5.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix build failure when CONFIG_PPC_64S_HASH_MMU is not set

Pull tracing fixes from Steven Rostedt:

 - Fix sorting on old "cpu" value in histograms

 - Fix return value of __setup() boot parameter handlers

* tag 'trace-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix return value of __setup handlers
  tracing/histogram: Fix sorting on old "cpu" value

just add a stub
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.

Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

In vhost_update_avail_event() we never used the `avail_event` argument,
since its introduction in commit 2723feaa ("vhost: set log when
updating used flags or avail event").

Let's remove it to clean up the code.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220113141134.186773-1-sgarzare@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

There's no special reason why virtio-mem needs a default that's
different from what kconfig provides, any more than e.g. virtio blk.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>

When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device
and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove,
triggering use-after-free.

Call Trace of unbinding driver free vp_vdpa :
do_syscall_64
  vfs_write
    kernfs_fop_write_iter
      device_release_driver_internal
        pci_device_remove
          vp_vdpa_remove
            vdpa_unregister_device
              kobject_release
                device_release
                  kfree

Call Trace of dereference vp_vdpa->mdev.pci_dev:
vp_modern_remove
  pci_release_selected_regions
    pci_release_region
      pci_resource_len
        pci_resource_end
          (dev)->resource[(bar)].end
Signed-off-by: Zhang Min <zhang.min9@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/20220301091059.46869-1-wang.yi59@zte.com.cnSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 64b9f64f ("vdpa: introduce virtio pci driver")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

Currently we have a BUG_ON() to make sure the number of sg
list does not exceed queue_max_segments() in virtio_queue_rq().
However, the block layer uses queue_max_discard_segments()
instead of queue_max_segments() to limit the sg list for
discard requests. So the BUG_ON() might be triggered if
virtio-blk device reports a larger value for max discard
segment than queue_max_segments(). To fix it, let's simply
remove the BUG_ON() which has become unnecessary after commit
02746e26("virtio-blk: avoid preallocating big SGL for data").
And the unused vblk->sg_elems can also be removed together.

Fixes: 1f23816b ("virtio_blk: add discard and write zeroes support")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20220304100058.116-2-xieyongji@bytedance.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Currently the value of max_discard_segment will be set to
MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device
set 0 to max_discard_seg in configuration space. It's incorrect
since the device might not be able to handle such large descriptors.
To fix it, let's follow max_segments restrictions in this case.

Fixes: 1f23816b ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when
start is 0 and last is ULONG_MAX. One instance where it can happen
is when userspace sends an IOTLB message with iova=size=uaddr=0
(vhost_process_iotlb_msg). So, an entry with size = 0, start = 0,
last = ULONG_MAX ends up in the iotlb. Next time a packet is sent,
iotlb_access_ok() loops indefinitely due to that erroneous entry.

	Call Trace:
	 <TASK>
	 iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340
	 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366
	 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104
	 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372
	 kthread+0x2e9/0x3a0 kernel/kthread.c:377
	 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
	 </TASK>

Reported by syzbot at:
	https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87

To fix this, do two things:

1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map
   a range with size 0.
2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX]
   by splitting it into two entries.

Fixes: 0bbe3066 ("vhost: factor out IOTLB")
Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20220305095525.5145-1-mail@anirudhrb.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull input updates from Dmitry Torokhov:

 - a fixup for Goodix touchscreen driver allowing it to work on certain
   Cherry Trail devices

 - a fix for imbalanced enable/disable regulator in Elam touchpad driver
   that became apparent when used with Asus TF103C 2-in-1 dock

 - a couple new input keycodes used on newer keyboards

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  HID: add mapping for KEY_ALL_APPLICATIONS
  HID: add mapping for KEY_DICTATE
  Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
  Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
  Input: goodix - workaround Cherry Trail devices with a bogus ACPI Interrupt() resource
  Input: goodix - use the new soc_intel_is_byt() helper
  Input: samsung-keypad - properly state IOMEM dependency

Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (hugetlb, pagemap, and
  userfaultfd), memfd, selftests, and kconfig"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  configs/debug: set CONFIG_DEBUG_INFO=y properly
  proc: fix documentation and description of pagemap
  kselftest/vm: fix tests build with old libc
  memfd: fix F_SEAL_WRITE after shmem huge page allocated
  mm: fix use-after-free when anon vma name is used after vma is freed
  mm: prevent vm_area_struct::anon_name refcount saturation
  mm: refactor vm_area_struct::anon_vma_name usage code
  selftests/vm: cleanup hugetlb file after mremap test

Pull s390 fixes from Vasily Gorbik:

 - Fix HAVE_DYNAMIC_FTRACE_WITH_ARGS implementation by providing correct
   switching between ftrace_caller/ftrace_regs_caller and supplying
   pt_regs only when ftrace_regs_caller is activated.

 - Fix exception table sorting.

 - Fix breakage of kdump tooling by preserving metadata it cannot
   function without.

* tag 's390-5.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/extable: fix exception table sorting
  s390/ftrace: fix arch_ftrace_get_regs implementation
  s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
  s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE