- 02 Jul, 2022 1 commit
-
-
Pablo Neira Ayuso authored
Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d740264 ("netfilter: nf_tables: variable sized set element keys / data") Reported-by:
Hugues ANGUELKOV <hanguelkov@randorisec.fr> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 30 Jun, 2022 8 commits
-
-
Jose Alonso authored
This patch corrects packet receiving in ax88179_rx_fixup. - problem observed: ifconfig shows allways a lot of 'RX Errors' while packets are received normally. This occurs because ax88179_rx_fixup does not recognise properly the usb urb received. The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors. (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify another packet there) This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU: 0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ^ packet 1 start (pkt_len = 0x05ec) ^^^^ IP alignment pseudo header ^ ethernet packet start last byte ethernet packet v padding (8-bytes aligned) vvvv vvvv 0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811 0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 2 0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... 0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0 ... 0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0 ... 0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0 ... 0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 7 0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a 0x2130: f032 e093 7489 0740 3008 ec05 0000 0080 ====1==== ====2==== hdr_off ^ pkt_len = 0x05ec ^^^^ AX_RXHDR_*=0x00830 ^^^^ ^ pkt_len = 0 ^^^^ AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^ 0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080 0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080 0x2160: 3008 5803 0000 0080 3008 c800 0000 0080 ===11==== ===12==== ===13==== ===14==== 0x2170: 0000 0000 0e00 3821 ^^^^ ^^^^ rx_hdr ^^^^ pkt_cnt=14 ^^^^ hdr_off=0x2138 ^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!? My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware. There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit. Note that packets have a alignment of 64-bits (8-bytes). This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code. This patch was made using only the dumpfile information and tested with only one device: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Fixes: 57bc3d3a ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by:Jose Alonso <joalonsof@gmail.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.comSigned-off-by:
-
Yevhen Orlov authored
commit 0622cab0 ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0 ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 Fixes: 0622cab0 ("bonding: fix 802.3ad aggregator reselection") Co-developed-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.euSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 88e2ca30 ("mld: convert ifmcaddr6 to RCU") Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.comSigned-off-by:
-
Oleksij Rempel authored
In case of asix_ax88772a_link_change_notify() workaround, we run soft reset which will automatically clear MII_ADVERTISE configuration. The PHYlib framework do not know about changed configuration state of the PHY, so we need use phy_init_hw() to reinit PHY configuration. Fixes: dde25846 ("net: usb/phy: asix: add support for ax88772A/C PHYs") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.deSigned-off-by:
-
Lukas Wunner authored
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by:
-
Oliver Neukum authored
usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers. Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.comSigned-off-by:
-
Coleman Dietsch authored
The incorrect path is causing the following error when trying to run net kselftests: In file included from bpf/nat6to4.c:43: ../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found ^~~~~~~~~~~~~~~~~~~ 1 error generated. Fixes: cf67838c ("selftests net: fix bpf build error") Signed-off-by:Coleman Dietsch <dietschc@csp.edu> Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.eduSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Restore set counter when one of the CPU loses race to add elements to sets. 2) After NF_STOLEN, skb might be there no more, update nftables trace infra to avoid access to skb in this case. From Florian Westphal. 3) nftables bridge might register a prerouting hook with zero priority, br_netfilter incorrectly skips it. Also from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: br_netfilter: do not skip all hooks with 0 priority netfilter: nf_tables: avoid skb access on nf_stolen netfilter: nft_dynset: restore set element counter when failing to update ==================== Link: https://lore.kernel.org/r/Signed-off-by:
-
- 29 Jun, 2022 16 commits
-
-
Michael Walle authored
Don't print a misleading header length mismatch error if the i2c call returns an error. Instead just return the error code without any error message. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Walle authored
There are packets which doesn't have a payload. In that case, the second i2c_master_read() will have a zero length. But because the NFC controller doesn't have any data left, it will NACK the I2C read and -ENXIO will be returned. In case there is no payload, just skip the second i2c master read. Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by:
-
Hangyu Hua authored
Free sk in case tipc_sk_insert() fails. Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by:
-
Krzysztof Kozlowski authored
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Fixes: caf6e49b ("NFC: nfcmrvl: add spi driver") Signed-off-by:
-
YueHaibing authored
As of commit 5801f064 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"), EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. This remove the EXPORT_SYMBOL to fix modpost warning: WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init() The symbol seg6_hmac_net_init is exported and annotated __init Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.comSigned-off-by:
-
katrinzhou authored
When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly. Addresses-Coverity: ("Unused value") Fixes: 300aaeea ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.") Signed-off-by:katrinzhou <katrinzhou@tencent.com> Reviewed-by: Eric Dumazet<edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for 5.19 Several categories of fixes from the mptcp tree: Patches 1-3 are fixes related to MP_FAIL and FASTCLOSE, to make sure MIBs are accurate, and to handle MP_FAIL transmission and responses at the correct times. sk_timer conflicts are also resolved. Patches 4 and 6 handle two separate race conditions, one at socket shutdown and one with unaccepted subflows. Patch 5 makes sure read operations are not blocked during fallback to TCP. Patch 7 improves the diag selftest, which were incorrectly failing on slow machines (like the VMs used for CI testing). Patch 8 avoids possible symbol redefinition errors in the userspace mptcp.h file. Patch 9 fixes a selftest build issue with gcc 12. ==================== Link: https://lore.kernel.org/r/20220628010243.166605-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Mat Martineau authored
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable might be used uninitialized. This is a false positive because the only code path that could lead to uninitialized access is where getaddrinfo() fails, but the local xgetaddrinfo() wrapper exits if such a failure occurs. Initialize the 'sock' variable anyway to allow the tools to build with gcc 12. Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Acked-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Ossama Othman authored
Including <linux/mptcp.h> before the C library <netinet/in.h> header causes symbol redefinition errors at compile-time due to duplicate declarations and definitions in the <linux/in.h> header included by <linux/mptcp.h>. Explicitly include <netinet/in.h> before <linux/in.h> in <linux/mptcp.h> when __KERNEL__ is not defined so that the C library compatibility logic in <linux/libc-compat.h> is enabled when including <linux/mptcp.h> in user space code. Fixes: c11c5906 ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Signed-off-by:
Ossama Othman <ossama.othman@intel.com> Signed-off-by:
-
Paolo Abeni authored
The mentioned test-case still use an hard-coded-len sleep to wait for a relative large number of connection to be established. On very slow VM and with debug build such timeout could be exceeded, causing failures in our CI. Address the issue polling for the expected condition several times, up to an unreasonable high amount of time. On reasonably fast system the self-tests will be faster then before, on very slow one we will still catch the correct condition. Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Signed-off-by:
-
Paolo Abeni authored
When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one. Fixes: 86e39e04 ("mptcp: keep track of local endpoint still available for each msk") Signed-off-by:
-
Paolo Abeni authored
When the MPTCP receive path reach a non fatal fall-back condition, e.g. when the MPC sockets must fall-back to TCP, the existing code is a little self-inconsistent: it reports that new data is available - return true - but sets the MPC flag to the opposite value. As the consequence read operations in some exceptional scenario may block unexpectedly. Address the issue setting the correct MPC read status. Additionally avoid some code duplication in the fatal fall-back scenario. Fixes: 9c81be0d ("mptcp: add MP_FAIL response support") Signed-off-by:
-
Paolo Abeni authored
If the MPTCP socket shutdown happens before a fallback to TCP, and all the pending data have been already spooled, we never close the TCP connection. Address the issue explicitly checking for critical condition at fallback time. Fixes: 1e39e5a3 ("mptcp: infinite mapping sending") Fixes: 0348c690 ("mptcp: add the fallback check") Signed-off-by:
-
Geliang Tang authored
mptcp_mp_fail_no_response shouldn't be invoked on each worker run, it should be invoked only when MP_FAIL response timeout occurs. This patch refactors the MP_FAIL response logic. It leverages the fact that only the MPC/first subflow can gracefully fail to avoid unneeded subflows traversal: the failing subflow can be only msk->first. A new 'fail_tout' field is added to the subflow context to record the MP_FAIL response timeout and use such field to reliably share the timeout timer between the MP_FAIL event and the MPTCP socket close timeout. Finally, a new ack is generated to send out MP_FAIL notification as soon as we hit the relevant condition, instead of waiting a possibly unbound time for the next data packet. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/281 Fixes: d9fb7970 ("mptcp: Do not traverse the subflow connection list without lock") Co-developed-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Paolo Abeni authored
This allow moving a couple of conditional out of the fast path, making the code more easy to follow and will simplify the next patch. Fixes: ae66fb2b ("mptcp: Do TCP fallback on early DSS checksum failure") Signed-off-by:
-
Paolo Abeni authored
The current accounting for MP_FAIL and FASTCLOSE is not very accurate: both can be increased even when the related option is not really sent. Move the accounting into the correct place. Fixes: eb7f3365 ("mptcp: add the mibs for MP_FAIL") Fixes: 1e75629c ("mptcp: add the mibs for MP_FASTCLOSE") Signed-off-by:
-
- 28 Jun, 2022 11 commits
-
-
Eric Dumazet authored
syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
-
Nicolas Dichtel authored
When routes corresponding to addresses are restored by fixup_permanent_addr(), the dst_nopolicy parameter was not set. The typical use case is a user that configures an address on a down interface and then put this interface up. Let's take care of this flag in addrconf_f6i_alloc(), so that every callers benefit ont it. CC: stable@kernel.org CC: David Forster <dforster@brocade.com> Fixes: df789fe7 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reported-by:
Siwar Zitouni <siwar.zitouni@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
-
Oleksij Rempel authored
We should respect link partner capabilities and not force flow control support on every link. Even more, in current state the MAC driver do not advertises pause support so we should not keep flow control enabled at all. Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support") Reported-by:
Anton Lundin <glance@acc.umu.se> Signed-off-by:
-
Oleksij Rempel authored
If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support") Reported-by:
-
Michael Walle authored
Mails to Charles get an auto reply, that he is no longer working at Eff'Innov technologies. Drop the entry and mark the driver as orphaned. Signed-off-by:
-
Shreenidhi Shedi authored
This should be bitwise operator not logical. Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization") Signed-off-by:
Shreenidhi Shedi <sshedi@vmware.com> Link: https://lore.kernel.org/r/20220626132947.3992423-1-sshedi@vmware.comSigned-off-by:
-
Jakub Kicinski authored
Victor Nogueira says: ==================== Notify user space if any actions were flushed before error This patch series fixes the behaviour of actions flush so that the kernel always notifies user space whenever it deletes actions during a flush operation, even if it didn't flush all the actions. This series also introduces tdc tests to verify this new behaviour. ==================== Link: https://lore.kernel.org/r/20220623140742.684043-1-victor@mojatatu.comSigned-off-by:
-
Victor Nogueira authored
Add tdc test cases to verify new flush behaviour is correct, which do the following: - Try to flush only one action which is being referenced by a filter - Try to flush three actions where the last one (index 3) is being referenced by a filter Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Victor Nogueira authored
If during an action flush operation one of the actions is still being referenced, the flush operation is aborted and the kernel returns to user space with an error. However, if the kernel was able to flush, for example, 3 actions and failed on the fourth, the kernel will not notify user space that it deleted 3 actions before failing. This patch fixes that behaviour by notifying user space of how many actions were deleted before flush failed and by setting extack with a message describing what happened. Fixes: 55334a5d ("net_sched: act: refuse to remove bound action outside") Signed-off-by:
-
Tong Zhang authored
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one() we already freed the dma buffer. To fix this issue, reorder function calls like in the .probe function. BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100] Call Trace: epic_rx+0xa6/0x7e0 [epic100] epic_close+0xec/0x2f0 [epic100] unregister_netdev+0x18/0x20 epic_remove_one+0xaa/0xf0 [epic100] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Yilun Wu <yiluwu@cs.stonybrook.edu> Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Reviewed-by:
Francois Romieu <romieu@fr.zoreil.com> Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.comSigned-off-by:
-
Jakub Kicinski authored
While looking at a syzbot report I noticed the NAPI only gets disabled before it's deleted. I think that user can detach the queue before destroying the device and the NAPI will never be stopped. Fixes: 94317099 ("tun: enable NAPI for TUN/TAP driver") Acked-by:
Petar Penkov <ppenkov@aviatrix.com> Link: https://lore.kernel.org/r/20220623042105.2274812-1-kuba@kernel.orgSigned-off-by:
-
- 27 Jun, 2022 4 commits
-
-
Florian Westphal authored
When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing. Unfortunately, bridge filter hooks with priority 0 may be skipped in this case. Example: 1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0. 2. interface is added to the bridge. 3. no tcp packet is ever seen by the bridge prerouting hook. 4. flush the ruleset 5. load the bridge ruleset again. 6. tcp packets are processed as expected. After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet. After 2), hook order is: 0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset The packet is diverted to br_nf_pre_routing. If call-iptables is off, the nftables bridge ruleset is called as expected. But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context. To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0. Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is: 1. br_nf_pre_routing 2. ip(6)tables (if enabled) 3. nftables bridge but after 5 its the much saner: 1. nftables bridge 2. br_nf_pre_routing 3. ip(6)tables (if enabled) Unfortunately I don't see a solution here: It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one. Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag. Reported-by:
Radim Hrazdil <rhrazdil@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN". Reported-by:
-
Pablo Neira Ayuso authored
This patch fixes a race condition. nft_rhash_update() might fail for two reasons: - Element already exists in the hashtable. - Another packet won race to insert an entry in the hashtable. In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter. Fixes: 22fe54d5 ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by:
-
Xin Long authored
Shuang Li reported a NULL pointer dereference crash: [] BUG: kernel NULL pointer dereference, address: 0000000000000068 [] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc] [] Call Trace: [] <IRQ> [] tipc_bcast_rcv+0xa2/0x190 [tipc] [] tipc_node_bc_rcv+0x8b/0x200 [tipc] [] tipc_rcv+0x3af/0x5b0 [tipc] [] tipc_udp_recv+0xc7/0x1e0 [tipc] It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it creates a node in tipc_node_check_dest(), after inserting the new node into hashtable in tipc_node_create(), it creates the bc link. However, there is a gap between this insert and bc link creation, a bc packet may come in and get the node from the hashtable then try to dereference its bc link, which is NULL. This patch is to fix it by moving the bc link creation before inserting into the hashtable. Note that for a preliminary node becoming "real", the bc link creation should also be called before it's rehashed, as we don't create it for preliminary nodes. Fixes: 4cbf8ac2 ("tipc: enable creating a "preliminary" node") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
