- 17 Mar, 2014 22 commits
-
-
Alexander Aring authored
There is no need to lock the clearing of IRQ_TRX_END in status. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Aring authored
This patch fix a unexpected state change for the at86rf231 chip. We can't change into STATE_FORCE_TX_ON while the chip is in one of SLEEP, P_ON, RESET, TRX_OFF, and all *_NOCLK states. In this case we are in the TRX_OFF state. See datasheet [1] page 71 for more information. Without this patch you will get the following message on a at86rf231 device: [ 20.065218] unexpected state change: 8, asked for 4 [ 20.070527] ------------[ cut here ]------------ [ 20.075414] WARNING: CPU: 0 PID: 160 at net/mac802154/ieee802154_dev.c:43 mac802154_slave_open+0x70/0xb8() [ 20.085594] Modules linked in: autofs4 [ 20.089667] CPU: 0 PID: 160 Comm: ifconfig Not tainted 3.14.0-20140108-1-00993-g905c192 #162 [ 20.098612] [<c00127b8>] (unwind_backtrace) from [<c0010b1c>] (show_stack+0x10/0x14) [ 20.106819] [<c0010b1c>] (show_stack) from [<c0033838>] (warn_slowpath_common+0x60/0x80) [ 20.115311] [<c0033838>] (warn_slowpath_common) from [<c00338e8>] (warn_slowpath_null+0x18/0x20) [ 20.124590] [<c00338e8>] (warn_slowpath_null) from [<c057b7e8>] (mac802154_slave_open+0x70/0xb8) [ 20.133880] [<c057b7e8>] (mac802154_slave_open) from [<c0488a58>] (__dev_open+0xa8/0x108) [ 20.142553] [<c0488a58>] (__dev_open) from [<c0488cb0>] (__dev_change_flags+0x8c/0x148) [ 20.151051] [<c0488cb0>] (__dev_change_flags) from [<c0488d84>] (dev_change_flags+0x18/0x48) [ 20.159968] [<c0488d84>] (dev_change_flags) from [<c04e2e9c>] (devinet_ioctl+0x2b0/0x63c) [ 20.168623] [<c04e2e9c>] (devinet_ioctl) from [<c04712e4>] (sock_ioctl+0x23c/0x29c) [ 20.176727] [<c04712e4>] (sock_ioctl) from [<c00e3cb8>] (do_vfs_ioctl+0x4a8/0x578) [ 20.184671] [<c00e3cb8>] (do_vfs_ioctl) from [<c00e3dd4>] (SyS_ioctl+0x4c/0x78) [ 20.192402] [<c00e3dd4>] (SyS_ioctl) from [<c000da00>] (ret_fast_syscall+0x0/0x48) [ 20.200392] ---[ end trace 9a34542f4ea08e47 ]--- This patch was tested on at86rf231 and at86rf212. [1] http://www.atmel.com/images/doc8111.pdfSigned-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== Beautify 'sh_eth' driver's messages This patchset converts te driver to using netdev_*() and netif_*() to print out its messages whenever possible. ==================== Signed-off-by: -
Sergei Shtylyov authored
Now that we call netdev_*() under netif_msg_*() checks, we can fold these into netif_*() macro invocations. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit shorter and at the same time give more information on a device. Suggested-by:
-
Sergei Shtylyov authored
Convert pr_*() to netdev_*() calls as the latter provide info on a device. Suggested-by:
-
Sergei Shtylyov authored
Exit the driver's probe() method when the register layout is unknown as the driver would cause kernel oops in this case anyway. While at it, move the corresponding error message printout and convert it from pr_err() to dev_err(). Suggested-by:
-
David S. Miller authored
Eric W. Biederman says: ==================== netpoll: Cleanup received packet processing This is the long-winded, careful, and polite version of removing the netpoll receive packet processing. First I untangle the code in small steps. Then I modify the code to not force reception and dropping of packets when we are transmiting a packet with netpoll. Finally I move all of the packet reception under CONFIG_NETPOLL_TRAP and delete CONFIG_NETPOLL_TRAP. If someone wants to do a stable backport of these patches, it would require backporting the first 18 patches that handle the budget == 0 in the networking drivers, and the first 6 of these patches. If anyone wants to resurrect netpoll packet reception someday it should just be a matter of reverting the last patch. ==================== Signed-off-by: -
Eric W. Biederman authored
The netpoll packet receive code only becomes active if the netpoll rx_skb_hook is implemented, and there is not a single implementation of the netpoll rx_skb_hook in the kernel. All of the out of tree implementations I have found all call netpoll_poll which was removed from the kernel in 2011, so this change should not add any additional breakage. There are problems with the netpoll packet receive code. __netpoll_rx does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq context. netpoll_neigh_reply leaks every skb it receives. Reception of packets does not work successfully on stacked devices (aka bonding, team, bridge, and vlans). Given that the netpoll packet receive code is buggy, there are no out of tree users that will be merged soon, and the code has not been used for in tree for a decade let's just remove it. Reverting this commit can server as a starting point for anyone who wants to resurrect netpoll packet reception support. Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
Make rx_skb_hook, and rx in struct netpoll depend on CONFIG_NETPOLL_TRAP Make rx_lock, rx_np, and neigh_tx in struct netpoll_info depend on CONFIG_NETPOLL_TRAP Make the functions netpoll_rx_on, netpoll_rx, and netpoll_receive_skb no-ops when CONFIG_NETPOLL_TRAP is not set. Only build netpoll_neigh_reply, checksum_udp service_neigh_queue, pkt_is_ns, and __netpoll_rx when CONFIG_NETPOLL_TRAP is defined. Add helper functions netpoll_trap_setup, netpoll_trap_setup_info, netpoll_trap_cleanup, and netpoll_trap_cleanup_info that initialize and cleanup the struct netpoll and struct netpoll_info receive specific fields when CONFIG_NETPOLL_TRAP is enabled and do nothing otherwise. Signed-off-by:
-
Eric W. Biederman authored
Move the bond slave device neigh_tx handling into service_neigh_queue. In connection with neigh_tx processing remove unnecessary tests of a NULL netpoll_info. As the netpoll_poll_dev has already used and thus verified the existince of the netpoll_info. Signed-off-by:
-
Eric W. Biederman authored
Now that we no longer need to receive packets to safely drain the network drivers receive queue move netpoll_trap and netpoll_set_trap under CONFIG_NETPOLL_TRAP Making netpoll_trap and netpoll_set_trap noop inline functions when CONFIG_NETPOLL_TRAP is not set. Signed-off-by:
-
Eric W. Biederman authored
Change the strategy of netpoll from dropping all packets received during netpoll_poll_dev to calling napi poll with a budget of 0 (to avoid processing drivers rx queue), and to ignore packets received with netif_rx (those will safely be placed on the backlog queue). All of the netpoll supporting drivers have been reviewed to ensure either thay use netif_rx or that a budget of 0 is supported by their napi poll routine and that a budget of 0 will not process the drivers rx queues. Not dropping packets makes NETPOLL_RX_DROP unnecesary so it is removed. npinfo->rx_flags is removed as rx_flags with just the NETPOLL_RX_ENABLED flag becomes just a redundant mirror of list_empty(&npinfo->rx_np). Signed-off-by:
-
Eric W. Biederman authored
Add a helper netpoll_rx_processing that reports when netpoll has receive side processing to perform. Signed-off-by:
-
Eric W. Biederman authored
There is already a warning for this case in the normal netpoll path, but put a copy here in case how netpoll calls the poll functions causes a differenet result. netpoll will shortly call the napi poll routine with a budget 0 to avoid any rx packets being processed. As nothing does that today we may encounter drivers that have problems so a netpoll specific warning seems desirable. Signed-off-by:
-
Eric W. Biederman authored
In poll_napi loop through all of the napi handlers even when the budget falls to 0 to ensure that we process all of the tx_queues, and so that we continue to call into drivers when our initial budget is 0. Signed-off-by:
-
Eric W. Biederman authored
This moves the control logic to the top level in netpoll_poll_dev instead of having it dispersed throughout netpoll_poll_dev, poll_napi and poll_one_napi. Signed-off-by:
-
Eric W. Biederman authored
Today netpoll depends on setting NETPOLL_RX_DROP before networking drivers receive packets in interrupt context so that the packets can be dropped. Move this setting into netpoll_poll_dev from poll_one_napi so that if ndo_poll_controller happens to receive packets we will drop the packets on the floor instead of letting the packets bounce through the networking stack and potentially cause problems. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next, most relevantly they are: * cleanup to remove double semicolon from stephen hemminger. * calm down sparse warning in xt_ipcomp, from Fan Du. * nf_ct_labels support for nf_tables, from Florian Westphal. * new macros to simplify rcu dereferences in the scope of nfnetlink and nf_tables, from Patrick McHardy. * Accept queue and drop (including reason for drop) to verdict parsing in nf_tables, also from Patrick. * Remove unused random seed initialization in nfnetlink_log, from Florian Westphal. * Allow to attach user-specific information to nf_tables rules, useful to attach user comments to rule, from me. * Return errors in ipset according to the manpage documentation, from Jozsef Kadlecsik. * Fix coccinelle warnings related to incorrect bool type usage for ipset, from Fengguang Wu. * Add hash:ip,mark set type to ipset, from Vytas Dauksa. * Fix message for each spotted by ipset for each netns that is created, from Ilia Mirkin. * Add forceadd option to ipset, which evicts a random entry from the set if it becomes full, from Josh Hunt. * Minor IPVS cleanups and fixes from Andi Kleen and Tingwei Liu. * Improve conntrack scalability by removing a central spinlock, original work from Eric Dumazet. Jesper Dangaard Brouer took them over to address remaining issues. Several patches to prepare this change come in first place. * Rework nft_hash to resolve bugs (leaking chain, missing rcu synchronization on element removal, etc. from Patrick McHardy. * Restore context in the rule deletion path, as we now release rule objects synchronously, from Patrick McHardy. This gets back event notification for anonymous sets. * Fix NAT family validation in nft_nat, also from Patrick. * Improve scalability of xt_connlimit by using an array of spinlocks and by introducing a rb-tree of hashtables for faster lookup of accounted objects per network. This patch was preceded by several patches and refactorizations to accomodate this change including the use of kmem_cache, from Florian Westphal. ==================== Signed-off-by: -
Florian Westphal authored
With current match design every invocation of the connlimit_match function means we have to perform (number_of_conntracks % 256) lookups in the conntrack table [ to perform GC/delete stale entries ]. This is also the reason why ____nf_conntrack_find() in perf top has > 20% cpu time per core. This patch changes the storage to rbtree which cuts down the number of ct objects that need testing. When looking up a new tuple, we only test the connections of the host objects we visit while searching for the wanted host/network (or the leaf we need to insert at). The slot count is reduced to 32. Increasing slot count doesn't speed up things much because of rbtree nature. before patch (50kpps rx, 10kpps tx): + 20.95% ksoftirqd/0 [nf_conntrack] [k] ____nf_conntrack_find + 20.50% ksoftirqd/1 [nf_conntrack] [k] ____nf_conntrack_find + 20.27% ksoftirqd/2 [nf_conntrack] [k] ____nf_conntrack_find + 5.76% ksoftirqd/1 [nf_conntrack] [k] hash_conntrack_raw + 5.39% ksoftirqd/2 [nf_conntrack] [k] hash_conntrack_raw + 5.35% ksoftirqd/0 [nf_conntrack] [k] hash_conntrack_raw after (90kpps, 51kpps tx): + 17.24% swapper [nf_conntrack] [k] ____nf_conntrack_find + 6.60% ksoftirqd/2 [nf_conntrack] [k] ____nf_conntrack_find + 2.73% swapper [nf_conntrack] [k] hash_conntrack_raw + 2.36% swapper [xt_connlimit] [k] count_tree Obvious disadvantages to previous version are the increase in code complexity and the increased memory cost. Partially based on Eric Dumazets fq scheduler. Reviewed-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
currently returns 1 if they're the same. Make it work like mem/strcmp so it can be used as rbtree search function. Reviewed-by:
-
Florian Westphal authored
connlimit currently suffers from spinlock contention, example for 4-core system with rps enabled: + 20.84% ksoftirqd/2 [kernel.kallsyms] [k] _raw_spin_lock_bh + 20.76% ksoftirqd/1 [kernel.kallsyms] [k] _raw_spin_lock_bh + 20.42% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock_bh + 6.07% ksoftirqd/2 [nf_conntrack] [k] ____nf_conntrack_find + 6.07% ksoftirqd/1 [nf_conntrack] [k] ____nf_conntrack_find + 5.97% ksoftirqd/0 [nf_conntrack] [k] ____nf_conntrack_find + 2.47% ksoftirqd/2 [nf_conntrack] [k] hash_conntrack_raw + 2.45% ksoftirqd/0 [nf_conntrack] [k] hash_conntrack_raw + 2.44% ksoftirqd/1 [nf_conntrack] [k] hash_conntrack_raw May allow parallel lookup/insert/delete if the entry is hashed to another slot. With patch: + 20.95% ksoftirqd/0 [nf_conntrack] [k] ____nf_conntrack_find + 20.50% ksoftirqd/1 [nf_conntrack] [k] ____nf_conntrack_find + 20.27% ksoftirqd/2 [nf_conntrack] [k] ____nf_conntrack_find + 5.76% ksoftirqd/1 [nf_conntrack] [k] hash_conntrack_raw + 5.39% ksoftirqd/2 [nf_conntrack] [k] hash_conntrack_raw + 5.35% ksoftirqd/0 [nf_conntrack] [k] hash_conntrack_raw + 2.00% ksoftirqd/1 [kernel.kallsyms] [k] __rcu_read_unlock Improved rx processing rate from ~35kpps to ~50 kpps. Reviewed-by:
-
- 15 Mar, 2014 18 commits
-
-
David S. Miller authored
Eric W. Biederman says: ==================== Don't receive packets when the napi budget == 0 After reading through all 120 drivers supporting netpoll I have found 16 more that process at least received packet when the napi budget == 0. Processing more packets than your budget has always been a bug but we haven't cared before so it looks like these drivers slipped through, and need fixes. As netpoll will shortly be using a budget of 0 to get the tx queue processing with the rx queue processing we now care. ==================== Signed-off-by: -
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
Eric W. Biederman authored
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Doorbell drop Avoidance Bug fix for iw_cxgb4 This patch series provides fixes for Chelsio T4/T5 adapters related to DB Drop avoidance and other small fix related to keepalive on iw-cxgb4. The patches series is created against David Miller's 'net-next' tree. And includes patches on cxgb4 and iw_cxgb4 driver. We would like to request this patch series to get merged via David Miller's 'net-next' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
-
