The current title of our section of the documentation is
Linux Networking Documentation. Since we're describing
a section of Linux Documentation repeating those two
words seems redundant.

Link: https://lore.kernel.org/r/20220518234346.2088436-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

GCC 12 seems upset that we check ipa_irq against array bound
but then proceed, anyway:

drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’:
drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds]
  196 |         interrupt->handler[ipa_irq] = handler;
      |         ~~~~~~~~~~~~~~~~~~^~~~~~~~~
drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’
   42 |         ipa_irq_handler_t handler[IPA_IRQ_COUNT];
      |                           ^~~~~~~
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220519004417.2109886-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

GCC 12 warns:

drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress]
  406 |         if (!IPC_CB(skb)) {
      |             ^

Indeed the check seems entirely pointless. Hopefully the other
validation checks will catch if the cb is bad, but it can't be
NULL.
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Martin Blumenstingl says:

====================
lantiq_gswip: Two small fixes

While updating the Lantiq target in OpenWrt to Linux 5.15 I came across
an FDB related error message. While that still needs to be solved I
found two other small issues on the way.

This series fixes the two minor issues found while revisiting the FDB
code in the lantiq_gswip driver:
- The first patch fixes the start index used in gswip_port_fdb() to
  find the entry with the matching bridge. The updated logic is now
  consistent with the rest of the driver.
- The second patch fixes a typo in a dev_err() message.

[0] https://lore.kernel.org/netdev/20220517194015.1081632-1-martin.blumenstingl@googlemail.com/
====================

Link: https://lore.kernel.org/r/20220518220051.1520023-1-martin.blumenstingl@googlemail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

gswip_port_fdb_dump() reads the MAC bridge entries. The error message
should say "failed to read mac bridge entry". While here, also add the
index to the error print so humans can get to the cause of the problem
easier.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The first N entries in priv->vlans are reserved for managing ports which
are not part of a bridge. Use priv->hw_info->max_ports to consistently
access per-bridge entries at index 7. Starting at
priv->hw_info->cpu_port (6) is harmless in this case because
priv->vlan[6].bridge is always NULL so the comparison result is always
false (which results in this entry being skipped).
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

t7xx_request_irq() error: uninitialized symbol 'ret'.

t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'.
If the condition to enter the loop that waits for the handshake event
is false on the first iteration then the uninitialized 'event' will be
dereferenced, fix this by initializing 'event' to NULL.

t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'.
No need to check skb at t7xx_port_proxy_recv_skb() since we know it
is always called with a valid skb by t7xx_cldma_gpd_rx_from_q().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
mtk_eth_soc phylink updates

This series ultimately updates mtk_eth_soc to use phylink_pcs, with some
fixes along the way.

Previous attempts to update this driver (which is now marked as legacy)
have failed due to lack of testing. I am hoping that this time will be
different; Marek can test RGMII modes, but not SGMII. So all that we
know is that this patch series probably doesn't break RGMII.

1) remove unused mac_mode and sgmii flags members from structures.
2) remove unnecessary interpretation of speed when configuring 1000
   and 2500 Base-X
3) move configuration of SGMII duplex setting from mac_config() to
   link_up()
4) only pass in interface mode to mtk_sgmii_setup_mode_force()
5) move decision about which mtk_sgmii_setup_mode_*() function to call
   into mtk_sgmii.c
6) add a fixme comment for RGMII explaning why the call to
   mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be
   addressed by someone who has the hardware and can test an appropriate
   fix. This fixme means that the driver still can't become non-legacy.
7) move gmac setup from mac_config() to mac_finish() - this preserves
   the order that we write to the hardware when we eventually convert to
   phylink_pcs()
8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish()
   for the same reasons as (7).
9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to
   suit conversion to phylink_pcs
10) finally convert to phylink_pcs

As there has been no feedback from mtk_eth_soc maintainers to my RFC
on April 6th, not my reminder on April 11th, so it's now time to merge
this anyway. Mediatek code seems to be submitted to the kernel and
then the maintainers scarper...
====================

Link: https://lore.kernel.org/r/YoUIX+BN/ZbyXzTT@shell.armlinux.org.ukTested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Partially convert mtk_eth_soc to phylink_pcs, moving the configuration,
link up and AN restart over. However, it seems mac_pcs_get_state()
doesn't actually get the state from the PCS, so we can't convert that
over without a better understanding of the hardware.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide a mtk_pcs structure which encapsulates everything that the PCS
functions need (the regmap and ana_rgc3 offset), and use this in the
PCS functions. Provide shim functions to convert from the existing
"mtk_sgmii_*" interface to the converted PCS functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a
disabled state. In order to preserve this when we switch to phylink_pcs
we need to move the restoration of this register to the mac_finish()
callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the setting of the MTK_MAC_MCR register from the end of mac_config
into the phylink mac_finish() method, to keep it as the very last write
that is done during configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a fixme comment for the last remaining incorrect usage of
state->speed in the mac_config() method, which is strangely in a code
path which is only run when the PHY interface mode changes.

This means if we are in RGMII mode, changes in state->speed will not
cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to
be set according to the speed, nor will the TRGPLL clock be set to the
correct value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide mtk_sgmii_config() to wrap up the decisions about which SGMII
configuration will be called.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now that mtk_sgmii_setup_mode_force() only uses the interface mode
from the phylink state, pass just the interface mode into this
function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Phylink does not guarantee that state->duplex will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.

Move the 802.3z PCS duplex configuration to mac_link_up().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Phylink does not guarantee that state->speed will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Moreover, it is making use of it in a function that is only ever called
for 1000BASE-X and 2500BASE-X which operate at a fixed speed which
happens to be the same setting irrespective of the interface mode. We
can simply remove the switch statement and just set the SGMII interface
speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The PCS speed setting is a two bit field, but it is defined as two
separate bits. Add a bitfield mask for the speed definitions, an
 use the FIELD_PREP() macro to define each PCS speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "flags" member of struct mtk_sgmii appears to be unused, as are
the MTK_SGMII_PHYSPEED_* and MTK_HAS_FLAGS() macros. Remove them.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mac->mode is only ever written to in one location, and is thus
superflous. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Artem points out that skb may try to take over the skb and
queue it to its own list. Unlink the skb before calling out.

Fixes: b1a2c178 ("tls: rx: clear ctx->recv_pkt earlier")
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Link: https://lore.kernel.org/r/20220518205644.2059468-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The netif_receive_skb() function frees "skb" so store skb->len before
it is freed.

Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YoUuy4iTjFAcSn03@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Lenovo Thunderbolt 4 Dock, and other Lenovo USB Docks are using the
original Realtek USB ethernet Vendor and Product IDs
If the Network device is Realtek verify that it is on a Lenovo USB hub
before enabling the passthru feature

This also adds in the device IDs for the Lenovo USB Dongle and one other
USB-C dock

V2 fix formating of code
V3 remove Generic define for Device ID 0x8153 and change it to use value
V4 rearrange defines and case statement to put them in better order
v5 create helper function to do the testing work as suggested
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20220517180539.25839-1-dober6023@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.19-20220519' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2022-05-19

Oliver Hartkopp contributes a patch for the ISO-TP CAN protocol to
update the validation of address information during bind.

The next patch is by Jakub Kicinski and converts the CAN network
drivers from netif_napi_add() to the netif_napi_add_weight() function.

Another patch by Oliver Hartkopp removes obsolete CAN specific LED
support.

Vincent Mailhol's patch for the mcp251xfd driver fixes a
-Wunaligned-access warning by clang-14.

* tag 'linux-can-next-for-5.19-20220519' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  can: mcp251xfd: silence clang's -Wunaligned-access warning
  can: can-dev: remove obsolete CAN LED support
  can: can-dev: move to netif_napi_add_weight()
  can: isotp: isotp_bind(): do not validate unused address information
====================

Link: https://lore.kernel.org/r/20220519202308.1435903-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

clang emits a -Wunaligned-access warning on union
mcp251xfd_tx_ojb_load_buf.

The reason is that field hw_tx_obj (not declared as packed) is being
packed right after a 16 bits field inside a packed struct:

| union mcp251xfd_tx_obj_load_buf {
| 	struct __packed {
| 		struct mcp251xfd_buf_cmd cmd;
| 		  /* ^ 16 bits fields */
| 		struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| 		  /* ^ not declared as packed */
| 	} nocrc;
| 	struct __packed {
| 		struct mcp251xfd_buf_cmd_crc cmd;
| 		struct mcp251xfd_hw_tx_obj_raw hw_tx_obj;
| 		__be16 crc;
| 	} crc;
| } ____cacheline_aligned;

Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].

This is a false positive because the field is always being accessed
with the relevant put_unaligned_*() function. Adding __packed to the
structure declaration silences the warning.

[1] https://github.com/llvm/llvm-project/issues/55520

Link: https://lore.kernel.org/all/20220518114357.55452-1-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Since commit 30f3b421 ("can: mark led trigger as broken") the
CAN specific LED support was disabled and marked as BROKEN. As the
common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work
now the code can be removed as preparation for a CAN netdevice Kconfig
rework.

Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.netSuggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
[mkl: remove led.h from MAINTAINERS]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We want to remove the weight argument from the basic version of the
netif_napi_add() call. Move all the callers in drivers/net/can that
pass a custom weight (i.e. not NAPI_POLL_WEIGHT or 64) to the
netif_napi_add_weight() API.

Link: https://lore.kernel.org/all/20220517002345.1812104-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

With commit 2aa39889 ("can: isotp: isotp_bind(): return -EINVAL on
incorrect CAN ID formatting") the bind() syscall returns -EINVAL when
the given CAN ID needed to be sanitized. But in the case of an unconfirmed
broadcast mode the rx CAN ID is not needed and may be uninitialized from
the caller - which is ok.

This patch makes sure the result of an inproper CAN ID format is only
provided when the address information is needed.

Link: https://lore.kernel.org/all/20220517145653.2556-1-socketcan@hartkopp.netSigned-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v5.19

Second set of patches for v5.19 and most likely the last one. rtw89
got support for 8852ce devices and mt76 now supports Wireless Ethernet
Dispatch.

Major changes:

cfg80211/mac80211
 - support disabling EHT mode

rtw89
 - add support for Realtek 8852ce devices

mt76
 - Wireless Ethernet Dispatch support for flow offload
 - non-standard VHT MCS10-11 support
 - mt7921 AP mode support
 - mt7921 ipv6 NS offload support

ath11k
 - enable keepalive during WoWLAN suspend
 - implement remain-on-channel support

* tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (135 commits)
  iwlwifi: mei: fix potential NULL-ptr deref
  iwlwifi: mei: clear the sap data header before sending
  iwlwifi: mvm: remove vif_count
  iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS
  iwlwifi: mvm: add OTP info in case of init failure
  iwlwifi: mvm: fix assert 1F04 upon reconfig
  iwlwifi: fw: init SAR GEO table only if data is present
  iwlwifi: mvm: clean up authorized condition
  iwlwifi: mvm: use NULL instead of ERR_PTR when parsing wowlan status
  iwlwifi: pcie: simplify MSI-X cause mapping
  rtw89: pci: only mask out INT indicator register for disable interrupt v1
  rtw89: convert rtw89_band to nl80211_band precisely
  rtw89: 8852c: update txpwr tables to HALRF_027_00_052
  rtw89: cfo: check mac_id to avoid out-of-bounds
  rtw89: 8852c: set TX antenna path
  rtw89: add ieee80211::sta_rc_update ops
  wireless: Fix Makefile to be in alphabetical order
  mac80211: refactor freeing the next_beacon
  cfg80211: fix kernel-doc for cfg80211_beacon_data
  mac80211: minstrel_ht: support ieee80211_rate_status
  ...
====================

Link: https://lore.kernel.org/r/20220519153334.8D051C385AA@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mellanox/mlx5/core/main.c
  b3388697 ("net/mlx5: Initialize flow steering during driver probe")
  40379a00 ("net/mlx5_fpga: Drop INNOVA TLS support")
  f2b41b32 ("net/mlx5: Remove ipsec_ops function table")
https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/
  16d42d31 ("net/mlx5: Drain fw_reset when removing device")
  8324a02c ("net/mlx5: Add exit route when waiting for FW")
https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/

tools/testing/selftests/net/mptcp/mptcp_join.sh
  e274f715 ("selftests: mptcp: add subflow limits test-cases")
  b6e074e1 ("selftests: mptcp: add infinite map testcase")
  5ac1d2d6 ("selftests: mptcp: Add tests for userspace PM type")
https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/

net/mptcp/options.c
  ba2c89e0 ("mptcp: fix checksum byte order")
  1e39e5a3 ("mptcp: infinite mapping sending")
  ea66758c ("tcp: allow MPTCP to update the announced window")
https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/

net/mptcp/pm.c
  95d68651 ("mptcp: fix subflow accounting on close")
  4d25247d ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/

net/mptcp/subflow.c
  ae66fb2b ("mptcp: Do TCP fallback on early DSS checksum failure")
  0348c690 ("mptcp: add the fallback check")
  f8d4bcac ("mptcp: infinite mapping receiving")
https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, xfrm and netfilter subtrees.

  Notably this reverts a recent TCP/DCCP netns-related change to address
  a possible UaF.

  Current release - regressions:

   - tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"

   - xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
     ifdown

  Previous releases - regressions:

   - netfilter: flowtable: fix TCP flow teardown

   - can: revert "can: m_can: pci: use custom bit timings for Elkhart
     Lake"

   - xfrm: check encryption module availability consistency

   - eth: vmxnet3: fix possible use-after-free bugs in
     vmxnet3_rq_alloc_rx_buf()

   - eth: mlx5: initialize flow steering during driver probe

   - eth: ice: fix crash when writing timestamp on RX rings

  Previous releases - always broken:

   - mptcp: fix checksum byte order

   - eth: lan966x: fix assignment of the MAC address

   - eth: mlx5: remove HW-GRO from reported features

   - eth: ftgmac100: disable hardware checksum on AST2600"

* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
  ptp: ocp: change sysfs attr group handling
  selftests: forwarding: fix missing backslash
  netfilter: nf_tables: disable expression reduction infra
  netfilter: flowtable: move dst_check to packet path
  netfilter: flowtable: fix TCP flow teardown
  net: ftgmac100: Disable hardware checksum on AST2600
  igb: skip phy status check where unavailable
  nfc: pn533: Fix buggy cleanup order
  mptcp: Do TCP fallback on early DSS checksum failure
  mptcp: fix checksum byte order
  net: af_key: check encryption module availability consistency
  net: af_key: add check for pfkey_broadcast in function pfkey_process
  net/mlx5: Drain fw_reset when removing device
  net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
  net/mlx5e: CT: Fix support for GRE tuples
  net/mlx5e: Remove HW-GRO from reported features
  net/mlx5e: Properly block HW GRO when XDP is enabled
  net/mlx5e: Properly block LRO when XDP is enabled
  net/mlx5e: Block rx-gro-hw feature in switchdev mode
  ...

TLS device offload copies sendfile data to a bounce buffer before
transmitting. It allows to maintain the valid MAC on TLS records when
the file contents change and a part of TLS record has to be
retransmitted on TCP level.

In many common use cases (like serving static files over HTTPS) the file
contents are not changed on the fly. In many use cases breaking the
connection is totally acceptable if the file is changed during
transmission, because it would be received corrupted in any case.

This commit allows to optimize performance for such use cases to
providing a new optional mode of TLS sendfile(), in which the extra copy
is skipped. Removing this copy improves performance significantly, as
TLS and TCP sendfile perform the same operations, and the only overhead
is TLS header/trailer insertion.

The new mode can only be enabled with the new socket option named
TLS_TX_ZEROCOPY_SENDFILE on per-socket basis. It preserves backwards
compatibility with existing applications that rely on the copying
behavior.

The new mode is safe, meaning that unsolicited modifications of the file
being sent can't break integrity of the kernel. The worst thing that can
happen is sending a corrupted TLS record, which is in any case not
forbidden when using regular TCP sockets.

Sockets other than TLS device offload are not affected by the new socket
option. The actual status of zerocopy sendfile can be queried with
sock_diag.

Performance numbers in a single-core test with 24 HTTPS streams on
nginx, under 100% CPU load:

* non-zerocopy: 33.6 Gbit/s
* zerocopy: 79.92 Gbit/s

CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
Signed-off-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220518092731.1243494-1-maximmi@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Current implementation of ct merging doesn't support the case
that the fields mangling in pre_ct rules are matched in post_ct
rules.

This change is to support merging when mangling mac address,
ip address, tos, ttl and l4 port. VLAN and MPLS mangling is
not involved yet.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220518075055.130649-1-simon.horman@corigine.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Make ndo_open less sensitive to memory pressure.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220518062007.10056-1-michael@amarulasolutions.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:

       br1
     /    \
    /      \
   /        \
 br0.11    wlan0
   |
   br0
 /  |  \
p1  p2  p3

br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.

A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.

When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().

Fixes: f1c2eddf ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.chSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered.  However, if the group was
never previously registered, then this causes a splat.

Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.

Update the error handling appropriately.

Fixes: c205d53c ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

static inline is needed in the header.

Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode")
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220518183022.2034373-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix missing backslash, introduced in f62c5acc.  Causes all tests to
not be installed.

Fixes: f62c5acc ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same
wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be
EFX_SIENA_CHANNELS_H to avoid build system confusion.

This fixes the following build break:
drivers/net/ethernet/sfc/ptp.c:2191:28:
error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’?
  2191 |  .copy                   = efx_copy_channel,

Fixes: 6e173d3b ("sfc: Copy shared files needed for Siena (part 1)")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Christophe says:

====================
octeon_ep: Fix the error handling path of octep_request_irqs()

I send a small serie to ease review and because I'm sighly
less confident with the 2nd patch.
====================

Link: https://lore.kernel.org/r/cover.1652819974.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>