This flag is a no-op now. Remove usage of the flag.

Cc: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Hou Zhiqiang <B48286@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This flag is a no-op now. Remove usage of the flag.

Cc: Carlo Caione <carlo@caione.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-artpec6:
  clk: add artpec-6 clock controller
  clk: add device tree binding for Artpec-6 clock controller

Add a driver for the main clock controller of the Artpec-6 Soc.
Signed-off-by: Lars Persson <larper@axis.com>
[sboyd@codeaurora.org: Reformatted driver structure and of match]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add device tree documentation for the main clock controller in the
Artpec-6 SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lars Persson <larper@axis.com>
[sboyd@codeaurora.org: Added unit address to binding example]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Commit 7aba4f52 ("clk: ti: dflt: fix enable_reg validity check")
fixed a validation check by using an IS_ERR() macro within the
existing unlikely expression, but IS_ERR() macro already has an
unlikely inside it, so get rid of the redundant unlikely macro
from the validation check.
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk updates from Heiko Stuebner:

This is first big chunk of Rockchip clock-related changes for 4.7.

Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.

The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.

Apart from this big change we have some more fixes and removal
of forgotten variables.

* tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: add clock controller for the RK3399
  dt-bindings: add bindings for rk3399 clock controller
  clk: rockchip: add dt-binding header for rk3399
  clk: rockchip: release io resource when failing to init clk
  clk: rockchip: remove redundant checking of device_node
  clk: rockchip: fix warning reported by kernel-doc
  clk: rockchip: remove mux_core_reg from rockchip_cpuclk_reg_data
  clk: rockchip: add new pll-type for rk3399 and similar socs
  clk: rockchip: Add support for multiple clock providers
  clk: rockchip: allow varying mux parameters for cpuclk pll-sources
  clk: rockchip: add a COMPOSITE_FRACMUX_NOGATE type

Merge branch 'clk-renesas-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull renesas clk driver updates from Geert Uytterhoeven:

  - Support for the PWM module clock and watchdog related clocks on R-Car H3,
  - Cleanups and clarifications.

* 'clk-renesas-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: mstp: Clarify cpg_mstp_{at,de}tach_dev() domain parameter
  clk: renesas: cpg-mssr: Drop check for CONFIG_PM_GENERIC_DOMAINS_OF
  clk: renesas: mstp: Drop check for CONFIG_PM_GENERIC_DOMAINS_OF
  clk: renesas: r8a7795: add RWDT clock
  clk: renesas: r8a7795: add R clk
  clk: renesas: r8a7795: add OSC and RINT clocks
  clk: renesas: cpg-mssr: add generic support for read-only DIV6 clocks
  clk: renesas: r8a7795: make SD clk definition specific for GEN3
  clk: renesas: r8a7795: add PWM clock

Merge tag 'imx-clk-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next

The i.MX clock update for 4.7:
 - Register SAI clk as shared clocks to support SAI audio on i.MX6SX
 - Add the missing ckil clock for i.MX7
 - Update clk-gate2 and vf610 clock driver to prepare for suspend
   support on VF610
 - Fix DCU clock configurations and add TCON ipg clock to support DRM
   display on VF610

* tag 'imx-clk-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: vf610: fix whitespace in vf610-clock.h
  clk: imx: vf610: add TCON ipg clock
  clk: imx: vf610: fix DCU clock tree
  clk: imx: add ckil clock for i.MX7
  clk: imx: vf610: add suspend/resume support
  clk: imx: vf610: add WKPU unit
  clk: imx: vf610: leave DDR clock on
  clk: imx: clk-gate2: allow custom gate configuration
  clk: imx6sx: Register SAI clocks as shared clocks

Pull samsung clk updates from Sylwester Nawrocki:

This includes addition of some missing clock tree definitions
(UART, MMC2 clocks) for exynos3250 SoC and exporting of IDs
for exynos543x SoC AMBA AXI bus clocks needed for bus frequency
scaling.

* tag 'clk-v4.7-samsung' of git://linuxtv.org/snawrocki/samsung:
  clk: samsung: exynos542x: Add the clock id for ACLK
  dt-bindings: clock: Add the clock id for ACLK clock of Exynos542x SoC
  clk: samsung: exynos3250: Add MMC2 clock
  clk: samsung: exynos3250: Add UART2 clock
  dt-bindings: Add the clock id of UART2 and MMC2 for Exynos3250

When changing the clock-rate, currently a new parent is set first and a
divider adapted thereafter. This may result in the clock-rate overflowing
its target rate for a short time if the new parent has a higher rate than
the old parent.

While this often doesn't produce negative effects, it can affect components
in a voltage-scaling environment, like the GPU on the rk3399 socs, where
the voltage than simply is to low for the temporarily to high clock rate.

For general clock hirarchies this may need more extensive adaptions to
the common clock-framework, but at least for composite clocks having
both parent and rate settings it is easy to create a short-term solution to
make sure the clock-rate does not overflow the target.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This patch adds the clock id for ACLK clock which is source clock
of AMBA AXI bus. This clock should be handled in the bus frequency
scaling driver.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

This patch adds the clock id for ACLK clock of Exynos542x SoC.
ACLK clock means the source clock of AMBA AXI bus. This clock
id should be used for Bus frequency scaling.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

There is whitespace in VF610_CLK_OCOTP line.  Fix it.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add the ipg (bus) clock for the TCON modules (Timing Controller). This
module is required by the new DCU DRM driver, since the display signals
pass through TCON.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Similar to an earlier fix for the SAI clocks, the DCU clock hierarchy
mixes the bus clock with the display controllers pixel clock. Tests
have shown that the gates in CCM_CCGR3/9 registers do not control
the DCU pixel clock, but only the register access clock (bus clock).

Fix this by defining the parent clock of VF610_CLK_DCUx to be the bus
clock (ipg_bus).

Since the clock has not been used far, there are no further changes
needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This call matches clocks which have been marked as critical in DT
and sets the appropriate flag.  These flags can then be used to
mark the clock core flags appropriately prior to registration.

Legacy bindings requiring this feature must add the clock-critical
property to their binding descriptions, as it is not a part of
common-clock binding.

Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-4-git-send-email-mturquette@baylibre.com

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-3-git-send-email-mturquette@baylibre.com

Critical clocks are those which must not be gated, else undefined
or catastrophic failure would occur.  Here we have chosen to
ensure the prepare/enable counts are correctly incremented, so as
not to confuse users with enabled clocks with no visible users.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-2-git-send-email-mturquette@baylibre.com

Make it clear that the "domain" parameter of the cpg_mstp_attach_dev()
and cpg_mstp_detach_dev() functions is not used.

The cpg_mstp_attach_dev() and cpg_mstp_detach_dev() callbacks are not
only used by the CPG/MSTP Clock Domain driver, but also by the R-Mobile
SYSC PM Domain driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

As of commit 71d076ce ("ARM: shmobile: Enable PM and
PM_GENERIC_DOMAINS for SoCs with PM Domains"),
CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with a CPG/MSSR
block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

As of commit 71d076ce ("ARM: shmobile: Enable PM and
PM_GENERIC_DOMAINS for SoCs with PM Domains"),
CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with MSTP
clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Add the necessary clock to use the ckil on i.MX7.

Inspired from the following patch:
https://github.com/boundarydevices/linux-imx6/commit/b80e8271Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

R can select between two parents. We deal with it like this: During
initialization, check if EXTALR is populated. If so, use it for R. If
not, use R_Internal. clk_mux doesn't help here because we don't want to
switch parents depending on the clock rate. The clock rate (and source)
should stay constant for the watchdog, so I think a setup like this
during initialization makes sense.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gen3 has two clocks (OSC and R) which look like a DIV6 clock but their
divider value is read-only and depends on MD pins at bootup. Add support
for such clocks by reading the value and adding a fixed clock.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This commit adds the Device Tree binding documentation for the system
controller found in Marvell AP806 HW block, which is one of the core
HW blocks of the 64-bits Marvell Armada 7K/8K family.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The drivers/clk/mvebu directory is only being built when
CONFIG_PLAT_ORION=y. As we are going to support additional mvebu
platforms in drivers/clk/mvebu, which don't have CONFIG_PLAT_ORION=y,
we need to recurse into this directory regardless of the value of
CONFIG_PLAT_ORION.

Since all files in drivers/clk/mvebu/ are already conditionally
compiled depending on various Kconfig options, we can recurse
unconditionally into drivers/clk/mvebu without any other change.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This patch add the MMC2 clocks (mux, divider, gate) of Exynos3250 SoC.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>