- 13 May, 2015 18 commits
-
-
Justin Cormack authored
Fix missing copy_from_user in macvtap SIOCSIFHWADDR ioctl. Signed-off-by:
Justin Cormack <justin@netbsd.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Reported-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
David S. Miller authored
Scott Feldman says: ==================== switchdev: more (minor) cleanups Fix some sparse warnings and include some documentation review comments that didn't get picked up in the switchdev Spring Cleanup series. ==================== Signed-off-by: -
Scott Feldman authored
There were a few review comments on the switchdev.txt documentation that didn't get included with the Spring Cleanup series, so include them now. Signed-off-by:
-
Scott Feldman authored
Signed-off-by:
-
Scott Feldman authored
And let driver convert it to host-byte order as needed. Signed-off-by:
-
Scott Feldman authored
Signed-off-by:
-
Ying Xue authored
As xfrm_output_one() is the only caller of skb_dst_pop(), we should make skb_dst_pop() localized. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Michael Holzheu authored
add an exhaustive set of eBPF tests bringing total to: test_bpf: Summary: 233 PASSED, 0 FAILED, [0/226 JIT'ed] Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Brenden Blanco authored
in-source build of 'make samples/bpf/' was incorrectly using default compiler instead of invoking clang/llvm. out-of-source build was ok. Fixes: a8085782 ("samples: bpf: trivial eBPF program in C") Signed-off-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
-
Hariprasad Shenai authored
Cleanup few MACROS left out in t4_hw.h to be consistent with the existing ones. Also replace few hardcoded values with MACROS. Also update comments for some code Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
KY Srinivasan authored
Based on the information given to this driver (via the xmit_more skb flag), we can defer signaling the host if more packets are on the way. This will help make the host more efficient since it can potentially process a larger batch of packets. Implement this optimization. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Alexei Starovoitov authored
pkt_gen->last_ok was not set properly, so after the first burst pktgen instead of allocating new packet, will reuse old one, advance eth_type_trans further, which would mean the stack will be seeing very short bogus packets. Fixes: 62f64aed ("pktgen: introduce xmit_mode '<start_xmit|netif_receive>'") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: systemport: interrupt coalescing support This patch series adds support for RX & TX interrupt coalescing in the systemport driver. ==================== Signed-off-by: -
Florian Fainelli authored
Similarly to the TX path, allow the RX path to be configured with both 'rx-frames' and 'rx-usecs' coalescing parameters. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Add the ability to configure both 'tx-frames' which controls how many frames are doing to trigger a single interrupt and 'tx-usecs' which dictates how long to wait before an interrupt should be services. Since our timer resolution is close to 8.192 us, we round up to the nearest value the 'tx-usecs' timeout value. Signed-off-by:
-
Denys Vlasenko authored
These functions compile to 60 bytes of machine code each. With this .config: http://busybox.net/~vda/kernel_config there are 617 calls of netif_tx_stop_queue() and 49 calls of netif_tx_stop_all_queues() in vmlinux. To fix this, remove WARN_ON in netif_tx_stop_queue() as suggested by davem, and deinline netif_tx_stop_all_queues(). Change in code size is about 20k: text data bss dec hex filename 82426986 22255416 20627456 125309858 77813a2 vmlinux.before 82406248 22255416 20627456 125289120 777c2a0 vmlinux gcc-4.7.2 still creates deinlined version of netif_tx_stop_queue sometimes: $ nm --size-sort vmlinux | grep netif_tx_stop_queue | wc -l 190 ffffffff81b558a8 <netif_tx_stop_queue>: ffffffff81b558a8: 55 push %rbp ffffffff81b558a9: 48 89 e5 mov %rsp,%rbp ffffffff81b558ac: f0 80 8f e0 01 00 00 lock orb $0x1,0x1e0(%rdi) ffffffff81b558b3: 01 ffffffff81b558b4: 5d pop %rbp ffffffff81b558b5: c3 retq This needs additional fixing. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> CC: Alexei Starovoitov <alexei.starovoitov@gmail.com> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Joe Perches <joe@perches.com> CC: David S. Miller <davem@davemloft.net> CC: Jiri Pirko <jpirko@redhat.com> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: netfilter-devel@vger.kernel.org Acked-by:
-
Justin Cormack authored
The macvtap driver tries to emulate all the ioctls supported by a normal tun/tap driver, however it was missing the generic SIOCGIFHWADDR and SIOCSIFHWADDR ioctls to get and set the mac address that are supported by tun/tap. This patch adds these. Signed-off-by:
-
- 12 May, 2015 22 commits
-
-
David S. Miller authored
Scott Feldman says: ==================== switchdev: spring cleanup v7: Address review comments: - [Jiri] split the br_setlink and br_dellink reverts into their own patches - [Jiri] some parameter cleanup of rocker's memory allocators - [Jiri] pass trans mode as formal parameter rather than hanging off of rocker_port. v6: Address review comments: - [Jiri] split a couple of patches into one-logical-change per patch - [Joe Perches] revert checkpatch -f changes for wrapped lines with long symbols. v5: Address review comments: - [Jiri] include Jiri's s/swdev/switchdev rename patches up front. - [Jiri] squash some patches. Now setlink/dellink/getlink patches are in three parts: new implementation, convert drivers to new, delete old impl. - [Jiri] some minor variable renames - [Jiri] use BUG_ON rather than WARN when COMMIT phase fails when PREPARE phase said it was safe to come into the water. - [Simon] rocker: fix a few transaction prepare-commit cases that were wrong. This was the bulk of the changes in v5. v4: Well, it was a lot of work, but now prepare-commit transaction model is how davem advises: if prepare fails, abort the transaction. The driver must do resource reservations up front in prepare phase and return those resources if aborting. Commit phase would use reserved resources. The good news is the driver code (for rocker) now handles resource allocation failures better by not leaving partially device or driver states. This is a side-effect of the prepare phase where state isn't modified; only validation of inputs and resource reservations happen in the prepare phase. Since we're supporting setting attrs and add objs across lower devs in the stacked case, we need to hold rtnl_lock (or ensure rtnl_lock is held) so lower devs don't move on us during the prepare-commit transaction. DSA driver code skips the prepare phase and goes straight for the commit phase since no up-front allocations are done and no device failures (that could be detected in the prepare phase) can happen. Remove NETIF_F_HW_SWITCH_OFFLOAD from rocker and the swdev_attr_set/get wrappers. DSA doesn't set NETIF_F_HW_SWITCH_OFFLOAD, so it can't be in swdev_attr_set/get. rocker doesn't need it; or rather can't support NETIF_F_HW_SWITCH_OFFLOAD being set/cleared at run-time after the device port is already up and offloading L2/L3. NETIF_F_HW_SWITCH_OFFLOAD is still left as a feature flag for drivers that can use it. Drop the renaming patch for netdev_switch_notifier. Other renames are a result of moving to the attr get/set or obj add/del model. Everything but the netdev_switch_notifier is still prefixed with "swdev_". v3: Move to two-phase prepare-commit transaction model for attr set and obj add. Driver gets a change in prepare phase to NACK transaction if lack of resources or support in device. v2: Address review comments: - [Jiri] squash a few related patches - [Roopa] don't remove NETIF_F_HW_SWITCH_OFFLOAD - [Roopa] address VLAN setlink/dellink - [Ronen] print warning is attr set revert fails Not address: - Using something other than "swdev_" prefix - Vendor extentions The patch set grew a bit to not only support port attr get/set but also add support for port obj add/del. Example of port objs are VLAN, FDB entries, and FIB entries. The VLAN support now allows the swdev driver to get VLAN ranges and flags like PVID and "untagged". Sridhar will be adding FDB obj support in follow-on patch. v1: The main theme of this patch set is to cleanup swdev in preparation for new features or fixes to be added soon. We have a pretty good idea now how to handle stacked drivers in swdev, but there where some loose ends. For example, if a set failed in the middle of walking the lower devs, we would leave the system in an undefined state...there was no way to recover back to the previous state. Speaking of sets, also recognize a pattern that most swdev API accesses are gets or sets of port attributes, so go ahead and make port attr get/set the central swdev API, and convert everything that is set-ish/get-ish to this new API. Features/fixes that should follow from this cleanup: - solve the duplicate pkt forwarding issue - get/set bridge attrs, like ageing_time, from/to device - get/set more bridge port attrs from/to device There are some rename cleanups tagging along at the end, to give swdev consistent naming. And finally, some much needed updates to the switchdev.txt documentation to hopefully capture the state-of-the-art of swdev. Hopefully, we can do a better job keeping this document up-to-date. Tested with rocker, of course, to make sure nothing functional broke. There are a couple minor tweaks to DSA code for getting switch ID and setting STP updates to use new API, but not expecting amy breakage there. ==================== Signed-off-by: -
Scott Feldman authored
Much need updated of switchdev documentation to cover what's been implmented to-date. There are some XXX comments in the text for unimplemented or broken items. I'd like to keep these in there (poor-man's TODO list) and update the document once each issue is resolved. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Scott Feldman authored
Well almost clean: ignore the CHECKs for space after cast operator and some longer-than-80 char cases where for readability it's better to keep as-is. Signed-off-by:
-
Scott Feldman authored
Roopa said remove the feature flag for this series and she'll work on bringing it back if needed at a later date. Signed-off-by:
-
Scott Feldman authored
The IPv4 FIB ops convert nicely to the switchdev objs and we're left with only four switchdev ops: port get/set and port add/del. Other objs will follow, such as FDB. So go ahead and convert IPv4 FIB over to switchdev obj for consistency, anticipating more objs to come. Signed-off-by:
-
Scott Feldman authored
Signed-off-by:
-
Scott Feldman authored
Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and call into port driver to get port attrs. For now, only BR_LEARNING and BR_LEARNING_SYNC are returned. To add more, we'll probably want to break away from ndo_dflt_bridge_getlink() and build the netlink skb directly in the switchdev code. Signed-off-by:
-
Scott Feldman authored
This is revert of: commit 68e331c7 ("bridge: offload bridge port attributes to switch asic if feature flag set") Restore br_dellink back to original and don't call into SELF port driver. rtnetlink.c:bridge_dellink() already does a call into port driver for SELF. bridge vlan add/del cmd defaults to MASTER. From man page for bridge vlan add/del cmd: self the vlan is configured on the specified physical device. Required if the device is the bridge device. master the vlan is configured on the software bridge (default). Signed-off-by:
-
Scott Feldman authored
Now we can remove old wrappers for dellink. Signed-off-by:
-
Scott Feldman authored
Rocker, bonding and team and switch over to the new switchdev_port_bridge_dellink to avoid duplicating code in each driver. Signed-off-by:
-
Scott Feldman authored
Same change as setlink. Provide the wrapper op for SELF ndo_bridge_dellink and call into the switchdev driver to delete afspec VLANs. Signed-off-by:
-
Scott Feldman authored
This is revert of: commit 68e331c7 ("bridge: offload bridge port attributes to switch asic if feature flag set") Restore br_setlink back to original and don't call into SELF port driver. rtnetlink.c:bridge_setlink() already does a call into port driver for SELF. bridge set link cmd defaults to MASTER. From man page for bridge link set cmd: self link setting is configured on specified physical device master link setting is configured on the software bridge (default) The link setting has two values: the device-side value and the software bridge-side value. These are independent and settable using the bridge link set cmd by specifying some combination of [master] | [self]. Furthermore, the device-side and bridge-side settings have their own initial value, viewable from bridge -d link show cmd. Restoring br_setlink back to original makes rocker (the only in-kernel user of SELF link settings) work as first implement: two-sided values. It's true that when both MASTER and SELF are specified from the command, two netlink notifications are generated, one for each side of the settings. The user-space app can distiquish between the two notifications by observing the MASTER or SELF flag. Signed-off-by:
-
Scott Feldman authored
New attr-based bridge_setlink can recurse lower devs and recover on err, so remove old wrapper (including ndo_dflt_switchdev_port_bridge_setlink). Signed-off-by:
-
Scott Feldman authored
Rocker, bonding, and team can now use the switchdev bridge setlink to parse raw netlink; no need to duplicate this code in each driver. Signed-off-by:
-
Scott Feldman authored
Add new switchdev_port_bridge_setlink that can be used by drivers implementing .ndo_bridge_setlink to set switchdev bridge attributes. Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr sets. Proper netlink attr policy checking is done on the protinfo part of the netlink msg. Currently, for protinfo, only bridge port attrs BR_LEARNING and BR_LEARNING_SYNC are parsed and passed to port driver. For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned to SELF. To illustrate with iproute2 cmd, we have: bridge vlan add vid 10 dev sw1p1 self master To add VLAN 10 to port sw1p1 for both the bridge (master) and the device (self). Signed-off-by:
-
Scott Feldman authored
rocker: use switchdev get/set attr for bridge port flags Signed-off-by:
-
Scott Feldman authored
Signed-off-by:
-
Scott Feldman authored
VLAN obj has flags (PVID and untagged) as well as start and end vid ranges. The switchdev driver can optimize programing the device using the ranges. Signed-off-by:
-
Scott Feldman authored
Like switchdev attr get/set, add new switchdev obj add/del. switchdev objs will be things like VLANs or FIB entries, so add/del fits better for objects than get/set used for attributes. Use same two-phase prepare-commit transaction model as in attr set. Signed-off-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by:
-
Scott Feldman authored
STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by:
-
Scott Feldman authored
For rocker, support prepare-commit transaction model for setting attributes (and for adding objects). This requires rocker to preallocate memory needed for the commit up front in the prepare phase. Since rtnl_lock is held between prepare-commit, store the allocated memory on a queue hanging off of the rocker_port. Also, in prepare phase, do everything right up to calling into HW. The same code paths are tranversed in the driver for both prepare and commit phases. In some cases, any state modified in the prepare phase must be reverted before returning so the commit phase makes the same decisions. As a consequence of holding rtnl_lock in process context for all attr sets (and obj adds), all memory is GFP_KERNEL allocated and we don't need to busy spin waiting for the device to complete the command. So the bulk of this patch is simplifying the memory allocations to only use GFP_KERNEL and to remove the nowait flag and busy spin loop. Signed-off-by:
-
Scott Feldman authored
Switch ID is just a gettable port attribute. Convert switchdev op switchdev_parent_id_get to a switchdev attr. Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only port netdevs. So when a port is stacked under bond/bridge, the user can only query switch id via the switch ports, but not via the upper devices Signed-off-by:
-
