This patch fixes checkpatch.pl warnings:

WARNING: Block comments should align the * on each line

WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "DFID" part should be added to the same line as the rest of
the message, to match current coding style.
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes checkpatch.pl warning:
WARNING: line over 80 characters
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch.pl warning:

WARNING: line over 80 characters
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch.pl warning:

WARNING: line over 80 characters
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch.pl warning:

WARNING: line over 80 characters
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes DLUBUF and PLUBUF macro, both of which have no users.
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using 'printk("\n")' is not preferred anymore as
printks without KERN_CONT are emitted on a new line and
KERN_CONT is required to continue lines so use pr_cont.
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes 'use spaces around '|' ' as reported by checkpatch.pl
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl:
        Use BIT(x) instead of using (1<<x)
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix return codes in gdm_lte in gdm724x driver
Signed-off-by: Andrii Vladyka <tulup@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

check for skb->len in gdm_lte_emulate_arp in gdm724x driver
Signed-off-by: Andrii Vladyka <tulup@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This requires adding a pointer to
hold the timer's target URB, as there won't be a way to pass this in the
future.

Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Adrien Descamps <adrien.descamps@gmail.com>
Cc: Thibaut SAUTEREAU <thibaut.sautereau@telecom-sudparis.eu>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Include firmware version in the driver information exported
through ethtool.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Early during probe the netdevice name is not initialized yet,
so use dev_err instead of netdev_err when printing error
messages.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpni_get_irq_status() also looks at the input value of its
status parameter, and if not null it automatically clears
from pending state the bits that are set there.

Use this feature to avoid a separate MC command for clearing
the interrupt event bits after reading the status.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case we fail to allocate a skb for a fragmented ingress
frame, the cleanup function will attempt to unmap again the
first frame fragment, which had already been unmapped during
early Rx processing.

Avoid this by freeing the first buffer immediately in case
we hit an error, leaving the cleanup function to free only
the subsequent buffers.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Take into consideration the return value of napi_complete_done(),
since there might be an indication that it's not suitable to
enable driver interrupts yet.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case dpaa2_io_service_rearm() fails with an error other then
EBUSY, it will do so silently; add a check for this and a warning
message, as a failure here means we're unable to receive any
more traffic on the current cpu.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For scatter-gather ingress frames, we expect to receive
a list of fragments from the hardware, last of which is
marked with a "final" bit.

Add a check to make sure the Rx frame has this bit set
correctly; there's not much we can do in case of a
malformed frame, but at least issue a warning.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On Rx path, if we fail to build an skb from the incoming FD,
we still need to update the channel buffer count accordingly,
otherwise we risk depleting the pool while the software counter
still sees available buffers.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We incorrectly assumed that dpaa2_io_release() can only
return -EBUSY as an error code, when in fact it can also
fail in case some of its arguments don't have valid values.

Make sure we only retry the operation while the portal is
busy and abort for all other error cases, otherwise we risk
entering an endless loop.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The x and y hints receives from the host are unsigned 32 bit integers and
they get set to -1 (0xffffffff) when invalid. Before this commit the
vboxvideo driver was storing them in an u16 causing the -1 to be truncated
to 65535 which, once reported to userspace, was breaking gnome 3.26+
in Wayland mode.

This commit stores the host values in 32 bit variables, removing the
truncation and checks for -1, replacing it with 0 as -1 is not a valid
suggested-offset-property value. Likewise the properties are now
initialized to 0 instead of -1, since -1 is not a valid value.
This fixes gnome 3.26+ in Wayland mode not working with the vboxvideo
driver.
Reported-by: Gianfranco Costamagna <locutusofborg@debian.org>
Cc: stable@vger.kernel.org
Cc: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Shifting and masking strHostIfSetMulti->enabled is redundant since
enabled is a bool and so all the shifted and masked values will be
zero. Replace them with zero to simplify the code.

Detected by CoverityScan, CID#1339458 ("Bad shift operation") and
CID#1339506 ("Operands don't affect result").
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rwlock.h should not be included directly. Instead linux/splinlock.h
should be included. One thing it does is to break the RT build.

Cc: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver may sleep under a spinlock, and the function call path is:
vt6655_suspend (acquire the spinlock)
  pci_set_power_state
    __pci_start_power_transition (drivers/pci/pci.c)
      msleep --> may sleep

To fix it, pci_set_power_state is called without having a spinlock.

This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the radio-bcm2048.c file that fixes up
a warning found by the checkpatch.pl tool.
Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1364489
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As part of removing the timer_list.data field, this converts the wilc1000
driver to using from_timer and an explicit per-timer data field, since
there doesn't appear to be a way to sanely resolve vif from hif_drv.

Cc: Aditya Shankar <aditya.shankar@microchip.com>
Cc: Ganesh Krishna <ganesh.krishna@microchip.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-wireless@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejaswini Poluri <tejaswinipoluri3@gmail.com>
Cc: Scott Matheina <scott@matheina.com>
Cc: Varsha Rao <rvarsha016@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Aleksey Kurbatov <alkbt@yandex.ru>
Cc: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: "Raphaël Beamonte" <raphael.beamonte@gmail.com>
Cc: Jannik Becher <becher.jannik@gmail.com>
Cc: Joseph Wright <rjosephwright@gmail.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Lidza Louina <lidza.louina@gmail.com>
Cc: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: driverdev-devel@linuxdriverproject.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Also removes redundant initialization
of fw transaction timer, which already gets initialized per-transaction.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>