Skip to content

L
linux
Switch branch/tag
  1. 19 Sep, 2016 8 commits
  3. 18 Sep, 2016 12 commits
  5. 17 Sep, 2016 5 commits
  7. 16 Sep, 2016 15 commits
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux · 5fbf3e32
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "Two sets of i915 fixes, one set of vc4 crasher fixes, and a couple of
  atmel fixes.

  Nothing too out there at this stage, though I think some people are
  holidaying so it's been quiet enough"

* tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Ignore OpRegion panel type except on select machines
  Revert "drm/i915/psr: Make idle_frames sensible again"
  drm/i915: Restore lost "Initialized i915" welcome message
  drm/vc4: mark vc4_bo_cache_purge() static
  drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB
  drm/i915: disable 48bit full PPGTT when vGPU is active
  drm/i915: enable vGPU detection for all
  drm/atmel-hlcdc: Make ->reset() implementation static
  drm: atmel-hlcdc: Fix vertical scaling
  drm/vc4: Allow some more signals to be packed with uniform resets.
  drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
      5fbf3e32
    • Linus Torvalds's avatar
      Merge tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 095f5cfa
      Linus Torvalds authored 
      Pull power management fix from Rafael Wysocki:
 "More annotations of tracepoints in the runtime PM framework to prevent
  RCU from complaining when that code is invoked from the idle path
  (Paul McKenney)"

* tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / runtime: Use _rcuidle for runtime suspend tracepoints
      095f5cfa
    • Dave Airlie's avatar
      Merge tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux into drm-fixes · 09cb5b78
      Dave Airlie authored 
      This pull request brings in a fix for crashes in X on VC4.

* tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux:
  drm/vc4: mark vc4_bo_cache_purge() static
  drm/vc4: Allow some more signals to be packed with uniform resets.
      09cb5b78
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel into drm-fixes · 9929c097
      Dave Airlie authored 
      i915 fixes from Jani.

* tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Ignore OpRegion panel type except on select machines
  Revert "drm/i915/psr: Make idle_frames sensible again"
  drm/i915: Restore lost "Initialized i915" welcome message
      9929c097
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · dd5a477c
      Linus Torvalds authored 
      Pull rdma fixes from Doug Ledford:
 "Round three of 4.8 rc fixes.

  This is likely the last rdma pull request this cycle.  The new rxe
  driver had a few issues (you probably saw the boot bot bug report) and
  they should be addressed now.  There are a couple other fixes here,
  mainly mlx4.  There are still two outstanding issues that need
  resolved but I don't think their fix will make this kernel cycle.

  Summary:

   - Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/rdmavt: Don't vfree a kzalloc'ed memory region
  IB/rxe: Fix kmem_cache leak
  IB/rxe: Fix race condition between requester and completer
  IB/rxe: Fix duplicate atomic request handling
  IB/rxe: Fix kernel panic in udp_setup_tunnel
  IB/mlx5: Set source mac address in FTE
  IB/mlx5: Enable MAD_IFC commands for IB ports only
  IB/mlx4: Diagnostic HW counters are not supported in slave mode
  IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV
  IB/mlx4: Fix code indentation in QP1 MAD flow
  IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV
  IB/ipoib: Don't allow MC joins during light MC flush
  IB/rxe: fix GFP_KERNEL in spinlock context
      dd5a477c
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 008f08d6
      Linus Torvalds authored 
      Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bugfixes for v4.8-rc.

  Most of them have actually been around for a while this time but for
  some reason didn't get applied early on.  The shmobile regulator fix
  is the only one that isn't completely obvious.

  Device tree changes:
   - archtimer interrupts must be level triggered (multiple platforms)
   - fix for USB and MMC clocks on STiH410
   - fix split DT repository in case of raspberry-pi 3
   - a new use of skeleton.dtsi on arm64 has crept in after that was
     removed.

  defconfig updates:
   - xilinx vdma has a new Kconfig symbol name
   - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1

  Code fixes:
   - fix regulator quirk on shmobile
   - suspend-to-ram regression on EXYNOS

  Maintainer updates:
   - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: defconfig: Fix USB configuration
  arm64: dts: Fix broken architected timer interrupt trigger
  ARM: multi_v7_defconfig: update XILINX_VDMA
  ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
  ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
  ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
  ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
  ARM: shmobile: fix regulator quirk for Gen2
  ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
  MAINTAINERS: Add myself as reviewer for Samsung Exynos support
      008f08d6
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm · cac4662a
      Linus Torvalds authored 
      Pull ARM fixes from Russell King:
 "Most of this update are fixes primarily discovered from testing on the
  older StrongARM 1110 and PXA systems, as a result of recent interest
  from several people in these platforms:

   - Locomo interrupt handling incorrectly stores the handler data in
     the chip's private data slot: when Locomo is combined with an
     interrupt controller who's chip uses the chip private data, this
     leads to an oops.

   - SA1111 was missing a call to clk_disable() to clean up after a
     failed probe.

   - SA1111 and PCMCIA suspend/resume was broken:

     The PCMCIA "ds" layer was using the legacy bus suspend/resume
     methods, which the core PM code is no longer calling as a result of
     device_pm_check_callbacks() introduced in commit aa8e54b5
     ("PM / sleep: Go direct_complete if driver has no callbacks").

     SA1111 was broken due to changes to PCMCIA which makes PCMCIA
     suspend itself later than the SA1111 code expects, and resume
     before the SA1111 code has initialised access to the pcmcia
     sub-device.

   - the default SA1111 interrupt mask polarity got messed up when it
     was converted to use a dynamic interrupt base number for its
     interrupts.

   - fix platform_get_irq() error code propagation, which was causing
     problems on platforms where the interrupt may not be available at
      probe time in DT setups.

   - fix the lack of clock to PCMCIA code on PXA platforms, which was
     omitted in conversions of PXA to CCF.

   - fix an oops in the PXA PCMCIA code caused by a previous commit not
     realising that Lubbock is different from the rest of the PXA PCMCIA
     drivers.

   - ensure that SA1111 low-level PCMCIA drivers propagate their error
     codes to the main probe function, rather than the driver silently
     accepting a failure.

   - fix the sa11xx debugfs reporting of timing information, which
     always indicated zero due to the clock being a factor of 1000 out.

   - fix the polarity of the status change signal reported from the
     sockets.

  Lastly, one ARM specific commit from Stefan Agner fixing the LPAE
  cache attributes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: pxa/lubbock: add pcmcia clock
  ARM: locomo: fix locomo irq handling
  ARM: 8612/1: LPAE: initialize cache policy correctly
  ARM: sa1111: fix missing clk_disable()
  ARM: sa1111: fix pcmcia suspend/resume
  ARM: sa1111: fix pcmcia interrupt mask polarity
  ARM: sa1111: fix error code propagation in sa1111_probe()
  pcmcia: lubbock: fix sockets configuration
  pcmcia: sa1111: fix propagation of lowlevel board init return code
  pcmcia: soc_common: fix SS_STSCHG polarity
  pcmcia: sa11xx_base: add units to the timing information
  pcmcia: sa11xx_base: fix reporting of timing information
  pcmcia: ds: fix suspend/resume
      cac4662a
    • Colin Ian King's avatar
      IB/rdmavt: Don't vfree a kzalloc'ed memory region · e4618d40
      Colin Ian King authored 
      The userspace memory region 'mr' is allocated with kzalloc in
__rvt_alloc_mr  however it is incorrectly being freed with vfree in
__rvt_free_mr. Fix this by using kfree to free it.
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@mellanox.com>
Acked-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      e4618d40
    • Yonatan Cohen's avatar
      IB/rxe: Fix kmem_cache leak · c1cc72cb
      Yonatan Cohen authored 
      Decrement qp reference when handling error path
in completer to prevent kmem_cache leak.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: default avatarYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      c1cc72cb
    • Yonatan Cohen's avatar
      IB/rxe: Fix race condition between requester and completer · 3050b998
      Yonatan Cohen authored 
      rxe_requester() is sending a pkt with rxe_xmit_packet() and
then calls rxe_update() to update the wqe and qp's psn values.
But sometimes the response is received before the requester
had time to update the wqe in which case the completer
acts on errornous wqe values.
This fix updates the wqe and qp before actually sending
the request and rolls back when xmit fails.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: default avatarYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      3050b998
    • Yonatan Cohen's avatar
      IB/rxe: Fix duplicate atomic request handling · 90894887
      Yonatan Cohen authored 
      When handling ack for atomic opcodes like "fetch&add"
or "cmp&swp", the method send_atomic_ack() saves the ack
before sending it, in case it gets lost and never reach the
requester. In which case the method duplicate_request()
will need to find it using the duplicated request.psn.
But send_atomic_ack() used a wrong psn value and thus
the above ack was never found.
This fix uses the ack.psn to locate the ack in case
its needed.
This fix also copies the ack packet to the skb's control buffer
since duplicate_request() will need it when calling rxe_xmit_packet()

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: default avatarYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      90894887
    • Yonatan Cohen's avatar
      IB/rxe: Fix kernel panic in udp_setup_tunnel · dfdd6158
      Yonatan Cohen authored 
      Disable creation of a UDP socket for ipv6 when
CONFIG_IPV6 is not enabeld. Since udp_sock_create6()
returns 0 when CONFIG_IPV6 is not set

[   46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f
[   46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[   46.893918] Oops: 0002 [#1] PREEMPT
[   46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e7 #1
[   46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000
[   46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0
[   46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f
[   46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0
[   46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0
[   46.919836]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[   46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0
[   46.924550] Stack:
[   46.926014]  cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008
[   46.931274]  00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000
[   46.936122]  cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74
[   46.942350] Call Trace:
[   46.944403]  [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99
[   46.947689]  [<c1fd48de>] ? net_to_rxe+0x4e/0x4e
[   46.950567]  [<c1fd4bdf>] rxe_net_init+0xe/0xa4
[   46.953147]  [<c2c4507b>] rxe_module_init+0x20/0x4c
[   46.955448]  [<c2bf1c74>] do_one_initcall+0x89/0x113
[   46.957797]  [<c2bf15eb>] ? set_debug_rodata+0xf/0xf
[   46.959966]  [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b
[   46.962262]  [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b
[   46.964418]  [<c232eb54>] kernel_init+0x8/0xd0
[   46.966618]  [<c2333122>] ret_from_kernel_thread+0xe/0x24
[   46.969592]  [<c232eb4c>] ? rest_init+0x6f/0x6f

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: default avatarYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      dfdd6158
    • Maor Gottlieb's avatar
      IB/mlx5: Set source mac address in FTE · ee3da804
      Maor Gottlieb authored 
      Set the source mac address in the FTE when L2 specification
is provided.

Fixes: 038d2ef8 ('IB/mlx5: Add flow steering support')
Signed-off-by: default avatarMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      ee3da804
    • Noa Osherovich's avatar
      IB/mlx5: Enable MAD_IFC commands for IB ports only · 7fae6655
      Noa Osherovich authored 
      MAD_IFC command is supported only for physical functions (PF)
and when physical port is IB. The proposed fix enforces it.

Fixes: d603c809 ("IB/mlx5: Fix decision on using MAD_IFC")
Reported-by: default avatarDavid Chang <dchang@suse.com>
Signed-off-by: default avatarNoa Osherovich <noaos@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      7fae6655
    • Kamal Heib's avatar
      IB/mlx4: Diagnostic HW counters are not supported in slave mode · 69d269d3
      Kamal Heib authored 
      Modify the mlx4_ib_diag_counters() to avoid the following error in the
hypervisor when the slave tries to query the hardware counters in SR-IOV
mode.

mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1

Fixes: 3f85f2aa ("IB/mlx4: Add diagnostic hardware counters")
Signed-off-by: default avatarKamal Heib <kamalh@mellanox.com>
Signed-off-by: default avatarLeon Romanovsky <leon@kernel.org>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      69d269d3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7