For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.

So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.

Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().

Here's an example of how to trigger that:

$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard

(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511

$ ps -aux -q 2511
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      2511  0.0  0.0  12892  1008 pts/0    S    12:24   0:00 stat -f
/mnt/test

$ kill -9 2511

(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      2511 83.2  0.0  12892  1008 pts/0    R    12:24  30:01 stat -f
/mnt/test

By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

A "small" CIFS buffer is not big enough in general to hold a
setacl request for SMB2, and we end up overflowing the buffer in
send_set_info(). For instance:

 # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl
 # touch /mnt/test/acltest
 # getcifsacl /mnt/test/acltest
 REVISION:0x1
 CONTROL:0x9004
 OWNER:S-1-5-21-2926364953-924364008-418108241-1000
 GROUP:S-1-22-2-1001
 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
 ACL:S-1-22-2-1001:ALLOWED/0x0/R
 ACL:S-1-22-2-1001:ALLOWED/0x0/R
 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
 ACL:S-1-1-0:ALLOWED/0x0/R
 # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest

this setacl will cause the following KASAN splat:

[  330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs]
[  330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012

[  330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2
[  330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  330.784395] Call Trace:
[  330.784789]  dump_stack+0xc2/0x16b
[  330.786777]  print_address_description+0x6a/0x270
[  330.787520]  kasan_report+0x258/0x380
[  330.788845]  memcpy+0x34/0x50
[  330.789369]  send_set_info+0x4dd/0xc20 [cifs]
[  330.799511]  SMB2_set_acl+0x76/0xa0 [cifs]
[  330.801395]  set_smb2_acl+0x7ac/0xf30 [cifs]
[  330.830888]  cifs_xattr_set+0x963/0xe40 [cifs]
[  330.840367]  __vfs_setxattr+0x84/0xb0
[  330.842060]  __vfs_setxattr_noperm+0xe6/0x370
[  330.843848]  vfs_setxattr+0xc2/0xd0
[  330.845519]  setxattr+0x258/0x320
[  330.859211]  path_setxattr+0x15b/0x1b0
[  330.864392]  __x64_sys_setxattr+0xc0/0x160
[  330.866133]  do_syscall_64+0x14e/0x4b0
[  330.876631]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  330.878503] RIP: 0033:0x7ff2e507db0a
[  330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48
[  330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc
[  330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a
[  330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818
[  330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4
[  330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007
[  330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550

[  330.901057] Allocated by task 1012:
[  330.902888]  kasan_kmalloc+0xa0/0xd0
[  330.904714]  kmem_cache_alloc+0xc8/0x1d0
[  330.906615]  mempool_alloc+0x11e/0x380
[  330.908496]  cifs_small_buf_get+0x35/0x60 [cifs]
[  330.910510]  smb2_plain_req_init+0x4a/0xd60 [cifs]
[  330.912551]  send_set_info+0x198/0xc20 [cifs]
[  330.914535]  SMB2_set_acl+0x76/0xa0 [cifs]
[  330.916465]  set_smb2_acl+0x7ac/0xf30 [cifs]
[  330.918453]  cifs_xattr_set+0x963/0xe40 [cifs]
[  330.920426]  __vfs_setxattr+0x84/0xb0
[  330.922284]  __vfs_setxattr_noperm+0xe6/0x370
[  330.924213]  vfs_setxattr+0xc2/0xd0
[  330.926008]  setxattr+0x258/0x320
[  330.927762]  path_setxattr+0x15b/0x1b0
[  330.929592]  __x64_sys_setxattr+0xc0/0x160
[  330.931459]  do_syscall_64+0x14e/0x4b0
[  330.933314]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  330.936843] Freed by task 0:
[  330.938588] (stack is not available)

[  330.941886] The buggy address belongs to the object at ffff88010d5e2800
 which belongs to the cache cifs_small_rq of size 448
[  330.946362] The buggy address is located 96 bytes inside of
 448-byte region [ffff88010d5e2800, ffff88010d5e29c0)
[  330.950722] The buggy address belongs to the page:
[  330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0
[  330.955665] flags: 0x17ffffc0008100(slab|head)
[  330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80
[  330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
[  330.963005] page dumped because: kasan: bad access detected

[  330.967039] Memory state around the buggy address:
[  330.969255]  ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  330.971833]  ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[  330.976956]                                            ^
[  330.979226]  ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  330.981755]  ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  330.984225] ==================================================================

Fix this by allocating a regular CIFS buffer in
smb2_plain_req_init() if the request command is SMB2_SET_INFO.
Reported-by: Jianhong Yin <jiyin@redhat.com>
Fixes: 366ed846 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

This patch fixes a memory leak when doing a setxattr(2) in SMB2+.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

SMB1 mounting broke in commit 35e2cc1b
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1

Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

Fixes: c713c877 ("cifs: push rfc1002 generation down the stack")

We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.

Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Fixes: c713c877 ("cifs: push rfc1002 generation down the stack")

We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.

Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.

Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.

This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.

Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:

		if (server->large_buf)
			buf = server->bigbuf;

+		usleep_range(500, 4000);

		server->lstrp = jiffies;

To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.

Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull ACPI fixes from Rafael Wysocki:
 "These fix a recent ACPICA regression, fix a battery driver regression
  introduced during the 4.17 cycle and fix up the recently added support
  for the PPTT ACPI table.

  Specifics:

   - Revert part of a recent ACPICA regression fix that added leading
     newlines to ACPICA error messages and made the kernel log look
     broken (Rafael Wysocki).

   - Fix an ACPI battery driver regression introduced during the 4.17
     cycle due to incorrect error handling that made Thinkpad 13 laptops
     crash on boot (Jouke Witteveen).

   - Fix up the recently added PPTT ACPI table support by covering the
     case when a PPTT structure represents a processors group correctly
     (Sudeep Holla)"

* tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Safe unregistering of hooks
  ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
  ACPICA: Drop leading newlines from error messages

Pull power management fixes from Rafael Wysocki:
 "These fix a PCI power management regression introduced during the 4.17
  cycle and fix up the recently added support for devices in multiple
  power domains.

  Specifics:

   - Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3)
     to avoid confusing the platform firmware which started to happen
     after a core power management regression fix that went in during
     the 4.17 cycle (Rafael Wysocki).

   - Fix up the recently added support for devices in multiple power
     domains by avoiding to power up the entire domain unnecessarily
     when attaching a device to it (Ulf Hansson)"

* tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: Don't power on at attach for the multi PM domain case
  PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM

Merge tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of fixes for the RISC-V port:

   - A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows
     modules that use these to load correctly.

   - The removal of of_platform_populate(), which is obselete.

   - The removal of irq-riscv-intc.h, which is obselete.

   - A fix to PTRACE_SETREGSET.

   - Fixes that allow the RV32I kernel to build (at least for Zong, I've
     got another patch on the mailing list that's necessary on my setup :)).

  I've just given these a defconfig build test"

* tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Fix PTRACE_SETREGSET bug.
  RISC-V: Don't include irq-riscv-intc.h
  riscv: remove unnecessary of_platform_populate call
  RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
  RISC-V: Change variable type for 32-bit compatible
  RISC-V: Add definiion of extract symbol's index and type for 32-bit
  RISC-V: Select GENERIC_UCMPDI2 on RV32I
  RISC-V: Add conditional macro for zone of DMA32

Pull m68knommu fix from Greg Ungerer:
 "A single fix for breakage introduced in this merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix "bad page state" oops on ColdFire boot

Merge ACPICA regression fix and a fix for the recently added PPTT
support.

* acpi-tables:
  ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set

* acpica:
  ACPICA: Drop leading newlines from error messages

Merge a PCI power management regression fix.

* pm-pci:
  PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM

These patches for building 32-bit RISC-V kernel.
 - Fix the compile errors and warnings on RV32I.
 - Fix some incompatible problem on RV32I.
 - Add format.h for compatible of print format.

The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.

Change in v1:
 - Fix some error in v1
 - Remove implementation of fixed width integer types format for Elf_Addr.

In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix
gdb segfault.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel.  As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the
address of the symbol (without overflow check), not its contents.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Use generic marco to get the index and type of symbol.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2
symbol.
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

The DMA32 is for 64-bit usage.
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

A hooking API was implemented for 4.17 in fa93854f followed
by hooks for Thinkpad laptops in 2801b968. The Thinkpad
drivers did not support the Thinkpad 13 and the hooking API crashes
on unsupported batteries by altering a list of hooks during unsafe
iteration. Thus, Thinkpad 13 laptops could no longer boot.

Additionally, a lock was kept in place and debugging information was
printed out of order.

Fixes: fa93854f (battery: Add the battery hooking API)
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If struct page is poisoned, and uninitialized access is detected via
PF_POISONED_CHECK(page) dump_page() is called to output the page.  But,
the dump_page() itself accesses struct page to determine how to print
it, and therefore gets into a recursive loop.

For example:

  dump_page()
   __dump_page()
    PageSlab(page)
     PF_POISONED_CHECK(page)
      VM_BUG_ON_PGFLAGS(PagePoisoned(page), page)
       dump_page() recursion loop.

Link: http://lkml.kernel.org/r/20180702180536.2552-1-pasha.tatashin@oracle.com
Fixes: f165b378 ("mm: uninitialized struct page poisoning sanity checking")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ARM trusted foundations code is currently broken in linux-next when
CONFIG_KCOV_INSTRUMENT_ALL is set:

  /tmp/ccHdQsCI.s: Assembler messages:
  /tmp/ccHdQsCI.s:37: Error: .err encountered
  /tmp/ccHdQsCI.s:38: Error: .err encountered
  /tmp/ccHdQsCI.s:39: Error: .err encountered
  scripts/Makefile.build:311: recipe for target 'arch/arm/firmware/trusted_foundations.o' failed

I could not find a function attribute that lets me disable
-fsanitize-coverage=trace-pc for just one function, so this turns it off
for the entire file instead.

Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de
Fixes: 75851720 ("arm: port KCOV to arm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Olof Johansson <olof@lixom.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT)
Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1].  The
operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the
roundup operation can not retrieve the missed one page.  For example:
size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get
shadow_size=0x5000, but actually we need 6 pages.

  shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE);

This can lead to a kernel crash when kasan is enabled and the value of
mod->core_layout.size or mod->init_layout.size is like above.  Because
the shadow memory of X has not been allocated and mapped.

move_module:
  ptr = module_alloc(mod->core_layout.size);
  ...
  memset(ptr, 0, mod->core_layout.size);		//crashed

  Unable to handle kernel paging request at virtual address ffff0fffff97b000
  ......
  Call trace:
    __asan_storeN+0x174/0x1a8
    memset+0x24/0x48
    layout_and_allocate+0xcd8/0x1800
    load_module+0x190/0x23e8
    SyS_finit_module+0x148/0x180

Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Dmitriy Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Libin <huawei.libin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When booting with very large numbers of gigantic (i.e.  1G) pages, the
operations in the loop of gather_bootmem_prealloc, and specifically
prep_compound_gigantic_page, takes a very long time, and can cause a
softlockup if enough pages are requested at boot.

For example booting with 3844 1G pages requires prepping
(set_compound_head, init the count) over 1 billion 4K tail pages, which
takes considerable time.

Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to
prevent this lockup.

Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and
no softlockup is reported, and the hugepages are reported as
successfully setup.

Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.comSigned-off-by: Cannon Matthews <cannonmatthews@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions.  Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.

Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com
Fixes: 369cd212 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My networking merge (commit 4e33d7d4: "Pull networking fixes from
David Miller") got the poll() handling conflict wrong for af_smc.

The conflict between my a11e1d43 ("Revert changes to convert to
->poll_mask() and aio IOCB_CMD_POLL") and Ursula Braun's 24ac3a08
("net/smc: rebuild nonblocking connect") should have left the call to
sock_poll_wait() in place, just without the socket lock release/retake.

And I really should have realized that.  But happily, I at least asked
Ursula to double-check the merge, and she set me right.

This also fixes an incidental whitespace issue nearby that annoyed me
while looking at this.
Pointed-out-by: Ursula Braun <ubraun@linux.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are no legacy behavior in drivers to consider while attaching a
device to genpd - for the multiple PM domain case.

For that reason, let's instead require the driver to runtime resume the
device, via calling pm_runtime_get_sync() for example, when it needs to
power on the corresponding PM domain.

This allows us to improve the situation during attach. Instead of always
power on the PM domain, which may be unnecessary, let's leave it in its
current state. Additionally, to avoid the PM domain to stay powered on,
let's schedule a power off work.

Fixes: 3c095f32 (PM / Domains: Add support for multi PM domains ...)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, we use the ACPI processor ID only for the leaf/processor nodes
as the specification states it must match the value of the ACPI processor
ID field in the processor’s entry in the MADT.

However, if a PPTT structure represents a processors group, it
matches a processor container UID in the namespace and the
ACPI_PPTT_ACPI_PROCESSOR_ID_VALID flag indicates whether the
ACPI processor ID is valid.

Let's use UID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set to be
consistent instead of using table offset as it's currently done for
non-leaf nodes.

Fixes: 2bd00bcd (ACPI/PPTT: Add Processor Properties Topology Table parsing)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jeremy Linton <jeremy.linton@arm.com>
[ rjw: Changelog (minor) ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull MD fixes from Shaohua Li:
 "Two small fixes for MD:

   - an error handling fix from me

   - a recover bug fix for raid10 from BingJing"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid10: fix that replacement cannot complete recovery after reassemble
  MD: cleanup resources in failure

Pull OpenRISC fixes from Stafford Horne:
 "Two fixes for issues which were breaking OpenRISC boot:

   - Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's
     page table flag addition.

   - Fix issue booting on real hardware if delay slot detection
     emulation is disabled"

* tag 'for-linus' of git://github.com/stffrdhrn/linux:
  openrisc: entry: Fix delay slot exception detection
  openrisc: Call destructor during __pte_free_tlb

Pull networking fixes from David Miller:

 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.

 2) Need to bump memory lock rlimit for test_sockmap bpf test, from
    Yonghong Song.

 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.

 4) Fix uninitialized read in nf_log, from Jann Horn.

 5) Fix raw command length parsing in mlx5, from Alex Vesker.

 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
    Varadhan.

 7) Fix regressions in FIB rule matching during create, from Jason A.
    Donenfeld and Roopa Prabhu.

 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.

 9) More bpfilter build fixes/adjustments from Masahiro Yamada.

10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
    Dangaard Brouer.

11) fib_tests.sh file permissions were broken, from Shuah Khan.

12) Make sure BH/preemption is disabled in data path of mac80211, from
    Denis Kenzior.

13) Don't ignore nla_parse_nested() return values in nl80211, from
    Johannes berg.

14) Properly account sock objects ot kmemcg, from Shakeel Butt.

15) Adjustments to setting bpf program permissions to read-only, from
    Daniel Borkmann.

16) TCP Fast Open key endianness was broken, it always took on the host
    endiannness. Whoops. Explicitly make it little endian. From Yuching
    Cheng.

17) Fix prefix route setting for link local addresses in ipv6, from
    David Ahern.

18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.

19) Various bpf sockmap fixes, from John Fastabend.

20) Use after free for GRO with ESP, from Sabrina Dubroca.

21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
    Eric Biggers.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  qede: Adverstise software timestamp caps when PHC is not available.
  qed: Fix use of incorrect size in memcpy call.
  qed: Fix setting of incorrect eswitch mode.
  qed: Limit msix vectors in kdump kernel to the minimum required count.
  ipvlan: call dev_change_flags when ipvlan mode is reset
  ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
  net: fix use-after-free in GRO with ESP
  tcp: prevent bogus FRTO undos with non-SACK flows
  bpf: sockhash, add release routine
  bpf: sockhash fix omitted bucket lock in sock_close
  bpf: sockmap, fix smap_list_map_remove when psock is in many maps
  bpf: sockmap, fix crash when ipv6 sock is added
  net: fib_rules: bring back rule_exists to match rule during add
  hv_netvsc: split sub-channel setup into async and sync
  net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
  atm: zatm: Fix potential Spectre v1
  s390/qeth: consistently re-enable device features
  s390/qeth: don't clobber buffer on async TX completion
  s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
  s390/qeth: fix race when setting MAC address
  ...

Sudarsana Reddy Kalluru says:

====================
qed*: Fix series.

The patch series addresses few issues in the qed* drivers.

Please consider applying it to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode),
get-tsinfo() callback should return the software timestamp capabilities
instead of returning the error.

Fixes: 4c55215c ("qede: Add driver support for PTP")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct size value while copying chassis/port id values.

Fixes: 6ad8c632 ("qed: Add support for query/config dcbx.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By default, driver sets the eswitch mode incorrectly as VEB (virtual
Ethernet bridging).
Need to set VEB eswitch mode only when sriov is enabled, and it should be
to set NONE by default. The patch incorporates this change.

Fixes: 0fefbfba ("qed*: Management firmware - notifications and defaults")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Memory size is limited in the kdump kernel environment. Allocation of more
msix-vectors (or queues) consumes few tens of MBs of memory, which might
lead to the kdump kernel failure.
This patch adds changes to limit the number of MSI-X vectors in kdump
kernel to minimum required value (i.e., 2 per engine).

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After we change the ipvlan mode from l3 to l2, or vice versa, we only
reset IFF_NOARP flag, but don't flush the ARP table cache, which will
cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2().
Then the message will not come out of host.

Here is the reproducer on local host:

ip link set eth1 up
ip addr add 192.168.1.1/24 dev eth1
ip link add link eth1 ipvlan1 type ipvlan mode l3

ip netns add net1
ip link set ipvlan1 netns net1
ip netns exec net1 ip link set ipvlan1 up
ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1

ip route add 192.168.2.0/24 via 192.168.1.2
ping 192.168.2.2 -c 2

ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2
ping 192.168.2.2 -c 2

Add the same configuration on remote host. After we set the mode to l2,
we could find that the src/dst MAC addresses are the same on eth1:

21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84)
    192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64

Fix this by calling dev_change_flags(), which will call netdevice notifier
with flag change info.

v2:
a) As pointed out by Wang Cong, check return value for dev_change_flags() when
change dev flags.
b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops.
So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>