- 22 Jan, 2015 17 commits
-
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
It's about to not be valid for objects that aren't in the client object tree. Signed-off-by: -
Ben Skeggs authored
These are a tad more complex than a direct cast with paranoia safeties. Signed-off-by: -
Ben Skeggs authored
The [ SUBDEV] specified in log output will be a bit different for children of a subdev now. Previously this reports whatever subdev is specified by object.engine, now it reports the subdev that owns the object (so, up object.parent somewhere). Later patches will append object and class identifiers to messages, which will help clarify where it's coming from. Signed-off-by: -
Ben Skeggs authored
Makes the output slightly less useful, in that objects with the same class handle can't be distinguished from each other now. Upcoming commits will name objects with user-readable strings to fix this problem. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
gpuobj has a condition of (bar && bar->alloc) around usage to avoid some nasty ordering issues (which, i've now been reminded to add a todo about fixing...) between bar and vm. The bar->alloc part of the condition isn't currently necessary (it used to be, another change made bar always NULL where it matters), so we got lucky. That won't be the case for much longer. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Makes things a bit more readable. This is specially important now as upcoming commits are going to be gradually removing the use of macros for down-casts, in favour of compile-time checking. Signed-off-by: -
Ben Skeggs authored
Has additional safeties for one. For two, needed for an upcoming commit that removes abuse of nouveau_object.engine. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Dave Airlie authored
Backmerge Linus tree after rc5 + drm-fixes went in. There were a few amdkfd conflicts I wanted to avoid, and Ben requested this for nouveau also. Conflicts: drivers/gpu/drm/amd/amdkfd/Makefile drivers/gpu/drm/amd/amdkfd/kfd_chardev.c drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c drivers/gpu/drm/amd/amdkfd/kfd_priv.h drivers/gpu/drm/amd/include/kgd_kfd_interface.h drivers/gpu/drm/i915/intel_runtime_pm.c drivers/gpu/drm/radeon/radeon_kfd.c
-
- 21 Jan, 2015 15 commits
-
-
Dave Airlie authored
Merge branch 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next This patch enable the last big hardware feature of my driver: the connector for panel. Like for HMDI and HDA, Digital Video Out (DVO) create brige, encoder and connector drm objects. * 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: add DVO output connector
-
https://github.com/bbrezillon/linux-at91Dave Airlie authored
Add atmel HLCDC driver. * tag 'atmel-hlcdc-drm-3.20' of https://github.com/bbrezillon/linux-at91: drm: add DT bindings documentation for atmel-hlcdc-dc driver drm: add Atmel HLCDC Display Controller support drm: panel: simple-panel: add bus format information for foxlink panel drm: panel: simple-panel: add support for bus_format retrieval drm: add bus_formats and num_bus_formats fields to drm_display_info
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Infrastructure work in amdkfd to prepare for VI support. This work mainly includes separating modules into ASIC-specific functionality, adding new properties that are relevant for VI, making sure that shared code is reused, etc. - Improve mechanism of submitting packets to HIQ (the kernel queue that amdkfd uses to issue commands to the GPU). The driver used to verify that each CS was read by the GPU. However, this proved to be both unnecessary and erroneous. Therefore, we cancelled this verification. - Moved initialization of compute VMIDs into radeon driver - Various minor fixes * tag 'drm-amdkfd-next-2015-01-21' of git://people.freedesktop.org/~gabbayo/linux: (22 commits) drm/amdkfd: Fix description of sched_policy module parameter drm/amdkfd: Remove sync_with_hw() from amdkfd drm/amdkfd: Remove unused function busy_wait() drm/amdkfd: Replace cpu_relax() with schedule() in DQM drm/amdkfd: Fix for-loop when allocating HQD (non-HWS) drm/amdkfd: Add initial VI support for KQ drm/amdkfd: Encapsulate KQ functions in ops structure drm/amdkfd: Add initial VI support for DQM drm/amdkfd: Encapsulate DQM functions in ops structure drm/amdkfd: Don't BUG on freeing GART sub-allocation drm/amdkfd: Fix logic of destroy_queue_nocpsch() MAINTAINERS: Update amdkfd files drm/amdkfd: Change MQD manager to be H/W specific drm/amdkfd: Add asic property to kfd_device_info drm/amdkfd: Make KFD_MQD_TYPE enum types H/W agnostic drm/amdkfd: Add new VI-specific queue properties drm/radeon: Use new cik_structs.h file drm/amdkfd: Don't include header files from radeon drm/amd: Put cik structures in a common place drm/radeon: Don't use relative paths in #include ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull superh tracing fix from Steven Rostedt: "It's been reported that function tracing does not work on the sh architecture because gcc 4.8 for superH does not support -m32, and the recordmcount.pl script adds "-m32" when re-compiling the object files with the mcount locations. I was not able to reproduce this problem, as it seems that -m32 works fine for my cross compiler gcc 4.6.3, but I have to assume that -m32 was deprecated somewhere between 4.6 and 4.8. As it still seems to compile fine without -m32, I have no reason not to add this patch, as having -m32 seems to cause trouble for others" * tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
-
Boris Brezillon authored
The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display controller device. The HLCDC block provides a single RGB output port, and only supports LCD panels connection to LCD panels for now. The atmel,panel property link the HLCDC RGB output with the LCD panel connected on this port (note that the HLCDC RGB connector implementation makes use of the DRM panel framework). Connection to other external devices (DRM bridges) might be added later by mean of a new atmel,xxx (atmel,bridge) property. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Boris Brezillon authored
The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display controller device. This display controller supports at least one primary plane and might provide several overlays and an hardware cursor depending on the IP version. At the moment, this driver only implements an RGB connector to interface with LCD panels, but support for other kind of external devices might be added later. Signed-off-by:
Rob Clark <robdclark@gmail.com> Tested-by:
Anthony Harivel <anthony.harivel@emtrion.de> Tested-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
-
Boris Brezillon authored
Foxlink's fl500wvr00-a0t supports RGB888 format. Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Boris Brezillon authored
Provide a way to specify panel requirement in terms of supported media bus format (particularly useful for panels connected to an RGB or LVDS bus). Signed-off-by:
-
Boris Brezillon authored
Add bus_formats and num_bus_formats fields and drm_display_info_set_bus_formats helper function to specify the bus formats supported by a given display. This information can be used by display controller drivers to configure the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw RGB or LVDS busses). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This batch contains two fixes for FireWire lib module and a quirk for yet another Logitech WebCam. The former is the fixes for MIDI handling I forgot to pick up during the merge window. All the fixed code is pretty local and shouldn't give any regressions" * tag 'sound-3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210 ALSA: firewire-lib: limit the MIDI data rate ALSA: firewire-lib: remove rx_blocks_for_midi quirk
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Just back from LCA + some days off, had some fixes from the past 2 weeks, Some amdkfd code removal for a feature that wasn't ready, otherwise just one fix for core helper sleeping, exynos, i915, and radeon fixes. I thought I had some sti fixes but they were already in, and it confused me for a few mins this morning" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fb helper should avoid sleeping in panic context drm/exynos: fix warning of vblank reference count drm/exynos: remove unnecessary runtime pm operations drm/exynos: fix reset codes for memory mapped hdmi phy drm/radeon: use rv515_ring_start on r5xx drm/radeon: add si dpm quirk list drm/radeon: don't print error on -ERESTARTSYS drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES drm/i915: Ban Haswell from using RCS flips drm/i915: vlv: sanitize RPS interrupt mask during GPU idling drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6 drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT drm/exynos: remove the redundant machine checking code drm/radeon: add a dpm quirk list drm/amdkfd: Fix sparse warning (different address space) drm/radeon: fix VM flush on CIK (v3) drm/radeon: fix VM flush on SI (v3) drm/radeon: fix VM flush on cayman/aruba (v3) drm/amdkfd: Drop interrupt SW ring buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fixes from Lee Jones: - Avoid platform ID collision in da9052 - Skip caching volatile registers in tps65218 - Use correct address base in tps65218 - Repair deadlock on suspend in rtsx_usb * tag 'mfd-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: rtsx_usb: Fix runtime PM deadlock mfd: tps65218: Make INT1 our status_base register mfd: tps65218: Make INT[12] and STATUS registers volatile mfd: da9052-core: Fix platform-device id collision
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup - Implement mode_fixup for a DI vertical timing limitation - Use generic DRM OF helpers in DRM core - Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip driver - Add DC use counter to fix multi-display support - Simplify handling of DI clock flags - A few small fixes and cleanup * tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits) imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set() gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg imx-drm: encoder prepare/mode_set must use adjusted mode imx-drm: ipuv3-crtc: Implement mode_fixup drm_modes: add drm_display_mode_to_videomode gpu: ipu-di: remove some non-functional code gpu: ipu-di: Add ipu_di_adjust_videomode() drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver drm: bridge/dw_hdmi: request interrupt only after initializing the mutes drm: bridge/dw_hdmi: add rockchip rk3288 support dt-bindings: Add documentation for rockchip dw hdmi drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done drm: bridge/dw_hdmi: add mode_valid support drm: bridge/dw_hdmi: add support for multi-byte register width access dt-bindings: add document for dw_hdmi drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi drm: imx: imx-hdmi: split phy configuration to platform driver drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode ...
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: drm: rcar-du: Implement support for interlaced modes drm: rcar-du: Clamp DPMS states to on and off drm: rcar-du: Enable hotplug detection on HDMI connector drm: rcar-du: Output HSYNC instead of CSYNC drm: rcar-du: Add support for external pixel clock drm: rcar-du: Refactor DEFR8 feature drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction drm: rcar-du: Configure pitch for chroma plane of multiplanar formats drm: rcar-du: Don't fail probe in case of partial encoder init error drm: adv7511: Remove interlaced mode check
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Add support for SDMA usermode queues - Replace logic of sub-allocating from GART buffer in amdkfd. Instead of using radeon_sa module, use a new module that is more suited for this purpose - Add the number of watch points to amdkfd topology - Split a function that did two things into two seperate functions. * tag 'drm-amdkfd-next-2015-01-09' of git://people.freedesktop.org/~gabbayo/linux: drm/amd: Remove old radeon_sa funcs from kfd-->kgd interface drm/radeon: Remove old radeon_sa usage from kfd-->kgd interface drm/amdkfd: Using new gtt sa in amdkfd drm/amdkfd: Allocate gart memory using new interface drm/amdkfd: Fixed calculation of gart buffer size drm/amdkfd: Add kfd gtt sub-allocator functions drm/amdkfd: Add gtt sa related data to kfd_dev struct drm/radeon: Impl. new gtt allocate/free functions drm/amd: Add new kfd-->kgd interface for gart usage drm/radeon: Enable sdma preemption drm/amdkfd: Pass queue type to pqm_create_queue() drm/amdkfd: Identify SDMA queue in create queue ioctl drm/amdkfd: Add SDMA user-mode queues support to QCM drm/amdkfd: Add SDMA mqd support drm/radeon: Implement SDMA interface functions drm/amd: Add SDMA functions to kfd-->kgd interface drm/amdkfd: Process-device data creation and lookup split drm/amdkfd: Add number of watch points to topology
-
- 20 Jan, 2015 8 commits
-
-
Dave Airlie authored
Merge tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Remove the interrupt SW ring buffer impl. as it is not used by any module in amdkfd. - Fix a sparse warning * tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Fix sparse warning (different address space) drm/amdkfd: Drop interrupt SW ring buffer
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
misc i915 fixes * tag 'drm-intel-fixes-2015-01-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES drm/i915: Ban Haswell from using RCS flips drm/i915: vlv: sanitize RPS interrupt mask during GPU idling drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6 drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
-
Rui Wang authored
There are still some places in the fb helper that need to avoid sleeping in panic context. Here's an example: [ 65.615496] bad: scheduling from the idle thread! [ 65.620747] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G M E 3.18.0-rc4-7-default+ #20 [ 65.630364] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRHSXSD1.86B.0056.R01.1409242327 09/24/2014 [ 65.641923] ffff88087f693d80 ffff88087f689878 ffffffff81566db9 0000000000000000 [ 65.650226] ffff88087f693d80 ffff88087f689898 ffffffff810871ff ffff88046eb3e0d0 [ 65.658527] ffff88087f693d80 ffff88087f6898c8 ffffffff8107c1fa 000000017f6898b8 [ 65.666830] Call Trace: [ 65.669557] <#MC> [<ffffffff81566db9>] dump_stack+0x46/0x58 [ 65.675994] [<ffffffff810871ff>] dequeue_task_idle+0x2f/0x40 [ 65.682412] [<ffffffff8107c1fa>] dequeue_task+0x5a/0x80 [ 65.688345] [<ffffffff810804f3>] deactivate_task+0x23/0x30 [ 65.694569] [<ffffffff81569050>] __schedule+0x580/0x7f0 [ 65.700502] [<ffffffff81569739>] schedule_preempt_disabled+0x29/0x70 [ 65.707696] [<ffffffff8156abb6>] __ww_mutex_lock_slowpath+0xb8/0x162 [ 65.714891] [<ffffffff8156acb3>] __ww_mutex_lock+0x53/0x85 [ 65.721125] [<ffffffffa00b3a5d>] drm_modeset_lock+0x3d/0x110 [drm] [ 65.728132] [<ffffffffa00b3c2a>] __drm_modeset_lock_all+0x8a/0x120 [drm] [ 65.735721] [<ffffffffa00b3cd0>] drm_modeset_lock_all+0x10/0x30 [drm] [ 65.743015] [<ffffffffa01af8bf>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper] [ 65.751857] [<ffffffff8132bd21>] fb_pan_display+0xd1/0x1a0 [ 65.758081] [<ffffffff81326010>] bit_update_start+0x20/0x50 [ 65.764400] [<ffffffff813259f2>] fbcon_switch+0x3a2/0x550 [ 65.770528] [<ffffffff813a01c9>] redraw_screen+0x189/0x240 [ 65.776750] [<ffffffff81322f8a>] fbcon_blank+0x20a/0x2d0 [ 65.782778] [<ffffffff8137d359>] ? erst_writer+0x209/0x330 [ 65.789002] [<ffffffff810ba2f3>] ? internal_add_timer+0x63/0x80 [ 65.795710] [<ffffffff810bc137>] ? mod_timer+0x127/0x1e0 [ 65.801740] [<ffffffff813a0cd8>] do_unblank_screen+0xa8/0x1d0 [ 65.808255] [<ffffffff813a0e10>] unblank_screen+0x10/0x20 [ 65.814381] [<ffffffff812ca0d9>] bust_spinlocks+0x19/0x40 [ 65.820508] [<ffffffff81561ca7>] panic+0x106/0x1f5 [ 65.825955] [<ffffffff8102336c>] mce_panic+0x2ac/0x2e0 [ 65.831789] [<ffffffff812c796a>] ? delay_tsc+0x4a/0x80 [ 65.837625] [<ffffffff81024e1f>] do_machine_check+0xbaf/0xbf0 [ 65.844138] [<ffffffff813365d7>] ? intel_idle+0xc7/0x150 [ 65.850166] [<ffffffff8156f03f>] machine_check+0x1f/0x30 [ 65.856195] [<ffffffff813365d7>] ? intel_idle+0xc7/0x150 [ 65.862222] <<EOE>> [<ffffffff814283d5>] cpuidle_enter_state+0x55/0x170 [ 65.869823] [<ffffffff814285a7>] cpuidle_enter+0x17/0x20 [ 65.875852] [<ffffffff81097b08>] cpu_startup_entry+0x2d8/0x370 [ 65.882467] [<ffffffff8102fe29>] start_secondary+0x159/0x180 There's __drm_modeset_lock_all() which Daniel Vetter introduced for this purpose. We can leverage that without reinventing anything. This patch works with the latest kernel. Reviewed-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull request includes below fixups, - Remove duplicated machine checking. . It seems that this code was added when you merged 'v3.18-rc7' into drm-next. commit id : e8115e79 - Fix hdmiphy reset. . Exynos hdmi has two interfaces to control hdmyphy, one is I2C, other is APB bus - memory mapped I/O. So this patch makes hdmiphy reset to be done according to interfaces, I2C or APB bus. - And add some exception codes. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix warning of vblank reference count drm/exynos: remove unnecessary runtime pm operations drm/exynos: fix reset codes for memory mapped hdmi phy drm/exynos: remove the redundant machine checking code
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Some radeon fixes for 3.19: - GPUVM stability fixes - SI dpm quirks - Regression fixes * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: use rv515_ring_start on r5xx drm/radeon: add si dpm quirk list drm/radeon: don't print error on -ERESTARTSYS drm/radeon: add a dpm quirk list drm/radeon: fix VM flush on CIK (v3) drm/radeon: fix VM flush on SI (v3) drm/radeon: fix VM flush on cayman/aruba (v3) -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: - Bartlomiej will be co-maintaining PATA portion of libata. git workflow will stay the same. - sata_sil24 wasn't happy with tag ordered submission. An option to restore the old tag allocation behavior is implemented for sil24. - a very old race condition in PIO host state machine which can trigger BUG fixed. - other driver-specific changes * 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: prevent HSM state change race between ISR and PIO libata: allow sata_sil24 to opt-out of tag ordered submission ata: pata_at91: depend on !ARCH_MULTIPLATFORM ahci: Remove Device ID for Intel Sunrise Point PCH ahci: Use dev_info() to inform about the lack of Device Sleep support libata: Whitelist SSDs that are known to properly return zeroes after TRIM sata_dwc_460ex: fix resource leak on error path ata: add MAINTAINERS entry for libata PATA drivers libata: clean up MAINTAINERS entries libata: export ata_get_cmd_descript() ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command. ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "The xfs folks have been running into weird and very rare lockups for some time now. I didn't think this could have been from workqueue side because no one else was reporting it. This time, Eric had a kdump which we looked into and it turned out this actually was a workqueue bug and the bug has been there since the beginning of concurrency managed workqueue. A worker pool ensures forward progress of the workqueues associated with it by always having at least one worker reserved from executing work items. When the pool is under contention, the idle one tries to create more workers for the pool and if that doesn't succeed quickly enough, it calls the rescuers to the pool. This logic had a subtle race condition in an early exit path. When a worker invokes this manager function, the function may return %false indicating that the caller may proceed to executing work items either because another worker is already performing the role or conditions have changed and the pool is no longer under contention. The latter part depended on the assumption that whether more workers are necessary or not remains stable while the pool is locked; however, pool->nr_running (concurrency count) may change asynchronously and it getting bumped from zero asynchronously could send off the last idle worker to execute work items. The race window is fairly narrow, and, even when it gets triggered, the pool deadlocks iff if all work items get blocked on pending work items of the pool, which is highly unlikely but can be triggered by xfs. The patch removes the race window by removing the early exit path, which doesn't server any purpose anymore anyway" * 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix subtle pool management issue which can stall whole worker_pool
-
Roger Tseng authored
sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the device is awake while initializing a newly inserted card. Once it is called during suspending state and explicitly before rtsx_usb_suspend() acquires the same dev_mutex, both routine deadlock and further hang the driver because pm_runtime_get_sync() waits the pending PM operations. Fix this by using an empty suspend method. mmc_core always turns the LED off after a request is done and thus it is ok to remove the only rtsx_usb_turn_off_led() here. Cc: <stable@vger.kernel.org> # v3.16+ Fixes: 730876be ("mfd: Add realtek USB card reader driver") Signed-off-by:
Roger Tseng <rogerable@realtek.com> [Lee: Removed newly unused variable] Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
