- 29 Oct, 2009 7 commits
-
-
Masami Hiramatsu authored
Exit searching after finding real (not-inlined) function, because there should be no same symbol in that CU. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> LKML-Reference: <20091027204252.30545.19251.stgit@harusame> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Masami Hiramatsu authored
Fix find_probe_event() to compare both of event-name and event-group. Without this fix, kprobe-tracer overwrites existing same event-name probe even if its group-name is different. Signed-off-by:
-
Masami Hiramatsu authored
Add Intel FMA(FUSED-MULTIPLY-ADD) instructions to x86 opcode map for x86 instruction decoder. Signed-off-by:
-
Masami Hiramatsu authored
Add Intel AVX(Advanced Vector Extensions) instruction set support to x86 instruction decoder. This adds insn.vex_prefix field for storing VEX prefixes, and introduces some original tags for expressing opcodes attributes. Signed-off-by:
-
Masami Hiramatsu authored
Add pclmulq opcode to x86 opcode map. Signed-off-by:
-
Masami Hiramatsu authored
Merge INAT_REXPFX into INAT_PFX_* macro and rename it to INAT_PFX_REX. Signed-off-by:
-
Masami Hiramatsu authored
Fix superscripts position because some superscripts of SSE opcode are not put in correct position. Signed-off-by:
-
- 23 Oct, 2009 6 commits
-
-
Arnaldo Carvalho de Melo authored
Use the new pr_{err,warning,debug,etc} printout methods, just like in the kernel. Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com> [ Split this patch out, to keep perf/probes separate. ] Signed-off-by:
-
Ingo Molnar authored
Conflicts: tools/perf/Makefile Merge reason: - fix the conflict - pick up the pr_*() infrastructure to queue up dependent patch Signed-off-by: -
Arnaldo Carvalho de Melo authored
We were using eprintf in some places, that looks at a global 'verbose' level, and at other places passing a 'v' parameter to specify the verbosity level, unify it by introducing pr_{err,warning,debug,etc}, just like in the kernel. Signed-off-by: -
Frederic Weisbecker authored
Wrapping the kernel headers is dangerous when it comes to arch headers. Once we wrap asm/types.h, it will also replace the glibc asm/types.h, not only the kernel one. This results in build errors on some machines. Drop this wrapper and do its work from linux/types.h wrapper, also the glibc asm/types.h can already handle most of the type definition it was doing (typedef __u64, __u32, etc...). Todo: Check the others asm/*.h wrappers to prevent from other conflicts. Reported-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com> Signed-off-by:
-
Frederic Weisbecker authored
Currently, the callchains are displayed using a constant left margin. So depending on the current sort dimension configuration, callchains may appear to be well attached to the first sort dimension column field which is mostly the case, except when the first dimension of sorting is done by comm, because these are right aligned. This patch binds the callchain to the first letter in the first column, whatever type of column it is (dso, comm, symbol). Before: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent After: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent Also, for clarity, we don't put anymore the callchain as is but: - If we have a top level ancestor in the callchain, start it with a first ascii hook. Before: 0.80% perf [kernel] [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] After: 0.80% perf [kernel] [k] __lock_acquire | --- __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] - Otherwise, if we have several top level ancestors, then display these like we did before: 1.69% Xorg | |--21.21%-- vread_hpet | 0x7fffd85b46fc | 0x7fffd85b494d | 0x7f4fafb4e54d | |--15.15%-- exaOffscreenAlloc | |--9.09%-- I830WaitLpRing Signed-off-by: -
Frederic Weisbecker authored
While recursively printing the branches of each callchains, we forget to display the root. It is never printed. Say we have: symbol f1 f2 | -------- f3 | f4 | ---------f5 f6 Actually we never see that, instead it displays: symbol | --------- f3 | f4 | --------- f5 f6 However f1 is always the same than "symbol" and if we are sorting by symbols first then "symbol", f1 and f2 will be well aligned like in the above example, so displaying f1 looks redundant here. But if we are sorting by something else first (dso, comm, etc...), displaying f1 doesn't look redundant but rather necessary because the symbol is not well aligned anymore with its callchain: comm dso symbol f1 f2 | --------- [...] And we want the callchain to be obvious. So we fix the bug by printing the root branch, but we also filter its first entry if we are sorting by symbols first. Reported-by:Anton Blanchard <anton@samba.org> Signed-off-by:
-
- 21 Oct, 2009 5 commits
-
-
Ingo Molnar authored
Add the kernel source include file as well to the include files search path, to fix this build bug: In file included from arch/x86/tools/test_get_len.c:28: arch/x86/lib/insn.c:21:26: error: linux/string.h: No such file or directory Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap<systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020165531.4145.21872.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: -
Steven Rostedt authored
The second argument in the strtok_r() function is not to be used generically and can have different implementations. Currently the function parsing of the perf trace code uses the second argument to copy data from. This can crash the tool or just have unpredictable results. The correct solution is to use strsep() which has a defined result. I also added a check to see if the result was correct, and will break out of the loop in case it fails to parse as expected. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020232034.237814877@goodmis.org> Signed-off-by:
-
Steven Rostedt authored
When using gdb to debug perf, it is practically impossible to use when perf is compiled with -O6. For developers, this patch adds the DEBUG feature to the make command line so that a developer can easily remove the optimization flag. LKML-Reference: <1255590330.8392.446.camel@twins> Signed-off-by:
-
Masami Hiramatsu authored
Add Intel AES opcodes to x86 opcode map. These opcodes are used in arch/x86/crypt/aesni-intel_asm.S. Signed-off-by:
-
Masami Hiramatsu authored
Fix a typo in inat_get_group_attribute() which should refer inat_group_tables, not inat_escape_tables. Signed-off-by:
-
- 20 Oct, 2009 10 commits
-
-
Arnaldo Carvalho de Melo authored
We need to use map->unmap_ip() here too to match section relative symbol address to the absolute address needed to match objdump -dS addresses. Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
If the user doesn't pass a symbol name to annotate, it will annotate all the symbols that have hits, in order, just like 'perf report -s comm,dso,symbol'. This is a natural followup patch to the one that uses output_hists to find the symbols with hits. The common case is to annotate the first few entries at the top of a perf report, so lets type less characters. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We have this sym_priv_size mechanism for attaching private areas to struct symbol entries but annotate wasn't using it, adding private areas to struct symbol in addition to a ->priv pointer. Scrap all that and use the sym_priv_size mechanism. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We need this because we get section relative addresses when reading the symtabs, but when a tool like 'perf annotate' needs to match these address to what 'objdump -dS' produces we need the address + section back again. So in annotate now we look at the 'struct hist_entry' instances (that weren't really being used) so that we iterate only over the symbols that had some hit and get the map where that particular hit happened so that we can get the right address to match with annotate. Verified that at least: perf annotate mmap_read_counter # Uses the ~/bin/perf binary perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all on a 'perf record perf top' session seems to work. Signed-off-by:
-
Arjan van de Ven authored
During the Kernel Summit demo of perf/ftrace/timechart, there was a feature request to have a process filter for timechart so that you can zoom into one or a few processes that you are really interested in. This patch adds basic support for this feature, the -p (--process) option now can select a PID or a process name to be shown. Multiple -p options are allowed, and the combined set will be included in the output. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020070939.7d0fb8a7@infradead.org> Signed-off-by:
-
Ingo Molnar authored
Merge reason: Queue up dependent patch. Signed-off-by: -
Arjan van de Ven authored
[from KS feedback] Currently, scheduler delays are shown in a mostly transparent, light yellow color. This color is rather hard to see on several screens, especially projectors. This patch changes the color of the scheduler delays to be a much more "hard" yellow that survived the kernel summit projector. Reported-by:
Linus Torvalds <torvalds@osdl.org> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020064731.20ae126a@infradead.org> Signed-off-by:
-
Arjan van de Ven authored
The timechart wakeup arrows currently show no process information when the waker/wakee are processes that are not actually chosen to be shown on the timechart. This patch fixes this oversight, by looking through all processes (after giving preference to visible processes) as well as falling back to just showing the PID if no name for the process can be resolved. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Build dependencies were not properly mapped out. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To cure a bunch of: In file included from util/include/linux/bitmap.h:1, from util/header.h:8, from builtin-trace.c:7: util/include/../../../../include/linux/bitmap.h:8:26: error: linux/string.h: No such file or directory make: *** [builtin-trace.o] Error 1 make: *** Waiting for unfinished jobs.... Signed-off-by:
-
- 19 Oct, 2009 9 commits
-
-
Ingo Molnar authored
Count branches first, cache-misses second. The reason is that on x86 branches are not counted by all counters on all CPUs. Before: Performance counter stats for 'ls': 0.756653 task-clock-msecs # 0.802 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 250 page-faults # 0.330 M/sec 2375725 cycles # 3139.781 M/sec 1628129 instructions # 0.685 IPC 19643 cache-references # 25.960 M/sec 4608 cache-misses # 6.090 M/sec 342532 branches # 452.694 M/sec <not counted> branch-misses 0.000943356 seconds time elapsed After: Performance counter stats for 'ls': 1.056734 task-clock-msecs # 0.859 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 259 page-faults # 0.245 M/sec 3345932 cycles # 3166.295 M/sec 3074090 instructions # 0.919 IPC 616928 branches # 583.806 M/sec 39279 branch-misses # 6.367 % 21312 cache-references # 20.168 M/sec 3661 cache-misses # 3.464 M/sec 0.001230551 seconds time elapsed (also prettify the printout of branch misses, in case it's getting scaled.) Cc: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: -
Ingo Molnar authored
Clean up the array definition to be vertically aligned. No functional effects. Cc: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: -
Tim Blechmann authored
Adds performance event information about branches and branch misses to the default output of perf stat. Signed-off-by:
Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by:
-
Randy Dunlap authored
Check for libelf headers and glibc headers separately so that the error message correctly identifies which package installation is missing/needed. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: paulus@samba.org Cc: a.p.zijlstra@chello.nl Cc: efault@gmx.de Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <4ADBCCE8.3060300@oracle.com> Signed-off-by:
-
Tim Blechmann authored
Add delay_secs sanity check to handle_keypress, this fixes a division by zero crash. Signed-off-by:
-
Frederic Weisbecker authored
Use DECLARE_BITMAP instead of an open coded array for our bitmap of featured sections. This makes the array an unsigned long instead of a u64 but since we use a 256 bits bitmap, the array size shouldn't vary between different boxes. Signed-off-by:
-
Frederic Weisbecker authored
This provides a new set of bitmasked headers. A new field is added in the perf headers that implements a bitmap storing optional features present in the perf.data file. The layout can be pictured like this: (Usual perf headers)(Features bitmap)[Feature 0][Feature n][Feature 255] If the bit n is set, then the feature n is used in this file. They are all set in order. This brings a backward and forward compatibility. The trace_info section has moved into such optional features, this is the first and only one for now. This is backward compatible with the .32 file version although it doesn't support the previous separate trace.info file. And finally it doesn't support the current interim development version. Signed-off-by:
-
Frederic Weisbecker authored
Use the kernel bitmap library for internal perf tools uses. Signed-off-by:
-
Anton Blanchard authored
When we count both branches and branch-misses it is useful to print out the percentage of branch-misses: # perf stat -e branches -e branch-misses /bin/true Performance counter stats for '/bin/true': 401684 branches # 0.000 M/sec 23301 branch-misses # 5.801 % Signed-off-by:
-
- 17 Oct, 2009 3 commits
-
-
Ingo Molnar authored
Conflicts: kernel/trace/trace_event_profile.c Merge reason: update to -rc5 and resolve conflict. Signed-off-by: -
Masami Hiramatsu authored
Add perf-probe subcommand document and add it to command-list. Signed-off-by:
-
Masami Hiramatsu authored
Add DIE_IF() macro and replace ERR_IF() with it, and use linux/stringify.h. Signed-off-by:
-
