bch2_dev_rcu() now properly errors if the device is invalid
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Factor out bch2_show_options() into a generic helper, for debugging
option passing issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Fix the following compilation error:

```
fs/bcachefs/sb-members.c: In function ‘bch2_sb_member_alloc’:
fs/bcachefs/sb-members.c:508:2: error: a label can only be part of a statement and a declaration is not a statement
  508 |  unsigned nr_devices = max_t(unsigned, dev_idx + 1, c->sb.nr_devices);
```

Fixes: a7d364a133c7 ("bcachefs: bch2_sb_member_alloc()")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

refactoring
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

No reason for it not to be where it's needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This adds mount options for specifying recovery passes to run, or
exclude; the immediate need for this is that backpointers fsck is having
trouble completing, so we need a way to skip it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When freeing in a shrinker callback, we need to notify memory reclaim,
so it knows forward progress has been made.

Normally this is done in e.g. slab code, but we're not freeing through
slab - or rather we are, but these allocations are big, and use the
kmalloc_large() path.

This is really a bug in the slub code, but we're working around it here
for now.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is needed for overlayfs, which is used by container managers.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

this was an oversight: rebalance is moving data to a specific device, so
we don't want it falling back to the full filesystem
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

rebalance writes must be BCH_WRITE_ALLOC_NOWAIT because they don't
allocate from the full filesystem - but we don't want spurious
allocation failures due to open buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

like the previous patch, kill use of bare arrays; the encryption code
likes to work in big batches, so this is a small performance
improvement.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

convert to darray, and add a fallback when allocation fails
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add the __counted_by compiler attribute to the flexible array members
devs to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.

Increment nr_devs before adding a new device to the devs array and
adjust the array indexes accordingly. Add a helper macro for adding a
new device.

In bch2_journal_read(), explicitly set nr_devs to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We enable idmapped mounts for bcachefs. Here, we just pass down
the user_namespace argument from the VFS methods to the relevant
helpers.

The idmap test in bcachefs is as following:

```
1. losetup /dev/loop1 bcachefs.img
2. ./bcachefs format /dev/loop1
3. mount -t bcachefs /dev/loop1 /mnt/bcachefs/
4. ./mount-idmapped --map-mount b:0:1000:1 /mnt/bcachefs /mnt/idmapped1/

ll /mnt/bcachefs
total 2
drwx------. 2 root root    0 Jun 14 14:10 lost+found
-rw-r--r--. 1 root root 1945 Jun 14 14:12 profile

ll /mnt/idmapped1/

total 2
drwx------. 2 1000 1000    0 Jun 14 14:10 lost+found
-rw-r--r--. 1 1000 1000 1945 Jun 14 14:12 profile
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add the __counted_by compiler attribute to the flexible array member
x_name to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

A user with a 30 tb device is overflowing the INT_MAX limit on vmalloc
allocations...
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

better memory allocation profiling support
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Use jiffies macros instead of using jiffies directly to handle wraparound.
Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_bset_fix_lookup_table is too complicated to be easily understood,
the comment "l now > where" there is also incorrect when where ==
t->end_offset. This patch therefore refactor the function, the idea is
that when where >= rw_aux_tree(b, t)[t->size - 1].offset, we don't need
to adjust the rw aux tree.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We rely on the trans->locked to know if a trans has nodes locked for
assertions about deadlocks; there can't be more than one trans in the
same process that is locked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

folio_has_private() is an attractive nuisance; filesystem authors
generally don't realise that it actually checks two flags (one of which
is never set by bcachefs).  There's no need to check the private flag at
all; for folios owned by bcachefs, we know that folio->private is NULL
when the private flag is clear and non-NULL when the private flag is set.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It's really not needed: the only locks used here are the btree cache
lock, which we drop for GFP_WAIT allocations, and btree node locks - but
we also drop those for GFP_WAIT allocations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Use helper functions to make code more readable.

Similar to commit a5488f29 ("fs: simplify ->listxattr() implementation")
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Remove struct nop_posix_acl_{access,default} for bcachefs filesystem
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api. See [1] for details.

Link [1]: https://patchwork.kernel.org/project/linux-fsdevel/cover/20230125-fs-acl-remove-generic-xattr-handlers-v3-0-f760cc58967d@kernel.org/Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

iter here is unused, remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

After reducing the search range when building the aux tree, the prev array
stuff is no longer useful, so remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When the search key's mantissa is larger than the node i's, we know that
the search key is larger than the first key of the cacheline corresponding
to node i, so that when we are calculating the mantissa of right side
nodes of node i, the left side of the search range can be the first key
of node i. Once the search range is minimized, the mantissa we are
calculating can have more useful bits, thus reduce the slow path
comparison. Besides, we can now remove all the prev array stuff.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This patch replaces open-coded extra computation to eytzinger1_extra.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This logic is no longer useful since commit
3ce8b463 ("bcachefs: kill bset_tree->max_key"), so remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The idx parameter of bkey_mantissa_bits_dropped is unused, remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The idx parameter of bkey_mantissa became unused since commit
b904a799 ("bcachefs: Go back to 16 bit mantissa bkey floats"),
so remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

factoring out a helper
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>