- 19 Sep, 2023 1 commit
-
-
Jisheng Zhang authored
commit 133466c3 ("net: stmmac: use per-queue 64 bit statistics where necessary") caused one regression as found by Uwe, the backtrace looks like: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3-dirty #21 Hardware name: STM32 (Device Tree Support) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x60/0x90 dump_stack_lvl from register_lock_class+0x98c/0x99c register_lock_class from __lock_acquire+0x74/0x293c __lock_acquire from lock_acquire+0x134/0x398 lock_acquire from stmmac_get_stats64+0x2ac/0x2fc stmmac_get_stats64 from dev_get_stats+0x44/0x130 dev_get_stats from rtnl_fill_stats+0x38/0x120 rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4 rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144 rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88 rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec __dev_notify_flags from dev_change_flags+0x50/0x5c dev_change_flags from ip_auto_config+0x2f4/0x1260 ip_auto_config from do_one_initcall+0x70/0x35c do_one_initcall from kernel_init_freeable+0x2ac/0x308 kernel_init_freeable from kernel_init+0x1c/0x138 kernel_init from ret_from_fork+0x14/0x2c The reason is the rxq|txq_stats structures are not what expected because stmmac_open() -> __stmmac_open() the structure is overwritten by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));" This causes the well initialized syncp member of rxq|txq_stats is overwritten unexpectedly as pointed out by Johannes and Uwe. Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats as ____cacheline_aligned_in_smp. Fixes: 133466c3 ("net: stmmac: use per-queue 64 bit statistics where necessary") Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by:
Paolo Abeni <pabeni@redhat.com>
-
- 18 Sep, 2023 22 commits
-
-
David S. Miller authored
Peter Lafreniere says: ==================== ax25: Update link for linux-ax25.org http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Update all references to the dead link to its replacement. As the three touched files are in different areas of the tree, this is being sent with one patch per file. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peter Lafreniere authored
http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Change all references to the old site in the ax25 Kconfig to its replacement. Link: https://marc.info/?m=166792551600315Signed-off-by:
Peter Lafreniere <peter@n8pjl.ca> Signed-off-by:
-
Peter Lafreniere authored
http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Update all links to the new URL. Link: https://marc.info/?m=166792551600315Signed-off-by:
-
Peter Lafreniere authored
http://linux-ax25.org has been down for nearly a year. Its official replacement is https://linux-ax25.in-berlin.de. Update the documentation to point there instead. And acknowledge that while the linux-hams list isn't entirely dead, it isn't what most would call 'active'. Remove that word. Link: https://marc.info/?m=166792551600315Signed-off-by:
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: fix stalled connections Daire reported a few issues with MPTCP where some connections were stalled in different states. Paolo did a great job fixing them. Patch 1 fixes bogus receive window shrinkage with multiple subflows. Due to a race condition and unlucky circumstances, that may lead to TCP-level window shrinkage, and the connection being stalled on the sender end. Patch 2 is a preparation for patch 3 which processes pending subflow errors on close. Without that and under specific circumstances, the MPTCP-level socket might not switch to the CLOSE state and stall. Patch 4 is also a preparation patch for the next one. Patch 5 fixes MPTCP connections not switching to the CLOSE state when all subflows have been closed but no DATA_FIN have been exchanged to explicitly close the MPTCP connection. Now connections in such state will switch to the CLOSE state after a timeout, still allowing the "make-after-break" feature but making sure connections don't stall forever. It will be possible to modify this timeout -- currently matching TCP TIMEWAIT value (60 seconds) -- in a future version. ==================== Signed-off-by:Matthieu Baerts <matthieu.baerts@tessares.net>
-
Paolo Abeni authored
According to RFC 8684 section 3.3: A connection is not closed unless [...] or an implementation-specific connection-level send timeout. Currently the MPTCP protocol does not implement such timeout, and connection timing-out at the TCP-level never move to close state. Introduces a catch-up condition at subflow close time to move the MPTCP socket to close, too. That additionally allows removing similar existing inside the worker. Finally, allow some additional timeout for plain ESTABLISHED mptcp sockets, as the protocol allows creating new subflows even at that point and making the connection functional again. This issue is actually present since the beginning, but it is basically impossible to solve without a long chain of functional pre-requisites topped by commit bbd49d11 ("mptcp: consolidate transition to TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current patch, please also backport this other commit as well. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430 Fixes: e16163b6 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Signed-off-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Paolo Abeni authored
The msk socket uses to different timeout to track close related events and retransmissions. The existing helpers do not indicate clearly which timer they actually touch, making the related code quite confusing. Change the existing helpers name to avoid such confusion. No functional change intended. This patch is linked to the next one ("mptcp: fix dangling connection hang-up"). The two patches are supposed to be backported together. Cc: stable@vger.kernel.org # v5.11+ Signed-off-by: -
Paolo Abeni authored
On incoming TCP reset, subflow closing could happen before error propagation. That in turn could cause the socket error being ignored, and a missing socket state transition, as reported by Daire-Byrne. Address the issues explicitly checking for subflow socket error at close time. To avoid code duplication, factor-out of __mptcp_error_report() a new helper implementing the relevant bits. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429 Fixes: 15cc1045 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
This will simplify the next patch ("mptcp: process pending subflow error on close"). No functional change intended. Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: -
Paolo Abeni authored
In case multiple subflows race to update the mptcp-level receive window, the subflow losing the race should use the window value provided by the "winning" subflow to update it's own tcp-level rcv_wnd. To such goal, the current code bogusly uses the mptcp-level rcv_wnd value as observed before the update attempt. On unlucky circumstances that may lead to TCP-level window shrinkage, and stall the other end. Address the issue feeding to the rcv wnd update the correct value. Fixes: f3589be0 ("mptcp: never shrink offered window") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427Signed-off-by:
-
David S. Miller authored
Gerhard Engleder says: ==================== tsnep: Fixes based on napi.rst Based on the documentation networking/napi.rst some fixes have been done. tsnep driver should be in line with this new documentation after these fixes. ==================== Signed-off-by: -
Gerhard Engleder authored
According to the NAPI documentation networking/napi.rst, Rx specific APIs like page pool and XDP cannot be used at all when budget is 0. skb Tx processing should happen regardless of the budget. Stop NAPI polling after Tx processing and skip Rx processing if budget is 0. Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by:
-
Gerhard Engleder authored
According to the NAPI documentation networking/napi.rst, for the ethtool API a channel is a IRQ/NAPI which services queues of a given type. tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair. Therefore, combined channels shall be returned instead of separate tx/rx channels. Signed-off-by:
-
Gerhard Engleder authored
According to the NAPI documentation networking/napi.rst, drivers which have to mask interrupts explicitly should use the napi_schedule_prep() and __napi_schedule() calls. No problem seen so far with current implementation. Nevertheless, let's align the implementation with documentation. Signed-off-by:
-
David S. Miller authored
Sebastian Andrzej Siewior says: ==================== net: hsr: Properly parse HSRv1 supervisor frames. this is a follow-up to https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/ replacing https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/ by grabing/ adding tags and reposting with a commit message plus a missing __packed to a struct (#2) plus extending the testsuite to sover HSRv1 which is what broke here (#3-#5). HSRv0 is (was) not affected. ==================== Signed-off-by:
-
Sebastian Andrzej Siewior authored
The testsuite already has simply tests for HSRv0. The testuite would have been able to notice the v1 breakage if it was there at the time. Extend the testsuite to also cover HSRv1. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Move the code and group into functions so it will be easier to extend the test to HSRv1 so that both versions are covered. Move the ping/test part into do_complete_ping_test() and the interface setup into setup_hsr_interfaces(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
The timeout in the while loop is never subtracted due wrong usage of `let' leading to an endless loop if the former condition never gets true. Put the statement for let in quotes so it is parsed as a single statement. Signed-off-by:
-
Sebastian Andrzej Siewior authored
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed attribute to ensure the compiler does not add any padding. Due to the size and __packed attribute of the structs that use hsr_sup_tlv it has no functional impact. Add __packed to struct hsr_sup_tlv. Signed-off-by:
-
Lukasz Majewski authored
While adding support for parsing the redbox supervision frames, the author added `pull_size' and `total_pull_size' to track the amount of bytes that were pulled from the skb during while parsing the skb so it can be reverted/ pushed back at the end. In the process probably copy&paste error occurred and for the HSRv1 case the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used instead of hsr_sup_tag. The later error didn't matter because both structs have the size so HSRv0 was still working. It broke however HSRv1 parsing because struct ethhdr is larger than struct hsr_tag. Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case followed by hsr_sup_tag. [bigeasy: commit message] Fixes: eafaa88b ("net: hsr: Add support for redbox supervision frames")' Suggested-by: Tristram.Ha@microchip.com Signed-off-by:
Lukasz Majewski <lukma@denx.de> Signed-off-by:
-
Eric Dumazet authored
dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr", not in the "byte 7" as Jann claimed. We need to make sure the ICMP messages are big enough, using more standard ways (no more assumptions). syzbot reported: BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline] BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867 icmpv6_rcv+0x19d5/0x30d0 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:304 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:304 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x83b/0x920 tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Fixes: 977ad86c ("dccp: Fix out of bounds access in DCCP error handler") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jann Horn <jannh@google.com> Reviewed-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Johnathan Mantey authored
Report the carrier/no-carrier state for the network interface shared between the BMC and the passthrough channel. Without this functionality the BMC is unable to reconfigure the NIC in the event of a re-cabling to a different subnet. Signed-off-by:
Johnathan Mantey <johnathanx.mantey@intel.com> Signed-off-by:
-
- 17 Sep, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-David S. Miller authored
queue Tony Nguyen says: ==================== This series contains updates to iavf and i40e drivers. Radoslaw prevents admin queue operations being added when the driver is being removed for iavf. Petr Oros immediately starts reconfiguration on changes to VLANs on iavf. Ivan Vecera moves reset of VF to occur after port VLAN values are set on i40e. ==================== Signed-off-by: -
Eric Dumazet authored
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor pointing to non TCP socket (af_unix for example). Return -EINVAL if this is attempted, instead of crashing the kernel. Fixes: 7ba24713 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code") Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Kyle Zeng authored
Currently, we assume the skb is associated with a device before calling __ip_options_compile, which is not always the case if it is re-routed by ipvs. When skb->dev is NULL, dev_net(skb->dev) will become null-dereference. This patch adds a check for the edge case and switch to use the net_device from the rtable when skb->dev is NULL. Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Suggested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Kyle Zeng <zengyhkyle@gmail.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Cc: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by:
-
- 16 Sep, 2023 4 commits
-
-
Vinicius Costa Gomes authored
When an XDP redirect happens before the link is ready, that transmission will not finish and will timeout, causing an adapter reset. If the redirects do not stop, the adapter will not stop resetting. Wait for the driver to signal that there's a carrier before allowing transmissions to proceed. Previous code was relying that when __IGC_DOWN is cleared, the NIC is ready to transmit as all the queues are ready, what happens is that the carrier presence will only be signaled later, after the watchdog workqueue has a chance to run. And during this interval (between clearing __IGC_DOWN and the watchdog running) if any transmission happens the timeout is emitted (detected by igc_tx_timeout()) which causes the reset, with the potential for the infinite loop. Fixes: 4ff32036 ("igc: Add support for XDP_REDIRECT action") Reported-by:
Ferenc Fejes <ferenc.fejes@ericsson.com> Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.camel@ericsson.com/Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Andy Shevchenko authored
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them. It is less verbose and it improves the type checking and semantic. While at it, add missing header inclusion (should be bitops.h, but with the above change it becomes bitmap.h). Suggested-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154534.4174265-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
David Christensen authored
The ionic device supports a maximum buffer length of 16 bits (see ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to the receive rings, the function ionic_rx_fill() uses 16bit math when calculating the number of pages to allocate for an RX descriptor, given the interface's MTU setting. If the system PAGE_SIZE >= 64KB, and the buf_info->page_offset is 0, the remain_len value will never decrement from the original MTU value and the frag_len value will always be 0, causing additional pages to be allocated as scatter- gather elements unnecessarily. A similar math issue exists in ionic_rx_frags(), but no failures have been observed here since a 64KB page should not normally require any scatter-gather elements at any legal Ethernet MTU size. Fixes: 4b0a7539 ("ionic: implement Rx page reuse") Signed-off-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 450 insertions(+), 36 deletions(-). The main changes are: 1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao. 2) Check whether override is allowed in kprobe mult, from Jiri Olsa. 3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick. 4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann, Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor, Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell ==================== Signed-off-by:
-
- 15 Sep, 2023 10 commits
-
-
Nick Desaulniers authored
Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by:
Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com> Reported-by:
Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://github.com/ClangBuiltLinux/linux/issues/1913Debugged-by:
Nathan Chancellor <nathan@kernel.org> Co-developed-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jiri Olsa authored
Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by:
-
Jiri Olsa authored
Dan reported Smatch static checker warning due to missing error value set in uprobe multi link's get_pid_task error path. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/bpf/c5ffa7c0-6b06-40d5-aca2-63833b5cd9af@moroto.mountain/Signed-off-by:
Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230915101420.1193800-1-jolsa@kernel.orgSigned-off-by:
-
Hou Tao authored
For global per-cpu allocator, the size of free object in free list doesn't match with unit_size and now there is no way to get the size of per-cpu pointer saved in free object, so just skip the checking. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/bpf/20230913133436.0eeec4cb@canb.auug.org.au/Signed-off-by:
Hou Tao <houtao1@huawei.com> Tested-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230913135943.3137292-1-houtao@huaweicloud.comSigned-off-by:
-
Ilya Leoshkevich authored
bpf_nf testcase fails on s390x: bpf_skb_ct_lookup() cannot find the entry that was added by bpf_ct_insert_entry() within the same BPF function. The reason is that this entry is deleted by nf_ct_gc_expired(). The CT timeout starts ticking after the CT confirmation; therefore nf_conn.timeout is initially set to the timeout value, and __nf_conntrack_confirm() sets it to the deadline value. bpf_ct_insert_entry() sets IPS_CONFIRMED_BIT, but does not adjust the timeout, making its value meaningless and causing false positives. Fix the problem by making bpf_ct_insert_entry() adjust the timeout, like __nf_conntrack_confirm(). Fixes: 2cdaa3ee ("netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/bpf/20230830011128.1415752-3-iii@linux.ibm.comSigned-off-by:
-
Ivan Vecera authored
If port VLAN is configured on a VF then any other VLANs on top of this VF are broken. During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities but this reset occurs too early, prior setting of vf->info.pvid field and because this field can be zero during i40e_vc_get_vf_resources_msg() then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver. This is wrong because iavf driver should not report VLAN offloading capability when port VLAN is configured as i40e does not support QinQ offloading. Fix the issue by moving VF reset after setting of vf->port_vlan_id field. Without this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ dmesg -l err | grep iavf [1292500b.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID With this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: off [requested on] tx-vlan-offload: off [requested on] $ dmesg -l err | grep iavf Fixes: f9b4b627 ("i40e: Reset the VF upon conflicting VLAN configuration") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
-
Petr Oros authored
When the iavf driver wants to reconfigure the VLAN filters (iavf_add_vlan, iavf_del_vlan), it sets a flag in aq_required: adapter->aq_required |= IAVF_FLAG_AQ_ADD_VLAN_FILTER; or: adapter->aq_required |= IAVF_FLAG_AQ_DEL_VLAN_FILTER; This is later processed by the watchdog_task, but it runs periodically every 2 seconds, so it can be a long time before it processes the request. In the worst case, the interface is unable to receive traffic for more than 2 seconds for no objective reason. Fixes: 5eae00c5 ("i40evf: main driver core") Signed-off-by:
Petr Oros <poros@redhat.com> Co-developed-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by:
-
Petr Oros authored
Add helper for set iavf aq request AVF_FLAG_AQ_* and immediately schedule watchdog_task. Helper will be used in cases where it is necessary to run aq requests asap Signed-off-by:
-
Radoslaw Tyl authored
Prevent schedule operations for adminq during device remove and when __IAVF_IN_REMOVE_TASK flag is set. Currently, the iavf_down function adds operations for adminq that shouldn't be processed when the device is in the __IAVF_REMOVE state. Reproduction: echo 4 > /sys/bus/pci/devices/0000:17:00.0/sriov_numvfs ip link set dev ens1f0 vf 0 trust on ip link set dev ens1f0 vf 1 trust on ip link set dev ens1f0 vf 2 trust on ip link set dev ens1f0 vf 3 trust on ip link set dev ens1f0 vf 0 mac 00:22:33:44:55:66 ip link set dev ens1f0 vf 1 mac 00:22:33:44:55:67 ip link set dev ens1f0 vf 2 mac 00:22:33:44:55:68 ip link set dev ens1f0 vf 3 mac 00:22:33:44:55:69 echo 0000:17:02.0 > /sys/bus/pci/devices/0000\:17\:02.0/driver/unbind echo 0000:17:02.1 > /sys/bus/pci/devices/0000\:17\:02.1/driver/unbind echo 0000:17:02.2 > /sys/bus/pci/devices/0000\:17\:02.2/driver/unbind echo 0000:17:02.3 > /sys/bus/pci/devices/0000\:17\:02.3/driver/unbind sleep 10 echo 0000:17:02.0 > /sys/bus/pci/drivers/iavf/bind echo 0000:17:02.1 > /sys/bus/pci/drivers/iavf/bind echo 0000:17:02.2 > /sys/bus/pci/drivers/iavf/bind echo 0000:17:02.3 > /sys/bus/pci/drivers/iavf/bind modprobe vfio-pci echo 8086 154c > /sys/bus/pci/drivers/vfio-pci/new_id qemu-system-x86_64 -accel kvm -m 4096 -cpu host \ -drive file=centos9.qcow2,if=none,id=virtio-disk0 \ -device virtio-blk-pci,drive=virtio-disk0,bootindex=0 -smp 4 \ -device vfio-pci,host=17:02.0 -net none \ -device vfio-pci,host=17:02.1 -net none \ -device vfio-pci,host=17:02.2 -net none \ -device vfio-pci,host=17:02.3 -net none \ -daemonize -vnc :5 Current result: There is a probability that the mac of VF in guest is inconsistent with it in host Expected result: When passthrough NIC VF to guest, the VF in guest should always get the same mac as it in host. Fixes: 14756b2a ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
netfilter pull request 23-09-13 ==================== The following patchset contains Netfilter fixes for net: 1) Do not permit to remove rules from chain binding, otherwise double rule release is possible, triggering UaF. This rule deletion support does not make sense and userspace does not use this. Problem exists since the introduction of chain binding support. 2) rbtree GC worker only collects the elements that have expired. This operation is not destructive, therefore, turn write into read spinlock to avoid datapath contention due to GC worker run. This was not fixed in the recent GC fix batch in the 6.5 cycle. 3) pipapo set backend performs sync GC, therefore, catchall elements must use sync GC queue variant. This bug was introduced in the 6.5 cycle with the recent GC fixes. 4) Stop GC run if memory allocation fails in pipapo set backend, otherwise access to NULL pointer to GC transaction object might occur. This bug was introduced in the 6.5 cycle with the recent GC fixes. 5) rhash GC run uses an iterator that might hit EAGAIN to rewind, triggering double-collection of the same element. This bug was introduced in the 6.5 cycle with the recent GC fixes. 6) Do not permit to remove elements in anonymous sets, this type of sets are populated once and then bound to rules. This fix is similar to the chain binding patch coming first in this batch. API permits since the very beginning but it has no use case from userspace. ==================== Signed-off-by:
-
