1. 03 Nov, 2020 5 commits
  2. 02 Nov, 2020 7 commits
  3. 01 Nov, 2020 3 commits
    • Jakub Kicinski's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 859191b2
      Jakub Kicinski authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contains Netfilter fixes for net:
      
      1) Incorrect netlink report logic in flowtable and genID.
      
      2) Add a selftest to check that wireguard passes the right sk
         to ip_route_me_harder, from Jason A. Donenfeld.
      
      3) Pass the actual sk to ip_route_me_harder(), also from Jason.
      
      4) Missing expression validation of updates via nft --check.
      
      5) Update byte and packet counters regardless of whether they
         match, from Stefano Brivio.
      ====================
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      859191b2
    • wenxu's avatar
      ip_tunnel: fix over-mtu packet send fail without TUNNEL_DONT_FRAGMENT flags · 20149e9e
      wenxu authored
      The tunnel device such as vxlan, bareudp and geneve in the lwt mode set
      the outer df only based TUNNEL_DONT_FRAGMENT.
      And this was also the behavior for gre device before switching to use
      ip_md_tunnel_xmit in commit 962924fa ("ip_gre: Refactor collect
      metatdata mode tunnel xmit to ip_md_tunnel_xmit")
      
      When the ip_gre in lwt mode xmit with ip_md_tunnel_xmi changed the rule and
      make the discrepancy between handling of DF by different tunnels. So in the
      ip_md_tunnel_xmit should follow the same rule like other tunnels.
      
      Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel")
      Signed-off-by: default avatarwenxu <wenxu@ucloud.cn>
      Link: https://lore.kernel.org/r/1604028728-31100-1-git-send-email-wenxu@ucloud.cnSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      20149e9e
    • Mark Deneen's avatar
      cadence: force nonlinear buffers to be cloned · 403dc167
      Mark Deneen authored
      In my test setup, I had a SAMA5D27 device configured with ip forwarding, and
      second device with usb ethernet (r8152) sending ICMP packets.  If the packet
      was larger than about 220 bytes, the SAMA5 device would "oops" with the
      following trace:
      
      kernel BUG at net/core/skbuff.c:1863!
      Internal error: Oops - BUG: 0 [#1] ARM
      Modules linked in: xt_MASQUERADE ppp_async ppp_generic slhc iptable_nat xt_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 can_raw can bridge stp llc ipt_REJECT nf_reject_ipv4 sd_mod cdc_ether usbnet usb_storage r8152 scsi_mod mii o
      ption usb_wwan usbserial micrel macb at91_sama5d2_adc phylink gpio_sama5d2_piobu m_can_platform m_can industrialio_triggered_buffer kfifo_buf of_mdio can_dev fixed_phy sdhci_of_at91 sdhci_pltfm libphy sdhci mmc_core ohci_at91 ehci_atmel o
      hci_hcd iio_rescale industrialio sch_fq_codel spidev prox2_hal(O)
      CPU: 0 PID: 0 Comm: swapper Tainted: G           O      5.9.1-prox2+ #1
      Hardware name: Atmel SAMA5
      PC is at skb_put+0x3c/0x50
      LR is at macb_start_xmit+0x134/0xad0 [macb]
      pc : [<c05258cc>]    lr : [<bf0ea5b8>]    psr: 20070113
      sp : c0d01a60  ip : c07232c0  fp : c4250000
      r10: c0d03cc8  r9 : 00000000  r8 : c0d038c0
      r7 : 00000000  r6 : 00000008  r5 : c59b66c0  r4 : 0000002a
      r3 : 8f659eff  r2 : c59e9eea  r1 : 00000001  r0 : c59b66c0
      Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
      Control: 10c53c7d  Table: 2640c059  DAC: 00000051
      Process swapper (pid: 0, stack limit = 0x75002d81)
      
      <snipped stack>
      
      [<c05258cc>] (skb_put) from [<bf0ea5b8>] (macb_start_xmit+0x134/0xad0 [macb])
      [<bf0ea5b8>] (macb_start_xmit [macb]) from [<c053e504>] (dev_hard_start_xmit+0x90/0x11c)
      [<c053e504>] (dev_hard_start_xmit) from [<c0571180>] (sch_direct_xmit+0x124/0x260)
      [<c0571180>] (sch_direct_xmit) from [<c053eae4>] (__dev_queue_xmit+0x4b0/0x6d0)
      [<c053eae4>] (__dev_queue_xmit) from [<c05a5650>] (ip_finish_output2+0x350/0x580)
      [<c05a5650>] (ip_finish_output2) from [<c05a7e24>] (ip_output+0xb4/0x13c)
      [<c05a7e24>] (ip_output) from [<c05a39d0>] (ip_forward+0x474/0x500)
      [<c05a39d0>] (ip_forward) from [<c05a13d8>] (ip_sublist_rcv_finish+0x3c/0x50)
      [<c05a13d8>] (ip_sublist_rcv_finish) from [<c05a19b8>] (ip_sublist_rcv+0x11c/0x188)
      [<c05a19b8>] (ip_sublist_rcv) from [<c05a2494>] (ip_list_rcv+0xf8/0x124)
      [<c05a2494>] (ip_list_rcv) from [<c05403c4>] (__netif_receive_skb_list_core+0x1a0/0x20c)
      [<c05403c4>] (__netif_receive_skb_list_core) from [<c05405c4>] (netif_receive_skb_list_internal+0x194/0x230)
      [<c05405c4>] (netif_receive_skb_list_internal) from [<c0540684>] (gro_normal_list.part.0+0x14/0x28)
      [<c0540684>] (gro_normal_list.part.0) from [<c0541280>] (napi_complete_done+0x16c/0x210)
      [<c0541280>] (napi_complete_done) from [<bf14c1c0>] (r8152_poll+0x684/0x708 [r8152])
      [<bf14c1c0>] (r8152_poll [r8152]) from [<c0541424>] (net_rx_action+0x100/0x328)
      [<c0541424>] (net_rx_action) from [<c01012ec>] (__do_softirq+0xec/0x274)
      [<c01012ec>] (__do_softirq) from [<c012d6d4>] (irq_exit+0xcc/0xd0)
      [<c012d6d4>] (irq_exit) from [<c0160960>] (__handle_domain_irq+0x58/0xa4)
      [<c0160960>] (__handle_domain_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90)
      Exception stack(0xc0d01ef0 to 0xc0d01f38)
      1ee0:                                     00000000 0000003d 0c31f383 c0d0fa00
      1f00: c0d2eb80 00000000 c0d2e630 4dad8c49 4da967b0 0000003d 0000003d 00000000
      1f20: fffffff5 c0d01f40 c04e0f88 c04e0f8c 30070013 ffffffff
      [<c0100b0c>] (__irq_svc) from [<c04e0f8c>] (cpuidle_enter_state+0x7c/0x378)
      [<c04e0f8c>] (cpuidle_enter_state) from [<c04e12c4>] (cpuidle_enter+0x28/0x38)
      [<c04e12c4>] (cpuidle_enter) from [<c014f710>] (do_idle+0x194/0x214)
      [<c014f710>] (do_idle) from [<c014fa50>] (cpu_startup_entry+0xc/0x14)
      [<c014fa50>] (cpu_startup_entry) from [<c0a00dc8>] (start_kernel+0x46c/0x4a0)
      Code: e580c054 8a000002 e1a00002 e8bd8070 (e7f001f2)
      ---[ end trace 146c8a334115490c ]---
      
      The solution was to force nonlinear buffers to be cloned.  This was previously
      reported by Klaus Doth (https://www.spinics.net/lists/netdev/msg556937.html)
      but never formally submitted as a patch.
      
      This is the third revision, hopefully the formatting is correct this time!
      Suggested-by: default avatarKlaus Doth <krnl@doth.eu>
      Fixes: 653e92a9 ("net: macb: add support for padding and fcs computation")
      Signed-off-by: default avatarMark Deneen <mdeneen@saucontech.com>
      Link: https://lore.kernel.org/r/20201030155814.622831-1-mdeneen@saucontech.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      403dc167
  4. 31 Oct, 2020 5 commits
    • Jakub Kicinski's avatar
      Merge branch 'ipv6-reply-icmp-error-if-fragment-doesn-t-contain-all-headers' · 72a41f95
      Jakub Kicinski authored
      Hangbin Liu says:
      
      ====================
      IPv6: reply ICMP error if fragment doesn't contain all headers
      
      When our Engineer run latest IPv6 Core Conformance test, test v6LC.1.3.6:
      First Fragment Doesn’t Contain All Headers[1] failed. The test purpose is to
      verify that the node (Linux for example) should properly process IPv6 packets
      that don’t include all the headers through the Upper-Layer header.
      
      Based on RFC 8200, Section 4.5 Fragment Header
      
        -  If the first fragment does not include all headers through an
           Upper-Layer header, then that fragment should be discarded and
           an ICMP Parameter Problem, Code 3, message should be sent to
           the source of the fragment, with the Pointer field set to zero.
      
      The first patch add a definition for ICMPv6 Parameter Problem, code 3.
      The second patch add a check for the 1st fragment packet to make sure
      Upper-Layer header exist.
      
      [1] Page 68, v6LC.1.3.6: First Fragment Doesn’t Contain All Headers part A, B,
      C and D at https://ipv6ready.org/docs/Core_Conformance_5_0_0.pdf
      [2] My reproducer:
      
      import sys, os
      from scapy.all import *
      
      def send_frag_dst_opt(src_ip6, dst_ip6):
          ip6 = IPv6(src = src_ip6, dst = dst_ip6, nh = 44)
      
          frag_1 = IPv6ExtHdrFragment(nh = 60, m = 1)
          dst_opt = IPv6ExtHdrDestOpt(nh = 58)
      
          frag_2 = IPv6ExtHdrFragment(nh = 58, offset = 4, m = 1)
          icmp_echo = ICMPv6EchoRequest(seq = 1)
      
          pkt_1 = ip6/frag_1/dst_opt
          pkt_2 = ip6/frag_2/icmp_echo
      
          send(pkt_1)
          send(pkt_2)
      
      def send_frag_route_opt(src_ip6, dst_ip6):
          ip6 = IPv6(src = src_ip6, dst = dst_ip6, nh = 44)
      
          frag_1 = IPv6ExtHdrFragment(nh = 43, m = 1)
          route_opt = IPv6ExtHdrRouting(nh = 58)
      
          frag_2 = IPv6ExtHdrFragment(nh = 58, offset = 4, m = 1)
          icmp_echo = ICMPv6EchoRequest(seq = 2)
      
          pkt_1 = ip6/frag_1/route_opt
          pkt_2 = ip6/frag_2/icmp_echo
      
          send(pkt_1)
          send(pkt_2)
      
      if __name__ == '__main__':
          src = sys.argv[1]
          dst = sys.argv[2]
          conf.iface = sys.argv[3]
          send_frag_dst_opt(src, dst)
          send_frag_route_opt(src, dst)
      ====================
      
      Link: https://lore.kernel.org/r/20201027123313.3717941-1-liuhangbin@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      72a41f95
    • Hangbin Liu's avatar
      IPv6: reply ICMP error if the first fragment don't include all headers · 2efdaaaf
      Hangbin Liu authored
      Based on RFC 8200, Section 4.5 Fragment Header:
      
        -  If the first fragment does not include all headers through an
           Upper-Layer header, then that fragment should be discarded and
           an ICMP Parameter Problem, Code 3, message should be sent to
           the source of the fragment, with the Pointer field set to zero.
      
      Checking each packet header in IPv6 fast path will have performance impact,
      so I put the checking in ipv6_frag_rcv().
      
      As the packet may be any kind of L4 protocol, I only checked some common
      protocols' header length and handle others by (offset + 1) > skb->len.
      Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments
      (fragmented packet with only one fragment).
      
      When send ICMP error message, if the 1st truncated fragment is ICMP message,
      icmp6_send() will break as is_ineligible() return true. So I added a check
      in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header
      return false.
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2efdaaaf
    • Hangbin Liu's avatar
      ICMPv6: Add ICMPv6 Parameter Problem, code 3 definition · b59e286b
      Hangbin Liu authored
      Based on RFC7112, Section 6:
      
         IANA has added the following "Type 4 - Parameter Problem" message to
         the "Internet Control Message Protocol version 6 (ICMPv6) Parameters"
         registry:
      
            CODE     NAME/DESCRIPTION
             3       IPv6 First Fragment has incomplete IPv6 Header Chain
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b59e286b
    • Colin Ian King's avatar
      net: atm: fix update of position index in lec_seq_next · 2f71e006
      Colin Ian King authored
      The position index in leq_seq_next is not updated when the next
      entry is fetched an no more entries are available. This causes
      seq_file to report the following error:
      
      "seq_file: buggy .next function lec_seq_next [lec] did not update
       position index"
      
      Fix this by always updating the position index.
      
      [ Note: this is an ancient 2002 bug, the sha is from the
        tglx/history repo ]
      
      Fixes 4aea2cbf ("[ATM]: Move lan seq_file ops to lec.c [1/3]")
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Link: https://lore.kernel.org/r/20201027114925.21843-1-colin.king@canonical.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2f71e006
    • Stefano Brivio's avatar
      netfilter: ipset: Update byte and packet counters regardless of whether they match · 7d10e62c
      Stefano Brivio authored
      In ip_set_match_extensions(), for sets with counters, we take care of
      updating counters themselves by calling ip_set_update_counter(), and of
      checking if the given comparison and values match, by calling
      ip_set_match_counter() if needed.
      
      However, if a given comparison on counters doesn't match the configured
      values, that doesn't mean the set entry itself isn't matching.
      
      This fix restores the behaviour we had before commit 4750005a
      ("netfilter: ipset: Fix "don't update counters" mode when counters used
      at the matching"), without reintroducing the issue fixed there: back
      then, mtype_data_match() first updated counters in any case, and then
      took care of matching on counters.
      
      Now, if the IPSET_FLAG_SKIP_COUNTER_UPDATE flag is set,
      ip_set_update_counter() will anyway skip counter updates if desired.
      
      The issue observed is illustrated by this reproducer:
      
        ipset create c hash:ip counters
        ipset add c 192.0.2.1
        iptables -I INPUT -m set --match-set c src --bytes-gt 800 -j DROP
      
      if we now send packets from 192.0.2.1, bytes and packets counters
      for the entry as shown by 'ipset list' are always zero, and, no
      matter how many bytes we send, the rule will never match, because
      counters themselves are not updated.
      Reported-by: default avatarMithil Mhatre <mmhatre@redhat.com>
      Fixes: 4750005a ("netfilter: ipset: Fix "don't update counters" mode when counters used at the matching")
      Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
      Signed-off-by: default avatarJozsef Kadlecsik <kadlec@netfilter.org>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      7d10e62c
  5. 30 Oct, 2020 17 commits
  6. 29 Oct, 2020 3 commits
    • Linus Torvalds's avatar
      Merge tag 'fallthrough-fixes-clang-5.10-rc2' of... · 07e08873
      Linus Torvalds authored
      Merge tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
      
      Pull fallthrough fix from Gustavo A. R. Silva:
       "This fixes a ton of fall-through warnings when building with Clang
        12.0.0 and -Wimplicit-fallthrough"
      
      * tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
        include: jhash/signal: Fix fall-through warnings for Clang
      07e08873
    • Linus Torvalds's avatar
      Merge tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 934291ff
      Linus Torvalds authored
      Pull networking fixes from Jakub Kicinski:
       "Current release regressions:
      
         - r8169: fix forced threading conflicting with other shared
           interrupts; we tried to fix the use of raise_softirq_irqoff from an
           IRQ handler on RT by forcing hard irqs, but this driver shares
           legacy PCI IRQs so drop the _irqoff() instead
      
         - tipc: fix memory leak caused by a recent syzbot report fix to
           tipc_buf_append()
      
        Current release - bugs in new features:
      
         - devlink: Unlock on error in dumpit() and fix some error codes
      
         - net/smc: fix null pointer dereference in smc_listen_decline()
      
        Previous release - regressions:
      
         - tcp: Prevent low rmem stalls with SO_RCVLOWAT.
      
         - net: protect tcf_block_unbind with block lock
      
         - ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
           to only send legal frames to the hypervisor was too strict
      
         - net: hns3: Clear the CMDQ registers before unmapping BAR region;
           incorrect cleanup order was leading to a crash
      
         - bnxt_en - handful of fixes to fixes:
            - Send HWRM_FUNC_RESET fw command unconditionally, even if there
              are PCIe errors being reported
            - Check abort error state in bnxt_open_nic().
            - Invoke cancel_delayed_work_sync() for PFs also.
            - Fix regression in workqueue cleanup logic in bnxt_remove_one().
      
         - mlxsw: Only advertise link modes supported by both driver and
           device, after removal of 56G support from the driver 56G was not
           cleared from advertised modes
      
         - net/smc: fix suppressed return code
      
        Previous release - always broken:
      
         - netem: fix zero division in tabledist, caused by integer overflow
      
         - bnxt_en: Re-write PCI BARs after PCI fatal error.
      
         - cxgb4: set up filter action after rewrites
      
         - net: ipa: command payloads already mapped
      
        Misc:
      
         - s390/ism: fix incorrect system EID, it's okay to change since it
           was added in current release
      
         - vsock: use ns_capable_noaudit() on socket create to suppress false
           positive audit messages"
      
      * tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
        r8169: fix issue with forced threading in combination with shared interrupts
        netem: fix zero division in tabledist
        ibmvnic: fix ibmvnic_set_mac
        mptcp: add missing memory scheduling in the rx path
        tipc: fix memory leak caused by tipc_buf_append()
        gtp: fix an use-before-init in gtp_newlink()
        net: protect tcf_block_unbind with block lock
        ibmveth: Fix use of ibmveth in a bridge.
        net/sched: act_mpls: Add softdep on mpls_gso.ko
        ravb: Fix bit fields checking in ravb_hwtstamp_get()
        devlink: Unlock on error in dumpit()
        devlink: Fix some error codes
        chelsio/chtls: fix memory leaks in CPL handlers
        chelsio/chtls: fix deadlock issue
        net: hns3: Clear the CMDQ registers before unmapping BAR region
        bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.
        bnxt_en: Check abort error state in bnxt_open_nic().
        bnxt_en: Re-write PCI BARs after PCI fatal error.
        bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.
        bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().
        ...
      934291ff
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma · b9c0f4bd
      Linus Torvalds authored
      Pull rdma fixes from Jason Gunthorpe:
       "The good news is people are testing rc1 in the RDMA world - the bad
        news is testing of the for-next area is not as good as I had hoped, as
        we really should have caught at least the rdma_connect_locked() issue
        before now.
      
        Notable merge window regressions that didn't get caught/fixed in time
        for rc1:
      
         - Fix in kernel users of rxe, they were broken by the rapid fix to
           undo the uABI breakage in rxe from another patch
      
         - EFA userspace needs to read the GID table but was broken with the
           new GID table logic
      
         - Fix user triggerable deadlock in mlx5 using devlink reload
      
         - Fix deadlock in several ULPs using rdma_connect from the CM handler
           callbacks
      
         - Memory leak in qedr"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
        RDMA/qedr: Fix memory leak in iWARP CM
        RDMA: Add rdma_connect_locked()
        RDMA/uverbs: Fix false error in query gid IOCTL
        RDMA/mlx5: Fix devlink deadlock on net namespace deletion
        RDMA/rxe: Fix small problem in network_type patch
      b9c0f4bd