- 28 Apr, 2021 6 commits
-
-
Yang Li authored
Variable 'ret' is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: drivers/net/tun.c:3008:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1619603852-114996-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Maxim Kochetkov authored
Add downshift support for 88E1240, it uses the same downshift configuration registers as 88E1011. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20210428095356.621536-1-fido_max@inbox.ruSigned-off-by:
-
Colin Ian King authored
Currently the for-loop in ksz8_port_init_cnt is causing a static analysis infinite loop warning with the comparison of mib->cnt_ptr < dev->reg_mib_cnt. This occurs because mib->cnt_ptr is a u8 and dev->reg_mib_cnt is an int and the analyzer determines that mib->cnt_ptr potentially can wrap around to zero if the value in dev->reg_mib_cnt is > 255. However, this value is never this large, it is always less than 256 so make reg_mib_cnt a u8. Addresses-Coverity: ("Infinite loop") Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428120010.337959-1-colin.king@canonical.comSigned-off-by:
-
Roi Dayan authored
The assignment is not being used and redundant. The check for null is redundant as nf_conntrack_put() also checks this. Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20210428060532.3330974-1-roid@nvidia.comSigned-off-by:
-
Andreas Roeseler authored
The current definitions of constants for PROBE, currently defined only in the net-next kernel branch, are inconsistent, with some beginning with ICMP and others with simply EXT. This patch attempts to standardize the naming conventions of the constants for PROBE before their release into a stable Kernel, and to update the relevant definitions in net/ipv4/icmp.c. Similarly, the definitions for the code field (previously ICMP_EXT_MAL_QUERY, etc) use the same prefixes as the type field. This patch adds _CODE_ to the prefix to clarify the distinction of these constants. Signed-off-by:
Andreas Roeseler <andreas.a.roeseler@gmail.com> Acked-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210427153635.2591-1-andreas.a.roeseler@gmail.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-04-28 The main changes are: 1) Add link detach and following re-attach for trampolines, from Jiri Olsa. 2) Use kernel's "binary printf" lib for formatted output BPF helpers (which avoids the needs for variadic argument handling), from Florent Revest. 3) Fix verifier 64 to 32 bit min/max bound propagation, from Daniel Borkmann. 4) Convert cpumap to use netif_receive_skb_list(), from Lorenzo Bianconi. 5) Add generic batched-ops support to percpu array map, from Pedro Tammela. 6) Various CO-RE relocation BPF selftests fixes, from Andrii Nakryiko. 7) Misc doc rst fixes, from Hengqi Chen. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function bpf, docs: Fix literal block for example code bpf, cpumap: Bulk skb using netif_receive_skb_list bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds bpf: Lock bpf_trace_printk's tmp buf before it is written to selftests/bpf: Fix core_reloc test runner selftests/bpf: Fix field existence CO-RE reloc tests selftests/bpf: Fix BPF_CORE_READ_BITFIELD() macro libbpf: Support BTF_KIND_FLOAT during type compatibility checks in CO-RE selftests/bpf: Add remaining ASSERT_xxx() variants selftests/bpf: Use ASSERT macros in lsm test selftests/bpf: Test that module can't be unloaded with attached trampoline selftests/bpf: Add re-attach test to lsm test selftests/bpf: Add re-attach test to fexit_test selftests/bpf: Add re-attach test to fentry_test bpf: Allow trampoline re-attach for tracing and lsm programs ==================== Link: https://lore.kernel.org/r/20210427233740.22238-1-daniel@iogearbox.netSigned-off-by:
-
- 27 Apr, 2021 34 commits
-
-
Pedro Tammela authored
Follows the same logic as the hashtable tests. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210424214510.806627-3-pctammela@mojatatu.com
-
Pedro Tammela authored
Uses the already in-place infrastructure provided by the 'generic_map_*_batch' functions. No tweak was needed as it transparently handles the percpu variant. As arrays don't have delete operations, let it return a error to user space (default behaviour). Suggested-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Alexei Starovoitov authored
Florent Revest says: ==================== BPF's formatted output helpers are currently implemented with snprintf-like functions which use variadic arguments. The types of all arguments need to be known at compilation time. BPF_CAST_FMT_ARG casts all arguments to the size they should be (known at runtime), but the C type promotion rules cast them back to u64s. On 32 bit architectures, this can cause misaligned va_lists and generate mangled output. This series refactors these helpers to avoid variadic arguments. It uses a "binary printf" instead, where arguments are passed in a buffer constructed at runtime. --- Changes in v2: - Reworded the second patch's description to better describe how arguments get mangled on 32 bit architectures ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Florent Revest authored
BPF has three formatted output helpers: bpf_trace_printk, bpf_seq_printf and bpf_snprintf. Their signatures specify that all arguments are provided from the BPF world as u64s (in an array or as registers). All of these helpers are currently implemented by calling functions such as snprintf() whose signatures take a variable number of arguments, then placed in a va_list by the compiler to call vsnprintf(). "d9c9e4db bpf: Factorize bpf_trace_printk and bpf_seq_printf" introduced a bpf_printf_prepare function that fills an array of u64 sanitized arguments with an array of "modifiers" which indicate what the "real" size of each argument should be (given by the format specifier). The BPF_CAST_FMT_ARG macro consumes these arrays and casts each argument to its real size. However, the C promotion rules implicitely cast them all back to u64s. Therefore, the arguments given to snprintf are u64s and the va_list constructed by the compiler will use 64 bits for each argument. On 64 bit machines, this happens to work well because 32 bit arguments in va_lists need to occupy 64 bits anyway, but on 32 bit architectures this breaks the layout of the va_list expected by the called function and mangles values. In "88a5c690 bpf: fix bpf_trace_printk on 32 bit archs", this problem had been solved for bpf_trace_printk only with a "horrid workaround" that emitted multiple calls to trace_printk where each call had different argument types and generated different va_list layouts. One of the call would be dynamically chosen at runtime. This was ok with the 3 arguments that bpf_trace_printk takes but bpf_seq_printf and bpf_snprintf accept up to 12 arguments. Because this approach scales code exponentially, it is not a viable option anymore. Because the promotion rules are part of the language and because the construction of a va_list is an arch-specific ABI, it's best to just avoid variadic arguments and va_lists altogether. Thankfully the kernel's snprintf() has an alternative in the form of bstr_printf() that accepts arguments in a "binary buffer representation". These binary buffers are currently created by vbin_printf and used in the tracing subsystem to split the cost of printing into two parts: a fast one that only dereferences and remembers values, and a slower one, called later, that does the pretty-printing. This patch refactors bpf_printf_prepare to construct binary buffers of arguments consumable by bstr_printf() instead of arrays of arguments and modifiers. This gets rid of BPF_CAST_FMT_ARG and greatly simplifies the bpf_printf_prepare usage but there are a few gotchas that change how bpf_printf_prepare needs to do things. Currently, bpf_printf_prepare uses a per cpu temporary buffer as a generic storage for strings and IP addresses. With this refactoring, the temporary buffers now holds all the arguments in a structured binary format. To comply with the format expected by bstr_printf, certain format specifiers also need to be pre-formatted: %pB and %pi6/%pi4/%pI4/%pI6. Because vsnprintf subroutines for these specifiers are hard to expose, we pre-format these arguments with calls to snprintf(). Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Florent Revest <revest@chromium.org> Signed-off-by:
-
Florent Revest authored
Similarly to seq_buf_bprintf in lib/seq_buf.c, this function writes a printf formatted string with arguments provided in a "binary representation" built by functions such as vbin_printf. Signed-off-by:
-
Ignat Korchagin authored
efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues. Signed-off-by:
Ignat Korchagin <ignat@cloudflare.com> Fixes: e26ca4b5 ("sfc: reduce the number of requested xdp ev queues") Cc: <stable@vger.kernel.org> # 5.12.x Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lv Yunlong authored
In digital_tg_recv_dep_req, it calls nfc_tm_data_received(..,resp). If nfc_tm_data_received() failed, the callee will free the resp via kfree_skb() and return error. But in the exit branch, the resp will be freed again. My patch sets resp to NULL if nfc_tm_data_received() failed, to avoid the double free. Fixes: 1c7a4c24 ("NFC Digital: Add target NFC-DEP support") Signed-off-by:
Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add support for the catch-all set element. This special element can be used to define a default action to be applied in case that the set lookup returns no matching element. 2) Fix incorrect #ifdef dependencies in the nftables cgroupsv2 support, from Arnd Bergmann. ==================== Signed-off-by: -
Gong, Sishuai authored
l2tp_tunnel_register() registers a tunnel without fully initializing its attribute. This can allow another kernel thread running l2tp_xmit_core() to access the uninitialized data and then cause a kernel NULL pointer dereference error, as shown below. Thread 1 Thread 2 //l2tp_tunnel_register() list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list); //pppol2tp_connect() tunnel = l2tp_tunnel_get(sock_net(sk), info.tunnel_id); // Fetch the new tunnel ... //l2tp_xmit_core() struct sock *sk = tunnel->sock; ... bh_lock_sock(sk); //Null pointer error happens tunnel->sock = sk; Fix this bug by initializing tunnel->sock before adding the tunnel into l2tp_tunnel_list. Reviewed-by:Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Sishuai Gong <sishuai@purdue.edu> Reported-by:
-
Jiapeng Chong authored
Variable rc is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: net/smc/af_smc.c:1079:3: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
Variable err is set to -ENOMEM but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: net/mpls/af_mpls.c:1022:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
-
Jiapeng Chong authored
Variable rc is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: net/llc/llc_station.c:86:2: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
-
Jiapeng Chong authored
record is being initialized to ctx->open_record but this is never read as record is overwritten later on. Remove the redundant initialization. Cleans up the following clang-analyzer warning: net/tls/tls_device.c:421:26: warning: Value stored to 'record' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
-
Jiapeng Chong authored
Variable nr_sig is being assigned a value however the assignment is never read, so this redundant assignment can be removed. Cleans up the following clang-analyzer warning: net/rds/ib_send.c:297:2: warning: Value stored to 'nr_sig' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
-
David S. Miller authored
Oleksij Rempel says: ==================== microchip: add support for ksz88x3 driver family changes v8: - add Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> - fix build issue on "net: dsa: microchip: ksz8795: move register offsets and shifts to separate struct" changes v7: - Reverse christmas tree fixes - remove IS_88X3 and use chip_id instead - drop own tag and use DSA_TAG_PROTO_KSZ9893 instead changes v6: - take over this patch set - rebase against latest netdev-next and fix regressions - disable VLAN support for KSZ8863. KSZ8863's VLAN is not compatible to the KSZ8795's. So disable it for now and mainline it separately. This series adds support for the ksz88x3 driver family to the dsa based ksz drivers. The driver is making use of the already available ksz8795 driver and moves it to an generic driver for the ksz8 based chips which have similar functions but an totaly different register layout. The mainlining discussion history of this branch: v1: https://lore.kernel.org/netdev/20191107110030.25199-1-m.grzeschik@pengutronix.de/ v2: https://lore.kernel.org/netdev/20191218200831.13796-1-m.grzeschik@pengutronix.de/ v3: https://lore.kernel.org/netdev/20200508154343.6074-1-m.grzeschik@pengutronix.de/ v4: https://lore.kernel.org/netdev/20200803054442.20089-1-m.grzeschik@pengutronix.de/ v5: https://lore.kernel.org/netdev/20201207125627.30843-1-m.grzeschik@pengutronix.de/ ==================== Signed-off-by:
-
Michael Grzeschik authored
Microchip SMI0 Mode is a special mode, where the MDIO Read/Write commands are part of the PHY Address and the OP Code is always 0. We add the compatible for this special mode of the bitbanged mdio driver. Cc: devicetree@vger.kernel.org Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Michael Grzeschik authored
Add KSZ88X3 driver support. We add support for the KXZ88X3 three port switches using the Microchip SMI Interface. They are supported using the MDIO-Bitbang Interface. Signed-off-by:
-
Andrew Lunn authored
SMI0 is a mangled version of MDIO. The main low level difference is the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The read/write information is instead encoded in the PHY address. Extend the bit-bang code to allow the op code to be overridden, but default to normal C22 values. Add an extra compatible to the mdio-gpio driver, and when this compatible is present, set the op codes to 0. A higher level driver, sitting on top of the basic MDIO bus driver can then implement the rest of the microchip SMI0 odderties. Signed-off-by:
-
Michael Grzeschik authored
It is a 3-Port 10/100 Ethernet Switch. One CPU-Port and two Switch-Ports. Cc: devicetree@vger.kernel.org Reviewed-by:
-
Michael Grzeschik authored
Add KSZ88X3 driver support. We add support for the KXZ88X3 three port switches using the SPI Interface. Reviewed-by:
-
Oleksij Rempel authored
We add support for the ksz8863 and ksz8873 chips which are using the same register patterns but other offsets as the ksz8795. Signed-off-by:
-
Michael Grzeschik authored
In order to get this driver used with other switches the functions need to use different offsets and register shifts. This patch changes the direct use of the register defines to register description structures, which can be set depending on the chips register layout. Signed-off-by:
-
Michael Grzeschik authored
This patch moves the cpu interface selection code to a individual function specific for ksz8795. It will make it simpler to customize the code path for different switches supported by this driver. Signed-off-by:
-
Michael Grzeschik authored
The driver can be used on other chips of this type. To reflect this we rename the drivers prefix from ksz8795 to ksz8. Signed-off-by:
-
David S. Miller authored
Yangbo Lu says: ==================== Support Ocelot PTP Sync one-step timestamping This patch-set is to support Ocelot PTP Sync one-step timestamping. Actually before that, this patch-set cleans up and optimizes the DSA slave tx timestamp request handling process. Changes for v2: - Split tx timestamp optimization patch. - Updated doc patch. - Freed skb->cb usage in dsa core driver, and moved to device drivers. - Other minor fixes. Changes for v3: - Switched sequence of patch #3 and #4 with rebasing to fix build. - Replaced hard coded 48 of memset(skb->cb, 0, 48) with sizeof(). ==================== Signed-off-by: -
Yangbo Lu authored
Although HWTSTAMP_TX_ONESTEP_SYNC existed in ioctl for hardware timestamp configuration, the PTP Sync one-step timestamping had never been supported. This patch is to truely support it. - ocelot_port_txtstamp_request() This function handles tx timestamp request by storing ptp_cmd(tx timestamp type) in OCELOT_SKB_CB(skb)->ptp_cmd, and additionally for two-step timestamp storing ts_id in OCELOT_SKB_CB(clone)->ptp_cmd. - ocelot_ptp_rew_op() During xmit, this function is called to get rew_op (rewriter option) by checking skb->cb for tx timestamp request, and configure to transmitting. Non-onestep-Sync packet with one-step timestamp request falls back to use two-step timestamp. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Yangbo Lu authored
Convert to a common ocelot_port_txtstamp_request() for TX timestamp request handling. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
-
Yangbo Lu authored
Update timestamping doc for DSA switches to describe current implementation accurately. On TX, the skb cloning is no longer in DSA generic code. Signed-off-by:
-
Yangbo Lu authored
Free skb->cb usage in core driver and let device drivers decide to use or not. The reason having a DSA_SKB_CB(skb)->clone was because dsa_skb_tx_timestamp() which may set the clone pointer was called before p->xmit() which would use the clone if any, and the device driver has no way to initialize the clone pointer. This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning of dsa_slave_xmit(). Some new features in the future, like one-step timestamp may need more bytes of skb->cb to use in dsa_skb_tx_timestamp(), and p->xmit(). Signed-off-by:
-
Yangbo Lu authored
It was a waste to clone skb directly in dsa_skb_tx_timestamp(). For one-step timestamping, a clone was not needed. For any failure of port_txtstamp (this may usually happen), the skb clone had to be freed. So this patch moves skb cloning for tx timestamp out of dsa core, and let drivers clone skb in port_txtstamp if they really need. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Acked-by:
-
Yangbo Lu authored
Move ptp_classify_raw out of dsa core driver for handling tx timestamp request. Let device drivers do this if they want. Not all drivers want to limit tx timestamping for only PTP packet. Signed-off-by:
-
Yangbo Lu authored
Check tx timestamp request in core driver at very beginning of dsa_skb_tx_timestamp(), so that most skbs not requiring tx timestamp just return. And drop such checking in device drivers. Signed-off-by:
-
qhjindev authored
change 'privae' to 'private' Signed-off-by:
qhjindev <qhjin_dev@163.com> Signed-off-by:
-
Tobias Waldekranz authored
The .serdes_get_lane op used the magic value 0xff to indicate a valid SERDES lane and 0 signaled that a non-SERDES mode was set on the port. Unfortunately, "0" is also a valid lane ID, so even when these ports where configured to e.g. RGMII the driver would set them up as SERDES ports. - Replace 0xff with 0 to indicate a valid lane ID. The number is on the one hand just as arbitrary, but it is at least the first valid one and therefore less of a surprise. - Follow the other .serdes_get_lane implementations and return -ENODEV in the case where no SERDES is assigned to the port. Fixes: f5be107c ("net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185") Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
-
