v2: change the copyright ownership from "Nouveau Community" to myself, as per
Illia's recommendation.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Re-use the therm-exported fan structure with only two minor modifications:
- pwm_freq: u16 -> u32;
- add fan_type (toggle or PWM)

v2:
- Do not memset the table to 0 as it erases the pre-set default values
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The allocation algorithm doesn't expect there to be holes in the mm, which
causes its alignment/cutoff calculations to choke (and go negative) when
encountering the last chunk of a block before a hole.

The least expensive solution is to simply fill in any holes with nodes
that are pre-marked as being allocated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is really the wrong thing to do, but at the time it was our only
option to prevent worse issues.

We no longer cause quite so much anger from LTC, so it's not needed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The event source types/index might need to be derived from it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Merge tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel into drm-next

So here's the header cleanup, rebased on top of drm-next. Two new header
files are created here:

- drivers/gpu/drm/drm_internal.h for non-legacy drm.ko private
  declarations.

- include/drm/drm_legacy.h for legacy interfaces used by non-kms drivers.

And of course lots fo stuff gets shuffled into the already existing
drivers/gpu/drm/drm_legacy.h for drm.ko internal stuff.

topic branch smoke-tested in drm-intel-nightly for a bit. And the 0day
tester also worked through it (and found a few places I didn't add a
static to functions).

* tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel:
  drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.c
  drm: Move drm_class to drm_internal.h
  drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h>
  drm: Move legacy buffer structures to <drm/drm_legacy.h>
  drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h>
  drm: Purge ioctl forward declarations from drmP.h
  drm: unexport drm_global_mutex
  drm: Move piles of functions from drmP.h to drm_internal.h
  drm: Move vblank related module options into drm_irq.c
  drm: Drop drm_sysfs_class from drmP.h
  drm: Move __drm_pci_free to drm_legacy.h
  drm: Create drm legacy driver header
  drm: Move drm_legacy_vma_flush into drm_legacy.h
  drm: Move sg functions into drm_legacy.h
  drm: Move dma functions into drm_legacy.h

Only used in one place ever, so put it right next to that.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Unfortunately we can't move struct drm_lock_data easily since
it's embedded into struct drm_master. And figuring out where exactly
this struct should be allocated isn't that simple ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

A few odd cases:
- mgag200 someho had a totally unused drm_dma_handle_t. Remove it.
- i915 still uses the legacy pci dma alloc api, so grows an include.

Everything else fairly standard.

v2: Include "drm_legacy.h" in drm.ko source files for consistency.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

And replace the drm_core_ prefix with drm_legacy_ since really, this
isn't core stuff.

Also drop drm_core_dropmap since it's unused.

v2: Fix up i810.ko fully which somehow slipped through.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

If we push down the ioctl table in drm_ioctl.c all the forward
declarations in drmP.h are not required any more.

v2: Fold in fixup from Fenugguang Wu to declare functions as static.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Drivers really, really have no business even looking at this lock. And
thankfully they don't.

So unexport it and move the declaration to drm_internal.h.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This way drivers can't grow crazy ideas any more, and it also
helps a bit in reviewing EXPORT_SYMBOLS.

v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked
because exynos does some horrible stuff with it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This allows us to drop 2 header declarations from drmP.h. The 3rd one
is also used in drm_ioctl.c, so for that create a new drm_internal.h
header for non-legacy non-kms (since we have internal headers for
those parts already) declarations private to drm.ko.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

No user at all.

My guess is that this is a leftover from ttm before it used
the more abstract helpers to register/unregister its sysfs
objects (see drm_sysfs.h). At least in the existing history
it was never used.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Also sprinkle the customary legacy_ prefix.

Unfortunately we can't move the other functions since i915 is still
using them. Shame on me for that one :(

v2: Fix patch subject as spotted by David Herrmann.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

And move a few legayc functions to start things over there.

It compiles ...

Inspired by a patch from Dave Airlie, but with a split between drm.ko
private legacy functions and stuff used by drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Also sprinkle the drm_legacy_ prefix where missing.

v2: Drop extern from function declarations and include "drm_legacy.h"
in drm_scatter.c, spotted by David.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Also drop the unneeded EXPORT_SYMBOL and sprinkle drm_legacy_ prefixes
where missing.

v2: Drop the confusing _core_ and drop extern, both suggested by
David.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

So updated vblank-rework pull request, now with the polish that Mario
requested applied (and reviewed by him). Also with backmerge like you've
requested for easier merging.

The neat thing this finally allows is to immediately disable the vblank
interrupt on the last drm_vblank_put if the hardware has perfectly
accurate vblank counter and timestamp readout support. On i915 that
required piles of small adjustements from Ville since depending upon the
platform and port the vblank happens at different scanout lines.

Of course this is fully opt-in and per-device (we need that since gen2
doesn't have a hw vblank counter).

* tag 'topic/vblank-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel: (22 commits)
  drm: Clarify vblank ts/scanoutpos sampling #defines
  drm: Simplify return value of drm_get_last_vbltimestamp
  drm: Only update final vblank count when precise ts is available
  drm: Really never disable vblank irqs for offdelay==0
  drm: Use vblank_disable_and_save in drm_vblank_cleanup()
  drm: Remove drm_vblank_cleanup from drm_vblank_init error path.
  drm: Store the vblank timestamp when adjusting the counter during disable
  drm: Fix confusing debug message in drm_update_vblank_count()
  drm/i915: Update scanline_offset only for active crtcs
  drm: Kick start vblank interrupts at drm_vblank_on()
  drm/i915: Opt out of vblank disable timer on >gen2
  drm: Add dev->vblank_disable_immediate flag
  drm: Disable vblank interrupt immediately when drm_vblank_offdelay<0
  drm: Fix race between drm_vblank_off() and drm_queue_vblank_event()
  drm: Fix deadlock between event_lock and vbl_lock/vblank_time_lock
  drm: Reduce the amount of dev->vblank[crtc] in the code
  drm: Avoid random vblank counter jumps if the hardware counter has been reset
  drm: Have the vblank counter account for the time between vblank irq disable and drm_vblank_off()
  drm: Move drm_update_vblank_count()
  drm: Don't clear vblank timestamps when vblank interrupt is disabled
  ...

This fixes problems on ppc64 platforms, where we could end up using
a WC mapping for migrating BOs with memcpy, when really we want to
use cached memory.
Tested-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Just move this into a separate header file, and make the
two users use it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

concurrent buffer reads.

* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: allow concurrent buffer reads
  drm/radeon: add the infrastructure for concurrent buffer access
  drm/ttm: allow fence to be added as shared

The userspace drm.h include doesn't prefix the drm directory.  This can lead
to compile failures as /usr/include/drm/ isn't in the standard gcc include
paths.  Fix it to be <drm/drm.h>, which matches the rest of the driver drm
header files that get installed into /usr/include/drm.

Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1138759

Fixes: 1d7a5cbfReported-by: Jeffrey Bastian <jbastian@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This allows us to specify if we want to sync to
the shared fences of a reservation object or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch adds a new flag to the ttm_validate_buffer list to
add the fence as shared to the reservation object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts, just a few
things changed right next to each another.

Conflicts:
	drivers/gpu/drm/drm_irq.c
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

I've read INVBL as "invalid backlight" and got mightly confused.
The #defines are already fairly long and we can afford to extend
them a bit more without resulting in ugly code all over.

I'm not sure how useful the complicated bitmask return value of these
functions really are since no one checks them. But for now let's keep
things as is.

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>