* topic/caiaq:
  ALSA: snd_usb_caiaq: set mixername

* topic/asoc:
  ASoC: Fix lm4857 control

alsamixer and friends want the mixername to be set. Even though the
driver does not exports a real mixer device, export the name doesn't
harm.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 4eaa9819 changed semantics of
private_value member of kcontrol. This resulted in inability to control
amplifier and subsequently in very low output volume.
Tested-by: Johannes Schauer <josch@pyneo.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

* topic/usb-audio:
  ALSA: usb - Add boot quirk for C-Media 6206 USB Audio
  ALSA: usb-audio - errata corrige for quirk
  ALSA: usb-audio - Add quirk for Roland/Edirol M-16DX
  ALSA: usb-audio - quirk for USB Aureon cards

* topic/seq-kconfig-cleanup:
  ALSA: clean up the logic for building sequencer modules

* topic/section-fix:
  ALSA: Add missing __devexit_p() markers
  ALSA: powermac - Replace the rest of __init*
  ALSA: sound/ppc: update annotations of serveral functions

* topic/sc6000:
  ALSA: sc6000: enable joystick port
  ALSA: sc6000: fix older card initialization
  ALSA: sc6000: add support for SC-6600 and SC-7000

* topic/riptide:
  ALSA: riptide - Fix joystick resource handling
  ALSA: riptide - Code clean up

* topic/pcm-subclass-fix:
  ALSA: Remove invalid GENERIC_MIX PCM sublass

* topic/pcm-jiffies-check:
  ALSA: pcm - A helper function to compose PCM stream name for debug prints
  ALSA: pcm - Fix update of runtime->hw_ptr_interrupt
  ALSA: pcm - Fix a typo in hw_ptr update check
  ALSA: PCM midlevel: lower jiffies check margin using runtime->delay value
  ALSA: PCM midlevel: Do not update hw_ptr_jiffies when hw_ptr is not changed
  ALSA: PCM midlevel: introduce mask for xrun_debug() macro
  ALSA: PCM midlevel: improve fifo_size handling

* topic/pcm-delay:
  ALSA: usbaudio - Add delay account
  ALSA: Add extra delay count in PCM

* topic/oxygen:
  sound: virtuoso: add Xonar Essence ST support
  sound: virtuoso: enable HDAV S/PDIF input
  sound: virtuoso: add another DX PCI ID
  sound: oxygen: reset DMA when stream is closed

* topic/misc:
  ALSA: sgio2audio.c: clean up checking
  ALSA: burgundy: timeout message is off by one.
  ALSA: bt87x - Add a quirk entry for Askey Computer Corp. MagicTView'99
  ALSA: parisc/harmony: fix printk format warning
  ALSA: keywest: Get rid of useless i2c_device_name() macro

* topic/maya44:
  ALSA: ice1724 - Add ESI Maya44 support
  ALSA: ice1724 - Allow spec driver to create own routing controls
  ALSA: ice1724 - Add PCI postint to reset sequence
  ALSA: ice1724 - Clean up definitions of DMA records
  ALSA: ice1724 - Check error in set_rate function

* topic/lx6464es:
  ALSA: Add missing description of lx6464es to ALSA-Configuration.txt
  ALSA: lx6464es - Disable lx_message_send()
  ALSA: lx6464es - Use snd_card_create()
  ALSA: lx6464es - driver for the digigram lx6464es interface

* topic/hdsp:
  ALSA: hdsp - Add a comment about external firmwares for hdsp
  ALSA: hdsp: allow firmware loading from inside the kernel

* topic/hda: (51 commits)
  ALSA: hda - Fix the previous tagra-8ch patch
  ALSA: hda - Add 7.1 support for MSI GX620
  ALSA: support Sony Vaio TT
  ALSA: hda_intel: fix build error when !PM
  ALSA: hda - More Aspire 8930G fixes
  ALSA: hda - Acer Aspire 8930G support
  ALSA: hda - Limit codec-verb retry to limited hardwares
  ALSA: hda - Add codec bus reset and verb-retry at critical errors
  ALSA: hda - Reorder and clean-up ALC268 quirk table
  ALSA: hda - fix audio on LG R510
  ALSA: hda - Macbook[Pro] 5 6ch support
  ALSA: hda-intel: improve initialization for ALC262_HP_BPC model
  ALSA: hda - Jack Mode changes for Sigmatel boards
  ALSA: hda - Support NVIDIA 8 channel HDMI audio
  ALSA: hda - Fix a typo in the previous patch
  ALSA: hda - Fix reverted LED setup for HP
  ALSA: hda - Add more register bits definitions
  ALSA: hda - Always sync writes in single_cmd mode
  ALSA: hda - Support sync after writing a verb
  ALSA: hda - Allow concurrent RIRB access in single_cmd mode
  ...

* topic/emu10k1:
  ALSA: emu10k1 - Fix minimum periods for efx playback

* topic/div64-cleanup:
  ALSA: Clean up 64bit division functions

* topic/ctxfi: (35 commits)
  ALSA: ctxfi - Clear PCM resources at hw_params and hw_free
  ALSA: ctxfi - Check the presence of SRC instance in PCM pointer callbacks
  ALSA: ctxfi - Add missing start check in atc_pcm_playback_start()
  ALSA: ctxfi - Add use_system_timer module option
  ALSA: ctxfi - Fix wrong model id for UAA
  ALSA: ctxfi - Clean up probe routines
  ALSA: ctxfi - Fix / clean up hw20k2 chip code
  ALSA: ctxfi - Fix possible buffer pointer overrun
  ALSA: ctxfi - Remove useless initializations and cast
  ALSA: ctxfi - Fix DMA mask for emu20k2 chip
  ALSA: ctxfi - Make volume controls more intuitive
  ALSA: ctxfi - Optimize the native timer handling using wc counter
  ALSA: ctxfi - Add missing inclusion of linux/math64.h
  ALSA: ctxfi - Set device 0 for mixer control elements
  ALSA: ctxfi - Clean up / optimize
  ALSA: ctxfi - Set periods_min to 2
  ALSA: ctxfi - Use native timer interrupt on emu20k1
  ALSA: ctxfi - Fix previous fix for 64bit DMA
  ALSA: ctxfi - Fix endian-dependent codes
  ALSA: ctxfi - Allow 64bit DMA
  ...

* topic/core-id-check:
  ALSA: Core - clean up snd_card_set_id* calls and remove possible id collision
  ALSA: Fix double locking of card list in snd_card_register()

* topic/cleanup:
  ALSA: Remove deprecated include/sound/driver.h
  ALSA: Remove deprecated snd_card_new()

* topic/caiaq:
  ALSA: snd_usb_caiaq: bump version number
  ALSA: snd_usb_caiaq: give better shortname
  ALSA: Core - add snd_card_set_id() function
  ALSA: snd_usb_caiaq: give better longname
  ALSA: snd_usb_caiaq: use strlcpy
  ALSA: snd_usb_caiaq: clean whitespaces

* topic/ca0106:
  ALSA: ca0106 - Fix master volume scale
  ALSA: ca0106 - Add missing card->mixername field setup
  ALSA: ca0106 - Add missing registrations of vmaster controls

* topic/au88x0:
  ALSA: au88x0: fix wrong period_elapsed() call
  ALSA: au88x0: fix .pointer callback

* topic/asoc: (135 commits)
  ASoC: Apostrophe patrol
  ASoC: codec tlv320aic23 fix bogus divide by 0 message
  ASoC: fix NULL pointer dereference in soc_suspend()
  ASoC: Fix build error in twl4030.c
  ASoC: SSM2602: assign last substream to the master when shutting down
  ASoC: Blackfin: document how anomaly 05000250 is handled
  ASoC: Blackfin: set the transfer size according the ac97_frame size
  ASoC: SSM2602: remove unsupported sample rates
  ASoC: TWL4030: Check the interface format for 4 channel mode
  ASoC: TWL4030: Use reg_cache in twl4030_init_chip
  ASoC: Initialise dev for the dummy S/PDIF DAI
  ASoC: Add dummy S/PDIF codec support
  ASoC: correct print specifiers for unsigneds
  ASoC: Modify mpc5200 AC97 driver to use V9 of spin_event_timeout()
  ASoC: Switch FSL SSI DAI over to symmetric_rates
  ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolved
  ASoC: Fabric bindings for STAC9766 on the Efika
  ASoC: Support for AC97 on Phytec pmc030 base board.
  ASoC: AC97 driver for mpc5200
  ASoC: Main rewite of the mpc5200 audio DMA code
  ...

There's a bug in the mxser kernel module that still appears in the
2.6.29.4 kernel.

mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the
not of the ioaddr, you're effectively passing 0 which means it won't be
able to talk to an ISA card.  I have tested this, and removing the !
fixes the problem.

Cc: "Peter Botha" <peterb@goldcircle.co.za>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit code, we scan buffers attached to a transaction.  During this
scan, we sometimes have to drop j_list_lock and then we recheck whether
the journal buffer head didn't get freed by journal_try_to_free_buffers().
 But checking for buffer_jbd(bh) isn't enough because a new journal head
could get attached to our buffer head.  So add a check whether the journal
head remained the same and whether it's still at the same transaction and
list.

This is a nasty bug and can cause problems like memory corruption (use after
free) or trigger various assertions in JBD code (observed).
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <stable@kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The recent ->lookup() deadlock correction required the directory inode
mutex to be dropped while waiting for expire completion.  We were
concerned about side effects from this change and one has been identified.

I saw several error messages.

They cause autofs to become quite confused and don't really point to the
actual problem.

Things like:

handle_packet_missing_direct:1376: can't find map entry for (43,1827932)

which is usually totally fatal (although in this case it wouldn't be
except that I treat is as such because it normally is).

do_mount_direct: direct trigger not valid or already mounted
/test/nested/g3c/s1/ss1

which is recoverable, however if this problem is at play it can cause
autofs to become quite confused as to the dependencies in the mount tree
because mount triggers end up mounted multiple times.  It's hard to
accurately check for this over mounting case and automount shouldn't need
to if the kernel module is doing its job.

There was one other message, similar in consequence of this last one but I
can't locate a log example just now.

When checking if a mount has already completed prior to adding a new mount
request to the wait queue we check if the dentry is hashed and, if so, if
it is a mount point.  But, if a mount successfully completed while we
slept on the wait queue mutex the dentry must exist for the mount to have
completed so the test is not really needed.

Mounts can also be done on top of a global root dentry, so for the above
case, where a mount request completes and the wait queue entry has already
been removed, the hashed test returning false can cause an incorrect
callback to the daemon.  Also, d_mountpoint() is not sufficient to check
if a mount has completed for the multi-mount case when we don't have a
real mount at the base of the tree.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The massive nommu update (8feae131) resulted in these warnings:
ipc/shm.c: In function `sys_shmdt':
ipc/shm.c:974: warning: unused variable `size'
ipc/shm.c:972: warning: unused variable `next'
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  kvm: fix kvm reboot crash when MAXSMP is used
  cpumask: alloc zeroed cpumask for static cpumask_var_ts
  cpumask: introduce zalloc_cpumask_var

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  bsg: setting rq->bio to NULL

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  cls_cgroup: Fix oops when user send improperly 'tc filter add' request
  r8169: fix crash when large packets are received

* 'for-linus' of git://neil.brown.name/md:
  md/raid5: fix bug in reshape code when chunk_size decreases.
  md/raid5 - avoid deadlocks in get_active_stripe during reshape
  md/raid5: use conf->raid_disks in preference to mddev->raid_disk

Due to commit 1cd96c24 ("block: WARN
in __blk_put_request() for potential bio leak"), BSG SMP requests get
the false warnings:

WARNING: at block/blk-core.c:1068 __blk_put_request+0x52/0xc0()

This sets rq->bio to NULL to avoid that false warnings.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

one system was found there is crash during reboot then kvm/MAXSMP
Sending all processes the KILL signal...                              done
Please stand by while rebooting the system...
[ 1721.856538] md: stopping all md devices.
[ 1722.852139] kvm: exiting hardware virtualization
[ 1722.854601] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1722.872219] IP: [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4
[ 1722.877955] PGD 0
[ 1722.880042] Oops: 0000 [#1] SMP
[ 1722.892548] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:2:0/0:2:0:0/vendor
[ 1722.900977] CPU 9
[ 1722.912606] Modules linked in:
[ 1722.914226] Pid: 0, comm: swapper Not tainted 2.6.30-rc7-tip-01843-g2305324-dirty #299 ...
[ 1722.932589] RIP: 0010:[<ffffffff8102c6b6>]  [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4
[ 1722.942709] RSP: 0018:ffffc900010b6ed8  EFLAGS: 00010046
[ 1722.956121] RAX: 0000000000000000 RBX: ffffc9000e253140 RCX: 0000000000000009
[ 1722.972202] RDX: 000000000000b020 RSI: ffffc900010c3220 RDI: ffffffffffffd790
[ 1722.977399] RBP: ffffc900010b6f08 R08: 0000000000000000 R09: 0000000000000000
[ 1722.995149] R10: 00000000000004b8 R11: 966912b6c78fddbd R12: 0000000000000009
[ 1723.011551] R13: 000000000000b020 R14: 0000000000000009 R15: 0000000000000000
[ 1723.019898] FS:  0000000000000000(0000) GS:ffffc900010b3000(0000) knlGS:0000000000000000
[ 1723.034389] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1723.041164] CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006e0
[ 1723.056192] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1723.072546] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1723.080562] Process swapper (pid: 0, threadinfo ffff88107e464000, task ffff88047e5a2550)
[ 1723.096144] Stack:
[ 1723.099071]  0000000000000046 ffffc9000e253168 966912b6c78fddbd ffffc9000e253140
[ 1723.115471]  ffff880c7d4304d0 ffffc9000e253168 ffffc900010b6f28 ffffffff81011022
[ 1723.132428]  ffffc900010b6f48 966912b6c78fddbd ffffc900010b6f48 ffffffff8100b83b
[ 1723.141973] Call Trace:
[ 1723.142981]  <IRQ> <0> [<ffffffff81011022>] kvm_arch_hardware_disable+0x26/0x3c
[ 1723.158153]  [<ffffffff8100b83b>] hardware_disable+0x3f/0x55
[ 1723.172168]  [<ffffffff810b95f6>] generic_smp_call_function_interrupt+0x76/0x13c
[ 1723.178836]  [<ffffffff8104cbea>] smp_call_function_interrupt+0x3a/0x5e
[ 1723.194689]  [<ffffffff81035bf3>] call_function_interrupt+0x13/0x20
[ 1723.199750]  <EOI> <0> [<ffffffff814ad3b4>] ? acpi_idle_enter_c1+0xd3/0xf4
[ 1723.217508]  [<ffffffff814ad3ae>] ? acpi_idle_enter_c1+0xcd/0xf4
[ 1723.232172]  [<ffffffff814ad4bc>] ? acpi_idle_enter_bm+0xe7/0x2ce
[ 1723.235141]  [<ffffffff81a8d93f>] ? __atomic_notifier_call_chain+0x0/0xac
[ 1723.253381]  [<ffffffff818c3dff>] ? menu_select+0x58/0xd2
[ 1723.258179]  [<ffffffff818c2c9d>] ? cpuidle_idle_call+0xa4/0xf3
[ 1723.272828]  [<ffffffff81034085>] ? cpu_idle+0xb8/0x101
[ 1723.277085]  [<ffffffff81a80163>] ? start_secondary+0x1bc/0x1d7
[ 1723.293708] Code: b0 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 48 8b 04 cd 30 ee 27 82 49 89 cc 49 89 d5 48 8b 04 10 48 8d b8 90 d7 ff ff <48> 8b 87 70 28 00 00 48 8d 98 90 d7 ff ff eb 16 e8 e9 fe ff ff
[ 1723.335524] RIP  [<ffffffff8102c6b6>] hardware_disable+0x4c/0xb4
[ 1723.342076]  RSP <ffffc900010b6ed8>
[ 1723.352021] CR2: 0000000000000000
[ 1723.354348] ---[ end trace e2aec53dae150aa1 ]---

it turns out that we need clear cpus_hardware_enabled in that case.
Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

These are defined as static cpumask_var_t so if MAXSMP is not used,
they are cleared already.  Avoid surprises when MAXSMP is enabled.
Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

So can get cpumask_var with cpumask_clear
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>