- 18 Aug, 2023 40 commits
-
-
Yang Li authored
Add description of @mm_wr_locked and @mm. to silence the warnings: mm/memory.c:1716: warning: Function parameter or member 'mm_wr_locked' not described in 'unmap_vmas' mm/memory.c:5110: warning: Function parameter or member 'mm' not described in 'mm_account_fault' Link: https://lkml.kernel.org/r/20230707090034.125511-1-yang.lee@linux.alibaba.comSigned-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Kemeng Shi authored
Commit 2aff7a47 ("mm: Convert page_vma_mapped_walk to work on PFNs") replaced page with pfns in page_vma_mapped_walk structure and updated "@pvmw->page" to "@pvmw->pfn" in comment of function page_vma_mapped_walk. This patch update stale "page" to "pfn" in comment of check_pte. Link: https://lkml.kernel.org/r/20230707153953.1380615-1-shikemeng@huaweicloud.comSigned-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
David Howells authored
Fscache has an optimisation by which reads from the cache are skipped until we know that (a) there's data there to be read and (b) that data isn't entirely covered by pages resident in the netfs pagecache. This is done with two flags manipulated by fscache_note_page_release(): if (... test_bit(FSCACHE_COOKIE_HAVE_DATA, &cookie->flags) && test_bit(FSCACHE_COOKIE_NO_DATA_TO_READ, &cookie->flags)) clear_bit(FSCACHE_COOKIE_NO_DATA_TO_READ, &cookie->flags); where the NO_DATA_TO_READ flag causes cachefiles_prepare_read() to indicate that netfslib should download from the server or clear the page instead. The fscache_note_page_release() function is intended to be called from ->releasepage() - but that only gets called if PG_private or PG_private_2 is set - and currently the former is at the discretion of the network filesystem and the latter is only set whilst a page is being written to the cache, so sometimes we miss clearing the optimisation. Fix this by following Willy's suggestion[1] and adding an address_space flag, AS_RELEASE_ALWAYS, that causes filemap_release_folio() to always call ->release_folio() if it's set, even if PG_private or PG_private_2 aren't set. Note that this would require folio_test_private() and page_has_private() to become more complicated. To avoid that, in the places[*] where these are used to conditionalise calls to filemap_release_folio() and try_to_release_page(), the tests are removed the those functions just jumped to unconditionally and the test is performed there. [*] There are some exceptions in vmscan.c where the check guards more than just a call to the releaser. I've added a function, folio_needs_release() to wrap all the checks for that. AS_RELEASE_ALWAYS should be set if a non-NULL cookie is obtained from fscache and cleared in ->evict_inode() before truncate_inode_pages_final() is called. Additionally, the FSCACHE_COOKIE_NO_DATA_TO_READ flag needs to be cleared and the optimisation cancelled if a cachefiles object already contains data when we open it. [dwysocha@redhat.com: call folio_mapping() inside folio_needs_release()] Link: https://github.com/DaveWysochanskiRH/kernel/commit/902c990e311120179fa5de99d68364b2947b79ec Link: https://lkml.kernel.org/r/20230628104852.3391651-3-dhowells@redhat.com Fixes: 1f67e6d0 ("fscache: Provide a function to note the release of a page") Fixes: 047487c9 ("cachefiles: Implement the I/O routines") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Reported-by:
Rohith Surabattula <rohiths.msft@gmail.com> Suggested-by:
SeongJae Park <sj@kernel.org> Cc: Daire Byrne <daire.byrne@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steve French <sfrench@samba.org> Cc: Shyam Prasad N <nspmangalore@gmail.com> Cc: Rohith Surabattula <rohiths.msft@gmail.com> Cc: Dave Wysochanski <dwysocha@redhat.com> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jingbo Xu <jefflexu@linux.alibaba.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Xiubo Li <xiubli@redhat.com> Signed-off-by:
-
David Howells authored
Patch series "mm, netfs, fscache: Stop read optimisation when folio removed from pagecache", v7. This fixes an optimisation in fscache whereby we don't read from the cache for a particular file until we know that there's data there that we don't have in the pagecache. The problem is that I'm no longer using PG_fscache (aka PG_private_2) to indicate that the page is cached and so I don't get a notification when a cached page is dropped from the pagecache. The first patch merges some folio_has_private() and filemap_release_folio() pairs and introduces a helper, folio_needs_release(), to indicate if a release is required. The second patch is the actual fix. Following Willy's suggestions[1], it adds an AS_RELEASE_ALWAYS flag to an address_space that will make filemap_release_folio() always call ->release_folio(), even if PG_private/PG_private_2 aren't set. folio_needs_release() is altered to add a check for this. This patch (of 2): Make filemap_release_folio() check folio_has_private(). Then, in most cases, where a call to folio_has_private() is immediately followed by a call to filemap_release_folio(), we can get rid of the test in the pair. There are a couple of sites in mm/vscan.c that this can't so easily be done. In shrink_folio_list(), there are actually three cases (something different is done for incompletely invalidated buffers), but filemap_release_folio() elides two of them. In shrink_active_list(), we don't have have the folio lock yet, so the check allows us to avoid locking the page unnecessarily. A wrapper function to check if a folio needs release is provided for those places that still need to do it in the mm/ directory. This will acquire additional parts to the condition in a future patch. After this, the only remaining caller of folio_has_private() outside of mm/ is a check in fuse. Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.comReported-by:
-
Matthew Wilcox (Oracle) authored
The lone caller already has the folio, so pass it in instead of deriving it from the page again. Link: https://lkml.kernel.org/r/20230706195251.2707542-1-willy@infradead.orgSigned-off-by:
-
Pintu Kumar authored
CMA allocation can happen either from global cma or from dedicated cma region. Thus it is helpful to print cma name as well during initial debugging to confirm cma regions were getting initialized or not. Link: https://lkml.kernel.org/r/1688668414-12350-1-git-send-email-quic_pintu@quicinc.comSigned-off-by:
Pintu Kumar <quic_pintu@quicinc.com> Signed-off-by:
Pintu Agarwal <pintu.ping@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Miaohe Lin authored
Since commit 01b44456 ("mm/page_alloc: replace local_lock with normal spinlock"), per_cpu_pages is protected by normal spinlock. Remove the obsolete comment as it's not that helpful. Link: https://lkml.kernel.org/r/20230706092441.1574950-1-linmiaohe@huawei.comSigned-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
It appears that destroy_memory_type() isn't a very good name because we usually will not free the memory_type here. So rename it to a more appropriate name i.e. put_memory_type(). Link: https://lkml.kernel.org/r/20230706063905.543800-1-linmiaohe@huawei.comSigned-off-by:
Huang, Ying <ying.huang@intel.com> Reviewed-by:
Xiao Yang <yangx.jy@fujitsu.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
-
Jeff Xu authored
Add selftest for sysctl vm.memfd_noexec is 2 (MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED) memfd_create(.., MFD_EXEC) should fail in this case. Link: https://lkml.kernel.org/r/20230705063315.3680666-3-jeffxu@google.comReported-by:
Dominique Martinet <asmadeus@codewreck.org> Closes: https://lore.kernel.org/linux-mm/CABi2SkXUX_QqTQ10Yx9bBUGpN1wByOi_=gZU6WEy5a8MaQY3Jw@mail.gmail.com/T/Signed-off-by:
Jeff Xu <jeffxu@google.com> Cc: Daniel Verkamp <dverkamp@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Kees Cook <keescook@chromium.org> Cc: kernel test robot <lkp@intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Jeff Xu authored
Patch series "mm/memfd: fix sysctl MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED", v2. When sysctl vm.memfd_noexec is 2 (MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED), memfd_create(.., MFD_EXEC) should fail. This complies with how MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED is defined - "memfd_create() without MFD_NOEXEC_SEAL will be rejected" Thanks to Dominique Martinet <asmadeus@codewreck.org> who reported the bug. see [1] for context. [1] https://lore.kernel.org/linux-mm/CABi2SkXUX_QqTQ10Yx9bBUGpN1wByOi_=gZU6WEy5a8MaQY3Jw@mail.gmail.com/T/ This patch (of 2): When vm.memfd_noexec is 2 (MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED), memfd_create(.., MFD_EXEC) should fail. This complies with how MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED is defined - "memfd_create() without MFD_NOEXEC_SEAL will be rejected" Link: https://lkml.kernel.org/r/20230705063315.3680666-1-jeffxu@google.com Link: https://lkml.kernel.org/r/20230705063315.3680666-2-jeffxu@google.com Fixes: 105ff533 ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306301351.kkbSegQW-lkp@intel.com/Signed-off-by:
-
Andrew Yang authored
We expect a file page access after dropping caches should be a major fault, but sometimes it's still a minor fault. That's because a file page can't be dropped if it's in a per-cpu pagevec. Draining all pages from per-cpu pagevec to lru list before trying to drop caches. Link: https://lkml.kernel.org/r/20230630092203.16080-1-andrew.yang@mediatek.comSigned-off-by:
Andrew Yang <andrew.yang@mediatek.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Michal Hocko authored
kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been deprecated since 58056f77 ("memcg, kmem: further deprecate kmem.limit_in_bytes") merged in 5.16. We haven't heard about any serious users since then but it seems that the mere presence of the file is causing more harm thatn good. We (SUSE) have had several bug reports from customers where Docker based containers started to fail because a write to kmem.limit_in_bytes has failed. This was unexpected because runc code only expects ENOENT (kmem disabled) or EBUSY (tasks already running within cgroup). So a new error code was unexpected and the whole container startup failed. This has been later addressed by https://github.com/opencontainers/runc/commit/52390d68040637dfc77f9fda6bbe70952423d380 so current Docker runtimes do not suffer from the problem anymore. There are still older version of Docker in use and likely hard to get rid of completely. Address this by wiping out the file completely and effectively get back to pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration. I would recommend backporting to stable trees which have picked up 58056f77 ("memcg, kmem: further deprecate kmem.limit_in_bytes"). [mhocko@suse.com: restore _KMEM switch case] Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <muchun.song@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Miaohe Lin authored
If pfn is outside zone boundaries in the first round, ret will be set to 1. But if pfn is changed to inside the zone boundaries in zone span seqretry path, ret is still set to 1 leading to false page outside zone error info. This is from code inspection. The race window should be really small thus hard to trigger in real world. [akpm@linux-foundation.org: code simplification, per Matthew] Link: https://lkml.kernel.org/r/20230704111823.940331-1-linmiaohe@huawei.com Fixes: bdc8cb98 ("[PATCH] memory hotplug locking: zone span seqlock") Signed-off-by:
-
xu xin authored
Add a function test_unmerge_zero_page() to test the functionality on unsharing and counting ksm-placed zero pages and counting of this patch series. test_unmerge_zero_page() actually contains four subjct test objects: (1) whether the count of ksm zero pages can update correctly after merging; (2) whether the count of ksm zero pages can update correctly after unmerging by madvise(...MADV_UNMERGEABLE); (3) whether the count of ksm zero pages can update correctly after unmerging by triggering write fault. (4) whether ksm zero pages are really unmerged. Link: https://lkml.kernel.org/r/20230613030947.186089-1-yang.yang29@zte.com.cnSigned-off-by:xu xin <xu.xin16@zte.com.cn> Acked-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Xiaokai Ran <ran.xiaokai@zte.com.cn> Reviewed-by:
Yang Yang <yang.yang29@zte.com.cn> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn> Signed-off-by:
-
xu xin authored
When use_zero_pages is enabled, the calculation of ksm profit is not correct because ksm zero pages is not counted in. So update the calculation of KSM profit including the documentation. Link: https://lkml.kernel.org/r/20230613030942.186041-1-yang.yang29@zte.com.cnSigned-off-by:
-
xu xin authored
As the number of ksm zero pages is not included in ksm_merging_pages per process when enabling use_zero_pages, it's unclear of how many actual pages are merged by KSM. To let users accurately estimate their memory demands when unsharing KSM zero-pages, it's necessary to show KSM zero- pages per process. In addition, it help users to know the actual KSM profit because KSM-placed zero pages are also benefit from KSM. since unsharing zero pages placed by KSM accurately is achieved, then tracking empty pages merging and unmerging is not a difficult thing any longer. Since we already have /proc/<pid>/ksm_stat, just add the information of 'ksm_zero_pages' in it. Link: https://lkml.kernel.org/r/20230613030938.185993-1-yang.yang29@zte.com.cnSigned-off-by:
-
xu xin authored
As pages_sharing and pages_shared don't include the number of zero pages merged by KSM, we cannot know how many pages are zero pages placed by KSM when enabling use_zero_pages, which leads to KSM not being transparent with all actual merged pages by KSM. In the early days of use_zero_pages, zero-pages was unable to get unshared by the ways like MADV_UNMERGEABLE so it's hard to count how many times one of those zeropages was then unmerged. But now, unsharing KSM-placed zero page accurately has been achieved, so we can easily count both how many times a page full of zeroes was merged with zero-page and how many times one of those pages was then unmerged. and so, it helps to estimate memory demands when each and every shared page could get unshared. So we add ksm_zero_pages under /sys/kernel/mm/ksm/ to show the number of all zero pages placed by KSM. Meanwhile, we update the Documentation. Link: https://lkml.kernel.org/r/20230613030934.185944-1-yang.yang29@zte.com.cnSigned-off-by:
-
xu xin authored
Patch series "ksm: support tracking KSM-placed zero-pages", v10. The core idea of this patch set is to enable users to perceive the number of any pages merged by KSM, regardless of whether use_zero_page switch has been turned on, so that users can know how much free memory increase is really due to their madvise(MERGEABLE) actions. But the problem is, when enabling use_zero_pages, all empty pages will be merged with kernel zero pages instead of with each other as use_zero_pages is disabled, and then these zero-pages are no longer monitored by KSM. The motivations to do this is seen at: https://lore.kernel.org/lkml/202302100915227721315@zte.com.cn/ In one word, we hope to implement the support for KSM-placed zero pages tracking without affecting the feature of use_zero_pages, so that app developer can also benefit from knowing the actual KSM profit by getting KSM-placed zero pages to optimize applications eventually when /sys/kernel/mm/ksm/use_zero_pages is enabled. This patch (of 5): When use_zero_pages of ksm is enabled, madvise(addr, len, MADV_UNMERGEABLE) and other ways (like write 2 to /sys/kernel/mm/ksm/run) to trigger unsharing will *not* actually unshare the shared zeropage as placed by KSM (which is against the MADV_UNMERGEABLE documentation). As these KSM-placed zero pages are out of the control of KSM, the related counts of ksm pages don't expose how many zero pages are placed by KSM (these special zero pages are different from those initially mapped zero pages, because the zero pages mapped to MADV_UNMERGEABLE areas are expected to be a complete and unshared page). To not blindly unshare all shared zero_pages in applicable VMAs, the patch use pte_mkdirty (related with architecture) to mark KSM-placed zero pages. Thus, MADV_UNMERGEABLE will only unshare those KSM-placed zero pages. In addition, we'll reuse this mechanism to reliably identify KSM-placed ZeroPages to properly account for them (e.g., calculating the KSM profit that includes zeropages) in the latter patches. The patch will not degrade the performance of use_zero_pages as it doesn't change the way of merging empty pages in use_zero_pages's feature. Link: https://lkml.kernel.org/r/202306131104554703428@zte.com.cn Link: https://lkml.kernel.org/r/20230613030928.185882-1-yang.yang29@zte.com.cnSigned-off-by:
-
Mika Penttilä authored
Migrating file pages and swapcache pages into device memory is not supported. Try to get rid of the swap cache, and if successful, go ahead as with other anonymous pages. Link: https://lkml.kernel.org/r/20230607172944.11713-1-mpenttil@redhat.comSigned-off-by:
Mika Penttilä <mpenttil@redhat.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
-
Domenico Cerasuolo authored
Add a test to verify that when a memcg hits its limit in zswap, it doesn't trigger an unwanted writeback that would result in pages not owned by that memcg to be sent to disk, even if zswap isn't full. This was fixed by commit 0bdf0efa("zswap: do not shrink if cgroup may not zswap"). Link: https://lkml.kernel.org/r/20230621153548.428093-4-cerasuolodomenico@gmail.comSigned-off-by:
Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by:
-
Domenico Cerasuolo authored
Add a cgroup selftest that verifies memcg charging in zswap. The original issue was that kmem bypass was applied to pages swapped out to zswap by kswapd, resulting in zswapped memory not being charged. It was fixed by commit cd08d80e("mm: correctly charge compressed memory to its memcg"). Link: https://lkml.kernel.org/r/20230621153548.428093-3-cerasuolodomenico@gmail.comSigned-off-by:
-
Domenico Cerasuolo authored
Patch series "selftests: cgroup: add zswap test program". This series adds 2 zswap related selftests that verify known and fixed issues. A new dedicated test program (test_zswap) is proposed since the test cases are specific to zswap and hosts specific helpers. The first patch adds the (empty) test program, while the other 2 add an actual test function each. This patch (of 3): Add empty cgroup-zswap self test scaffold program, test functions to be added in the next commits. Link: https://lkml.kernel.org/r/20230621153548.428093-1-cerasuolodomenico@gmail.com Link: https://lkml.kernel.org/r/20230621153548.428093-2-cerasuolodomenico@gmail.comSigned-off-by:
-
Sebastian Andrzej Siewior authored
__build_all_zonelists() acquires zonelist_update_seq by first disabling interrupts via local_irq_save() and then acquiring the seqlock with write_seqlock(). This is troublesome and leads to problems on PREEMPT_RT. The problem is that the inner spinlock_t becomes a sleeping lock on PREEMPT_RT and must not be acquired with disabled interrupts. The API provides write_seqlock_irqsave() which does the right thing in one step. printk_deferred_enter() has to be invoked in non-migrate-able context to ensure that deferred printing is enabled and disabled on the same CPU. This is the case after zonelist_update_seq has been acquired. There was discussion on the first submission that the order should be: local_irq_disable(); printk_deferred_enter(); write_seqlock(); to avoid pitfalls like having an unaccounted printk() coming from write_seqlock_irqsave() before printk_deferred_enter() is invoked. The only origin of such a printk() can be a lockdep splat because the lockdep annotation happens after the sequence count is incremented. This is exceptional and subject to change. It was also pointed that PREEMPT_RT can be affected by the printk problem since its write_seqlock_irqsave() does not really disable interrupts. This isn't the case because PREEMPT_RT's printk implementation differs from the mainline implementation in two important aspects: - Printing happens in a dedicated threads and not at during the invocation of printk(). - In emergency cases where synchronous printing is used, a different driver is used which does not use tty_port::lock. Acquire zonelist_update_seq with write_seqlock_irqsave() and then defer printk output. Link: https://lkml.kernel.org/r/20230623201517.yw286Knb@linutronix.de Fixes: 1007843a ("mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Minchan Kim authored
__zs_compact always putback src_zspage into class list after migrate_zspage. Thus, we don't need to keep last position of src_zspage any more. Let's remove it. Link: https://lkml.kernel.org/r/20230624053120.643409-4-senozhatsky@chromium.orgSigned-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by:
-
Sergey Senozhatsky authored
Destination zspage fullness check need to be done after zs_object_copy() because that's where source and destination zspages fullness change. Checking destination zspage fullness before zs_object_copy() may cause migration to loop through source zspage sub-pages scanning for allocate objects just to find out at the end that the destination zspage is full. Link: https://lkml.kernel.org/r/20230624053120.643409-3-senozhatsky@chromium.orgSigned-off-by:
-
Sergey Senozhatsky authored
Patch series "zsmalloc: small compaction improvements", v2. A tiny series that can reduce the number of find_alloced_obj() invocations (which perform a linear scan of sub-page) during compaction. Inspired by Alexey Romanov's findings. This patch (of 3): zspage migration can terminate as soon as it moves the last allocated object from the source zspage. Add a simple helper zspage_empty() that tests zspage ->inuse on each migration iteration. Link: https://lkml.kernel.org/r/20230624053120.643409-2-senozhatsky@chromium.orgSigned-off-by:
Alexey Romanov <AVRomanov@sberdevices.ru> Reviewed-by:
-
Miaohe Lin authored
HASH_SMALL only works when parameter numentries is 0. But the sole caller futex_init() never calls alloc_large_system_hash() with numentries set to 0. So HASH_SMALL is obsolete and remove it. Link: https://lkml.kernel.org/r/20230625021323.849147-1-linmiaohe@huawei.comSigned-off-by:
Mike Rapoport (IBM) <rppt@kernel.org> Cc: André Almeida <andrealmeid@igalia.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
liuq authored
The current calculation of min_free_kbytes only uses ZONE_DMA and ZONE_NORMAL pages,but the ZONE_MOVABLE zone->_watermark[WMARK_MIN] will also divide part of min_free_kbytes.This will cause the min watermark of ZONE_NORMAL to be too small in the presence of ZONE_MOVEABLE. __GFP_HIGH and PF_MEMALLOC allocations usually don't need movable zone pages, so just like ZONE_HIGHMEM, cap pages_min to a small value in __setup_per_zone_wmarks(). On my testing machine with 16GB of memory (transparent hugepage is turned off by default, and movablecore=12G is configured) The following is a comparative test data of watermark_min no patch add patch ZONE_DMA 1 8 ZONE_DMA32 151 709 ZONE_NORMAL 233 1113 ZONE_MOVABLE 1434 128 min_free_kbytes 7288 7326 Link: https://lkml.kernel.org/r/20230625031656.23941-1-liuq131@chinatelecom.cnSigned-off-by:
liuq <liuq131@chinatelecom.cn> Reviewed-by:
-
Bean Huo authored
block_commit_write() always returns 0, this patch changes it to return void. Link: https://lkml.kernel.org/r/20230626055518.842392-3-beanhuo@iokpp.deSigned-off-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Bean Huo authored
Originally inode is used to get blksize, after commit 45bce8f3 ("fs/buffer.c: make block-size be per-page and protected by the page lock"), __block_commit_write no longer uses this parameter inode. [akpm@linux-foundation.org: remove now-unused local `inode'] Link: https://lkml.kernel.org/r/20230626055518.842392-2-beanhuo@iokpp.deSigned-off-by:
-
Miaohe Lin authored
Remove unneeded 'inline' annotation from num_poisoned_pages_inc() and num_poisoned_pages_sub(). No functional change intended. Link: https://lkml.kernel.org/r/20230626114343.1846587-1-linmiaohe@huawei.comSigned-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by:
-
Miaohe Lin authored
Use helper function destroy_memory_type() to release memtype instead of open code it to help improve code readability a bit. No functional change intended. Link: https://lkml.kernel.org/r/20230626121053.1916447-1-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
Remove unneeded PageLRU(p) and is_free_buddy_page(p) check as slab caches are not shrunk now. This check can be added back when a lightweight range based shrinker is available. Link: https://lkml.kernel.org/r/20230628014929.3441386-1-linmiaohe@huawei.comSigned-off-by:
-
Peng Zhang authored
When expanding a range in two directions, only partially overwriting the previous and next ranges, the number of entries will not be increased, so we can just update the pivots as a fast path. However, it may introduce potential risks in RCU mode, because it updates two pivots. We only enable it in non-RCU mode. Link: https://lkml.kernel.org/r/20230628073657.75314-5-zhangpeng.00@bytedance.comSigned-off-by:
Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by:
-
Peng Zhang authored
When the new range can be completely covered by the original last range without touching the boundaries on both sides, two new entries can be appended to the end as a fast path. We update the original last pivot at the end, and the newly appended two entries will not be accessed before this, so it is also safe in RCU mode. This is useful for sequential insertion, which is what we do in dup_mmap(). Enabling BENCH_FORK in test_maple_tree and just running bench_forking() gives the following time-consuming numbers: before: after: 17,874.83 msec 15,738.38 msec It shows about a 12% performance improvement for duplicating VMAs. Link: https://lkml.kernel.org/r/20230628073657.75314-4-zhangpeng.00@bytedance.comSigned-off-by:
-
Peng Zhang authored
Add test for expanding range in RCU mode. If we use the fast path of the slot store to expand range in RCU mode, this test will fail. Link: https://lkml.kernel.org/r/20230628073657.75314-3-zhangpeng.00@bytedance.comSigned-off-by:
-
Peng Zhang authored
Patch series "Optimize the fast path of mas_store()", v4. Add fast paths for mas_wr_append() and mas_wr_slot_store() respectively. The newly added fast path of mas_wr_append() is used in fork() and how much it benefits fork() depends on how many VMAs are duplicated. Thanks Liam for the review. This patch (of 4): Add tests for all cases of mas_wr_append() and mas_wr_slot_store(). Link: https://lkml.kernel.org/r/20230628073657.75314-1-zhangpeng.00@bytedance.com Link: https://lkml.kernel.org/r/20230628073657.75314-2-zhangpeng.00@bytedance.comSigned-off-by:
-
Haibo Li authored
ra->prev_pos tracks the last visited byte in the previous read request. It is used to check whether it is sequential read in ondemand_readahead and thus affects the readahead window. After commit 06c04442 ("mm/filemap.c: generic_file_buffered_read() now uses find_get_pages_contig"), update logic of prev_pos is changed. It updates prev_pos after each return from filemap_get_pages(). But the read request from user may be not fully completed at this point. The updated prev_pos impacts the subsequent readahead window. The real problem is performance drop of fsck_msdos between linux-5.4 and linux-5.15(also linux-6.4). Comparing to linux-5.4,It spends about 110% time and read 140% pages. The read pattern of fsck_msdos is not fully sequential. Simplified read pattern of fsck_msdos likes below: 1.read at page offset 0xa,size 0x1000 2.read at other page offset like 0x20,size 0x1000 3.read at page offset 0xa,size 0x4000 4.read at page offset 0xe,size 0x1000 Here is the read status on linux-6.4: 1.after read at page offset 0xa,size 0x1000 ->page ofs 0xa go into pagecache 2.after read at page offset 0x20,size 0x1000 ->page ofs 0x20 go into pagecache 3.read at page offset 0xa,size 0x4000 ->filemap_get_pages read ofs 0xa from pagecache and returns ->prev_pos is updated to 0xb and goto next loop ->filemap_get_pages tends to read ofs 0xb,size 0x3000 ->initial_readahead case in ondemand_readahead since prev_pos is the same as request ofs. ->read 8 pages while async size is 5 pages (PageReadahead flag at page 0xe) 4.read at page offset 0xe,size 0x1000 ->hit page 0xe with PageReadahead flag set,double the ra_size. read 16 pages while async size is 16 pages Now it reads 24 pages while actually uses 5 pages on linux-5.4: 1.the same as 6.4 2.the same as 6.4 3.read at page offset 0xa,size 0x4000 ->read ofs 0xa from pagecache ->read ofs 0xb,size 0x3000 using page_cache_sync_readahead read 3 pages ->prev_pos is updated to 0xd before generic_file_buffered_read returns 4.read at page offset 0xe,size 0x1000 ->initial_readahead case in ondemand_readahead since request ofs-prev_pos==1 ->read 4 pages while async size is 3 pages Now it reads 7 pages while actually uses 5 pages. In above demo, the initial_readahead case is triggered by offset of user request on linux-5.4. While it may be triggered by update logic of prev_pos on linux-6.4. To fix the performance drop, update prev_pos after finishing one read request. Link: https://lkml.kernel.org/r/20230628110220.120134-1-haibo.li@mediatek.comSigned-off-by:
Haibo Li <haibo.li@mediatek.com> Reviewed-by:
-
Peter Xu authored
Add a matrix for testing gup based on the current gup_test. Only run the matrix when -a is specified because it's a bit slow. It covers: - Different types of huge pages: thp, hugetlb, or no huge page - Permissions: Write / Read-only - Fast-gup, with/without - Types of the GUP: pin / gup / longterm pins - Shared / Private memories - GUP size: 1 / 512 / random page sizes Link: https://lkml.kernel.org/r/20230628215310.73782-9-peterx@redhat.comSigned-off-by:
Peter Xu <peterx@redhat.com> Acked-by:
-
Peter Xu authored
Allows to specify optional tests in run_vmtests.sh, where we can run time consuming test matrix only when user specified "-a". Link: https://lkml.kernel.org/r/20230628215310.73782-8-peterx@redhat.comSigned-off-by:
-
