- 03 Feb, 2018 40 commits
-
-
Greg Kroah-Hartman authored
commit d08dd3f3 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by:
"Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
OKAMOTO Yoshiaki authored
commit 69341bd1 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by:
Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp> Signed-off-by:
Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp> Acked-by:
-
Larry Finger authored
[ Upstream commit b77992d2 ] When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b2fc059f ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7c ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Icenowy Zheng authored
[ Upstream commit 04226916 ] A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 72753590 ] _vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa497613 ("ufs: Add regulator enable support") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Guilherme G. Piccoli authored
[ Upstream commit e4717292 ] As part of the scsi EH path, aacraid performs a reinitialization of the adapter, which encompass freeing resources and IRQs, NULLifying lots of pointers, and then initialize it all over again. We've identified a problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ is enabled on kernel config file. Happens that, in case this flag was set, right after free_irq() effectively clears the interrupt, it checks if it was requested as IRQF_SHARED. In positive case, it performs another call to the IRQ handler on driver. Problem is: since aacraid currently free some resources *before* freeing the IRQ, once free_irq() path calls the handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL pointer dereference with the following trace: aac_src_intr_message+0xf8/0x740 [aacraid] __free_irq+0x33c/0x4a0 free_irq+0x78/0xb0 aac_free_irq+0x13c/0x150 [aacraid] aac_reset_adapter+0x2e8/0x970 [aacraid] aac_eh_reset+0x3a8/0x5d0 [aacraid] scsi_try_host_reset+0x74/0x180 scsi_eh_ready_devs+0xc70/0x1510 scsi_error_handler+0x624/0xa20 This patch prevents the crash by changing the order of the deinitialization in this path of aacraid: first we clear the IRQ, then we free other resources. No functional change intended. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 22a6c837 ] Fix some complaints from the UBSAN about signed integer addition overflows. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 8677b1ac ] If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c1 ("drm/omap: fix TILER on OMAP5") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Yisheng Xie authored
[ Upstream commit bde5f6bc ] kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.comSigned-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 4ba161a7 ] Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Tested-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 88bc0ede ] register_shrinker() might return -ENOMEM error since Linux 3.12. Call panic() as with other failure checks in this function if register_shrinker() failed. Fixes: 1d3d4437 ("vmscan: per-node deferred work") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jan Kara <jack@suse.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 15bfe05c ] On 64-bit (e.g. powerpc64/allmodconfig): drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); ^ cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer. Note that several other fields in struct cdmac_bd are also too small to hold physical addresses on 64-bit platforms. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Robert Lippert authored
[ Upstream commit bd467e4e ] Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba78 ("hwmon: PMBus device driver") Signed-off-by:
Robert Lippert <rlippert@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 81833de1 ] restart_grace() uses hardcoded init_net. It can cause to "list_add double add" in following scenario: 1) nfsd and lockd was started in several net namespaces 2) nfsd in init_net was stopped (lockd was not stopped because it have users from another net namespaces) 3) lockd got signal, called restart_grace() -> set_grace_period() and enabled lock_manager in hardcoded init_net. 4) nfsd in init_net is started again, its lockd_up() calls set_grace_period() and tries to add lock_manager into init_net 2nd time. Jeff Layton suggest: "Make it safe to call locks_start_grace multiple times on the same lock_manager. If it's already on the global grace_list, then don't try to add it again. (But we don't intentionally add twice, so for now we WARN about that case.) With this change, we also need to ensure that the nfsd4 lock manager initializes the list before we call locks_start_grace. While we're at it, move the rest of the nfsd_net initialization into nfs4_state_create_net. I see no reason to have it spread over two functions like it is today." Suggested patch was updated to generate warning in described situation. Suggested-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Andrew Elble authored
[ Upstream commit ae254dac ] Prevent the use of the closed (invalid) special stateid by clients. Signed-off-by:
Andrew Elble <aweits@rit.edu> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit b8722857 ] Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 9271d7e5 ] After taking the stateid st_mutex, we want to know that the stateid still represents valid state before performing any non-idempotent actions. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit fb500a7c ] Signed-off-by:
-
Eduardo Otubo authored
[ Upstream commit 5b5971df ] v2: * Replace busy wait with wait_event()/wake_up_all() * Cannot garantee that at the time xennet_remove is called, the xen_netback state will not be XenbusStateClosed, so added a condition for that * There's a small chance for the xen_netback state is XenbusStateUnknown by the time the xen_netfront switches to Closed, so added a condition for that. When unloading module xen_netfront from guest, dmesg would output warning messages like below: [ 105.236836] xen:grant_table: WARNING: g.e. 0x903 still in use! [ 105.236839] deferring g.e. 0x903 (pfn 0x35805) This problem relies on netfront and netback being out of sync. By the time netfront revokes the g.e.'s netback didn't have enough time to free all of them, hence displaying the warnings on dmesg. The trick here is to make netfront to wait until netback frees all the g.e.'s and only then continue to cleanup for the module removal, and this is done by manipulating both device states. Signed-off-by:
Eduardo Otubo <otubo@redhat.com> Acked-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit c37c2873 ] Reported by syzkaller: *** Guest State *** CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1 CR3 = 0x000000002081e000 RSP = 0x000000000000fffa RIP = 0x0000000000000000 RFLAGS=0x00023000 DR7 = 0x00000000000000 ^^^^^^^^^^ ------------[ cut here ]------------ WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] CPU: 6 PID: 24431 Comm: reprotest Tainted: G W OE 4.14.0+ #26 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] RSP: 0018:ffff880291d179e0 EFLAGS: 00010202 Call Trace: kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The failed vmentry is triggered by the following beautified testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_guest_debug debug = { .control = 0xf0403, .arch = { .debugreg[6] = 0x2, .debugreg[7] = 0x2 } }; ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug); ioctl(r[4], KVM_RUN, 0); } which testcase tries to setup the processor specific debug registers and configure vCPU for handling guest debug events through KVM_SET_GUEST_DEBUG. The KVM_SET_GUEST_DEBUG ioctl will get and set rflags in order to set TF bit if single step is needed. All regs' caches are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU reset. However, the cache of rflags is not reset during vCPU reset. The function vmx_get_rflags() returns an unreset rflags cache value since the cache is marked avail, it is 0 after boot. Vmentry fails if the rflags reserved bit 1 is 0. This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and its cache to 0x2 during vCPU reset. Reported-by:
David Hildenbrand <david@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit b77000ed ] If we fail to prepare our pages for whatever reason (out of memory in our case) we need to make sure to drop the block_group->data_rwsem, otherwise hilarity ensues. Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> [ add label and use existing unlocking code ] Signed-off-by:
-
Chun-Yeow Yeoh authored
[ Upstream commit fbbdad5e ] The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
zhangliping authored
[ Upstream commit 67c8d22a ] If we want to add a datapath flow, which has more than 500 vxlan outputs' action, we will get the following error reports: openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Flow action size 32832 bytes exceeds max openvswitch: netlink: Actions may not be safe on all matching packets ... ... It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but this is not the root cause. For example, for a vxlan output action, we need about 60 bytes for the nlattr, but after it is converted to the flow action, it only occupies 24 bytes. This means that we can still support more than 1000 vxlan output actions for a single datapath flow under the the current 32k max limitation. So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we shouldn't report EINVAL and keep it move on, as the judgement can be done by the reserve_sfa_size. Signed-off-by:
zhangliping <zhangliping02@baidu.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Felix Kuehling authored
[ Upstream commit 8c946b89 ] SDMA only supports a fixed number of queues. HWS cannot handle oversubscription. Signed-off-by:
shaoyun liu <shaoyun.liu@amd.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
shaoyunl authored
[ Upstream commit d12fb13f ] ffs function return the position of the first bit set on 1 based. (bit zero returns 1). Signed-off-by:
-
Felix Kuehling authored
[ Upstream commit cf21654b ] Fix the SDMA load and unload sequence as suggested by HW document. Signed-off-by:
-
Michael Lyle authored
[ Upstream commit 6c4ca1e3 ] register_shrinker is now __must_check, so check it to kill a warning. Caller of bch_btree_cache_alloc in super.c appropriately checks return value so this is fully plumbed through. This V2 fixes checkpatch warnings and improves the commit description, as I was too hasty getting the previous version out. Signed-off-by:
Michael Lyle <mlyle@lyle.org> Reviewed-by:
Vojtech Pavlik <vojtech@suse.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
James Hogan authored
[ Upstream commit 0d307935 ] The MIPS loongson cpufreq drivers don't build unless configured for the correct machine type, due to dependency on machine specific architecture headers and symbols in machine specific platform code. More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU, neither of which is defined in asm/mach-loongson32/regs-clk.h unless CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references loongson2_clockmod_table[], which is only defined in arch/mips/loongson64/lemote-2f/clock.c, i.e. when CONFIG_LEMOTE_MACH2F=y. Add these dependencies to Kconfig to avoid randconfig / allyesconfig build failures (e.g. when based on BMIPS which also has a cpufreq driver). Signed-off-by:
James Hogan <jhogan@kernel.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 10809bb9 ] Most Bay and Cherry Trail devices use a generic DSDT with all possible peripheral devices present in the DSDT, with their _STA returning 0x00 or 0x0f based on AML variables which describe what is actually present on the board. Since ACPI device objects with a 0x00 status (not present) still get an entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID modalias, userspace would end up loading modules for non present hardware. This commit fixes this by leaving the modalias empty for non present devices. This results in 10 modules less being loaded with a generic distro kernel config on my Cherry Trail test-device (a GPD pocket). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Nikita Leshenko authored
[ Upstream commit b200dded ] According to 82093AA (IOAPIC) manual, Remote IRR and Delivery Status are read-only. QEMU implements the bits as RO in commit 479c2a1cb7fb ("ioapic: keep RO bits for IOAPIC entry"). Signed-off-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Steve Rutherford <srutherford@google.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Nikita Leshenko authored
[ Upstream commit a8bfec29 ] Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for IOAPICs without an EOI register. They simulate the EOI message manually by changing the trigger mode to edge and then back to level, with the entry being masked during this. QEMU implements this feature in commit ed1263c363c9 ("ioapic: clear remote irr bit for edge-triggered interrupts") As a side effect, this commit removes an incorrect behavior where Remote IRR was cleared when the redirection table entry was rewritten. This is not consistent with the manual and also opens an opportunity for a strange behavior when a redirection table entry is modified from an interrupt handler that handles the same entry: The modification will clear the Remote IRR bit even though the interrupt handler is still running. Signed-off-by:
-
Nikita Leshenko authored
[ Upstream commit 0fc5a36d ] KVM uses ioapic_handled_vectors to track vectors that need to notify the IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending or running and ioapic_handled_vectors only remembers the newest configuration; thus EOI from the old interrupt is not delievered to the IOAPIC. A previous commit db2bdcbb ("KVM: x86: fix edge EOI and IOAPIC reconfig race") addressed this issue by adding pending edge-triggered interrupts to ioapic_handled_vectors, fixing this race for edge-triggered interrupts. The commit explicitly ignored level-triggered interrupts, but this race applies to them as well: 1) IOAPIC sends a level triggered interrupt vector to VCPU0 2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC to route the vector to VCPU1. The reconfiguration rewrites only the upper 32 bits of the IOREDTBLn register. (Causes KVM to update ioapic_handled_vectors for VCPU0 and it no longer includes the vector.) 3) VCPU0 sends EOI for the vector, but it's not delievered to the IOAPIC because the ioapic_handled_vectors doesn't include the vector. 4) New interrupts are not delievered to VCPU1 because remote_irr bit is set forever. Therefore, the correct behavior is to add all pending and running interrupts to ioapic_handled_vectors. This commit introduces a slight performance hit similar to commit db2bdcbb ("KVM: x86: fix edge EOI and IOAPIC reconfig race") for the rare case that the vector is reused by a non-IOAPIC source on VCPU0. We prefer to keep solution simple and not handle this case just as the original commit does. Fixes: db2bdcbb ("KVM: x86: fix edge EOI and IOAPIC reconfig race") Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit 3853be26 ] Pedro reported: During tests that we conducted on KVM, we noticed that executing a "PUSH %ES" instruction under KVM produces different results on both memory and the SP register depending on whether EPT support is enabled. With EPT the SP is reduced by 4 bytes (and the written value is 0-padded) but without EPT support it is only reduced by 2 bytes. The difference can be observed when the CS.DB field is 1 (32-bit) but not when it's 0 (16-bit). The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D also should be respected instead of just default operand/address-size/66H prefix/67H prefix during instruction decoding. This patch fixes it by also adjusting operand/address-size according to CS.D. Reported-by:
Pedro Fonseca <pfonseca@cs.washington.edu> Tested-by:
-
Liran Alon authored
[ Upstream commit 9b8ae637 ] In case of instruction-decode failure or emulation failure, x86_emulate_instruction() will call reexecute_instruction() which will attempt to use the cr2 value passed to x86_emulate_instruction(). However, when x86_emulate_instruction() is called from emulate_instruction(), cr2 is not passed (passed as 0) and therefore it doesn't make sense to execute reexecute_instruction() logic at all. Fixes: 51d8b661 ("KVM: cleanup emulate_instruction") Signed-off-by:
-
Liran Alon authored
[ Upstream commit 1f4dcb3b ] On this case, handle_emulation_failure() fills kvm_run with internal-error information which it expects to be delivered to user-mode for further processing. However, the code reports a wrong return-value which makes KVM to never return to user-mode on this scenario. Fixes: 6d77dbfc ("KVM: inject #UD if instruction emulation fails and exit to userspace") Signed-off-by:
-
Lyude Paul authored
commit 888f2293 upstream. Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon hotplugging my kernel would immediately crash due to igb: [ 680.825801] kernel BUG at drivers/pci/msi.c:352! [ 680.828388] invalid opcode: 0000 [#1] SMP [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb] [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6 [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017 [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0 [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286 [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178 [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00 [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298 [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000 [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000 [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0 [ 680.837954] Call Trace: [ 680.838853] pci_disable_msix+0xce/0xf0 [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb] [ 680.840278] igb_remove+0x9d/0x110 [igb] [ 680.840764] pci_device_remove+0x36/0xb0 [ 680.841279] device_release_driver_internal+0x157/0x220 [ 680.841739] pci_stop_bus_device+0x7d/0xa0 [ 680.842255] pci_stop_bus_device+0x2b/0xa0 [ 680.842722] pci_stop_bus_device+0x3d/0xa0 [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20 [ 680.843627] trim_stale_devices+0xf3/0x140 [ 680.844086] trim_stale_devices+0x94/0x140 [ 680.844532] trim_stale_devices+0xa6/0x140 [ 680.845031] ? get_slot_status+0x90/0xc0 [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140 [ 680.846021] acpiphp_hotplug_notify+0x175/0x200 [ 680.846581] ? free_bridge+0x100/0x100 [ 680.847113] acpi_device_hotplug+0x8a/0x490 [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30 [ 680.848076] process_one_work+0x182/0x3a0 [ 680.848543] worker_thread+0x2e/0x380 [ 680.848963] ? process_one_work+0x3a0/0x3a0 [ 680.849373] kthread+0x111/0x130 [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50 [ 680.850188] ret_from_fork+0x1f/0x30 [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0 As it turns out, normally the freeing of IRQs that would fix this is called inside of the scope of __igb_close(). However, since the device is already gone by the point we try to unregister the netdevice from the driver due to a hotplug we end up seeing that the netif isn't present and thus, forget to free any of the device IRQs. So: make sure that if we're in the process of dismantling the netdev, we always allow __igb_close() to be called so that IRQs may be freed normally. Additionally, only allow igb_close() to be called from __igb_close() if it hasn't already been called for the given adapter. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: 9474933c ("igb: close/suspend race in netif_device_detach") Cc: Todd Fujinaka <todd.fujinaka@intel.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jesse Chan authored
commit d822401d upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Jesse Chan <jc@linux.com> Acked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Jesse Chan authored
commit 539340f3 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by:
Alban Bedel <albeu@free.fr> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jesse Chan authored
commit 97b03136 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
-
