The kernel doc description for usage of the struct pfn_array in
pfn_array_pin() is unnecessary long. Let's shorten it by describing
the contents of the struct pfn_array fields at the struct's definition
instead.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Message-Id: <20180523025645.8978-2-bjsdjshi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

There is at least one relevant guest OS that doesn't set the IDA flags in
the ORB as we would like them, but never uses any IDA. So instead of
saying -EOPNOTSUPP when observing an ORB, such that a channel program
specified by it could be a not supported one, let us say -EOPNOTSUPP only
if the channel program is a not supported one.

Of course, the real solution would be doing proper translation for all
IDA. This is possible, but given the current code not straight forward.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <20180516173342.15174-1-pasic@linux.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

If the device has not been registered, or there is work pending,
we should reschedule a sch_event call again.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20180502072559.50691-1-bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

The arch_get_random_seed_long() invocation done by the random device
driver is done in interrupt context and may be invoked very very
frequently. The existing s390 arch_get_random_seed*() implementation
uses the PRNO(TRNG) instruction which produces excellent high quality
entropy but is relatively slow and thus expensive.

This fix reworks the arch_get_random_seed* implementation. It
introduces a buffer concept to decouple the delivery of random data
via arch_get_random_seed*() from the generation of new random
bytes. The buffer of random data is filled asynchronously by a
workqueue thread.
If there are enough bytes in the buffer the s390_arch_random_generate()
just delivers these bytes. Otherwise false is returned until the worker
thread refills the buffer.
The worker fills the rng buffer by pulling fresh entropy from the
high quality (but slow) true hardware random generator. This entropy
is then spread over the buffer with an pseudo random generator.
As the arch_get_random_seed_long() fetches 8 bytes and the calling
function add_interrupt_randomness() counts this as 1 bit entropy the
distribution needs to make sure there is in fact 1 bit entropy
contained in 8 bytes of the buffer. The current values pull 32 byte
entropy and scatter this into a 2048 byte buffer. So 8 byte in the
buffer will contain 1 bit of entropy.
The worker thread is rescheduled based on the charge level of the
buffer but at least with 500 ms delay to avoid too much cpu consumption.
So the max. amount of rng data delivered via arch_get_random_seed is
limited to 4Kb per second.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 hardware supports the definition of a so-call Physical NETwork
IDentifier (short PNETID) per network device port. These PNETIDS
can be used to identify network devices that are attached to the same
physical network (broadcast domain).

This patch provides the interface to extract the PNETID of a port of
a device attached to the ccw-bus or pci-bus.

Parts of this patch are based on an initial implementation by
Thomas Richter.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Provide __dasd_cancel_req that is called with the ccw device lock
held to simplify the locking in dasd_times_out. Also this removes
the following sparse warning:
context imbalance in 'dasd_times_out' - different lock contexts for basic block

Note: with this change dasd_schedule_device_bh is now called (via
dasd_cancel_req) with the ccw device lock held. But is is already
the case for other codepaths.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add a test to check if a given device is a ccwgroup device.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

VMLINUX_SYMBOL() is no-op unless CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
is defined.  It has ever been selected only by BLACKFIN and METAG.
VMLINUX_SYMBOL() is unneeded for s390-specific code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

There should not be a '.' at the end of the spectre syslog messages.
Remove them.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Introduce compile time check for files which should avoid using .bss
section, because of the following reasons:
- .bss section has not been zeroed yet,
- initrd has not been moved to a safe location and could be overlapping
with .bss section.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Move functions which may not access bss section to extra file. This
makes it easier to verify that all early functions which may not rely
on an initialized bss section are not accessing it.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use IS_ENABLED to get rid of an #ifdef statement.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

memmove_early was introduced with commit d543a106 ("s390: fix
initrd corruptions with gcov/kcov instrumented kernels"). The reason
for writing this extra memmove implementation was to be able to move
memory from an unknown location (aka SCSI IPL parameter block) to a
known location.

This had to done early before it was known if the SCSI IPL parameter
block pointer was valid or not, and therefore the memmove
implementation was supposed to be able to handle program checks.

The code has been changed and especially with commit d08091ac
("s390/ipl: rely on diag308 store to get ipl info") and
commit b4623d4e ("s390: provide memmove implementation") there
is no need to have a memmove version that can handle program checks,
and in addition it cannot be gcov/kcov instrumented anymore.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The CPU Measurement sampling facility creates a trailer entry for each
Sample-Data-Block of stored samples. The trailer entry contains the sizes
(in bytes) of the stored sampling types:
 - basic-sampling data entry size
 - diagnostic-sampling data entry size
Both sizes are 2 bytes long.

This patch changes the trailer entry definition to reflect this.

Fixes: fcc77f50 ("s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The s390 CPU measurement facility sampling mode supports basic entries
and diagnostic entries. Each entry has a valid bit to indicate the
status of the entry as valid or invalid.

This bit is bit 31 in the diagnostic entry, but the bit mask definition
refers to bit 30.

Fix this by making the reserved field one bit larger.

Fixes: 7e75fc3f ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Correct a trinity finding for the perf_event_open() system call with
a perf event attribute structure that uses a frequency but has the
sampling frequency set to zero.  This causes a FP divide exception during
the sample rate initialization for the hardware sampling facility.

Fixes: 8c069ff4 ("s390/perf: add support for the CPU-Measurement Sampling Facility")
Cc: stable@vger.kernel.org # 3.14+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx
assembler stubs and the indirect branches generated by the JIT itself
need to be converted to expolines.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The BPF JIT uses a 'b <disp>(%r<x>)' instruction in the definition
of the sk_load_word and sk_load_half functions.

Add support for branch-on-condition instructions contained in the
thunk code of an expoline.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The inline assembly to call __do_softirq on the irq stack uses
an indirect branch. This can be replaced with a normal relative
branch.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The nospec-branch.c file is compiled without the gcc options to
generate expoline thunks. The return branch of the sysfs show
functions cpu_show_spectre_v1 and cpu_show_spectre_v2 is an indirect
branch as well. These need to be compiled with expolines.

Move the sysfs functions for spectre reporting to a separate file
and loose an '.' for one of the messages.

Cc: stable@vger.kernel.org # 4.16
Fixes: d424986f ("s390: add sysfs attributes for spectre")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The assember code in arch/s390/kernel uses a few more indirect branches
which need to be done with execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The return from the ftrace_stub, _mcount, ftrace_caller and
return_to_handler functions is done with "br %r14" and "br %r1".
These are indirect branches as well and need to use execute
trampolines for CONFIG_EXPOLINE=y.

The ftrace_caller function is a special case as it returns to the
start of a function and may only use %r0 and %r1. For a pre z10
machine the standard execute trampoline uses a LARL + EX to do
this, but this requires *two* registers in the range %r1..%r15.
To get around this the 'br %r1' located in the lowcore is used,
then the EX instruction does not need an address register.
But the lowcore trick may only be used for pre z14 machines,
with noexec=on the mapping for the first page may not contain
instructions. The solution for that is an ALTERNATIVE in the
expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to
EXRL, this relies on the fact that a machine that supports
noexec=on has EXRL as well.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The return from the memmove, memset, memcpy, __memset16, __memset32 and
__memset64 functions are done with "br %r14". These are indirect branches
as well and need to use execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The return from the crc32_le_vgfm_16/crc32c_le_vgfm_16 and the
crc32_be_vgfm_16 functions are done with "br %r14". These are indirect
branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

To be able to use the expoline branches in different assembler
files move the associated macros from entry.S to a new header
nospec-insn.h.

While we are at it make the macros a bit nicer to use.

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If the translation of a channel program fails, we may end up attempting
to clean up (free, unpin) stuff that never got translated (and allocated,
pinned) in the first place.

By adjusting the lengths of the chains accordingly (so the element that
failed, and all subsequent elements are excluded) cleanup activities
based on false assumptions can be avoided.

Let's make sure cp_free works properly after cp_prefetch returns with an
error by setting ch_len of a ccw chain to the number of the translated
CCWs on that chain.

Cc: stable@vger.kernel.org #v4.12+
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20180423110113.59385-2-bjsdjshi@linux.vnet.ibm.com>
[CH: fixed typos]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix the following sparse complaints:

arch/s390/purgatory/purgatory.c:18:5: warning: symbol 'kernel_entry' was not declared. Should it be static?
arch/s390/purgatory/purgatory.c:19:5: warning: symbol 'kernel_type' was not declared. Should it be static?
arch/s390/purgatory/purgatory.c:21:5: warning: symbol 'crash_start' was not declared. Should it be static?
arch/s390/purgatory/purgatory.c:22:5: warning: symbol 'crash_size' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Change the following to y:

arch/s390/configs/performance_defconfig:262:warning: symbol value 'm' invalid for NF_TABLES_IPV4
arch/s390/configs/performance_defconfig:264:warning: symbol value 'm' invalid for NF_TABLES_ARP
arch/s390/configs/performance_defconfig:285:warning: symbol value 'm' invalid for NF_TABLES_IPV6
arch/s390/configs/performance_defconfig:306:warning: symbol value 'm' invalid for NF_TABLES_BRIDGE
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull virtio fixups from Michael Tsirkin:

 - Latest header update will break QEMU (if it's rebuilt with the new
   header) - and it seems that the code there is so fragile that any
   change in this header will break it. Add a better interface so users
   do not need to change their code every time that header changes.

 - Fix virtio console for spec compliance.

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_console: reset on out of memory
  virtio_console: move removal code
  virtio_console: drop custom control queue cleanup
  virtio_console: free buffers after reset
  virtio: add ability to iterate over vqs
  virtio_console: don't tie bufs to a vq
  virtio_balloon: add array of stat names

Merge tag 'hwmon-for-linus-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Add support for new Ryzen chips to k10temp driver
   ... making Phoronix happy

 - Fix inconsistent chip access in nct6683 driver

 - Handle absence of few types of sensors in scmi driver

* tag 'hwmon-for-linus-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (k10temp) Add support for AMD Ryzen w/ Vega graphics
  hwmon: (k10temp) Add temperature offset for Ryzen 2700X
  hwmon: (nct6683) Enable EC access if disabled at boot
  hwmon: (scmi) handle absence of few types of sensors

Pull PCI fixes from Bjorn Helgaas:

 - fix Aardvark MRRS setting (Evan Wang)

 - clarify "bandwidth available" link status message (Jakub Kicinski)

 - update Kirin GPIO name to fix probe failure (Loic Poulain)

 - fix Aardvark IRQ usage (Victor Gu)

 - fix Aardvark config accessor issues (Victor Gu)

* tag 'pci-v4.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Add "PCIe" to pcie_print_link_status() messages
  PCI: kirin: Fix reset gpio name
  PCI: aardvark: Fix PCIe Max Read Request Size setting
  PCI: aardvark: Use ISR1 instead of ISR0 interrupt in legacy irq mode
  PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf()
  PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf()

Pull tracing fixes from Steven Rostedt:

 - Add workqueue forward declaration (for new work, but a nice clean up)

 - seftest fixes for the new histogram code

 - Print output fix for hwlat tracer

 - Fix missing system call events - due to change in x86 syscall naming

 - Fix kprobe address being used by perf being hashed

* tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix missing tab for hwlat_detector print format
  selftests: ftrace: Add a testcase for multiple actions on trigger
  selftests: ftrace: Fix trigger extended error testcase
  kprobes: Fix random address output of blacklist file
  tracing: Fix kernel crash while using empty filter with perf
  tracing/x86: Update syscall trace events to handle new prefixed syscall func names
  tracing: Add missing forward declaration

Pull ACPI fixes from Rafael Wysocki:
 "These are two watchdog-related fixes, fix for a backlight regression
  from the 4.16 cycle that unfortunately was propagated to -stable and a
  button module modification to prevent graphics driver modules from
  failing to load due to unmet dependencies if ACPI is disabled from the
  kernel command line.

  Specifics:

   - Change the ACPI subsystem initialization ordering to initialize the
     WDAT watchodg before reserving PNP motherboard resources so as to
     allow the watchdog to allocate its resources before the PNP code
     gets to them and prevents it from working correctly (Mika
     Westerberg).

   - Add a quirk for Lenovo Z50-70 to use the iTCO watchdog instead of
     the WDAT one which conflicts with the RTC on that platform (Mika
     Westerberg).

   - Avoid breaking backlight handling on Dell XPS 13 2013 model by
     allowing laptops to use the ACPI backlight by default even if they
     are Windows 8-ready in principle (Hans de Goede)"

* tag 'acpi-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Only default only_lcd to true on Win8-ready _desktops_
  ACPI / button: make module loadable when booted in non-ACPI mode
  ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70
  ACPI / scan: Initialize watchdog before PNP

Pull power management fixes from Rafael Wysocki:
 "These are a Low Power S0 Idle quirk, a hibernation handling fix for
  the PCI bus type and a brcmstb-avs-cpufreq driver fixup removing
  development debug code from it.

  Specifics:

   - Blacklist the Low Power S0 Idle _DSM on ThinkPad X1 Tablet(2016)
     where it causes issues and make it use ACPI S3 which works instead
     of the non-working suspend-to-idle by default (Chen Yu).

   - Fix the handling of hibernation in the PCI core for devices with
     the DPM_FLAG_SMART_SUSPEND flag set to fix a regression affecting
     intel-lpss I2C devices (Mika Westerberg).

   - Drop development debug code from the brcmstb-avs-cpufreq driver
     (Markus Mayer)"

* tag 'pm-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: brcmstb-avs-cpufreq: remove development debug support
  PCI / PM: Do not clear state_saved in pci_pm_freeze() when smart suspend is set
  ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016)

Pull /dev/random fixes from Ted Ts'o:
 "Fix a regression on NUMA kernels and suppress excess unseeded entropy
  pool warnings"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: rate limit unseeded randomness warnings
  random: fix possible sleeping allocation from irq context

Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes:

   - correct some CPU-MF counter names for z13 and z14

   - correct locking in the vfio-ccw fsm_io_helper function

   - provide arch_uretprobe_is_alive to avoid sigsegv with uretprobes

   - fix a corner case with CPU-MF sampling in regard to execve

   - fix expoline code revert for loadable modules

   - update chpid descriptor for resource accessibility events

   - fix dasd I/O errors due to outdated device alias infomation"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: correct module section names for expoline code revert
  vfio: ccw: process ssch with interrupts disabled
  s390: update sampling tag after task pid change
  s390/cpum_cf: rename IBM z13/z14 counter names
  s390/dasd: fix IO error for newly defined devices
  s390/uprobes: implement arch_uretprobe_is_alive()
  s390/cio: update chpid descriptor after resource accessibility event

* acpi-watchdog:
  ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70

* acpi-button:
  ACPI / button: make module loadable when booted in non-ACPI mode

* acpi-video:
  ACPI / video: Only default only_lcd to true on Win8-ready _desktops_

* acpi-pm:
  ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016)

* pm-cpufreq:
  cpufreq: brcmstb-avs-cpufreq: remove development debug support