- 30 Apr, 2019 4 commits
-
-
Johan Hovold authored
Drop the RELEVANT_IFLAG() macro which essentially hasn't been used for over a decade except in some remnant debug printks that were recently removed. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Drop an unnecessary goto from a write-urb completion error path. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Clean up the throttle implementation by dropping the redundant throttle_req flag which was a remnant from back when there was only a single read URB. Also convert the throttled flag to an atomic bit flag. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Fixes: d83b4053 ("USB: serial: add support for multiple read urbs") Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 26 Apr, 2019 9 commits
-
-
Johan Hovold authored
Simplify init_termios which is only used to override the initial baudrate. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Simplify init_termios which is only used to override the initial baudrate. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Override the initial terminal settings provided by core directly instead of first resetting them to tty_std_termios. Also reorder the cflags as they are usually seen (in bit order). Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Drop bogus TIOCM_CTS, which is not a cflag, from the initial terminal settings. Note that the corresponding bit is already set by CS8. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Now that init_termios() is only called on first use, we can clean up the cypress_m8 initial-termios handling. Note that only the earthmate chip type used settings different from the defaults provided by USB serial core, and that the chip type is indeed known when init_termios is called at tty-install time. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Drop driver termios structure that held a copy of the tty termios for no good reason. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Drop the isthrottled flag which has never been used. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
The initial terminal settings set by the driver matches the default settings provided by core so drop the redundant init_termios callback. Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
The USB-serial driver init_termios callback is used to override the default initial terminal settings provided by USB-serial core. After a bug was fixed in the original implementation introduced by commit fe1ae7fd ("tty: USB serial termios bits"), the init_termios callback was no longer called just once on first use as intended but rather on every (first) open. This specifically meant that the terminal settings saved on (final) close were ignored when reopening a port for drivers overriding the initial settings. Also update the outdated function header referring to the creation of termios objects. Fixes: 7e29bb4b ("usb-serial: fix termios initialization logic") Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 21 Apr, 2019 2 commits
-
-
Johan Hovold authored
Clean up set_termios() by adding missing white space around operators and making a couple of continuation lines more readable. Also drop a couple of redundant braces. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Clean up modem-control handling somewhat by adding missing whitespace around operators and splitting a long statement in two. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 03 Apr, 2019 2 commits
-
-
Johan Hovold authored
Add helper function to update register bits instead of overwriting the entire control register when updating the flow-control settings. This specifically avoids having the tranceiver suspend mode (bit 0) depend on the flow control setting. The tranceiver is currently configured at probe to be disabled during suspend, but this was overridden when disabling flow control or enabling xon/xoff. Fixes: 715f9527 ("USB: flow control fix for pl2303") Fixes: 7041d9c3 ("USB: serial: pl2303: add support for tx xon/xoff flow control") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
-
Johan Hovold authored
Older pl2303 devices do not support automatic xon/xoff flow control, so add add a flag to prevent trying to enable it for legacy device types. Refactor the IXON test into a helper function to improve readability. Fixes: 7041d9c3 ("USB: serial: pl2303: add support for tx xon/xoff flow control") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 31 Mar, 2019 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "A collection of x86 and ARM bugfixes, and some improvements to documentation. On top of this, a cleanup of kvm_para.h headers, which were exported by some architectures even though they not support KVM at all. This is responsible for all the Kbuild changes in the diffstat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION KVM: doc: Document the life cycle of a VM and its resources KVM: selftests: complete IO before migrating guest state KVM: selftests: disable stack protector for all KVM tests KVM: selftests: explicitly disable PIE for tests KVM: selftests: assert on exit reason in CR4/cpuid sync test KVM: x86: update %rip after emulating IO x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts kvm: don't redefine flags as something else kvm: mmu: Used range based flushing in slot_handle_level_range KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region() kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation) KVM: Reject device ioctls from processes other than the VM's creator KVM: doc: Fix incorrect word ordering regarding supported use of APIs KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A pile of x86 updates: - Prevent exceeding he valid physical address space in the /dev/mem limit checks. - Move all header content inside the header guard to prevent compile failures. - Fix the bogus __percpu annotation in this_cpu_has() which makes sparse very noisy. - Disable switch jump tables completely when retpolines are enabled. - Prevent leaking the trampoline address" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/realmode: Make set_real_mode_mem() static inline x86/cpufeature: Fix __percpu annotation in this_cpu_has() x86/mm: Don't exceed the valid physical address space x86/retpolines: Disable switch jump tables when retpolines are enabled x86/realmode: Don't leak the trampoline kernel address x86/boot: Fix incorrect ifdeffery scope x86/resctrl: Remove unused variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: "Core libraries: - Fix max perf_event_attr.precise_ip detection. - Fix parser error for uncore event alias - Fixup ordering of kernel maps after obtaining the main kernel map address. Intel PT: - Fix TSC slip where A TSC packet can slip past MTC packets so that the timestamp appears to go backwards. - Fixes for exported-sql-viewer GUI conversion to python3. ARM coresight: - Fix the build by adding a missing case value for enumeration value introduced in newer library, that now is the required one. tool headers: - Syncronize kernel headers with the kernel, getting new io_uring and pidfd_send_signal syscalls so that 'perf trace' can handle them" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu: Fix parser error for uncore event alias perf scripts python: exported-sql-viewer.py: Fix python3 support perf scripts python: exported-sql-viewer.py: Fix never-ending loop perf machine: Update kernel map address and re-order properly tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd tools headers uapi: Update drm/i915_drm.h tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h perf evsel: Fix max perf_event_attr.precise_ip detection perf intel-pt: Fix TSC slip perf cs-etm: Add missing case value
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug fixes from Thomas Gleixner: "Two SMT/hotplug related fixes: - Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup aborts. This is triggered with the 'nosmt' command line option, but can happen by any abort condition. As the real unplug code is not compiled in, prevent the fail by keeping the CPU in zombie state. - Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation completely. With 'nosmt' being a popular option it's required to unplug the half brought up sibling CPUs (due to the MCE wreckage) completely" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlet from Thomas Gleixner: "Trivial update to the maintainers file" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove deleted file from futex file pattern
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "A small set of core updates: - Make the watchdog respect the selected CPU mask again. That was broken by the rework of the watchdog thread management and caused inconsistent state and NMI watchdog being unstoppable. - Ensure that the objtool build can find the libelf location. - Remove dead kcore stub code" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Respect watchdog cpumask on CPU hotplug objtool: Query pkg-config for libelf location proc/kcore: Remove unused kclist_add_remap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Three non-regression fixes. - Our optimised memcmp could read past the end of one of the buffers and potentially trigger a page fault leading to an oops. - Some of our code to read energy management data on PowerVM had an endian bug leading to bogus results. - When reporting a machine check exception we incorrectly reported TLB multihits as D-Cache multhits due to a missing entry in the array of causes. Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar, Segher Boessenkool, Vaidyanathan Srinivasan" * tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/mce: Fix misleading print for TLB mutlihit powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes powerpc/64: Fix memcmp reading past the end of src/dest
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that caused regression - Fix MAINTAINER file uniphier-mdmac.c file path * tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma: MAINTAINERS: Fix uniphier-mdmac.c file path dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
-
- 30 Mar, 2019 10 commits
-
-
Linus Torvalds authored
Merge tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: - fix refcnt leak on interface rename - use memcpy in device_name_store() to avoid including garbage from a previous, longer value in the device_name - fix a potential NULL pointer dereference in case of_match_device() cannot find a match * tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: trigger: netdev: use memcpy in device_name_store leds: pca9532: fix a potential NULL pointer dereference leds: trigger: netdev: fix refcnt leak on interface rename
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "As you can see [in the git history] I was away on leave and Bartosz kindly stepped in and collected a slew of fixes, I pulled them into my tree in two sets and merged some two more fixes (fixing my own caused bugs) on top. Summary: - Revert the extended use of gpio_set_config() and think about how we can do this properly. - Fix up the SPI CS GPIO handling so it now works properly on the SPI bus children, as intended. - Error paths and driver fixes" * tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mockup: use simple_read_from_buffer() in debugfs read callback gpio: of: Fix of_gpiochip_add() error path gpio: of: Check for "spi-cs-high" in child instead of parent node gpio: of: Check propname before applying "cs-gpios" quirks gpio: mockup: fix debugfs read Revert "gpio: use new gpio_set_config() helper in more places" gpio: aspeed: fix a potential NULL pointer dereference gpio: amd-fch: Fix bogus SPDX identifier gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input gpio: exar: add a check for the return value of ida_simple_get fails
-
Rasmus Villemoes authored
If userspace doesn't end the input with a newline (which can easily happen if the write happens from a C program that does write(fd, iface, strlen(iface))), we may end up including garbage from a previous, longer value in the device_name. For example # cat device_name # printf 'eth12' > device_name # cat device_name eth12 # printf 'eth3' > device_name # cat device_name eth32 I highly doubt anybody is relying on this behaviour, so switch to simply copying the bytes (we've already checked that size is < IFNAMSIZ) and unconditionally zero-terminate it; of course, we also still have to strip a trailing newline. This is also preparation for future patches. Fixes: 06f502f5 ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
-
Kangjie Lu authored
In case of_match_device cannot find a match, return -EINVAL to avoid NULL pointer dereference. Fixes: fa4191a6 ("leds: pca9532: Add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.1-rc3, and one driver removal. The biggest thing here is the removal of the mt7621-eth driver as a "real" network driver was merged in 5.1-rc1 for this hardware, so this old driver can now be removed. Other than that, there are just a number of small fixes, all resolving reported issues and some potential corner cases for error handling paths. All of these have been in linux-next with no reported issues" * tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: Remove vif check from vnt_interrupt staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir() staging: octeon-ethernet: fix incorrect PHY mode staging: vc04_services: Fix an error code in vchiq_probe() staging: erofs: fix error handling when failed to read compresssed data staging: vt6655: Fix interrupt race condition on device start up. staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc staging: rtl8712: uninitialized memory in read_bbreg_hdl() staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc staging, mt7621-pci: fix build without pci support staging: speakup_soft: Fix alternate speech with other synths staging: axis-fifo: add CONFIG_OF dependency staging: olpc_dcon_xo_1: add missing 'const' qualifier staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest staging: erofs: fix to handle error path of erofs_vmap() staging: mt7621-dts: update ethernet settings. staging: remove mt7621-eth
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.1-rc3. Nothing major here, just a number of potential problems fixes for error handling paths, as well as some other minor bugfixes for reported issues with 5.1-rc1. All of these have been in linux-next with no reported issues" * tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix NULL pointer issue when tty_port ops is not set Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc dt-bindings: serial: Add compatible for Mediatek MT8183 tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped tty/serial: atmel: Add is_half_duplex helper serial: sh-sci: Fix setting SCSCR_TIE while transferring data serial: ar933x_uart: Fix build failure with disabled console tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() tty: mxs-auart: fix a potential NULL pointer dereference tty: atmel_serial: fix a potential NULL pointer dereference serial: max310x: Fix to avoid potential NULL pointer dereference serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.1-rc3. Nothing major at all here, just a small collection of fixes for reported issues, and potential problems with error handling paths. Also a few new device ids, as normal. All of these have been in linux-next with no reported issues" * tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Olicard 600 USB: serial: cp210x: add new device id usb: u132-hcd: fix resource leak usb: cdc-acm: fix race during wakeup blocking TX traffic usb: mtu3: fix EXTCON dependency usb: usb251xb: fix to avoid potential NULL pointer dereference usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs xhci: Don't let USB3 ports stuck in polling state prevent suspend usb: xhci: dbc: Don't free all memory with spinlock held xhci: Fix port resume done detection for SS ports with LPM enabled USB: serial: mos7720: fix mos_parport refcount imbalance on error path USB: gadget: f_hid: fix deadlock in f_hidg_write() usb: gadget: net2272: Fix net2272_dequeue() usb: gadget: net2280: Fix net2280_dequeue() usb: gadget: net2280: Fix overrun of OUT messages usb: dwc3: pci: add support for Comet Lake PCH ID usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0 usb: common: Consider only available nodes for dr_mode usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "This corrects a previous attempt to make Linux use its own set of ACPI debug flags different from the upstream ACPICA's default (Erik Schmauss)" * tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: use different default debug value than ACPICA
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix CPU base frequency reporting in the intel_pstate driver and a use-after-free in the scpi-cpufreq driver. Specifics: - Fix the ACPI CPPC library to actually follow the specification when decoding the guaranteed performance register information and make the intel_pstate driver to fall back to the nominal frequency when reporting the base frequency if the guaranteed performance register information is not there (Srinivas Pandruvada). - Fix use-after-free in the exit callback of the scpi-cpufreq left after an update during the 5.0 development cycle (Vincent Stehlé)" * tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: scpi: Fix use after free cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency ACPI / CPPC: Fix guaranteed performance handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security layer fixes from James Morris: "Yama and LSM config fixes" * 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig" Yama: mark local symbols as static
-
- 29 Mar, 2019 4 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links fs: fs_parser: fix printk format warning checkpatch: add %pt as a valid vsprintf extension mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate drivers/block/zram/zram_drv.c: fix idle/writeback string compare mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate() mm/memory_hotplug.c: fix notification in offline error path ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK fs/proc/kcore.c: make kcore_modules static include/linux/list.h: fix list_is_first() kernel-doc mm/debug.c: fix __dump_page when mapping->host is not set mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified include/linux/hugetlb.h: convert to use vm_fault_t iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging mm: add support for kmem caches in DMA32 zone ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock mm/hotplug: fix offline undo_isolate_page_range() fs/open.c: allow opening only regular files during execve() mailmap: add Changbin Du mm/debug.c: add a cast to u64 for atomic64_read() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Catalin Marinas: "Use memblock_alloc() instead of memblock_alloc_low() in request_standard_resources(), the latter being limited to the low 4G memory range on arm64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: replace memblock_alloc_low with memblock_alloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: - Fix a bug in the AMD IOMMU driver not handling exclusion ranges correctly. In fact the driver did not reserve these ranges for IOVA allocations, so that dma-handles could be allocated in an exclusion range, leading to data corruption. Exclusion ranges have not been used by any firmware up to now, so this issue remained undiscovered for quite some time. - Fix wrong warning messages that the IOMMU core code prints when it tries to allocate the default domain for an iommu group and the driver does not support any of the default domain types (like Intel VT-d). * tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Reserve exclusion range in iova-domain iommu: Don't print warning when IOMMU driver only supports unmanaged domains
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fix from Greg KH: "Here is a single driver core patch for 5.1-rc3. After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so we can now drop this macro from include/linux/device.h so that no more new users will be created. This patch has been in linux-next for a while, with no reported issues" * tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: remove BUS_ATTR()
-