- 05 Aug, 2011 18 commits
-
-
Benjamin Herrenschmidt authored
Commit fea80311 "iomap: make IOPORT/PCI mapping functions conditional" Broke powerpc build without CONFIG_PCI as we would still define pci_iomap(), which overlaps with the new empty inline in the headers. Make our implementation conditional on CONFIG_PCI Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Commit 112d1fe9 "powerpc/4xx: Add check_link to struct ppc4xx_pciex_hwops" inadvertently broke 405 builds due to some functions being over protected by an ifdef CONFIG_44x. Move them back out. Signed-off-by:
-
Anton Blanchard authored
The VPA, SLB shadow and DTL degistration functions do not need an address, so simplify things and remove it. Also cleanup pseries_kexec_cpu_down a bit by storing the cpu IDs in local variables. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
Make the VPA, SLB shadow and DTL registration and deregistration functions print consistent messages on error. I needed the firmware error code while chasing a kexec bug but we weren't printing it. Signed-off-by:
-
Anton Blanchard authored
Recent versions of firmware will fail to unmap the virtual processor area if we have a dispatch trace log registered. This causes kexec to fail. If a trace log is registered this patch unregisters it before the SLB shadow and virtual processor areas, fixing the problem. The address argument is ignored by firmware on unregister so we may as well remove it. Signed-off-by:
-
Anatolij Gustschin authored
Grant intends to hand over maintainership of mpc5xxx to me. Change MPC5XXX entry in MAINTAINERS accordingly. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Anton Blanchard authored
KVM_GUEST adds a 1 MB array to the kernel (kvm_tmp) which grew my kernel enough to cause it to fail to boot. Dynamically allocating or reducing the size of this array is a good idea, but in the meantime I think it makes sense to make KVM_GUEST default to n in order to minimise surprises. Signed-off-by:
-
Nishanth Aravamudan authored
On a box with gcc 4.3.2, I see errors like: arch/powerpc/kvm/book3s_hv_rmhandlers.S:1254: Error: Unrecognized opcode: stxvd2x arch/powerpc/kvm/book3s_hv_rmhandlers.S:1316: Error: Unrecognized opcode: lxvd2x Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Anton Blanchard authored
The ibm,io-events code is a bit verbose with its error messages. Reverse the reporting so we only print when we successfully enable I/O event interrupts. Signed-off-by:
-
Anton Blanchard authored
We are seeing boot failures on some very large boxes even with commit b5416ca9 (powerpc: Move kdump default base address to 64MB on 64bit). This patch halves the RMO so both kernels get about the same amount of RMO memory. On large machines this region will be at least 256MB, so each kernel will get 128MB. We cap it at 256MB (small SLB size) since some early allocations need to be in the bolted SLB region. We could relax this on machines with 1TB SLBs in a future patch. Signed-off-by:
-
David Ahern authored
Panic observed on an older kernel when collecting call chains for the context-switch software event: [<b0180e00>]rb_erase+0x1b4/0x3e8 [<b00430f4>]__dequeue_entity+0x50/0xe8 [<b0043304>]set_next_entity+0x178/0x1bc [<b0043440>]pick_next_task_fair+0xb0/0x118 [<b02ada80>]schedule+0x500/0x614 [<b02afaa8>]rwsem_down_failed_common+0xf0/0x264 [<b02afca0>]rwsem_down_read_failed+0x34/0x54 [<b02aed4c>]down_read+0x3c/0x54 [<b0023b58>]do_page_fault+0x114/0x5e8 [<b001e350>]handle_page_fault+0xc/0x80 [<b0022dec>]perf_callchain+0x224/0x31c [<b009ba70>]perf_prepare_sample+0x240/0x2fc [<b009d760>]__perf_event_overflow+0x280/0x398 [<b009d914>]perf_swevent_overflow+0x9c/0x10c [<b009db54>]perf_swevent_ctx_event+0x1d0/0x230 [<b009dc38>]do_perf_sw_event+0x84/0xe4 [<b009dde8>]perf_sw_event_context_switch+0x150/0x1b4 [<b009de90>]perf_event_task_sched_out+0x44/0x2d4 [<b02ad840>]schedule+0x2c0/0x614 [<b0047dc0>]__cond_resched+0x34/0x90 [<b02adcc8>]_cond_resched+0x4c/0x68 [<b00bccf8>]move_page_tables+0xb0/0x418 [<b00d7ee0>]setup_arg_pages+0x184/0x2a0 [<b0110914>]load_elf_binary+0x394/0x1208 [<b00d6e28>]search_binary_handler+0xe0/0x2c4 [<b00d834c>]do_execve+0x1bc/0x268 [<b0015394>]sys_execve+0x84/0xc8 [<b001df10>]ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
One definition of PV_POWER7 seems enough to me. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Anton Blanchard authored
On a box with 8TB of RAM the MMU hashtable is 64GB in size. That means we have 4G PTEs. pSeries_lpar_hptab_clear was using a signed int to store the index which will overflow at 2G. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Anton Blanchard authored
I hit an oops at boot on the first instruction of timer_cpu_notify: NIP [c000000000722f88] .timer_cpu_notify+0x0/0x388 The code should look like: c000000000722f78: eb e9 00 30 ld r31,48(r9) c000000000722f7c: 2f bf 00 00 cmpdi cr7,r31,0 c000000000722f80: 40 9e ff 44 bne+ cr7,c000000000722ec4 c000000000722f84: 4b ff ff 74 b c000000000722ef8 c000000000722f88 <.timer_cpu_notify>: c000000000722f88: 7c 08 02 a6 mflr r0 c000000000722f8c: 2f a4 00 07 cmpdi cr7,r4,7 c000000000722f90: fb c1 ff f0 std r30,-16(r1) c000000000722f94: fb 61 ff d8 std r27,-40(r1) But the oops output shows: eb61ffd8 eb81ffe0 eba1ffe8 ebc1fff0 7c0803a6 ebe1fff8 4e800020 00000000 ebe90030 c0000000 00ad0a28 00000000 2fa40007 fbc1fff0 fb61ffd8 So we scribbled over our instructions with c000000000ad0a28, which is an address inside the jump_table ELF section. It turns out the jump_table section is only aligned to 8 bytes but we are aligning our entries within the section to 16 bytes. This means our entries are offset from the table: c000000000acd4a8 <__start___jump_table>: ... c000000000ad0a10: c0 00 00 00 lfs f0,0(0) c000000000ad0a14: 00 70 cd 5c .long 0x70cd5c c000000000ad0a18: c0 00 00 00 lfs f0,0(0) c000000000ad0a1c: 00 70 cd 90 .long 0x70cd90 c000000000ad0a20: c0 00 00 00 lfs f0,0(0) c000000000ad0a24: 00 ac a4 20 .long 0xaca420 And the jump table sort code gets very confused and writes into the wrong spot. Remove the alignment, and also remove the padding since we it saves some space and we shouldn't need it. Signed-off-by: -
Anton Blanchard authored
Add a newline to the panic messages in make_room. Also fix a comment that suggested our chunk size is 4Mb. It's 1MB. Signed-off-by:
-
Anton Blanchard authored
I have a box that fails in OF during boot with: DEFAULT CATCH!, exception-handler=fff00400 at %SRR0: 49424d2c4c6f6768 %SRR1: 800000004000b002 ie "IBM,Logh". OF got corrupted with a device tree string. Looking at make_room and alloc_up, we claim the first chunk (1 MB) but we never claim any more. mem_end is always set to alloc_top which is the top of our available address space, guaranteeing we will never call alloc_up and claim more memory. Also alloc_up wasn't setting alloc_bottom to the bottom of the available address space. This doesn't help the box to boot, but we at least fail with an obvious error. We could relocate the device tree in a future patch. Signed-off-by:
-
Scott Wood authored
Commit af9eef3c caused cpu_setup to see the_cpu_spec, rather than the source struct. However, on 32-bit, the return value of identify_cpu was being used for feature fixups, and identify_cpu was returning the source struct. So if cpu_setup patches the feature bits, the update won't affect the fixups. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
Add a cast in case the caller passes in a different type, as it would if mtspr/mtmsr were functions. Previously, if a 64-bit type was passed in on 32-bit, GCC would bind the constraint to a pair of registers, and would substitute the first register in the pair in the asm code. This corresponds to the upper half of the 64-bit register, which is generally not the desired behavior. Signed-off-by:
-
- 04 Aug, 2011 22 commits
-
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: Revert "dt: add of_alias_scan and of_alias_get_id" dt: remove of_alias_get_id() reference
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] wire up sendmmsg syscall [PARISC] fix return type of __atomic64_add_return [PARISC] Fix futex support
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] signal: use set_restore_sigmask() helper [S390] smp: remove pointless comments in startup_secondary() [S390] qdio: Use kstrtoul_from_user [S390] sclp_async: Use kstrtoul_from_user [S390] exec: remove redundant set_fs(USER_DS) [S390] cpu hotplug: on cpu start wait until being marked active [S390] signal: convert to use set_current_blocked() [S390] asm offsets: fix coding style [S390] Add support for IBM zEnterprise 114 [S390] dasd: check if raw track access is supported [S390] Use diagnose 308 for system reset [S390] Export store_status() function [S390] dasd: use vmalloc for statistics input buffer [S390] Add PSW restart shutdown trigger [S390] missing return in page_table_alloc_pgste [S390] qdio: 2nd stage retry on SIGA-W busy conditions
-
Arnaud Lacombe authored
While `pci_eisa_driver' still refer `pci_eisa_init', the .probe() function should not be called after init memory release, as pointed out by commit 74b9a297. The structure is still referenced in the drivers subsystem, and can be accesseed through sysfs, so the modpost warning is a false positive. Mark it as such. In the same time, the warning referenced in 005bdad7 did only mention `pci_eisa_driver', not `pci_eisa_pci_tbl', so remove its marking. Broken-by: Arnaud Lacombe <lacombar@gmail.com> (in 005bdad7) Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Arnaud Lacombe <lacombar@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Grant Likely authored
This reverts commit 750f463a. of_alias_* still needs work to be generalized for 'promtree' dt platforms, and to no implicitly create entries for available ids. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
Grant Likely authored
of_alias_get_id() is broken and being reverted. Remove the reference to it and replace with a single incrementing id number. There is no risk of regression here on the imx driver since the imx change to use of_alias_get_id() is commit 22698aa2, "serial/imx: add device tree probe support" which is new for v3.1, and it won't get used unless CONFIG_OF is enabled and the board is booted using a device tree. A single incrementing integer is sufficient for now. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org>
-
Linus Torvalds authored
The core device layer sends tons of uevent notifications for each device it finds, and if the kernel has been built with a non-empty CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode helper binary for all these events very early in the boot. Not only won't the root filesystem even be mounted at that point, we literally won't have necessarily even initialized all the process handling data structures at that point, which causes no end of silly problems even when the usermode helper doesn't actually succeed in executing. So just use our existing infrastructure to disable the usermodehelpers to make the kernel start out with them disabled. We enable them when we've at least initialized stuff a bit. Problems related to an uninitialized init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex reported by various people. Reported-by:
Manuel Lauss <manuel.lauss@googlemail.com> Reported-by:
Richard Weinberger <richard@nod.at> Reported-by:
Marc Zyngier <maz@misterjones.org> Acked-by:
Kay Sievers <kay.sievers@vrfy.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Linus Torvalds authored
Dmitry Kasatkin reports: "kernel-devel package with kernel headers have no <include/xen> directory if XEN is disabled. Modules which inclide asm/io.h won't compile. XEN related content is behind the CONFIG_XEN flag in the io.h. And <xen/xen.h> should be also behind CONFIG_XEN flag." So move the include of <xen/xen.h> down into the section that is conditional on CONFIG_XEN. Reported-by:
Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad7879 - fix deficient device disable Input: gpio_keys - fix two typos in devicetree documentation Input: mma8450 - add device tree probe support Input: gpio_keys - return proper error code if memory allocation fails Input: lm8323 - add missing device_remove_file for dev_attr_time Input: tegra-kbc - fix computation of polling time Input: kxtj9 - explicitly include module.h Input: psmouse - hgpk.c needs module.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6Linus Torvalds authored
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: cpuidle: stop depending on pm_idle x86 idle: move mwait_idle_with_hints() to where it is used cpuidle: replace xen access to x86 pm_idle and default_idle cpuidle: create bootparam "cpuidle.off=1" mrst_pmu: driver for Intel Moorestown Power Management Unit
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'apei-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI, APEI, EINJ Param support is disabled by default APEI GHES: 32-bit buildfix ACPI: APEI build fix ACPI, APEI, GHES: Add hardware memory error recovery support HWPoison: add memory_failure_queue() ACPI, APEI, GHES, Error records content based throttle ACPI, APEI, GHES, printk support for recoverable error via NMI lib, Make gen_pool memory allocator lockless lib, Add lock-less NULL terminated single list Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG ACPI, APEI, Add WHEA _OSC support ACPI, APEI, Add APEI bit support in generic _OSC call ACPI, APEI, GHES, Support disable GHES at boot time ACPI, APEI, GHES, Prevent GHES to be built as module ACPI, APEI, Use apei_exec_run_optional in APEI EINJ and ERST ACPI, APEI, Add apei_exec_run_optional ACPI, APEI, GHES, Do not ratelimit fatal error printk before panic ACPI, APEI, ERST, Fix erst-dbg long record reading issue ACPI, APEI, ERST, Prevent erst_dbg from loading if ERST is disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data target: Fix bug for transport_generic_wait_for_tasks with direct operation target: iscsi_target depends on NET target: Fix WRITE_SAME_16 lba assignment breakage MAINTAINERS: Add target-devel list for drivers/target/ iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN iscsi-target: Fix uninitialized usage of cmd->pad_bytes iscsi-target: strlen() doesn't count the terminator iscsi-target: Fix NULL dereference on allocation failure
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: dt: add of_alias_scan and of_alias_get_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: use kzalloc in ext4_kzalloc()
-
Vasiliy Kulikov authored
We may optimistically check .in_use == 0 without holding the rw_mutex: it's the common case, and if it's zero, there certainly won't be any segments associated with us. After taking the lock, the idr_for_each() will do the right thing, so we could now drop the re-check inside the lock without any real cost. But it won't hurt. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
-
Vasiliy Kulikov authored
Commit 4c677e2e ("shm: optimize locking and ipc_namespace getting") introduced a copy-paste bug. Due to the bug cycle optimizations were disabled. Signed-off-by:
-
Robert P. J. Day authored
Expand the fs/Kconfig "help" info to clarify why it's a bad idea to deselect the TMPFS_POSIX_ACL config variable. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
Make the radix_tree exceptional cases, mostly in filemap.c, clearer. It's hard to devise a suitable snappy name that illuminates the use by shmem/tmpfs for swap, while keeping filemap/pagecache/radix_tree generality. And akpm points out that /* radix_tree_deref_retry(page) */ comments look like calls that have been commented out for unknown reason. Skirt the naming difficulty by rearranging these blocks to handle the transient radix_tree_deref_retry(page) case first; then just explain the remaining shmem/tmpfs swap case in a comment. Signed-off-by:
-
Hugh Dickins authored
We have already acknowledged that swapoff of a tmpfs file is slower than it was before conversion to the generic radix_tree: a little slower there will be acceptable, if the hotter paths are faster. But it was a shock to find swapoff of a 500MB file 20 times slower on my laptop, taking 10 minutes; and at that rate it significantly slows down my testing. Now, most of that turned out to be overhead from PROVE_LOCKING and PROVE_RCU: without those it was only 4 times slower than before; and more realistic tests on other machines don't fare as badly. I've tried a number of things to improve it, including tagging the swap entries, then doing lookup by tag: I'd expected that to halve the time, but in practice it's erratic, and often counter-productive. The only change I've so far found to make a consistent improvement, is to short-circuit the way we go back and forth, gang lookup packing entries into the array supplied, then shmem scanning that array for the target entry. Scanning in place doubles the speed, so it's now only twice as slow as before (or three times slower when the PROVEs are on). So, add radix_tree_locate_item() as an expedient, once-off, single-caller hack to do the lookup directly in place. #ifdef it on CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited applicability as save space in other configurations. And, sadly, #include sched.h for cond_resched(). Signed-off-by:
-
Hugh Dickins authored
Remove PageSwapBacked (!page_is_file_cache) cases from add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now go through shmem_add_to_page_cache(). Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(), and add a comment on swap entries to invalidate_mapping_pages(). And mincore_page() uses find_get_page() on what might be shmem or a tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef). Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Hugh Dickins authored
But we've not yet removed the old swp_entry_t i_direct[16] from shmem_inode_info. That's because it was still being shared with the inline symlink. Remove it now (saving 64 or 128 bytes from shmem inode size), and use kmemdup() for short symlinks, say, those up to 128 bytes. I wonder why mpol_free_shared_policy() is done in shmem_destroy_inode() rather than shmem_evict_inode(), where we usually do such freeing? I guess it doesn't matter, and I'm not into NUMA mpol testing right now. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Hugh Dickins authored
Convert shmem_writepage() to use shmem_delete_from_page_cache() to use shmem_radix_tree_replace() to substitute swap entry for page pointer atomically in the radix tree. As with shmem_add_to_page_cache(), it's not entirely satisfactory to be copying such code from delete_from_swap_cache, but again judged easier to sell than making its other callers go through the extras. Remove the toy implementation's shmem_put_swap() and shmem_get_swap(), now unreferenced, and the hack to disable swap: it's now good to go. The way things have worked out, info->lock no longer helps to guard the shmem_swaplist: we increment swapped under shmem_swaplist_mutex only. That global mutex exclusion between shmem_writepage() and shmem_unuse() is not pretty, and we ought to find another way; but it's been forced on us by recent race discoveries, not a consequence of this patchset. And what has become of the WARN_ON_ONCE(1) free_swap_and_cache() if a swap entry was found already present? That's no longer possible, the (unknown) one inserting this page into filecache would hit the swap entry occupying that slot. Signed-off-by:
-
