- 15 Jul, 2020 38 commits
-
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629072525.156154-2-vaibhavgupta40@gmail.com
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In the case of adm8211, after removing PCI helper functions, .suspend() and .resume() became empty-body functions. Hence, define them NULL and use dev_pm_ops. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. The required operations are done by PCI core. PCI drivers are not expected to invoke PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state(), etc. Their tasks are completed by PCI core itself. Compile-tested only. Signed-off-by:
-
Vaibhav Gupta authored
Earlier, drivers had to manage the device's power states, and related operations, themselves. With the generic approach, these are done by PCI core. The only driver-specific jobs, .suspend() and .resume() doing were invoking PCI helper functions pci_save/restore_state() and pci_set_power_state(). This is not recommeneded as PCI core takes care of that. Hence they became empty-body functions, thus define them NULL. Compile-tested only. Signed-off-by:
-
Reto Schneider authored
In case of an error, no one will use the allocated structure. Call ieee80211_free_hw, same as in rtl_usb_disconnect. Signed-off-by:
Reto Schneider <code@reto-schneider.ch> Signed-off-by:
-
Reto Schneider authored
If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by:
-
Reto Schneider authored
Prevent code from calling itself indirectly, causing the driver to hang and consume 100% CPU. Without this fix, the following script can bring down a single CPU system: ``` while true; do rmmod rtl8192cu modprobe rtl8192cu done ``` Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Kees Cook authored
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just initialize this variable to NULL, and avoid sending garbage by returning. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: dc0313f4 ("rtlwifi: rtl8192cu: Add routine hw") Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just initialize this variable to NULL. No later NULL deref is possible due to the early returns outside of the (phy->rev >= 7 && phy->rev < 19) case, which explicitly tests for NULL. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: 58619b14 ("b43: move under broadcom vendor directory") Signed-off-by:
-
Flavio Suligoi authored
Fix typo: "EZUSB_REQUEST_TRIGER" --> "EZUSB_REQUEST_TRIGGER" Signed-off-by:
Flavio Suligoi <f.suligoi@asem.it> Signed-off-by:
-
Larry Finger authored
Sparse reports the following issue: CHECK drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:500:26: warning: incorrect type in initializer (different base types) drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:500:26: expected restricted __le32 [usertype] *pdesc drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:500:26: got unsigned int [usertype] * Signed-off-by:
-
Larry Finger authored
Sparse reports the following endian issues: CHECK drivers/net/wireless/realtek/rtlwifi/ps.c drivers/net/wireless/realtek/rtlwifi/ps.c:772:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:772:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:775:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:775:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:778:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:778:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:867:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:867:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:870:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:870:42: warning: cast to restricted __le32 drivers/net/wireless/realtek/rtlwifi/ps.c:873:42: warning: restricted __le32 degrades to integer drivers/net/wireless/realtek/rtlwifi/ps.c:873:42: warning: cast to restricted __le32 Signed-off-by:
-
Flavio Suligoi authored
In some b43 files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
Flavio Suligoi authored
In at76c50x-usb.c the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
Flavio Suligoi authored
The wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
Zong-Zhe Yang authored
Add a set of logic with corresponding coexistence parameters to handle the situation under BT inquiry/page. We will set PSTDMA while WL-Busy + BT inquiry/page to separate WL/BT slots. PSTDMA can protect WL data rate and BT performance. If WL-Busy + BT inquiry/page and there was BT device paired, We will set the mechanism to 4Slot PSTDMA. In 4Slot PSTDMA, the paired devices can perform more smoothly and prevent some issues trigger from insufficient data. And to avoid A2DP glitch or disconnection, we will adjust ACL data priority higher than inquiry/page. In addition, we found sometimes BT inquiry/page still working last for seconds after BT had notified inquiry/page finished. It will lead to A2DP glitch cause of ACL data, inquiry/page priority toggled. To fix the corner, we add a timer to remain the inquiry/page status. And we found WL busy/idle threshold is too sensitive, it will keep switching in some weak network environment and coexistence mechanism will switch between TDMA and PSTDMA. The very frequently switching may destroyed not only the handshake with AP, but BT performance. And it will trigger some unexpected error. To prevent the frequently switching, we add a timer to delay the status change while WL busy switch to idle. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
-
Dan Carpenter authored
The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
-
Pali Rohár authored
ENOTSUPP (double PP) is internal linux kernel code 524 available only in kernel include file linux/errno.h and not exported to userspace. EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not supported' available via kernel include file uapi/asm-generic/errno.h. ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace include file bits/errno.h and not available in kernel. Because Linux kernel does not support ENOTSUP (single P) and because userspace does not support ENOTSUPP (double PP), report error code for 'operation not supported' via EOPNOTSUPP macro. This patch fixes problem that mwifiex kernel driver sends to userspace unsupported error codes like: "failed: -524 (No error information)". After applying this patch userspace see: "failed: -95 (Not supported)". Signed-off-by:
Pali Rohár <pali@kernel.org> Acked-by:
-
Tony Lindgren authored
No need to take a spinlock here for bitops. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
We currently have a collection of flags and locking between the threaded irq and tx work: - wl->flags bitops - wl->mutex - wl->wl_lock spinlock The bitops flags do not need a spinlock around them, and we only need the spinlock to see if we need to queue tx work or not. And wlcore_irq() holds the mutex. To simplify the locking, we can use spin_trylock and always queue tx work unless we know there's nothing to do. Let's also update the comment a bit while at it. Signed-off-by:
-
Tony Lindgren authored
We currently have a collection of flags and locking between the threaded irq and tx work: - wl->flags bitops - wl->mutex - wl->wl_lock spinlock The bitops flags do not need a spinlock around them, and wlcore_irq() already holds the mutex calling wlcore_irq_locked(). And we only need the spinlock to see if we need to run the queue or not. To simplify the locking, we can use spin_trylock and always run the tx queue unless we know there's nothing to do. Signed-off-by:
-
Tony Lindgren authored
We can simplify the runtime resume ELP path by always setting and clearing the completion in runtime resume. This way we can test for WL1271_FLAG_IRQ_RUNNING after the resume write to see if we need completion at all. And in wlcore_irq(), we need to take spinlock for running the completion and for the pm_wakeup_event(). Spinlock is not needed around the bitops flags check for WL1271_FLAG_SUSPENDED so the spinlocked sections get shorter. Signed-off-by:
-
Pali Rohár authored
This macro is already used in mwifiex driver for specifying upper limit and is defined to value 3. So use it also in struct ieee80211_iface_limit. Signed-off-by:
-
Yan-Hsuan Chuang authored
A new RFE type 6 of RTL8822CE is released, add it in the RFE type definition. Signed-off-by:
-
Aaron Ma authored
New device ID 0xc82f found on Lenovo ThinkCenter. Tested it with c822 driver, works good. PCI id: 03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:c82f] Subsystem: Lenovo Device [17aa:c02f] Signed-off-by:Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Yan-Hsuan Chuang authored
Some platforms cannot read the DBI register successfully for the ASPM settings. After the read failed, the bus could be unstable, and the device just became unavailable [1]. For those platforms, the ASPM should be disabled. But as the ASPM can help the driver to save the power consumption in power save mode, the ASPM is still needed. So, add a module parameter for them to disable it, then the device can still work, while others can benefit from the less power consumption that brings by ASPM enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=206411 [2] Note that my lenovo T430 is the same. Fixes: 3dff7c6e ("rtw88: allows to enable/disable HCI link PS mechanism") Signed-off-by:
-
Tzu-En Huang authored
Since 8821C code is ready, we can build it. Signed-off-by:
Tzu-En Huang <tehuang@realtek.com> Signed-off-by:
-
Tzu-En Huang authored
Since single rf path chips don't support TX SPBC, tell mac80211 to not advertise it. Signed-off-by:
-
Tzu-En Huang authored
Beamforming is used for directional signal transmission/reception. Beamformee plays the role for signal reception, and makes the RX performance better in middle distance range. Implement beamformee related callbacks for 8821c. Since 8821c only support 1ss rate, nc_index in beamformee setting needs to be adjusted based on the capability. Signed-off-by:
-
Tzu-En Huang authored
The TX power requires to be adjusted based on the thermal value. The actual power will decrease if the thermal value raised, and will increase if the thermal value lowered. Driver comapres the thermal value, as moving averages. If it changes over a limit, driver will modify the TX power index to compensate. Implement rtw_chip_ops::pwr_track() for 8821c. Signed-off-by:
-
Tzu-En Huang authored
CCK PD can reduce the number of false alarm of the CCK rates. It dynamically adjusts the power threshold and CS ratio. The values are compared to the values of the previous level, if the level is changed, set new values of power threshold and CS ratio. Implement rtw_chip_ops::cck_pd_set() for 8821c. Signed-off-by:
-
Tzu-En Huang authored
In order to get a better TX EVM, do calibration after association. The calibration needed for 8821c is the IQK, which is done in the firmware. Implement the rtw_chip_ops::phy_calibration() to trigger firmware to calibrate. Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Tzu-En Huang authored
False alarm statistics can be used to adjust the RX gain. This helps the driver to adapt to different circumstances. Implement rtw_chip_ops::false_alarm_statistics() for 8821c. Reviewed-by:
-
Tzu-En Huang authored
Some RX packets contain also information about environment status. Implement rtw_chip_ops::query_rx_desc() for 8821c. Parse the RX descriptor which describes the current condition of the received packet. Reviewed-by:
-
Tzu-En Huang authored
8821c is capable of 2.4G and 5G. Implement rtw_chip_ops::set_channel() to set 2G and 5G channels. This includes MAC, BB and RF related settings. Reviewed-by:
-
Tzu-En Huang authored
To improve user experience in field, we need DIG to adjust RX initial gain depends on field situation. Define the register addresses for 8821c. Reviewed-by:
-
Tzu-En Huang authored
To configure the transmit power of 8821c implement trasmit power index setting callback function for 8821c. This is very similar to the callback function of 8822b. Reviewed-by:
-
Tzu-En Huang authored
RTL8821CE chipsets are 802.11ac dual-band WiFi + BT combo chips. This patch adds the basic functions such as parameter tables, chip information, power on flow. Reviewed-by:
-
- 14 Jul, 2020 2 commits
-
-
Luc Van Oostenryck authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type defining 'NETDEV_TX_OK' but this driver returns '0' instead of 'NETDEV_TX_OK'. Fix this by returning 'NETDEV_TX_OK' instead of '0'. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Ajay Singh authored
Added version number info along with firmware name so driver can pick the correct revision of FW file. Moved FW filename macro as part of driver code & added MODULE_FIRMWARE to specify FW needed by module. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
