- 27 May, 2010 40 commits
-
-
Alexandre Bounine authored
Add switch access locking during RapidIO discovery. Access lock is required when reading switch routing table contents due to indexed mechanism of RT addressing. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Tested-by:
Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Extentions to RapidIO switch support: 1. modify switch route operation declarations to allow using single switch-specific file for family of switches that share the same route table operations. 2. add standard route table operations for switches that that support route table manipulation registers as defined in the Rev.1.3 of RapidIO specification. 3. add clear-route-table operation for switches 4. add CPSxx and TSIxxx families of RapidIO switches Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by:
-
Marco Stornelli authored
Ramoops, like mtdoops, can log oops/panic information but in RAM. It can be used with persistent RAM for systems without flash support. In addition, for this systems, with this driver, it's no more needed add to the kernel the mtd subsystem with advantage in footprint. It can be used in a very easy way with persistent RAM for systems without flash support. For these systems, with this driver, it is no longer required to cinlude mtd subsystem with an advantage in footprint. In addition, you can save flash space and store this information only in RAM. Signed-off-by:
Marco Stornelli <marco.stornelli@gmail.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc; Anders Grafstrom <anders.grafstrom@netinsight.net> Cc: Yuasa Yoichi <yuasa@linux-mips.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by:
-
Jiri Kosina authored
If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by:
-
Myron Stowe authored
Update core IPMI driver printk()'s with dev_printk(), and its constructs, to provide additional device topology information. An example of the additional device topology for a PNP device - ipmi_si 00:02: probing via ACPI ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, ... ipmi_si 00:02: IPMI kcs interface initialized and for a PCI device - ipmi_si 0000:01:04.6: probing via PCI ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spaci... ipmi_si 0000:01:04.6: IPMI kcs interface initialized [minyard@acm.org: rework to fix rejects, extended it a bit] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Myron Stowe <myron.stowe@hp.com> Signed-off-by:
-
Myron Stowe authored
Convert PNP patch (git 9e368fa0) to maintain a pointer to a PNP device, 'pnp_dev', instead of the ACPI device, 'acpi_dev', that is currently being tracked with PNP based IPMI device discovery. Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Acked-by:
-
Corey Minyard authored
The timeouts in IPMI are in the 1-5 second range in message handling, so a 1 second timeout is a reasonable thing to do. This should help with reducing power consumption on idle systems. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Matthew Garrett authored
Some odd systems may have multiple BMCs, and we want to be able to support them. Let's make the assumption that if a system legitimately has multiple BMCs then each BMC's SI will be of the same type, and also that we won't see multiple SIs of the same type unless we have multiple BMCs. If these hold true then we should register all SIs of the same type. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Matthew Garrett authored
We can reasonably alter the poll rate depending on whether we're performing a transaction or merely waiting for an event. Signed-off-by:
-
Matthew Garrett authored
If we're not currently in the middle of a transaction, and if we have interrupts, there's no real reason to poll the controller more frequently than the core IPMI code does. Set the interrupt_disabled flag appropriately as the interrupt state changes, and make the timeout code reset itself only if the transaction is incomplete or we have no interrupts. Signed-off-by:
-
Matthew Garrett authored
The ipmi spec provides an ordering for si discovery. Change the driver to match, with the exception of preferring smbios to SPMI as HPs (at least) contain accurate information in the former but not the latter. Signed-off-by:
-
Matthew Garrett authored
Only register one si per bmc. Use any user-provided devices first, followed by the first device with an irq, followed by the first device discovered. Signed-off-by:
-
Matthew Garrett authored
The ipmi spec indicates that we should only make use of one si per bmc, so separate device discovery and registration to make that possible. [thenzl@redhat.com: fix mutex use] Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Matthew Garrett authored
Switch from a char* to an enum to identify the address source of SIs, making it easier to handle them appropriately during registration. Signed-off-by:
-
Julia Lawall authored
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by:
-
Manfred Spraul authored
ipc/sem.c begins with a 15 year old description about bugs in the initial implementation in Linux-1.0. The patch replaces that with a top level description of the current code. A TODO could be derived from this text: The opengroup man page for semop() does not mandate FIFO. Thus there is no need for a semaphore array list of pending operations. If - this list is removed - the per-semaphore array spinlock is removed (possible if there is no list to protect) - sem_otime is moved into the semaphores and calculated on demand during semctl() then the array would be read-mostly - which would significantly improve scaling for applications that use semaphore arrays with lots of entries. The price would be expensive semctl() calls: for(i=0;i<sma->sem_nsems;i++) spin_lock(sma->sem_lock); <do stuff> for(i=0;i<sma->sem_nsems;i++) spin_unlock(sma->sem_lock); I'm not sure if the complexity is worth the effort, thus here is the documentation of the current behavior first. Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Manfred Spraul authored
Cacheline align the spinlock for sysv semaphores. Without the patch, the spinlock and sem_otime [written by every semop that modified the array] and sem_base [read in the hot path of try_atomic_semop()] can be in the same cacheline. Signed-off-by:
-
Manfred Spraul authored
The wake-up part of semtimedop() consists out of two steps: - the right tasks must be identified. - they must be woken up. Right now, both steps run while the array spinlock is held. This patch reorders the code and moves the actual wake_up_process() behind the point where the spinlock is dropped. The code also moves setting sem->sem_otime to one place: It does not make sense to set the last modify time multiple times. [akpm@linux-foundation.org: repair kerneldoc] [akpm@linux-foundation.org: fix uninitialised retval] Signed-off-by:
-
Manfred Spraul authored
The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by:
-
Imre Deak authored
Currently idr_remove_all will fail with a use after free error if idr::layers is bigger than 2, which on 32 bit systems corresponds to items more than 1024. This is due to stepping back too many levels during backtracking. For simplicity let's assume that IDR_BITS=1 -> we have 2 nodes at each level below the root node and each leaf node stores two IDs. (In reality for 32 bit systems IDR_BITS=5, with 32 nodes at each sub-root level and 32 IDs in each leaf node). The sequence of freeing the nodes at the moment is as follows: layer 1 -> a(7) 2 -> b(3) c(5) 3 -> d(1) e(2) f(4) g(6) Until step 4 things go fine, but then node c is freed, whereas node g should be freed first. Since node c contains the pointer to node g we'll have a use after free error at step 6. How many levels we step back after visiting the leaf nodes is currently determined by the msb of the id we are currently visiting: Step 1. node d with IDs 0,1 is freed, current ID is advanced to 2. msb of the current ID bit 1. This means we need to step back 1 level to node b and take the next sibling, node e. 2-3. node e with IDs 2,3 is freed, current ID is 4, msb is bit 2. This means we need to step back 2 levels to node a, freeing node b on the way. 4-5. node f with IDs 4,5 is freed, current ID is 6, msb is still bit 2. This means we again need to step back 2 levels to node a and free c on the way. 6. We should visit node g, but its pointer is not available as node c was freed. The fix changes how we determine the number of levels to step back. Instead of deducting this merely from the msb of the current ID, we should really check if advancing the ID causes an overflow to a bit position corresponding to a given layer. In the above example overflow from bit 0 to bit 1 should mean stepping back 1 level. Overflow from bit 1 to bit 2 should mean stepping back 2 levels and so on. The fix was tested with IDs up to 1 << 20, which corresponds to 4 layers on 32 bit systems. Signed-off-by:Imre Deak <imre.deak@nokia.com> Reviewed-by:
Tejun Heo <tj@kernel.org> Cc: Eric Paris <eparis@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: <stable@kernel.org> [2.6.34.1] Signed-off-by:
-
Lai Jiangshan authored
Since when CONFIG_HOTPLUG_CPU=n, get_online_cpus() do nothing, so we don't need cpu_hotplug_begin() either. This patch moves cpu_hotplug_begin()/cpu_hotplug_done() into the code block of CONFIG_HOTPLUG_CPU=y. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Akinobu Mita authored
I used this module to test the series of modification to the cpu notifiers code. Example1: inject CPU offline error (-1 == -EPERM) # modprobe cpu-notifier-error-inject cpu_down_prepare_error=-1 # echo 0 > /sys/devices/system/cpu/cpu1/online bash: echo: write error: Operation not permitted Example2: inject CPU online error (-2 == -ENOENT) # modprobe cpu-notifier-error-inject cpu_up_prepare_error=-2 # echo 1 > /sys/devices/system/cpu/cpu1/online bash: echo: write error: No such file or directory [akpm@linux-foundation.org: fix Kconfig help text] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for raid5. Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for s390. Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for ehca. Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for iucv. Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for slab. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for kernel/*.c Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for topology. Signed-off-by:
-
Akinobu Mita authored
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for msr, cpuid, and therm_throt. Signed-off-by:
-
Akinobu Mita authored
This changes notifier_from_errno(0) to be NOTIFY_OK instead of NOTIFY_STOP_MASK | NOTIFY_OK. Currently, the notifiers which return encapsulated errno value have to do something like this: err = do_something(); // returns -errno if (err) return notifier_from_errno(err); else return NOTIFY_OK; This change makes the above code simple: err = do_something(); // returns -errno return return notifier_from_errno(err); Signed-off-by:
-
Akinobu Mita authored
Currently, onlining or offlining a CPU failure by one of the cpu notifiers error always cause -EINVAL error. (i.e. writing 0 or 1 to /sys/devices/system/cpu/cpuX/online gets EINVAL) To get better error reporting rather than always getting -EINVAL, This changes cpu_notify() to return -errno value with notifier_to_errno() and fix the callers. Now that cpu notifiers can return encapsulate errno value. Currently, all cpu hotplug notifiers return NOTIFY_OK, NOTIFY_BAD, or NOTIFY_DONE. So cpu_notify() can returns 0 or -EPERM with this change for now. (notifier_to_errno(NOTIFY_OK) == 0, notifier_to_errno(NOTIFY_DONE) == 0, notifier_to_errno(NOTIFY_BAD) == -EPERM) Forthcoming patches convert several cpu notifiers to return encapsulate errno value with notifier_from_errno(). Signed-off-by:
-
Akinobu Mita authored
No functional change. These are just wrappers of raw_cpu_notifier_call_chain. Signed-off-by:
-
Wu Fengguang authored
Extend KCORE_TEXT to cover the pages between _text and _stext, to allow examining some important page table pages. `readelf -a` output on x86_64 before and after patch: Type Offset VirtAddr PhysAddr before LOAD 0x00007fff8100c000 0xffffffff81009000 0x0000000000000000 after LOAD 0x00007fff81003000 0xffffffff81000000 0x0000000000000000 The newly covered pages are: 0xffffffff81000000 <startup_64> etc. 0xffffffff81001000 <init_level4_pgt> 0xffffffff81002000 <level3_ident_pgt> 0xffffffff81003000 <level3_kernel_pgt> 0xffffffff81004000 <level2_fixmap_pgt> 0xffffffff81005000 <level1_fixmap_pgt> 0xffffffff81006000 <level2_ident_pgt> 0xffffffff81007000 <level2_kernel_pgt> 0xffffffff81008000 <level2_spare_pgt> Before patch, /proc/kcore shows outdated contents for the above page table pages, for example: (gdb) p level3_ident_pgt $1 = {<text variable, no debug info>} 0xffffffff81002000 <level3_ident_pgt> (gdb) p/x *((pud_t *)&level3_ident_pgt)@512 $2 = {{pud = 0x1006063}, {pud = 0x0} <repeats 511 times>} while the real content is: root@hp /home/wfg# hexdump -s 0x1002000 -n 4096 /dev/mem 1002000 6063 0100 0000 0000 8067 0000 0000 0000 1002010 0000 0000 0000 0000 0000 0000 0000 0000 * 1003000 That is, on a x86_64 box with 2GB memory, we can see first-1GB / full-2GB identity mapping before/after patch: (gdb) p/x *((pud_t *)&level3_ident_pgt)@512 before $1 = {{pud = 0x1006063}, {pud = 0x0} <repeats 511 times>} after $1 = {{pud = 0x1006063}, {pud = 0x8067}, {pud = 0x0} <repeats 510 times>} Obviously the content before patch is wrong. Signed-off-by:Wu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Amerigo Wang authored
A quick test shows these comments are obsolete, so just remove them. Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Dan Carpenter authored
I removed 3 unused assignments. The first two get reset on the first statement of their functions. For "err" in root.c we don't return an error and we don't use the variable again. Signed-off-by:
Dan Carpenter <error27@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Oleg Nesterov authored
No functional changes, just s/atomic_t count/int nr_threads/. With the recent changes this counter has a single user, get_nr_threads() And, none of its callers need the really accurate number of threads, not to mention each caller obviously races with fork/exit. It is only used to report this value to the user-space, except first_tid() uses it to avoid the unnecessary while_each_thread() loop in the unlikely case. It is a bit sad we need a word in struct signal_struct for this, perhaps we can change get_nr_threads() to approximate the number of threads using signal->live and kill ->nr_threads later. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
No functional changes. keyctl_session_to_parent() is the only user of signal->count which needs the correct value. Change it to use thread_group_empty() instead, this must be strictly equivalent under tasklist, and imho looks better. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by:
-
