- 06 Dec, 2007 1 commit
-
-
Tony Breeds authored
The commit fa13a5a1 (sched: restore deterministic CPU accounting on powerpc), unconditionally calls update_process_tick() in system context. In the deterministic accounting case this is the correct thing to do. However, in the non-deterministic accounting case we need to not do this, since doing this results in the time accounted as hardware irq time being artificially elevated. Also this collapses 2 consecutive '#ifdef CONFIG_VIRT_CPU_ACCOUNTING' checks in time.h into one for neatness. Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 05 Dec, 2007 39 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: futex: correctly return -EFAULT not -EINVAL lockdep: in_range() fix lockdep: fix debug_show_all_locks() sched: style cleanups futex: fix for futex_wait signal stack corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: VM/Security: add security hook to do_brk Security: round mmap hint address above mmap_min_addr security: protect from stack expantion into low vm addresses Security: allow capable check to permit mmap or low vm space SELinux: detect dead booleans SELinux: do not clear f_op when removing entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [LRO]: fix lro_gen_skb() alignment [TCP]: NAGLE_PUSH seems to be a wrong way around [TCP]: Move prior_in_flight collect to more robust place [TCP] FRTO: Use of existing funcs make code more obvious & robust [IRDA]: Move ircomm_tty_line_info() under #ifdef CONFIG_PROC_FS [ROSE]: Trivial compilation CONFIG_INET=n case [IPVS]: Fix sched registration race when checking for name collision. [IPVS]: Don't leak sysctl tables if the scheduler registration fails.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC]: Add missing of_node_put [SPARC64]: check for possible NULL pointer dereference [SPARC]: Add missing "space" [SPARC64]: Add missing "space" [SPARC64]: Add missing pci_dev_put [SYSCTL_CHECK]: Fix typo in KERN_SPARC_SCONS_PWROFF entry string. [SPARC64]: Missing mdesc_release() in ldc_init().
-
Al Viro authored
endianness annotations in networking code had been in place for quite a while; in particular, sin_port and s_addr are annotated as big-endian. Code in ocfs2 had __force casts added apparently to shut the sparse warnings up; of course, these days they only serve to *produce* warnings for no reason whatsoever... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
BFS_FILEBLOCKS() expects struct bfs_inode * (on-disk data, with little- endian fields), not struct bfs_inode_info * (in-core stuff, with host- endian ones). It's a macro and fields with the right names are present in bfs_inode_info, so it compiles, but on big-endian host it gives bogus results. Introduced in commit f433dc56 ("Fixes to the BFS filesystem driver"). Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Now that X86_32 is provided on Kconfig level for uml-i386, there's no need to play with it explicitly on Makefile level anymore. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Al Viro authored
access_flags_to_mode() gets on-the-wire data (little-endian) and treats it as host-endian. Introduced in commit e01b6400 ("[CIFS] enable get mode from ACL when cifsacl mount option specified") Signed-off-by:
-
Eric Paris authored
Given a specifically crafted binary do_brk() can be used to get low pages available in userspace virtual memory and can thus be used to circumvent the mmap_min_addr low memory protection. Add security checks in do_brk(). Signed-off-by:
Eric Paris <eparis@redhat.com> Acked-by:
Alan Cox <alan@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Vegard Nossum authored
I can't pass memory allocated by kmalloc() to ksize() if it is allocated by SLUB allocator and size is larger than (I guess) PAGE_SIZE / 2. The error of ksize() seems to be that it does not check if the allocation was made by SLUB or the page allocator. Reviewed-by:
Pekka Enberg <penberg@cs.helsinki.fi> Tested-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Christoph Lameter <clameter@sgi.com>, Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Alexey Dobriyan authored
Creating PDEs with refcount 0 and "deleted" flag has problems (see below). Switch to usual scheme: * PDE is created with refcount 1 * every de_get does +1 * every de_put() and remove_proc_entry() do -1 * once refcount reaches 0, PDE is freed. This elegantly fixes at least two following races (both observed) without introducing new locks, without abusing old locks, without spreading lock_kernel(): 1) PDE leak remove_proc_entry de_put ----------------- ------ [refcnt = 1] if (atomic_read(&de->count) == 0) if (atomic_dec_and_test(&de->count)) if (de->deleted) /* also not taken! */ free_proc_entry(de); else de->deleted = 1; [refcount=0, deleted=1] 2) use after free remove_proc_entry de_put ----------------- ------ [refcnt = 1] if (atomic_dec_and_test(&de->count)) if (atomic_read(&de->count) == 0) free_proc_entry(de); /* boom! */ if (de->deleted) free_proc_entry(de); BUG: unable to handle kernel paging request at virtual address 6b6b6b6b printing eip: c10acdda *pdpt = 00000000338f8001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: af_packet ipv6 cpufreq_ondemand loop serio_raw psmouse k8temp hwmon sr_mod cdrom Pid: 23161, comm: cat Not tainted (2.6.24-rc2-8c086340 #4) EIP: 0060:[<c10acdda>] EFLAGS: 00210097 CPU: 1 EIP is at strnlen+0x6/0x18 EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: 6b6b6b6b EDX: fffffffe ESI: c128fa3b EDI: f380bf34 EBP: ffffffff ESP: f380be44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process cat (pid: 23161, ti=f380b000 task=f38f2570 task.ti=f380b000) Stack: c10ac4f0 00000278 c12ce000 f43cd2a8 00000163 00000000 7da86067 00000400 c128fa20 00896b18 f38325a8 c128fe20 ffffffff 00000000 c11f291e 00000400 f75be300 c128fa20 f769c9a0 c10ac779 f380bf34 f7bfee70 c1018e6b f380bf34 Call Trace: [<c10ac4f0>] vsnprintf+0x2ad/0x49b [<c10ac779>] vscnprintf+0x14/0x1f [<c1018e6b>] vprintk+0xc5/0x2f9 [<c10379f1>] handle_fasteoi_irq+0x0/0xab [<c1004f44>] do_IRQ+0x9f/0xb7 [<c117db3b>] preempt_schedule_irq+0x3f/0x5b [<c100264e>] need_resched+0x1f/0x21 [<c10190ba>] printk+0x1b/0x1f [<c107c8ad>] de_put+0x3d/0x50 [<c107c8f8>] proc_delete_inode+0x38/0x41 [<c107c8c0>] proc_delete_inode+0x0/0x41 [<c1066298>] generic_delete_inode+0x5e/0xc6 [<c1065aa9>] iput+0x60/0x62 [<c1063c8e>] d_kill+0x2d/0x46 [<c1063fa9>] dput+0xdc/0xe4 [<c10571a1>] __fput+0xb0/0xcd [<c1054e49>] filp_close+0x48/0x4f [<c1055ee9>] sys_close+0x67/0xa5 [<c10026b6>] sysenter_past_esp+0x5f/0x85 ======================= Code: c9 74 0c f2 ae 74 05 bf 01 00 00 00 4f 89 fa 5f 89 d0 c3 85 c9 57 89 c7 89 d0 74 05 f2 ae 75 01 4f 89 f8 5f c3 89 c1 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 c3 90 90 90 57 83 c9 EIP: [<c10acdda>] strnlen+0x6/0x18 SS:ESP 0068:f380be44 Also, remove broken usage of ->deleted from reiserfs: if sget() succeeds, module is already pinned and remove_proc_entry() can't happen => nobody can mark PDE deleted. Dummy proc root in netns code is not marked with refcount 1. AFAICS, we never get it, it's just for proper /proc/net removal. I double checked CLONE_NETNS continues to work. Patch survives many hours of modprobe/rmmod/cat loops without new bugs which can be attributed to refcounting. Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Jan Kara authored
Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by:
Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Nick Piggin authored
Writing to XIP files at a non-page-aligned offset results in data corruption because the writes were always sent to the start of the page. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Ben Gardner authored
The AMD CS5535/CS5536 GPIO has two alternate output modes: AUX-1 and AUX-2. When either AUX is enabled, the cs5535_gpio driver cannot control the output. Some BIOS code for the Geode processor enables AUX-1 for GPIO-1, which configures it as the PC BEEP output. This patch will disable AUX-1 and AUX-2 when the user enables output. Signed-of-by:
Ben Gardner <gardner.ben@gmail.com> Cc: Richard Knutsson <ricknu-0@student.ltu.se> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Pavel Emelyanov authored
register_sysctl_table() can return NULL sometimes, e.g. when kmalloc() returns NULL or when sysctl check fails. I've also noticed, that many (most?) code in the kernel doesn't check for the return value from register_sysctl_table() and later simply calls the unregister_sysctl_table() with potentially NULL argument. This is unlikely on a common kernel configuration, but in case we're dealing with modules and/or fault-injection support, there's a slight possibility of an OOPS. Changing all the users to check for return code from the registering does not look like a good solution - there are too many code doing this and failure in sysctl tables registration is not a good reason to abort module loading (in most of the cases). So I think, that we can just have this check in unregister_sysctl_table just to avoid accidental OOPS-es (actually, the unregister_sysctl_table() did exactly this, before the start_unregistering() appeared). Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Bryan Wu authored
- reconfigure SPI baud from speed_hz of each spi transfer - according to spi_transfer.bits_per_word to reprogram register and setup correct SPI operation handlers Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Bryan Wu authored
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time - move this static things to the blackfin board file - add pin_req array to struct bfin5xx_spi_master - tested on BF537/BF548 with SPI flash Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Sonic Zhang authored
Set correct baud for spi mmc and enable SPI only after DMA is started. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Bryan Wu authored
Move cs_chg_udelay handling (specific to this driver) to cs_deactive(), fixing a bug when some SPI LCD driver needs delay after cs_deactive. Fix bug reported by Cameron Barfield <cbarfield@cyberdata.net> https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&_forum_action=ForumMessageBrowse&thread_id=23630&feedback=Message%20replied. Cc: Cameron Barfield <cbarfield@cyberdata.net> Signed-off-by:
-
Bryan Wu authored
Fix bug in u16_cs_chg_reader to read data_len-2 bytes data firstly, then read out the last 2 bytes data Signed-off-by:
-
Bryan Wu authored
Move global SPI regs_base and dma_ch to struct driver_data. Test on BF54x SPI Flash with 2 spi_master devices enabled. Signed-off-by:
-
Sonic Zhang authored
Move spin/waits to more correct locations in bfin SPI driver. Signed-off-by:
-
Sonic Zhang authored
Fix SPI driver to work with SPI flash ST M25P16 on bf548 Currently the SPI driver enables the SPI controller and sets the SPI baud register for each SPI transfer. But they should never be changed within a SPI message session, in which several SPI transfers are pumped. This patch moves SPI setting to the begining of a message session, and never disables SPI controller until an error occurs. Signed-off-by:
-
Sonic Zhang authored
Move pin muxing to setup and cleanup methods. Signed-off-by:
-
Sonic Zhang authored
Use portmux mechanism to support SPI busses 1 and 2, instead of just the original bus 0. Signed-off-by:
-
Bryan Wu authored
Update spi driver to support multi-ports by using platform resources; tested on STAMP537+SPI_MMC, other boards need more testing. Plus other minor updates. Signed-off-by:
-
Mike Frysinger authored
Prevent people from setting bits in ctl_reg that the SPI framework already handles, hopefully we can one day drop ctl_reg completely Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
Bryan Wu authored
Respect per-transfer cs_change field (protocol tweaking support) by adding and using cs_active/cs_deactive functions. Signed-off-by:
-
Bryan Wu authored
Cleanup and error handling - add error handling in SPI bus driver with selecting clients - use proper defines to access Blackfin MMRs - remove useless SSYNCs - cleaner use of portmux calls Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Michael Hennerich authored
Use new Blackfin portmux interface, add error handling. Signed-off-by:
-
Bryan Wu authored
Initial BF54x SPI support - support BF54x SPI0 - clean up some code (whitespace etc) - will support multiports in the future - start using portmux calls Signed-off-by:
-
Marc Pignat authored
Given the patch which simplifies the spi_sync calling convention, this one updates the callers of that routine which tried using it according to the previous specification. (Most didn't.) Signed-off-by:
Marc Pignat <marc.pignat@hevs.ch> Signed-off-by:
-
Marc Pignat authored
Simplify spi_sync calling convention, eliminating the need to check both the return value AND the message->status. In consequence, this corrects misbehaviours of spi_read and spi_write (which only checked the former) and their callers. Signed-off-by:
-
David Brownell authored
Add comment to at25 driver that it's for EEPROM chips, not FLASH chips ... the AT25 series has both types of chip, and sometimes they're even pin-compatible. The command sets are different, as is the treatment of erasure. (FLASH needs explicit erasure, but with EEPROM it's implicit.) Note that all vendors seem to have this same confusion in their *25* series SPI memory parts. Signed-off-by:
-
David Brownell authored
Make spi_write_then_read() use a mutex not a binary semaphore. Signed-off-by:
-
Tetsuo Handa authored
mm/slub.c exports ksize(), but mm/slob.c and mm/slab.c don't. It's used by binfmt_flat, which can be built as a module. Signed-off-by:
-
