- 12 Apr, 2024 2 commits
-
-
Oak Zeng authored
Introduce a helper function xe_userptr_populate_range to populate a userptr range. This functions calls hmm_range_fault to read CPU page tables and populate all pfns/pages of this virtual address range. For system memory page, dma-mapping is performed to get a dma-address which can be used later for GPU to access pages. v1: Address review comments: separate a npage_in_range function (Matt) reparameterize function xe_userptr_populate_range function (Matt) move mmu_interval_read_begin() call into while loop (Thomas) s/mark_range_accessed/xe_mark_range_accessed (Thomas) use set_page_dirty_lock (vs set_page_dirty) (Thomas) move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt) v2: Remove device private page support. Only support system pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas) v3: Address review comments: Squash patch "drm/xe: Introduce a helper to free sg table" to current patch (Matt) start and end addresses are already page aligned (Matt) Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of non system allocator call. (Matt) Drop kthread_use_mm and kthread_unuse_mm. (Matt) No need of kernel-doc for static functions.(Matt) Modify function names. (Matt) Free sgtable incase of dma_map_sgtable failure.(Matt) Modify loop for hmm_range_fault.(Matt) v4: Remove the dummy function for xe_hmm_userptr_populate_range since CONFIG_HMM_MIRROR is needed. (Matt) Change variable names start/end to userptr_start/userptr_end.(Matt) v5: Remove device private page support info from commit message. Since the patch doesn't support device page handling. (Thomas) Signed-off-by:Oak Zeng <oak.zeng@intel.com> Co-developed-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Cc: Brian Welty <brian.welty@intel.com> Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-2-himal.prasad.ghimiray@intel.com
-
Maarten Lankhorst authored
Add a unreference bo in the error path, to prevent leaking a bo ref. Return 0 on success to clarify the success path. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 44e69495 ("drm/xe/display: Implement display support") Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com
-
- 11 Apr, 2024 2 commits
-
-
José Roberto de Souza authored
This will remove devcoredump from file system and free its resources during driver unload. This fix the driver unload after gpu hang happened, otherwise this it would report that Xe KMD is still in use and it would leave the kernel in a state that Xe KMD can't be unload without a reboot. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Acked-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-2-jose.souza@intel.comSigned-off-by:
-
José Roberto de Souza authored
It is useful for modules that do not want to keep coredump available after its unload. Otherwise, the coredump would only be removed after DEVCD_TIMEOUT seconds. v2: - dev_coredump_put() documentation updated (Mukesh) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-1-jose.souza@intel.comSigned-off-by:
-
- 10 Apr, 2024 10 commits
-
-
Nathan Chancellor authored
A recent change added a use of xe_wa_oob.h without adding the file that uses it to uses_generated_oob, which means xe_wa_oob.h does not get properly generated before attempting to build the object file: LINK resolve_btfids CC [M] drivers/gpu/drm/xe/xe_guc_ads.o drivers/gpu/drm/xe/xe_guc_ads.c:10:10: fatal error: generated/xe_wa_oob.h: No such file or directory 10 | #include <generated/xe_wa_oob.h> | ^~~~~~~~~~~~~~~~~~~~~~~ After adding '$(obj)/xe_guc_ads.o' to uses_generated_oob, xe_wa_oob.h is always generated before building the file, resulting in no errors: LINK resolve_btfids HOSTCC drivers/gpu/drm/xe/xe_gen_wa_oob GEN xe_wa_oob.c xe_wa_oob.h CC [M] drivers/gpu/drm/xe/xe_guc_ads.o Fixes: c151ff5c ("drm/xe/lnl: Enable GuC Wa_14019882105") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240410-drm-xe-fix-xe_guc_ads-using-xe_wa_oob-v1-1-441f2d8e5d83@kernel.orgSigned-off-by:
-
Michal Wajdeczko authored
GuC CTB is related to the GT, so best to use xe_gt_assert(). Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
A platform can have more than one GuC, so we should use GT-oriented logs to refer to specific GuC. Signed-off-by:
-
Riana Tauro authored
Lmem init check should be done only after pcode initialization status is complete. Move lmem init check after pcode status check. Also wait for a short while after pcode status check to allow completion of the task. Failing to do so, can lead to aborting the module load leaving the system unusable. Wait until the lmem initialization is complete within a timeout (60s) or till the user aborts. v2: use bool as return type re-order the code comment (Rodrigo) add comment for deferring probe (Himal) v3: rebase Signed-off-by:Riana Tauro <riana.tauro@intel.com> Acked-by:
-
Riana Tauro authored
The root tile indicates the pcode initialization is complete when all tiles have completed their initialization. So the mailbox can be polled only on the root tile. Check pcode init status only on root tile and move it to device probe early as root tile is initialized there. Also make similar changes in resume paths. v2: add lock/unlocked version of pcode_mailbox_rw to allow pcode init to be called in device early probe (Rodrigo) v3: add code description about using root tile change function names to xe_pcode_probe_early and xe_pcode_init (Rodrigo) Signed-off-by: -
Michal Wajdeczko authored
As SR-IOV support varies between platforms and the driver can run in different SR-IOV modes, add debugfs file with these details. Signed-off-by:
-
Michal Wajdeczko authored
SR-IOV PF mode detection is based on PCI capability as reported by the PCI dev_is_pf() function and additionally on 'max_vfs' module parameter which could be also used to disable PF capability even if SR-IOV PF capability is reported by the hardware. Signed-off-by:
-
Michal Wajdeczko authored
We want to have an option to limit the number of the VFs that the PF driver will be able to manage. With this limit set to zero we will also have a way to completely disable the PF functionality. Since we currently don't support SR-IOV on any platform, we start with this limit set to zero by default. Signed-off-by:
-
Michal Wajdeczko authored
We may leave pat.ops unset when running on brand new platform or when running as a VF. While the former is unlikely, the latter is valid (future) use case and will cause NPD when someone will try to dump PAT settings by debugfs. It's better to check pointer to pat.ops instead of specific .dump hook, as we have this hook always defined for every .ops variant. Signed-off-by:
Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409105106.1067-2-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
Make sure that pat.ops (if selected) has all required function pointers setup. Only .program_media may be omitted if we have older media version. This should help avoid late runtime checks against individual function pointers. Signed-off-by:
-
- 09 Apr, 2024 16 commits
-
-
Gustavo Sousa authored
Define the initial set of workarounds for Xe2_HPM. Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Shekhar Chauhan authored
Introduces performance tuning guide changes for Xe_HPG. v2: Switched to open upper bound for "Tuning: L3 Cache" setting. BSpec: 72161 Signed-off-by:
Shekhar Chauhan <shekhar.chauhan@intel.com> Signed-off-by:
-
Haridhar Kalvala authored
Add the initial set of Xe2_HPG gt/engine/lrc workarounds. v2: Removed WA_16020183090 which is no more applicable Extended WA_18033852989,18034896535 also to xe2hpg Signed-off-by:Haridhar Kalvala <haridhar.kalvala@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Dnyaneshar Bhadane <dnyaneshwar.bhadane@intel.com> Signed-off-by:
-
Bommu Krishnaiah authored
Add 18034896535 as driver permanent workaround. v2: 18034896535 and 16021540221 are two independent workarounds that just happen to have the same implementation, hence keeping it. Signed-off-by:
Bommu Krishnaiah <krishnaiah.bommu@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Akshata Jahagirdar authored
On Xe2 dGPU, compression is only supported with VRAM. When copying from VRAM -> system memory the KMD uses mapping with uncompressed PAT so the copy in system memory is guaranteed to be uncompressed. When restoring such buffers from system memory -> VRAM the KMD can't easily know which pages were originally compressed, so we always use uncompressed -> uncompressed here. so this means that there's no need for extra CCS storage on such platforms. v2: More description added to commit message Signed-off-by:
Akshata Jahagirdar <akshata.jahagirdar@intel.com> Signed-off-by:
-
Himal Prasad Ghimiray authored
on Xe2 dgfx platform determine the offset using Flat CCS size bitfield of XE2_FLAT_CCS_BASE_RANGE_[UPPER/LOWER] mcr registers. v2: function argument tile_size changed from pass by reference to pass by value Bspec: 68023 Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Matt Roper authored
Discrete Xe2 platforms require programming of one additional row of PAT settings which controls the access characteristics for PPGTT and LMTT page tables. Integrated GPUs do not need this programming and will leave the register at its hardware default value. Bspec: 71582 Signed-off-by:
-
Balasubramani Vivekanandan authored
BMG uses the same MOCS table as LNL. Bpsec: 71582 CC: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
BMG is a discrete GPU based on the Xe2 architecture. No device ids are bound to the BMG platform descriptor yet. BMG device ids will be added once we have all the basic required platform enabling patches landed. v2: Removed device ids, deferring it to a later patch v3: Squash in compat header IS_BATTLEMAGE() patch. (Lucas) Bspec: 68090 Signed-off-by:
-
Matt Roper authored
Xe2_HPM uses the same general feature flags as Xe2_LPM. Xe2_HPM is identified as version 13.01 in the GMD_ID register. Bspec: 68090, 67163 Signed-off-by:
-
Matt Roper authored
Xe2_HPG uses the same general feature flags as Xe2_LPG. Xe2_HPG is identified as version 20.01 in the GMD_ID register. Bspec: 68090 Signed-off-by:
-
Karthik Poosa authored
Address potential overflow in result of left shift of a lower precision (u32) operand before assignment to higher precision (u64) variable. v2: - Update commit message. (Himal) Fixes: 4446fcf2 ("drm/xe/hwmon: Expose power1_max_interval") Signed-off-by:
Karthik Poosa <karthik.poosa@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-5-karthik.poosa@intel.comSigned-off-by:
-
Karthik Poosa authored
Return struct xe_reg instead of reg.raw from xe_hwmon_get_reg to have abstracted usage of struct xe_reg. v2: - Use xe_reg_is_valid function instead of XE_REG_IS_VALID macro as it is removed. Signed-off-by:
-
Karthik Poosa authored
Add a function to check if struct xe_reg has valid address. v2: - Rebase. - Make xe_reg_is_valid as inline function instead of a macro. (Badal). - Update commit msg. Signed-off-by:
Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-2-karthik.poosa@intel.comSigned-off-by:
-
Badal Nilawar authored
Enable GuC Wa_14019882105 to block interrupts during C6 flow when the memory path has been blocked v2: Make helper function generic and name it as guc_waklv_enable_simple (John Harrison) v3: Make warning descriptive (John Harrison) v4: s/drm_WARN/xe_gt_WARN/ (Michal) Cc: John Harrison <john.harrison@intel.com> Signed-off-by:John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Badal Nilawar authored
To prevent running out of bits, new workaround (w/a) enable flags are being added via a KLV system instead of a 32 bit flags word. v2: GuC version check > 70.10 is not needed as base line xe doesnot support anything below < 70.19 v3: Use 64 bit ggtt address for future compatibility (John Harrison/Daniele) v4: %s/PAGE_SIZE/SZ_4K/ (Michal) Cc: John Harrison <John.C.Harrison@intel.com> Signed-off-by:
-
- 08 Apr, 2024 10 commits
-
-
Matthew Brost authored
It is useful capture the GuC CT snapshot if the GuC CT has been forcefully put into the stopped state. Enable snapshot capture when in this state. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Matthew Brost authored
Always capture exec queues on snapshot regardless if exec queue has pending jobs or not. Having jobs or not does indicate whether the exec queue capture is useful. Example bugs that would not be easily detected by skipping capture when pending job list is empty: - Jobs pending on exec queue have dependencies - Leaking exec queue refs - GuC protocol issues (i.e. losing G2H) In addition to above bugs, in general it just useful to see every exec queue registered with the GuC and its state. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Francois Dugast authored
The commit 84a1ed5e ("drm/xe/uapi: Remove unused flags") is partially reverted. At the time, flags not used by user space were removed during cleanup. Some flags now needed by the compute runtime are brought back in this commit: - DRM_XE_VM_BIND_FLAG_READONLY is used to write protect kernel ISA thus preventing accidental overwrites. - DRM_XE_VM_BIND_FLAG_IMMEDIATE is used to trigger mapping at the time of binding in order to prevent faulting at execution time. The changes in the compute runtime are ready and approved, see link below. v2: Include a link to the PR in the commit message (Matthew Brost) v3: Update kernel doc and improve commit message (Lucas De Marchi) Cc: Mateusz Jablonski <mateusz.jablonski@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://github.com/intel/compute-runtime/pull/717Signed-off-by:
Francois Dugast <francois.dugast@intel.com> Reviewed-by:
-
Lucas De Marchi authored
xe_gt_clock_cycles_to_ns() is not called from anywhere after PMU handling was removed in commit 90a8b23f ("drm/xe/pmu: Remove PMU from Xe till uapi is finalized"). Drop it. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408151312.2100304-1-lucas.demarchi@intel.comSigned-off-by:
-
Ashutosh Dixit authored
RING_CONTEXT_CONTROL is a masked register. v2: Also clean up setting register value (Lucas) Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404161256.3852502-1-ashutosh.dixit@intel.com
-
José Roberto de Souza authored
This messages is printed a lot and from my understanding it do not bring any value, so here dropping it. Signed-off-by:
-
Lucas De Marchi authored
All of these mutexes are already initialized by the display side since commit 3fef3e6f ("drm/i915: move display mutex inits to display code"), so the xe shouldn´t initialize them. Fixes: 44e69495 ("drm/xe/display: Implement display support") Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
On current platforms supported firmwares, like GuC and HuC, must be loaded by the PF driver. Mark those firmwares as 'preloaded' so we will skip fetching and loading them on the VF drivers but still correctly report them as 'running'. Signed-off-by:
-
Michal Wajdeczko authored
Legacy SOFT_SCRATCH registers are not accessible from the VF. Any G2H notification posted there will be handled by the PF driver. Signed-off-by:
-
Michal Wajdeczko authored
VFs drivers don't have access to MOCS registers. It is a PF driver responsibility to program MOCS according to the HW team guidelines. Signed-off-by:
-
