- 08 Jan, 2015 12 commits
-
-
Dan Carpenter authored
commit c1c6156f upstream. This function isn't right and it causes a static checker warning: drivers/md/dm-thin.c:3016 maybe_resize_data_dev() error: potentially using uninitialized 'sb_data_size'. It should set "*count" and return zero on success the same as the sm_metadata_get_nr_blocks() function does earlier. Fixes: 3241b1d3 ('dm: add persistent data library') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
commit 445559cd upstream. When dm-bufio sets out to use the bio built into a struct dm_buffer to issue an IO, it needs to call bio_reset after it's done with the bio so that we can free things attached to the bio such as the integrity payload. Therefore, inject our own endio callback to take care of the bio_reset after calling submit_io's end_io callback. Test case: 1. modprobe scsi_debug delay=0 dif=1 dix=199 ato=1 dev_size_mb=300 2. Set up a dm-bufio client, e.g. dm-verity, on the scsi_debug device 3. Repeatedly read metadata and watch kmalloc-192 leak! Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Peng Tao authored
commit 4bd5a980 upstream. nfs4_layoutget_release() drops layout hdr refcnt. Grab the refcnt early so that it is safe to call .release in case nfs4_alloc_pages fails. Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Fixes: a47970ff ("NFSv4.1: Hold reference to layout hdr in layoutget") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
commit 170c2387 upstream. Corrected wait_event() call which was waiting for wrong completion status (0xFF). Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Baruch Siach authored
commit 0031a98a upstream. Make force_ro consistent with other sysfs entries. Fixes: 371a689f ('mmc: MMC boot partitions support') Cc: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit 1a5fb99d upstream. Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
NeilBrown authored
commit 4b5060dd upstream. If two threads call bitmap_unplug at the same time, then one might schedule all the writes, and the other might decide that it doesn't need to wait. But really it does. It rarely hurts to wait when it isn't absolutely necessary, and the current code doesn't really focus on 'absolutely necessary' anyway. So just wait always. This can potentially lead to data corruption if a crash happens at an awkward time and data was written before the bitmap was updated. It is very unlikely, but this should go to -stable just to be safe. Appropriate for any -stable. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Andy Lutomirski authored
commit 29fa6825 upstream. paravirt_enabled has the following effects: - Disables the F00F bug workaround warning. There is no F00F bug workaround any more because Linux's standard IDT handling already works around the F00F bug, but the warning still exists. This is only cosmetic, and, in any event, there is no such thing as KVM on a CPU with the F00F bug. - Disables 32-bit APM BIOS detection. On a KVM paravirt system, there should be no APM BIOS anyway. - Disables tboot. I think that the tboot code should check the CPUID hypervisor bit directly if it matters. - paravirt_enabled disables espfix32. espfix32 should *not* be disabled under KVM paravirt. The last point is the purpose of this patch. It fixes a leak of the high 16 bits of the kernel stack address on 32-bit KVM paravirt guests. Fixes CVE-2014-8134. Suggested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit f647d7c1 upstream. Otherwise, if buggy user code points DS or ES into the TLS array, they would be corrupted after a context switch. This also significantly improves the comments and documents some gotchas in the code. Before this patch, the both tests below failed. With this patch, the es test passes, although the gsbase test still fails. ----- begin es test ----- /* * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned short GDT3(int idx) { return (idx << 3) | 3; } static int create_tls(int idx, unsigned int base) { struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; if (syscall(SYS_set_thread_area, &desc) != 0) err(1, "set_thread_area"); return desc.entry_number; } int main() { int idx = create_tls(-1, 0); printf("Allocated GDT index %d\n", idx); unsigned short orig_es; asm volatile ("mov %%es,%0" : "=rm" (orig_es)); int errors = 0; int total = 1000; for (int i = 0; i < total; i++) { asm volatile ("mov %0,%%es" : : "rm" (GDT3(idx))); usleep(100); unsigned short es; asm volatile ("mov %%es,%0" : "=rm" (es)); asm volatile ("mov %0,%%es" : : "rm" (orig_es)); if (es != GDT3(idx)) { if (errors == 0) printf("[FAIL]\tES changed from 0x%hx to 0x%hx\n", GDT3(idx), es); errors++; } } if (errors) { printf("[FAIL]\tES was corrupted %d/%d times\n", errors, total); return 1; } else { printf("[OK]\tES was preserved\n"); return 0; } } ----- end es test ----- ----- begin gsbase test ----- /* * gsbase.c, a gsbase test * Copyright (c) 2014 Andy Lutomirski * GPL v2 */ static unsigned char *testptr, *testptr2; static unsigned char read_gs_testvals(void) { unsigned char ret; asm volatile ("movb %%gs:%1, %0" : "=r" (ret) : "m" (*testptr)); return ret; } int main() { int errors = 0; testptr = mmap((void *)0x200000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr == MAP_FAILED) err(1, "mmap"); testptr2 = mmap((void *)0x300000000UL, 1, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0); if (testptr2 == MAP_FAILED) err(1, "mmap"); *testptr = 0; *testptr2 = 1; if (syscall(SYS_arch_prctl, ARCH_SET_GS, (unsigned long)testptr2 - (unsigned long)testptr) != 0) err(1, "ARCH_SET_GS"); usleep(100); if (read_gs_testvals() == 1) { printf("[OK]\tARCH_SET_GS worked\n"); } else { printf("[FAIL]\tARCH_SET_GS failed\n"); errors++; } asm volatile ("mov %0,%%gs" : : "r" (0)); if (read_gs_testvals() == 0) { printf("[OK]\tWriting 0 to gs worked\n"); } else { printf("[FAIL]\tWriting 0 to gs failed\n"); errors++; } usleep(100); if (read_gs_testvals() == 0) { printf("[OK]\tgsbase is still zero\n"); } else { printf("[FAIL]\tgsbase was corrupted\n"); errors++; } return errors == 0 ? 0 : 1; } ----- end gsbase test ----- Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 0e58af4e upstream. Users have no business installing custom code segments into the GDT, and segments that are not present but are otherwise valid are a historical source of interesting attacks. For completeness, block attempts to set the L bit. (Prior to this patch, the L bit would have been silently dropped.) This is an ABI break. I've checked glibc, musl, and Wine, and none of them look like they'll have any trouble. Note to stable maintainers: this is a hardening patch that fixes no known bugs. Given the possibility of ABI issues, this probably shouldn't be backported quickly. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Andy Lutomirski authored
commit 41bdc785 upstream. Installing a 16-bit RW data segment into the GDT defeats espfix. AFAICT this will not affect glibc, Wine, or dosemu at all. Signed-off-by:
-
Jan Kara authored
commit f54e18f1 upstream. Rock Ridge extensions define so called Continuation Entries (CE) which define where is further space with Rock Ridge data. Corrupted isofs image can contain arbitrarily long chain of these, including a one containing loop and thus causing kernel to end in an infinite loop when traversing these entries. Limit the traversal to 32 entries which should be more than enough space to store all the Rock Ridge data. Reported-by:
P J P <ppandit@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 16 Dec, 2014 25 commits
-
-
Greg Kroah-Hartman authored
-
Takashi Iwai authored
commit 66139a48 upstream. In snd_usbmidi_error_timer(), the driver tries to resubmit MIDI input URBs to reactivate the MIDI stream, but this causes the error when some of URBs are still pending like: WARNING: CPU: 0 PID: 0 at ../drivers/usb/core/urb.c:339 usb_submit_urb+0x5f/0x70() URB ef705c40 submitted while active CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.6-2-desktop #1 Hardware name: FOXCONN TPS01/TPS01, BIOS 080015 03/23/2010 c0984bfa f4009ed4 c078deaf f4009ee4 c024c884 c09a135c f4009f00 00000000 c0984bfa 00000153 c061ac4f c061ac4f 00000009 00000001 ef705c40 e854d1c0 f4009eec c024c8d3 00000009 f4009ee4 c09a135c f4009f00 f4009f04 c061ac4f Call Trace: [<c0205df6>] try_stack_unwind+0x156/0x170 [<c020482a>] dump_trace+0x5a/0x1b0 [<c0205e56>] show_trace_log_lvl+0x46/0x50 [<c02049d1>] show_stack_log_lvl+0x51/0xe0 [<c0205eb7>] show_stack+0x27/0x50 [<c078deaf>] dump_stack+0x45/0x65 [<c024c884>] warn_slowpath_common+0x84/0xa0 [<c024c8d3>] warn_slowpath_fmt+0x33/0x40 [<c061ac4f>] usb_submit_urb+0x5f/0x70 [<f7974104>] snd_usbmidi_submit_urb+0x14/0x60 [snd_usbmidi_lib] [<f797483a>] snd_usbmidi_error_timer+0x6a/0xa0 [snd_usbmidi_lib] [<c02570c0>] call_timer_fn+0x30/0x130 [<c0257442>] run_timer_softirq+0x1c2/0x260 [<c0251493>] __do_softirq+0xc3/0x270 [<c0204732>] do_softirq_own_stack+0x22/0x30 [<c025186d>] irq_exit+0x8d/0xa0 [<c0795228>] smp_apic_timer_interrupt+0x38/0x50 [<c0794a3c>] apic_timer_interrupt+0x34/0x3c [<c0673d9e>] cpuidle_enter_state+0x3e/0xd0 [<c028bb8d>] cpu_idle_loop+0x29d/0x3e0 [<c028bd23>] cpu_startup_entry+0x53/0x60 [<c0bfac1e>] start_kernel+0x415/0x41a For avoiding these errors, check the pending URBs and skip resubmitting such ones. Reported-and-tested-by:
Stefan Seyfried <stefan.seyfried@googlemail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Anton Blanchard authored
commit 152d44a8 upstream. I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd ("powerpc: Add VDSO version of getcpu") Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Stephen Boyd authored
commit 336ae118 upstream. There is a small race between when the cycle count is read from the hardware and when the epoch stabilizes. Consider this scenario: CPU0 CPU1 ---- ---- cyc = read_sched_clock() cyc_to_sched_clock() update_sched_clock() ... cd.epoch_cyc = cyc; epoch_cyc = cd.epoch_cyc; ... epoch_ns + cyc_to_ns((cyc - epoch_cyc) The cyc on cpu0 was read before the epoch changed. But we calculate the nanoseconds based on the new epoch by subtracting the new epoch from the old cycle count. Since epoch is most likely larger than the old cycle count we calculate a large number that will be converted to nanoseconds and added to epoch_ns, causing time to jump forward too much. Fix this problem by reading the hardware after the epoch has stabilized. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Todd Fujinaka authored
commit aec653c4 upstream. Call igb_setup_link() when the PHY is powered up. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Reported-by:
Jeff Westfahl <jeff.westfahl@ni.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by:
-
Jan Kara authored
commit df4e7ac0 upstream. ext2_quota_write() doesn't properly setup bh it passes to ext2_get_block() and thus we hit assertion BUG_ON(maxblocks == 0) in ext2_get_blocks() (or we could actually ask for mapping arbitrary number of blocks depending on whatever value was on stack). Fix ext2_quota_write() to properly fill in number of blocks to map. Reviewed-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Nadav Har'El authored
commit bfd0a56b upstream. If we let L1 use EPT, we should probably also support the INVEPT instruction. In our current nested EPT implementation, when L1 changes its EPT table for L2 (i.e., EPT12), L0 modifies the shadow EPT table (EPT02), and in the course of this modification already calls INVEPT. But if last level of shadow page is unsync not all L1's changes to EPT12 are intercepted, which means roots need to be synced when L1 calls INVEPT. Global INVEPT should not be different since roots are synced by kvm_mmu_load() each time EPTP02 changes. Reviewed-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Nadav Har'El <nyh@il.ibm.com> Signed-off-by:
Jun Nakajima <jun.nakajima@intel.com> Signed-off-by:
Xinhao Xu <xinhao.xu@intel.com> Signed-off-by:
Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Vinson Lee <vlee@twopensource.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 9772b54c ] To accomodate for enough headroom for tunnels, use MAX_HEADER instead of LL_MAX_HEADER. Robert reported that he has hit after roughly 40hrs of trinity an skb_under_panic() via SCTP output path (see reference). I couldn't reproduce it from here, but not using MAX_HEADER as elsewhere in other protocols might be one possible cause for this. In any case, it looks like accounting on chunks themself seems to look good as the skb already passed the SCTP output path and did not hit any skb_over_panic(). Given tunneling was enabled in his .config, the headroom would have been expanded by MAX_HEADER in this case. Reported-by:
Robert Święcki <robert@swiecki.net> Reference: https://lkml.org/lkml/2014/12/1/507 Fixes: 594ccc14 ("[SCTP] Replace incorrect use of dev_alloc_skb with alloc_skb in sctp_packet_transmit().") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
willy tarreau authored
[ Upstream commit aebea2ba ] The mvneta driver sets the amount of Tx coalesce packets to 16 by default. Normally that does not cause any trouble since the driver uses a much larger Tx ring size (532 packets). But some sockets might run with very small buffers, much smaller than the equivalent of 16 packets. This is what ping is doing for example, by setting SNDBUF to 324 bytes rounded up to 2kB by the kernel. The problem is that there is no documented method to force a specific packet to emit an interrupt (eg: the last of the ring) nor is it possible to make the NIC emit an interrupt after a given delay. In this case, it causes trouble, because when ping sends packets over its raw socket, the few first packets leave the system, and the first 15 packets will be emitted without an IRQ being generated, so without the skbs being freed. And since the socket's buffer is small, there's no way to reach that amount of packets, and the ping ends up with "send: no buffer available" after sending 6 packets. Running with 3 instances of ping in parallel is enough to hide the problem, because with 6 packets per instance, that's 18 packets total, which is enough to grant a Tx interrupt before all are sent. The original driver in the LSP kernel worked around this design flaw by using a software timer to clean up the Tx descriptors. This timer was slow and caused terrible network performance on some Tx-bound workloads (such as routing) but was enough to make tools like ping work correctly. Instead here, we simply set the packet counts before interrupt to 1. This ensures that each packet sent will produce an interrupt. NAPI takes care of coalescing interrupts since the interrupt is disabled once generated. No measurable performance impact nor CPU usage were observed on small nor large packets, including when saturating the link on Tx, and this fixes tools like ping which rely on too small a send buffer. If one wants to increase this value for certain workloads where it is safe to do so, "ethtool -C $dev tx-frames" will override this default setting. This fix needs to be applied to stable kernels starting with 3.10. Tested-By:
Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit e0ebde0e ] rtnl_link_get_net() holds a reference on the 'struct net', we need to release it in case of error. CC: Eric W. Biederman <ebiederm@xmission.com> Fixes: b51642f6 ("net: Enable a userns root rtnl calls that are safe for unprivilged users") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 2d5c57d7 ] Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit a620a6bc ] If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
Yuri Chislov authored
[ Upstream commit be6572fd ] When using GRE redirection in WCCP, it sets the wrong skb->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Fixes: c12b395a ("gre: Support GRE over IPv6") Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by:
Yuri Chislov <yuri.chislov@gmail.com> Tested-by:
-
Dmitry Torokhov authored
commit aad0b624 upstream. irq_of_parse_and_map() returns 0 on error (the result is unsigned int), so testing for negative result never works. Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 2b21ef0a upstream. Just like 0x1600 which got blacklisted by 66a7cbc3 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by:
Dominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171Signed-off-by:
-
Devin Ryles authored
commit 249cd0a1 upstream. This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by:
Devin Ryles <devin.ryles@intel.com> Signed-off-by:
-
Sakari Ailus authored
commit b31eb901 upstream. Setting a non-settable selection target caused BUG() to be called. The check for valid selections only takes the selection target into account, but does not tell whether it may be set, or only get. Fix the issue by simply returning an error to the user. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Daniel Vetter authored
commit b0616c53 upstream. Otherwise we'll have backtraces in assert_panel_unlocked because the BIOS locks the register. In the reporter's case this regression was introduced in commit c31407a3 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Oct 18 21:07:01 2012 +0100 drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-by:
Alexey Orishko <alexey.orishko@gmail.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francois Tigeot <ftigeot@wolfpond.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Petr Mladek authored
commit f5475cc4 upstream. I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Petr Mladek <pmladek@suse.cz> Tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Grygorii Strashko authored
commit 9ea359f7 upstream. According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a ("i2c: omap: query STP always when NACK is received"). Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by:
Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Alexander Kochetkov authored
commit ccfc8663 upstream. commit 6d9939f6 (i2c: omap: split out [XR]DR and [XR]RDY) changed the way how errata i207 (I2C: RDR Flag May Be Incorrectly Set) get handled. 6d9939f6 code doesn't correspond to workaround provided by errata. According to errata ISR must filter out spurious RDR before data read not after. ISR must read RXSTAT to get number of bytes available to read. Because RDR could be set while there could no data in the receive FIFO. Restored pre 6d9939f6 way of handling errata. Found by code review. Real impact haven't seen. Tested on Beagleboard XM C. Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Fixes: 6d9939f6 i2c: omap: split out [XR]DR and [XR]RDY Tested-by:
Felipe Balbi <balbi@ti.com> Reviewed-by:
-
Alexander Kochetkov authored
commit 27caca9d upstream. commit 1d7afc95 (i2c: omap: ack IRQ in parts) changed the interrupt handler to complete transfers without clearing XRDY (AL case) and ARDY (NACK case) flags. XRDY or ARDY interrupts will be fired again. As a result, ISR keep processing transfer after it was already complete (from the driver code point of view). A didn't see real impacts of the 1d7afc95, but it is really bad idea to have ISR running on user data after transfer was complete. It looks, what 1d7afc95 violate TI specs in what how AL and NACK should be handled (see Note 1, sprugn4r, Figure 17-31 and Figure 17-32). According to specs (if I understood correctly), in case of NACK and AL driver must reset NACK, AL, ARDY, RDR, and RRDY (Master Receive Mode), and NACK, AL, ARDY, and XDR (Master Transmitter Mode). All that is done down the code under the if condition: if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) ... The patch restore pre 1d7afc95 logic of handling NACK and AL interrupts, so no interrupts is fired after ISR informs the rest of driver what transfer complete. Note: instead of removing break under NACK case, we could just replace 'break' with 'continue' and allow NACK transfer to finish using ARDY event. I found that NACK and ARDY bits usually set together. That case confirm TI wiki: http://processors.wiki.ti.com/index.php/I2C_Tips#Detecting_and_handling_NACK In order if someone interested in the event traces for NACK and AL cases, I sent them to mailing list. Tested on Beagleboard XM C. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Seth Forshee authored
commit 8d609725 upstream. These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c3747 ("xen/netfront: handle compound page fragments on transmit") Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Hugh Dickins authored
commit 2022b4d1 upstream. I've been seeing swapoff hangs in recent testing: it's cycling around trying unsuccessfully to find an mm for some remaining pages of swap. I have been exercising swap and page migration more heavily recently, and now notice a long-standing error in copy_one_pte(): it's trying to add dst_mm to swapoff's mmlist when it finds a swap entry, but is doing so even when it's a migration entry or an hwpoison entry. Which wouldn't matter much, except it adds dst_mm next to src_mm, assuming src_mm is already on the mmlist: which may not be so. Then if pages are later swapped out from dst_mm, swapoff won't be able to find where to replace them. There's already a !non_swap_entry() test for stats: move that up before the swap_duplicate() and the addition to mmlist. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Weijie Yang authored
commit fb993fa1 upstream. If a frontswap dup-store failed, it should invalidate the expired page in the backend, or it could trigger some data corruption issue. Such as: 1. use zswap as the frontswap backend with writeback feature 2. store a swap page(version_1) to entry A, success 3. dup-store a newer page(version_2) to the same entry A, fail 4. use __swap_writepage() write version_2 page to swapfile, success 5. zswap do shrink, writeback version_1 page to swapfile 6. version_2 page is overwrited by version_1, data corrupt. This patch fixes this issue by invalidating expired data immediately when meet a dup-store failure. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by:
-
- 06 Dec, 2014 3 commits
-
-
Greg Kroah-Hartman authored
-
Sergio Gelato authored
BugLink: http://bugs.launchpad.net/bugs/1348670 Fix regression introduced in pre-3.14 kernels by cherry-picking aa07c713 (NFSD: Call ->set_acl with a NULL ACL structure if no entries). The affected code was removed in 3.14 by commit 4ac7249e (nfsd: use get_acl and ->set_acl). The ->set_acl methods are already able to cope with a NULL argument. Signed-off-by:
Sergio Gelato <Sergio.Gelato@astro.su.se> [bwh: Rewrite the subject] Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 36074381 upstream. Instead of the arch specific quirk which we are deprecating and that drivers don't understand. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
