- 13 May, 2019 2 commits
-
-
Thomas Bogendoerfer authored
Set dma_masks for SGIWD93 and SGISEEQ otherwise DMA allocations fails and causes not working SCSI/ethernet. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Marcin Nowakowski authored
Appended DTB support is mostly intended to be used on legacy systems, but it is a valid feature that can be enabled for generic platform, which currently doesn't support it - if selected, the appended DTB will be ignored by the platform startup code. During kernel startup, the appended DTB's location is stored in fw_passed_dtb if the init code finds what appears to be a valid DTB. Otherwise (if a0 == -2), a1 is stored in fw_passed_dtb, so either way it will always point to either a user-passed DTB or built-in DTB. Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@fungible.com> Signed-off-by:
-
- 09 May, 2019 4 commits
-
-
Thomas Bogendoerfer authored
Bridge ASIC is widely used in different SGI systems, but the connected chipset is either HUB, HEART or BEDROCK. This commit switches to irq domain hierarchy for hub and bridge interrupts to get bridge setup out of hub interrupt code. Signed-off-by:
-
Thomas Bogendoerfer authored
Converted bridge code to a platform driver using the PCI generic driver framework and use adding platform devices during xtalk scan. This allows easier sharing bridge driver for other SGI platforms like IP30 (Octane) and IP35 (Origin 3k, Fuel, Tezro). Signed-off-by:
-
Paul Cercueil authored
The config0 register in the Xburst CPUs with a processor ID of PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, but they don't actually support this ISA. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Florian Fainelli authored
arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event': arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable] struct perf_event *event = container_of(evt, struct perf_event, hw); ^~~~~ Fix this by making use of IS_ENABLED() to simplify the code and avoid unnecessary ifdefery. Fixes: 84002c88 ("MIPS: perf: Fix perf with MT counting other threads") Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 06 May, 2019 2 commits
-
-
Serge Semin authored
Since memblock-patchset was introduced the reserved-memory nodes are supported being declared in dt-files. So these nodes are actually parsed during the arch setup procedure when the early_init_fdt_scan_reserved_mem() method is called. But due to the arch-specific boot mem_map container utilization we need to manually call the fdt_init_reserved_mem() method after all the available and reserved memory has been moved to memblock. The first function call performed before bootmem_init() by the early_init_fdt_scan_reserved_mem() routine fails due to the lack of any memblock memory regions to allocate from at that stage. Signed-off-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
Serge Semin authored
There are situations when memory regions coming from dts may be too big for the platform physical address space. This especially concerns XPA-capable systems. Bootloader may determine more than 4GB memory available and pass it to the kernel over dts memory node, while kernel is built without XPA/64BIT support. In this case the region may either simply be truncated by add_memory_region() method or by u64->phys_addr_t type casting. But in worst case the method can even drop the memory region if it exceeds PHYS_ADDR_MAX size. So lets make sure the retrieved from dts memory regions are valid, and if some of them aren't, just manually truncate them with a warning printed out. Signed-off-by:
-
- 03 May, 2019 2 commits
-
-
Serge Semin authored
memblock subsystem provides a method to optionally test the passed memory region in case if it was requested via special kernel boot argument. Lets add the function at the bottom of the arch_mem_init() method. Testing at this point in the boot sequence should be safe since all critical areas are now reserved and a minimum of allocations have been done. Reviewed-by:
Matt Redfearn <matt.redfearn@mips.com> Signed-off-by:
-
Serge Semin authored
It is useful to have the whole memblock memory space printed to console when basic memlock initializations are done. It can be performed by ready-to-use method memblock_dump_all(), which prints the available and reserved memory spaces if memblock=debug kernel parameter is specified. Lets call it at the very end of arch_mem_init() function, when all memblock memory and reserved regions are defined, but before any serious allocation is performed. Signed-off-by:
-
- 02 May, 2019 8 commits
-
-
Serge Semin authored
It might be necessary to prevent the virtual mapping creation for a requested memory region. For instance there is a "no-map" property indicating exactly this feature. In this case we need to not only reserve the specified region by pretending it doesn't exist in the memory space, but completely remove the range from system just by removing it from memblock. The same way it's done in default early_init_dt_reserve_memory_arch() method. Signed-off-by:
-
Serge Semin authored
Originally before legacy bootmem was removed, the memory for the range was correctly reserved by reserve_bootmem_region(). But since memblock has been selected for early memory allocation the function can be utilized only after paging is fully initialized (as it is done by memblock_free_all() function). So calling it from arch_mem_init() method is prone to errors, and at this stage we need to reserve the memory in the memblock allocator. Signed-off-by:
-
Serge Semin authored
Really the loop is pointless, since it walks over memblock-reserved memory regions and mark them as reserved in memblock. Before bootmem was removed from the kernel, this loop had been used to map the memory reserved by CMA into the legacy bootmem allocator. But now the early memory allocator is memblock, which is used by CMA for reservation, so we don't need any mapping anymore. Reviewed-by:
-
Serge Semin authored
The reserved_end variable had been used by the bootmem_init() code to find a lowest limit of memory available for memmap blob. The original code just tried to find a free memory space higher than kernel was placed. This limitation seems justified for the memmap ragion search process, but I can't see any obvious reason to reserve the unused space below kernel seeing some platforms place it much higher than standard 1MB. Moreover the RELOCATION config enables it to be loaded at any memory address. So lets reserve the memory occupied by the kernel only, leaving the region below being free for allocations. After doing this we can now discard the code freeing a space between kernel _text and VMLINUX_LOAD_ADDRESS symbols since it's going to be free anyway (unless marked as reserved by platforms). Signed-off-by:
-
Paul Burton authored
Clean up our configuration of the EBase register by making configure_exception_vector() write to it unconditionally on systems implementing MIPSr2 or higher, and removing the duplicate code in per_cpu_trap_init(). The latter would have duplicated work on systems with vectored interrupts, and didn't set BEV for safety like the configure_exception_vector() version of the code does. Signed-off-by:
-
Paul Burton authored
Rather than performing cache flushing for a fixed 0x400 bytes, use the actual size of the vector in order to ensure we cover all emitted code on systems that make use of vectored interrupts. Signed-off-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by:
-
Paul Burton authored
Currently we allocate the exception vector on systems which use a vectored interrupt mode, but otherwise attempt to reuse whatever exception vector the bootloader uses. This can be problematic for a number of reasons: 1) The memory isn't properly marked reserved in the memblock allocator. We've relied on the fact that EBase is generally in the memory below the kernel image which we don't free, but this is about to change. 2) Recent versions of U-Boot place their exception vector high in kseg0, in memory which isn't protected by being lower than the kernel anyway & can end up being clobbered. 3) We are unnecessarily reliant upon there being memory at the address EBase points to upon entry to the kernel. This is often the case, but if the bootloader doesn't configure EBase & leaves it with its default value then we rely upon there being memory at physical address 0 for no good reason. Improve this situation by allocating the exception vector in all cases when running on MIPSr2 or higher, and reserving the memory for MIPSr1 or lower. This ensures we don't clobber the exception vector in any configuration, and for MIPSr2 & higher removes the need for memory at physical address 0. Signed-off-by: -
Paul Burton authored
Allocate the exception vector using memblock_phys_alloc() which gives us a physical address, rather than the previous convoluted setup which obtained a virtual address using memblock_alloc(), converted it to a physical address & then back to a virtual address. Signed-off-by:
-
- 24 Apr, 2019 3 commits
-
-
Serge Semin authored
Before bootmem was completely removed from the kernel, the last loop in the bootmem_init() had been used to reserve the correspondingly marked regions, initialize sparsemem sections and to free the low memory pages, which then would be used for early memory allocations. After the bootmem removing patchset had been merged the loop was left to do the first two things only. But it didn't do them quite well. First of all it leaves the BOOT_MEM_INIT_RAM memory types unreserved, which is definitely bug (although it isn't noticeable due to being used by the kernel region only, which is fully marked as reserved). Secondly the reservation is supposed to be done for any memory including the high one. (I couldn't figure out why the highmem was ignored in the first place, since platforms and dts' may declare any memory region for reservation) Thirdly the reserved_end variable had been used here to not accidentally free memory occupied by kernel. Since we already reserved the corresponding region higher in this method there is no need in using the variable here anymore. Fourthly the sparsemem should be aware of all the memory types in the system including the ROM_DATA even if it is going to be reserved for the whole system uptime. Finally after all these notes are fixed the loop of memory reservation can be freely merged into the memory installation loop as it's done in this patch. Signed-off-by:
-
Serge Semin authored
There is a pointless code left in the bootmem_init() method since the bootmem allocator removal. First part resides the PFN ranges calculation loop. The conditional expressions and continue operator are useless there, since nothing is done after them. Second part is in RAM ranges installation loop. We can simplify the conditions cascade a bit without much of the logic redefinition, so to reduce the code length. In particular the end boundary value can be verified after the possible reduction to be below max_low_pfn. Signed-off-by:
-
Serge Semin authored
Current MIPS platform code makes sure the kernel text, data and init sections are added to the boot memory map pool right after the arch-specific memory setup method has been executed. But for some reason the MIPS platform code skipped the kernel .bss section, which definitely should be in the boot mem pool as well in any case. Lets fix this just be adding the space between __bss_start and __bss_stop. Reviewed-by:
-
- 23 Apr, 2019 1 commit
-
-
Nick Desaulniers authored
Towards the goal of removing cc-ldoption, it seems that --hash-style= was added to binutils 2.17.50.0.2 in 2006. The minimal required version of binutils for the kernel according to Documentation/process/changes.rst is 2.20. --build-id was added in 2.18 according to binutils-gdb/ld/NEWS. Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html Cc: clang-built-linux@googlegroups.com Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
- 12 Apr, 2019 1 commit
-
-
Paul Burton authored
Commit e6046b5e ("MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices") includes a file that doesn't exist, causing build failures... Revert it. References: https://lore.kernel.org/linux-mips/CAJsYDVJvviz8a2oVmb0XL3OB+=Eecu-3kC9T9vsmxpuC_BqDSA@mail.gmail.com/Signed-off-by:
-
- 09 Apr, 2019 4 commits
-
-
Paul Burton authored
Enable CONFIG_JUMP_LABEL for generic configs in order to better optimize at runtime and get better test coverage for our jump label support. Signed-off-by: -
Paul Burton authored
MIPSr6 introduced compact branches which have no delay slots. Make use of them for jump labels in order to avoid the need for a nop to fill the branch or jump delay slot, saving 4 bytes of code for each static branch. Signed-off-by: -
Paul Burton authored
Both arch_static_branch() & arch_static_branch_jump() emit a control transfer instruction (ie. branch or jump) without disabling assembler re-ordering. As such the assembler will automatically fill their delay slots. Both functions follow their branch or jump with an explicit nop that at first appears to be there to fill the delay slot, but given that the assembler will do that the explicit nops serve no purpose & we end up with our branch or jump followed by 2 nops. Remove the redundant nops. Signed-off-by: -
Paul Burton authored
A small batch of MIPS fixes for 5.1: - An interrupt masking fix for Loongson-based Lemote 2F systems (fixing a regression from v3.19). - A relocation fix for configurations in which the devicetree is stored in an ELF section (fixing a regression from v4.7). - Fix jump labels for MIPSr6 kernels where they previously could inadvertently place a control transfer instruction in a forbidden slot & take unexpected exceptions (fixing MIPSr6 support added in v4.0). - Extend an existing USB power workaround for the Netgear WNDR3400 to v2 boards in addition to the v3 ones that already used it. - Remove the custom MIPS32 definition of __kernel_fsid_t to make it consistent with MIPS64 & every other architecture, in particular resolving issues for code which tries to print the val field whose type previously differed (though had identical memory layout). Merged into mips-next to gain the MIPSr6 jump label fix before enabling jump labels by default for generic kernel builds. Signed-off-by:
-
- 04 Apr, 2019 1 commit
-
-
Chuanhong Guo authored
For a long time the mt7621 uses a fixed cpu clock which causes a problem if the cpu frequency is not 880MHz. This patch fixes the cpu clock calculation and adds the cpu/bus clkdev which will be used in dts. Ported from OpenWrt: c7ca224299 ramips: fix cpu clock of mt7621 and add dt clk devices Signed-off-by:
Weijie Gao <hackpascal@gmail.com> Signed-off-by:
Chuanhong Guo <gch981213@gmail.com> Signed-off-by:
-
- 25 Mar, 2019 1 commit
-
-
Paul Burton authored
Emulation of the tlbwr instruction, which writes a TLB entry to a random index in the TLB, currently uses get_random_bytes() to generate a 4 byte random number which we then mask to form the index. This is overkill in a couple of ways: - We don't need 4 bytes here since we mask the value to form a 6 bit number anyway, so we waste /dev/random entropy generating 3 random bytes that are unused. - We don't need crypto-grade randomness here - the architecture spec allows implementations to use any algorithm & merely encourages that some pseudo-randomness be used rather than a simple counter. The fast prandom_u32() function fits that criteria well. So rather than using get_random_bytes() & consuming /dev/random entropy, switch to using the faster prandom_u32_max() which provides what we need here whilst also performing the masking/modulo for us. Signed-off-by:George Spelvin <lkml@sdf.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org
-
- 19 Mar, 2019 5 commits
-
-
Enrico Weigelt, metux IT consult authored
Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by:
Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by:
-
Hassan Naveed authored
Currently MIPS32 supports a JIT for classic BPF only, not extended BPF. This patch adds JIT support for extended BPF on MIPS32, so code is actually JIT'ed instead of being only interpreted. Instructions with 64-bit operands are not supported at this point. We can delete classic BPF because the kernel will translate classic BPF programs into extended BPF and JIT them, eliminating the need for classic BPF. Signed-off-by:
Hassan Naveed <hnaveed@wavecomp.com> Signed-off-by:
-
Hassan Naveed authored
Currently eBPF support is available on MIPS64R2 only. Use MIPS64R6 variants of instructions like multiply, divide, movn, movz so eBPF can run on the newer ISA. Also, we only need to check ISA revision before JIT'ing code, because we know the CPU is running a 64-bit kernel because eBPF JIT is only included in kernels with CONFIG_64BIT=y due to Kconfig dependencies. Signed-off-by:
-
Hassan Naveed authored
Add the following instructions for use by eBPF on mipsr6: insn_ddivu_r6, insn_divu_r6, insn_dmodu, insn_dmulu, insn_modu, insn_mulu, insn_seleqz, insn_selnez Signed-off-by:
-
Valentin Schneider authored
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Note that commit a18815ab ("Use preempt_schedule_irq.") initially removed the existing loop, but missed the final branch to restore_all. Commit cdaed73a ("Fix preemption bug.") missed that and reintroduced the loop. Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Signed-off-by:
-
- 17 Mar, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
