- 28 Jun, 2024 4 commits
-
-
Isaku Yamahata authored
Test if KVM emulates the APIC bus clock at the expected frequency when userspace configures the frequency via KVM_CAP_X86_APIC_BUS_CYCLES_NS. Set APIC timer's initial count to the maximum value and busy wait for 100 msec (largely arbitrary) using the TSC. Read the APIC timer's "current count" to calculate the actual APIC bus clock frequency based on TSC frequency. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Isaku Yamahata <isaku.yamahata@intel.com> Co-developed-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Reinette Chatre authored
Add udelay() for x86 tests to allow busy waiting in the guest for a specific duration, and to match ARM and RISC-V's udelay() in the hopes of eventually making udelay() available on all architectures. Get the guest's TSC frequency using KVM_GET_TSC_KHZ and expose it to all VMs via a new global, guest_tsc_khz. Assert that KVM_GET_TSC_KHZ returns a valid frequency, instead of simply skipping tests, which would require detecting which tests actually need/want udelay(). KVM hasn't returned an error for KVM_GET_TSC_KHZ since commit cc578287 ("KVM: Infrastructure for software and hardware based TSC rate scaling"), which predates KVM selftests by 6+ years (KVM_GET_TSC_KHZ itself predates KVM selftest by 7+ years). Note, if the GUEST_ASSERT() in udelay() somehow fires and the test doesn't check for guest asserts, then the test will fail with a very cryptic message. But fixing that, e.g. by automatically handling guest asserts, is a much larger task, and practically speaking the odds of a test afoul of this wart are infinitesimally small. Signed-off-by:
-
Peng Hao authored
Some variables allocated in kvm_arch_vcpu_ioctl are released when the function exits, so there is no need to set GFP_KERNEL_ACCOUNT. Signed-off-by:
Peng Hao <flyingpeng@tencent.com> Link: https://lore.kernel.org/r/20240624012016.46133-1-flyingpeng@tencent.comSigned-off-by:
-
Jeff Johnson authored
Add module descriptions for the vendor modules to fix allmodconfig 'make W=1' warnings: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kvm/kvm-intel.o WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/kvm/kvm-amd.o Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240622-md-kvm-v2-1-29a60f7c48b1@quicinc.com [sean: split kvm.ko change to separate commit] Signed-off-by:
-
- 11 Jun, 2024 2 commits
-
-
Thomas Prescher authored
When a vCPU is interrupted by a signal while running a nested guest, KVM will exit to userspace with L2 state. However, userspace has no way to know whether it sees L1 or L2 state (besides calling KVM_GET_STATS_FD, which does not have a stable ABI). This causes multiple problems: The simplest one is L2 state corruption when userspace marks the sregs as dirty. See this mailing list thread [1] for a complete discussion. Another problem is that if userspace decides to continue by emulating instructions, it will unknowingly emulate with L2 state as if L1 doesn't exist, which can be considered a weird guest escape. Introduce a new flag, KVM_RUN_X86_GUEST_MODE, in the kvm_run data structure, which is set when the vCPU exited while running a nested guest. Also introduce a new capability, KVM_CAP_X86_GUEST_MODE, to advertise the functionality to userspace. [1] https://lore.kernel.org/kvm/20240416123558.212040-1-julian.stecklina@cyberus-technology.de/T/#m280aadcb2e10ae02c191a7dc4ed4b711a74b1f55Signed-off-by:
Thomas Prescher <thomas.prescher@cyberus-technology.de> Signed-off-by:
Julian Stecklina <julian.stecklina@cyberus-technology.de> Link: https://lore.kernel.org/r/20240508132502.184428-1-julian.stecklina@cyberus-technology.deSigned-off-by:
-
Carlos López authored
Improve the description for the KVM_CAP_X86_BUS_LOCK_EXIT capability to fix a few typos and grammar issues, and to clarify the purpose of the capability. Signed-off-by:
Carlos López <clopez@suse.de> Link: https://lore.kernel.org/r/20240424105616.29596-1-clopez@suse.de [sean: massage changelog] Signed-off-by:
-
- 10 Jun, 2024 10 commits
-
-
Sean Christopherson authored
Move guest_cpuid_is_amd_or_hygon() into cpuid.c now that, except for one Intel quirk in the emulator, KVM checks for AMD vs. Intel *compatible* vCPUs, not exact vendors, i.e. now that there should not be any reason for KVM at-large to care about the exact vendor. Opportunistically refactor the guts of the helper to use "entry" instead of "best", and short circuit the !entry path to make the common case more readable. Link: https://lore.kernel.org/r/20240405235603.1173076-11-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Open code the is_guest_vendor_intel() check in string_registers_quirk() to discourage makiking exact vendor==Intel checks in the emulator, and to remove the rather awful #ifdeffery. The string quirk is literally the only Intel specific, *non-architectural* behavior that KVM emulates. All Intel specific behavior that is architecturally defined applies to all vendors that are compatible with Intel's architecture, i.e. should use guest_cpuid_is_intel_compatible(). Link: https://lore.kernel.org/r/20240405235603.1173076-10-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Emulate SYSENTER in Compatibility Mode for all vCPUs models that are compatible with Intel's architecture, as the behavior if SYSENTER is architecturally defined in Intel's SDM, i.e. should be followed by any CPU that implements Intel's architecture. Link: https://lore.kernel.org/r/20240405235603.1173076-9-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Emulate bits 63:32 of the SYSENTER_R{I,S}P MSRs for all vCPUs that are compatible with Intel's architecture, not just strictly vCPUs that have vendor==Intel. The behavior of bits 63:32 is architecturally defined in the SDM, i.e. not some uarch specific quirk of Intel CPUs. Link: https://lore.kernel.org/r/20240405235603.1173076-8-seanjc@google.comSigned-off-by: -
Sean Christopherson authored
Use guest_cpuid_is_intel_compatible() to determine whether SYSCALL in 32-bit Protected Mode (including Compatibility Mode) should #UD or succeed. The existing code already does the exact equivalent of guest_cpuid_is_intel_compatible(), just in a rather roundabout way. No functional change intended. Link: https://lore.kernel.org/r/20240405235603.1173076-7-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Treat code #DBs as inhibited in MOV/POP-SS shadows for vCPU models that are Intel compatible, not just strictly vCPUs with vendor==Intel. The behavior is explicitly called out in the SDM, and thus architectural, i.e. applies to all CPUs that implement Intel's architecture, and isn't a quirk that is unique to CPUs manufactured by Intel: However, if an instruction breakpoint is placed on an instruction located immediately after a POP SS/MOV SS instruction, the breakpoint will be suppressed as if EFLAGS.RF were 1. Applying the behavior strictly to Intel wasn't intentional, KVM simply didn't have a concept of "Intel compatible" as of commit baf67ca8 ("KVM: x86: Suppress code #DBs on Intel if MOV/POP SS blocking is active"). Link: https://lore.kernel.org/r/20240405235603.1173076-6-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Extend Intel's check on MSR_TSC_AUX[63:32] to all vCPU models that are Intel compatible, i.e. aren't AMD or Hygon in KVM's world, as the behavior is architectural, i.e. applies to any CPU that is compatible with Intel's architecture. Applying the behavior strictly to Intel wasn't intentional, KVM simply didn't have a concept of "Intel compatible" as of commit 61a05d44 ("KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model"). Link: https://lore.kernel.org/r/20240405235603.1173076-5-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Zero out the sampling period for checkpointed events if the host supports HLE or RTM, i.e. supports transactions and thus checkpointed events, not based on whether the vCPU vendor model is Intel. Perf's refusal to allow a sample period for checkpointed events is based purely on whether or not the CPU supports HLE/RTM transactions, i.e. perf has no knowledge of the vCPU vendor model. Note, it is _extremely_ unlikely that the existing code is a problem in real world usage, as there are far, far bigger hurdles that would need to be cleared to support cross-vendor vPMUs. The motivation is mainly to eliminate the use of guest_cpuid_is_intel(), in order to get to a state where KVM pivots on AMD vs. Intel compatibility, i.e. doesn't check for exactly vendor==Intel except in rare circumstances (i.e. for CPU quirks). Cc: Like Xu <like.xu.linux@gmail.com> Link: https://lore.kernel.org/r/20240405235603.1173076-4-seanjc@google.comSigned-off-by:
-
Binbin Wu authored
After commit 0ec3d6d1 "KVM: x86: Fully defer to vendor code to decide how to force immediate exit", vmx_request_immediate_exit() was removed. Commit 5f18c642 "KVM: VMX: Move out vmx_x86_ops to 'main.c' to dispatch VMX and TDX" added its declaration by accident. Remove it. Signed-off-by:
Binbin Wu <binbin.wu@linux.intel.com> Link: https://lore.kernel.org/r/20240506075025.2251131-1-binbin.wu@linux.intel.comSigned-off-by:
-
Hou Wenlong authored
The check_apicv_inhibit_reasons() callback implementation was dropped in the commit b3f257a8 ("KVM: x86: Track required APICv inhibits with variable, not callback"), but the definition removal was missed in the final version patch (it was removed in the v4). Therefore, it should be dropped, and the vmx_check_apicv_inhibit_reasons() function declaration should also be removed. Signed-off-by:
Hou Wenlong <houwenlong.hwl@antgroup.com> Reviewed-by:
Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Link: https://lore.kernel.org/r/54abd1d0ccaba4d532f81df61259b9c0e021fbde.1714977229.git.houwenlong.hwl@antgroup.comSigned-off-by:
-
- 05 Jun, 2024 5 commits
-
-
Alejandro Jimenez authored
Keep kvm_apicv_inhibit enum naming consistent with the current pattern by renaming the reason/enumerator defined as APICV_INHIBIT_REASON_DISABLE to APICV_INHIBIT_REASON_DISABLED. No functional change intended. Suggested-by:
-
Alejandro Jimenez authored
Use the tracing infrastructure helper __print_flags() for printing flag bitfields, to enhance the trace output by displaying a string describing each of the inhibit reasons set. The kvm_apicv_inhibit_changed tracepoint currently shows the raw bitmap value, requiring the user to consult the source file where the inhibit reasons are defined to decode the trace output. Signed-off-by:
Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240506225321.3440701-2-alejandro.j.jimenez@oracle.comCo-developed-by:
-
Isaku Yamahata authored
Add KVM_CAP_X86_APIC_BUS_CYCLES_NS capability to configure the APIC bus clock frequency for APIC timer emulation. Allow KVM_ENABLE_CAPABILITY(KVM_CAP_X86_APIC_BUS_CYCLES_NS) to set the frequency in nanoseconds. When using this capability, the user space VMM should configure CPUID leaf 0x15 to advertise the frequency. Vishal reported that the TDX guest kernel expects a 25MHz APIC bus frequency but ends up getting interrupts at a significantly higher rate. The TDX architecture hard-codes the core crystal clock frequency to 25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture does not allow the VMM to override the value. In addition, per Intel SDM: "The APIC timer frequency will be the processor’s bus clock or core crystal clock frequency (when TSC/core crystal clock ratio is enumerated in CPUID leaf 0x15) divided by the value specified in the divide configuration register." The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded APIC bus frequency of 1GHz. The KVM doesn't enumerate CPUID leaf 0x15 to the guest unless the user space VMM sets it using KVM_SET_CPUID. If the CPUID leaf 0x15 is enumerated, the guest kernel uses it as the APIC bus frequency. If not, the guest kernel measures the frequency based on other known timers like the ACPI timer or the legacy PIT. As reported by Vishal the TDX guest kernel expects a 25MHz timer frequency but gets timer interrupt more frequently due to the 1GHz frequency used by KVM. To ensure that the guest doesn't have a conflicting view of the APIC bus frequency, allow the userspace to tell KVM to use the same frequency that TDX mandates instead of the default 1Ghz. Reported-by:Vishal Annapurve <vannapurve@google.com> Closes: https://lore.kernel.org/lkml/20231006011255.4163884-1-vannapurve@google.comSigned-off-by:
Rick Edgecombe <rick.p.edgecombe@intel.com> Co-developed-by:
Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by:
Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/r/6748a4c12269e756f0c48680da8ccc5367c31ce7.1714081726.git.reinette.chatre@intel.comSigned-off-by:
-
Isaku Yamahata authored
Introduce the VM variable "nanoseconds per APIC bus cycle" in preparation to make the APIC bus frequency configurable. The TDX architecture hard-codes the core crystal clock frequency to 25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture does not allow the VMM to override the value. In addition, per Intel SDM: "The APIC timer frequency will be the processor’s bus clock or core crystal clock frequency (when TSC/core crystal clock ratio is enumerated in CPUID leaf 0x15) divided by the value specified in the divide configuration register." The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded APIC bus frequency of 1GHz. Introduce the VM variable "nanoseconds per APIC bus cycle" to prepare for allowing userspace to tell KVM to use the frequency that TDX mandates instead of the default 1Ghz. Doing so ensures that the guest doesn't have a conflicting view of the APIC bus frequency. Signed-off-by:Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
-
Isaku Yamahata authored
Remove APIC_BUS_FREQUENCY and calculate it based on nanoseconds per APIC bus cycle. APIC_BUS_FREQUENCY is used only for HV_X64_MSR_APIC_FREQUENCY. The MSR is not frequently read, calculate it every time. There are two constants related to the APIC bus frequency: APIC_BUS_FREQUENCY and APIC_BUS_CYCLE_NS. Only one value is required because one can be calculated from the other: APIC_BUS_CYCLES_NS = 1000 * 1000 * 1000 / APIC_BUS_FREQUENCY. Remove APIC_BUS_FREQUENCY and instead calculate it when needed. This prepares for support of configurable APIC bus frequency by requiring to change only a single variable. Suggested-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
- 03 Jun, 2024 4 commits
-
-
Sean Christopherson authored
Move shadow_phys_bits into "struct kvm_host_values", i.e. into KVM's global "kvm_host" variable, so that it is automatically exported for use in vendor modules. Rename the variable/field to maxphyaddr to more clearly capture what value it holds, now that it's used outside of the MMU (and because the "shadow" part is more than a bit misleading as the variable is not at all unique to shadow paging). Recomputing the raw/true host.MAXPHYADDR on every use can be subtly expensive, e.g. it will incur a VM-Exit on the CPUID if KVM is running as a nested hypervisor. Vendor code already has access to the information, e.g. by directly doing CPUID or by invoking kvm_get_shadow_phys_bits(), so there's no tangible benefit to making it MMU-only. Link: https://lore.kernel.org/r/20240423221521.2923759-5-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Snapshot shadow_phys_bits when kvm.ko is loaded, not when a vendor module is loaded, to guard against usage of shadow_phys_bits before it is initialized. The computation isn't vendor specific in any way, i.e. there there is no reason to wait to snapshot the value until a vendor module is loaded, nor is there any reason to recompute the value every time a vendor module is loaded. Opportunistically convert it from "read mostly" to "read-only after init". Link: https://lore.kernel.org/r/20240423221521.2923759-4-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Use KVM's snapshot of the host's XCR0 when stuffing SEV-ES host state instead of reading XCR0 from hardware. XCR0 is only written during boot, i.e. won't change while KVM is running (and KVM at large is hosed if that doesn't hold true). Link: https://lore.kernel.org/r/20240423221521.2923759-3-seanjc@google.comSigned-off-by:
-
Sean Christopherson authored
Add "struct kvm_host_values kvm_host" to hold the various host values that KVM snapshots during initialization. Bundling the host values into a single struct simplifies adding new MSRs and other features with host state/values that KVM cares about, and provides a one-stop shop. E.g. adding a new value requires one line, whereas tracking each value individual often requires three: declaration, definition, and export. No functional change intended. Link: https://lore.kernel.org/r/20240423221521.2923759-2-seanjc@google.comSigned-off-by:
-
- 02 Jun, 2024 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linuxLinus Torvalds authored
Pull ata fixes from Niklas Cassel: - Add a quirk for three different devices that have shown issues with LPM (link power management). These devices appear to not implement LPM properly, since we see command timeouts when enabling LPM. The quirk disables LPM for these problematic devices. (Me) - Do not apply the Intel PCS quirk on Alder Lake. The quirk is not needed and was originally added by mistake when LPM support was enabled for this AHCI controller. Enabling the quirk when not needed causes the the controller to not be able to detect the connected devices on some platforms. * tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340 ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1 ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Miscellaneous topology parsing fixes: - Fix topology parsing regression on older CPUs in the new AMD/Hygon parser - Fix boot crash on odd Intel Quark and similar CPUs that do not fill out cpuinfo_x86::x86_clflush_size and zero out cpuinfo_x86::x86_cache_alignment as a result. Provide 32 bytes as a general fallback value. - Fix topology enumeration on certain rare CPUs where the BIOS locks certain CPUID leaves and the kernel unlocked them late, which broke with the new topology parsing code. Factor out this unlocking logic and move it earlier in the parsing sequence" * tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology/intel: Unlock CPUID before evaluating anything x86/cpu: Provide default cache line size if not enumerated x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Export a symbol to make life easier for instrumentation/debugging" * tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/x86: Export 'percpu arch_freq_scale'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf events fix from Ingo Molnar: "Add missing MODULE_DESCRIPTION() lines" * tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add missing MODULE_DESCRIPTION() lines perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull hardening fixes from Kees Cook: - scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings - mailmap: update entry for Kees Cook - kunit/fortify: Remove __kmalloc_node() test * tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kunit/fortify: Remove __kmalloc_node() test mailmap: update entry for Kees Cook scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Enforce full ordering for ATOMIC operations with BPF_FETCH - Fix uaccess build errors seen with GCC 13/14 - Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT - Drop error message from lparcfg guest name lookup Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao, Puranjay Mohan, and Samuel Holland. * tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64 powerpc/uaccess: Use YZ asm constraint for ld powerpc/uaccess: Fix build errors seen with GCC 13/14 powerpc/pseries/lparcfg: drop error message from guest name lookup powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "After merging a commit 1fffe7a3 ("script: modpost: emit a warning when the description is missing"), MODULE_DESCRIPTOR seems to be mandatory for kernel modules. In FireWire subsystem, the most of practical kernel modules have the field, while KUnit test modules do not. A single patch is applied to fix them" * tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: add missing MODULE_DESCRIPTION() to test modules
-
- 01 Jun, 2024 6 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Two small smb3 fixes: - Fix socket creation with sfu mount option (spotted by test generic/423) - Minor cleanup: fix missing description in two files" * tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix creating sockets when using sfu mount options fs: smb: common: add missing MODULE_DESCRIPTION() macros
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix a Kconfig bug regarding comparisons to 'm' or 'n' - Replace missed $(srctree)/$(src) - Fix unneeded kallsyms step 3 - Remove incorrect "compatible" properties from image nodes in image.fit - Improve gen_kheaders.sh - Fix 'make dt_binding_check' - Clean up unnecessary code * tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: dt-bindings: kbuild: Fix dt_binding_check on unconfigured build kheaders: use `command -v` to test for existence of `cpio` kheaders: explicitly define file modes for archived headers scripts/make_fit: Drop fdt image entry compatible string kbuild: remove a stale comment about cleaning in link-vmlinux.sh kbuild: fix short log for AS in link-vmlinux.sh kbuild: change scripts/mksysmap into sed script kbuild: avoid unneeded kallsyms step 3 kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src) kconfig: remove redundant check in expr_join_or() kconfig: fix comparison to constant symbols, 'm', 'n' kconfig: remove unused expr_is_no()
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Chandan Babu: - Fix a livelock by dropping an xfarray sortinfo folio when an error is encountered - During extended attribute operations, Initialize transaction reservation computation based on attribute operation code - Relax symbolic link's ondisk verification code to allow symbolic links with short remote targets - Prevent soft lockups when unmapping file ranges and also during remapping blocks during a reflink operation - Fix compilation warnings when XFS is built with W=1 option * tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Add cond_resched to block unmap range and reflink remap path xfs: don't open-code u64_to_user_ptr xfs: allow symlinks with short remote targets xfs: fix xfs_init_attr_trans not handling explicit operation codes xfs: drop xfarray sortinfo folio on error xfs: Stop using __maybe_unused in xfs_alloc.c xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fix from Greg KH: "Here is a single revert for a much-reported regression in 6.10-rc1 when it comes to a few older architectures. Turns out that the VT ioctls don't work the same across all cpu types because of some old compatibility requrements for stuff like alpha and powerpc. So revert the change that attempted to have them use the _IO() macros and go back to the known-working values instead. This has NOT been in linux-next but has had many reports that it fixes the issue with 6.10-rc1" * tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "VT: Use macros to define ioctls"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linuxLinus Torvalds authored
Pull landlock fix from Mickaël Salaün: "This fixes a wrong path walk triggered by syzkaller" * tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add layout1.refer_mount_root landlock: Fix d_parent walk
-
Greg Kroah-Hartman authored
This reverts commit 8c467f33. Turns out this breaks many architectures as the vt ioctls do not all match up everywhere due to historical reasons, so the original commit is invalid for many values. Reported-by:
Nick Bowler <nbowler@draconx.ca> Reported-by:
Arnd Bergmann <arnd@kernel.org> Reported-by:
Jiri Slaby <jirislaby@kernel.org> Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Gladkov <legion@kernel.org> Link: https://lore.kernel.org/r/ad4e561c-1d49-4f25-882c-7a36c6b1b5c0@draconx.ca Link: https://lore.kernel.org/r/0da9785e-ba44-4718-9d08-4e96c1ba7ab2@kernel.org Link: https://lore.kernel.org/all/34d848f4-670b-4493-bf21-130ef862521b@xenosoft.de/Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 May, 2024 1 commit
-
-
https://gitlab.freedesktop.org/drm/kernelLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is the weekly fixes. Lots of small fixes across the board, one BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe mostly with small fixes to all the other drivers. shmem: - fix BUG_ON in COW handling - warn when trying to pin imported objects buddy: - fix page size handling dma-buf: - sw-sync: Don't interfere with IRQ handling - fix kthreads-handling error path i915: - fix a race in audio component by registering it later - make DPT object unshrinkable to avoid shrinking when framebuffer has not shrunk - fix CCS id calculation to fix a perf regression - fix selftest caching mode - fix FIELD_PREP compiler warnings - fix indefinite wait for GT wakeref release - revert overeager multi-gt pm reference removal xe: - pcode polling timeout change - fix for deadlocks for faulting VMs - error-path lock imbalance fix amdgpu: - RAS fix - fix colorspace property for MST connectors - fix for PCIe DPM - silence UBSAN warning - GPUVM robustness fix - partition fix - drop deprecated I2C_CLASS_SPD amdkfd: - revert unused changes for certain 11.0.3 devices - simplify APU VRAM handling lima: - fix dma_resv-related deadlock in object pin msm: - remove build-time dependency on Python 3.9 nouveau: - nvif: Fix possible integer overflow panel: - lg-sw43408: Select DP helpers; Declare backlight ops as static - sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel panfrost: - fix dma_resv-related deadlock in object pin" * tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits) drm/msm: remove python 3.9 dependency for compiling msm drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2 drm/amdgpu: Make CPX mode auto default in NPS4 drm/amdkfd: simplify APU VRAM handling Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices" drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent drm/amdgpu: silence UBSAN warning drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth() drm/i915: Fix audio component initialization drm/i915/dpt: Make DPT object unshrinkable drm/i915/gt: Fix CCS id's calculation for CCS mode setting drm/panel/lg-sw43408: mark sw43408_backlight_ops as static drm/i915/selftests: Set always_coherent to false when reading from CPU drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER drm/i915/guc: avoid FIELD_PREP warning drm/i915/gt: Disarm breadcrumbs if engines are already idle Revert "drm/i915: Remove extra multi-gt pm-references" ...
-
