- 08 Jan, 2024 1 commit
-
-
Abdel Alkuor authored
Set tmp112 conversion rate to 8 HZ and 12-bit mode. Fixes: 35cd1804 ("hwmon: (lm75) Aproximate sample times to data-sheet values") Signed-off-by:
Abdel Alkuor <alkuor@gmail.com> Link: https://lore.kernel.org/r/20240106030254.384963-1-alkuor@gmail.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net>
-
- 02 Jan, 2024 16 commits
-
-
Abdel Alkuor authored
as6200 is a temperature sensor with 0.0625°C resolution and a range between -40°C to 125°C. By default, the driver configures as6200 as following: - Converstion rate: 8 Hz - Conversion mode: continuous - Consecutive fault counts: 4 samples - Alert state: high polarity - Alert mode: comparator mode Interrupt is supported for the alert pin. Signed-off-by:
-
Abdel Alkuor authored
as6200 is a temperature sensor with a range between -40°C to 125°C degrees and an accuracy of ±0.4°C degree between 0 and 65°C and ±1°C for the other ranges. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/17ba2dfdb3d25bf1b5b4ed9f858b6e28902bedbe.1703127334.git.alkuor@gmail.comSigned-off-by:
-
Luca Ceresoli authored
Including hwmon-sysfs.h is not needed since sysfs code got removed from this file in commit 08b02433 ("hwmon: (lm75) Convert to use new hwmon registration API"). Signed-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20231228-hwmon-cleanup-include-v1-1-e36f65aee1f0@bootlin.comSigned-off-by:
-
Peter Yin authored
Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase, modulation controller. Signed-off-by:
Peter Yin <peteryin.openbmc@gmail.com> Signed-off-by:
Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com [groeck: Fix checkpatch issues, use i2c_get_match_data()] Signed-off-by:
-
Peter Yin authored
Monolithic Power Systems, Inc. (MPS) MP2856/MP2857 dual-loop, digital, multi-phase controller. Signed-off-by:
-
Aleksa Savic authored
Remove the #ifdef check for CONFIG_DEBUG_FS and the empty variant of aqc_debugfs_init(), because the debugfs functions already do nothing if debugfs isn't enabled. Signed-off-by:
Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20231216140754.336775-1-savicaleksa83@gmail.comSigned-off-by:
-
David Heidelberg authored
Convert fan devices connected to GPIOs to the YAML syntax. Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231209171653.85468-1-david@ixit.czSigned-off-by:
-
Jami Kurki authored
Add support for AMD Family 19h Model 8h CPUs, which appear to be the Zen 3 based AMD Threadripper 5000WX series (Chagall). The patch was tested with an AMD Threadripper 5955WX. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218244Tested-by:
Jami Kurki <bindkeys@gmail.com> Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Signed-off-by:
-
Aleksa Savic authored
This driver exposes hardware sensors of the Gigabyte AORUS Waterforce all-in-one CPU liquid coolers, which communicate through a proprietary USB HID protocol. Report offsets were initially discovered in [1] and confirmed by me on a Waterforce X240 by observing the sent reports from the official software. Available sensors are pump and fan speed in RPM, as well as coolant temperature. Also available through debugfs is the firmware version. Attaching a fan is optional and allows it to be controlled from the device. If it's not connected, the fan-related sensors will report zeroes. The addressable RGB LEDs and LCD screen are not supported in this driver and should be controlled through userspace tools. [1]: https://github.com/liquidctl/liquidctl/issues/167Signed-off-by:
-
Uwe Kleine-König authored
pdev is a bad name for a global variable. Still more as the driver has functions where pdev is a local variable. Rename it to smsc47m1_pdev. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/68a959b56da7f9452557d08c72249182364b0dd0.1701957841.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
Use platform_device_register_full() instead of open coding this function. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent the following section mismatch warning WARNING: modpost: drivers/hwmon/smsc47m1: section mismatch in reference: smsc47m1_driver+0x8 (section: .data) -> smsc47m1_remove (section: .exit.text) that triggers on an allmodconfig W=1 build. Signed-off-by:
-
Serge Semin authored
Add myself as a maintainer of the Baikal-T1 PVT sensors driver. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20231122170506.27267-2-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Stefan Gloor authored
Add information regarding the existing support for sts3x series and update the datasheet links. Signed-off-by:
Stefan Gloor <code@stefan-gloor.ch> Link: https://lore.kernel.org/r/20231204165004.8491-2-code@stefan-gloor.chSigned-off-by:
-
Delphine CC Chiu authored
Add a driver to support ltc4286 chip Signed-off-by:
Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> Link: https://lore.kernel.org/r/20231123015440.199822-3-Delphine_CC_Chiu@Wiwynn.com [groeck: Fixed formatting] Signed-off-by:
-
- 12 Dec, 2023 1 commit
-
-
Delphine CC Chiu authored
Add a device tree bindings for ltc4286 device. Signed-off-by:
-
- 11 Dec, 2023 22 commits
-
-
Daniel Matyas authored
Added custom channel-specific (temp1) attribute for resolution. The wait time for a conversion in one-shot mode (enable = 0) depends on the resolution. When resolution is 12-bit, the conversion time is 140ms, but the minimum update_interval is 125ms. Handled this problem by waiting an additional 15ms (125ms + 15ms = 140ms). Added 'mask' parameter to the shutdown_write() function. Now it can either write or update bits, depending on the value of mask. This is needed, because for alarms a write is necessary, but for resolution only the resolution bits should be updated. Signed-off-by:
Daniel Matyas <daniel.matyas@analog.com> Link: https://lore.kernel.org/r/20231031182158.124608-5-daniel.matyas@analog.comSigned-off-by:
-
Daniel Matyas authored
When user writes a value to update_interval which does not match the possible values, instead of returning invalid error, return the closest value. Signed-off-by:
-
Daniel Matyas authored
Added 'mask' parameter to the shutdown_write() function. Now it can either write or update bits, depending on the value of mask. This is needed, because for alarms a write is necessary, but for resolution only the resolution bits should be updated. Signed-off-by:
-
Daniel Matyas authored
Created of_match_table and id_table entries for max31828 and max31829. When adi,flt-q and/or adi,alrm-pol are not mentioned, the default configuration is loaded based on the type of the chip. Signed-off-by:
-
Daniel Matyas authored
Used fwnode to retrieve data from the devicetree in the init_client function. If the uint32 properties are not present, the default values are used for max31827 chip. Signed-off-by:
-
Marius Zachmann authored
Replaces the integer 0 with NULL. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100455.k6m2eO4N-lkp@intel.com/Signed-off-by:
Marius Zachmann <mail@mariuszachmann.de> Link: https://lore.kernel.org/r/20231210220357.77036-1-mail@mariuszachmann.deSigned-off-by:
-
Michal Simek authored
The Analog Monitoring System (AMS) defines 51 channels (Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml) that's why increase number to 51. Signed-off-by:
Michal Simek <michal.simek@amd.com> Acked-by:
-
Armin Wolf authored
A user reported that on this machine, disabling BIOS fan control is necessary in order to change the fan speed. Tested-by: <serverror@serverror.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
Armin Wolf authored
Document the WMI SMM interface so that future developers can better understand how it works. Signed-off-by:
-
Armin Wolf authored
Some Dell machines like the Dell Optiplex 7000 do not support the legacy SMM interface, but instead expect all SMM calls to be issued over a special WMI interface. Add support for this interface so users can control the fans on those machines. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
In the future, multiple SMM calling backends will exist, with each backend being required to initialize its data. Introduce a helper function for this so the code necessary to initialize dell_smm_data is not duplicated between different backends. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Currently, i8k_dmi_table contains both entries used for DMI matching and entries used to override config options. This does not allow for differentiating between "its safe to issue raw SMM calls on this machine" and "its not safe to issue raw SMM calls on this machine, but here are some config values". Since future SMM backends will need to differentiate between those two cases, move those config entries into a separate table. i8k_dmi_table now serves as a general "its safe to issue raw SMM calls" table. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Future SMM calling backends will not be able to probe during module init, meaning the DMI tables holding config data would have to drop their __initconst attribute. Prevent this by moving the config handling to module init. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Future SMM calling backends will not be able to probe during module init, meaning the DMI tables used for whitelisting features would have to drop their __initconst attribute. Prevent this by moving the whitelist handling to module init. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Future SMM calling backends will not be able to probe during module init, meaning the DMI tables used for backlisting broken features would have to drop their __initconst attribute. Prevent this by moving the blacklist handling to module init. Tested-by: <serverror@serverror.com> Reviewed-by:
-
Armin Wolf authored
Modern Dell machines support multiple ways to issue an SMM call. Prepare support for those by introducing dell_smm_ops, which is used by dell_smm_call() to perform a SMM call. Each SMM backend needs to provide a dell_smm_ops structure. Tested-by: <serverror@serverror.com> Reviewed-by:
-
James Seo authored
The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is evidently a valid way of representing a WMI data item as far as the Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from loading. This seems quite rare, but add support for such strings. Treating this as a quirk pretty much means adding that support anyway. Also clean up an oversight in update_numeric_sensor_from_wobj() in which the result of hp_wmi_strdup() was being used without error checking. Reported-by:
Lukasz Stelmach <l.stelmach@samsung.com> Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/Tested-by:
James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.techSigned-off-by:
-
Andy Shevchenko authored
MILLI and MICRO may be used in the driver to make code more robust against possible miscalculations. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231128180654.395692-4-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Andy Shevchenko authored
The driver uses math.h and not util_macros.h. All the same for the kernel.h, replace it with what the driver is using. Signed-off-by:
-
Patrick Rudolph authored
The PECI CPU sensors are available as soon as the CPU is powered, however the PECI DIMM sensors are available after DRAM has been trained and thresholds have been written by host firmware. The default timeout of 30 seconds isn't enough for modern multisocket platforms utilizing DDR5 memory to bring up the memory and enable PECI sensor data. Bump the default timeout to 10 minutes in case the system starts without cached DDR5 training data. Signed-off-by:
Patrick Rudolph <patrick.rudolph@9elements.com> Link: https://lore.kernel.org/r/20231130090422.2535542-1-patrick.rudolph@9elements.com [groeck: List affected driver in patch subject] Signed-off-by:
-
Kees Cook authored
Without visibility into the initializers for data->innr, GCC suspects using it as an index could walk off the end of the various 14-element arrays in data. Perform an explicit clamp to the array size. Silences the following warning with GCC 12+: ../drivers/hwmon/pc87360.c: In function 'pc87360_update_device': ../drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 341 | data->in_max[i] = pc87360_read_value(data, | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ 342 | LD_IN, i, | ~~~~~~~~~ 343 | PC87365_REG_IN_MAX); | ~~~~~~~~~~~~~~~~~~~ ../drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14 209 | u8 in_max[14]; /* Register value */ | ^~~~~~ Cc: Jim Cromie <jim.cromie@gmail.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by:Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231130200207.work.679-kees@kernel.org [groeck: Added comment into code clarifying context] Signed-off-by:
-
