- 19 Oct, 2023 1 commit
-
-
Jacek Lawrynowicz authored
Avoid HW bug on some platforms where we enter D0i3 state and CPU is in low power states (C8 or above). Fixes: 852be13f ("accel/ivpu: Add PM support") Cc: stable@vger.kernel.org Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by:
-
- 18 Oct, 2023 2 commits
-
-
Luben Tuikov authored
Eliminate DRM_SCHED_PRIORITY_UNSET, value of -2, whose only user was amdgpu. Furthermore, eliminate an index bug, in that when amdgpu boots, it calls drm_sched_entity_init() with DRM_SCHED_PRIORITY_UNSET, which uses it to index sched->sched_rq[]. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Acked-by:
Alex Deucher <Alexander.Deucher@amd.com> Link: https://lore.kernel.org/r/20231017035656.8211-2-luben.tuikov@amd.com
-
Luben Tuikov authored
A context priority value of AMD_CTX_PRIORITY_UNSET is now invalid--instead of carrying it around and passing it to the Direct Rendering Manager--and it becomes AMD_CTX_PRIORITY_NORMAL in amdgpu_ctx_ioctl(), the gateway to context creation. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 16 Oct, 2023 2 commits
-
-
Hamza Mahfooz authored
The BenQ GW2765 reports that it supports higher (> 8) bpc modes, but when trying to set them we end up with a black screen. So, limit it to 8 bpc modes. Cc: stable@vger.kernel.org # 6.5+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2610Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012184927.133137-1-hamza.mahfooz@amd.com
-
Karolina Stolarek authored
With the current cleanup flow, we could trigger a NULL pointer dereference if there is a delayed destruction of a BO with a system resource that gets executed on drain_workqueue() call, as we attempt to free a resource using an already released resource manager. Remove the device from the device list and drain its workqueue before releasing the system domain manager in ttm_device_fini(). Signed-off-by:
Karolina Stolarek <karolina.stolarek@intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.comSigned-off-by:
-
- 12 Oct, 2023 6 commits
-
-
Karol Herbst authored
Just special case DP DSM connectors until we properly figure out how to deal with this. This resolves user regressions on GPUs with such connectors without reverting the original fix. Cc: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org # 6.4+ Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/255 Fixes: 2b5d1c29 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts") Signed-off-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231011114134.861818-1-kherbst@redhat.com
-
Randy Dunlap authored
kernel-doc emits a warning: include/uapi/drm/nouveau_drm.h:49: warning: Cannot understand * @NOUVEAU_GETPARAM_EXEC_PUSH_MAX on line 49 - I thought it was a doc line We don't have a way to document a macro value via kernel-doc, so change the "/**" kernel-doc marker to a C comment and format the comment more like a kernel-doc comment for consistency. Fixes: d59e75ee ("drm/nouveau: exec: report max pushs through getparam") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Reviewed-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231008140231.17921-1-rdunlap@infradead.org
-
Douglas Anderson authored
In commit 5f04e7ce ("drm/panel-edp: Split eDP panels out of panel-simple") I moved a pile of panels out of panel-simple driver into the newly created panel-edp driver. One of those panels, however, shouldn't have been moved. As is clear from commit e35e305e ("drm/panel: simple: Add AUO B116XW03 panel support"), AUX B116XW03 is an LVDS panel. It's used in exynos5250-snow and exynos5420-peach-pit where it's clear that the panel is hooked up with LVDS. Furthermore, searching for datasheets I found one that makes it clear that this panel is LVDS. As far as I can tell, I got confused because in commit 88d3457c ("drm/panel: auo,b116xw03: fix flash backlight when power on") Jitao Shi added "DRM_MODE_CONNECTOR_eDP". That seems wrong. Looking at the downstream ChromeOS trees, it seems like some Mediatek boards are using a panel that they call "auo,b116xw03" that's an eDP panel. The best I can guess is that they actually have a different panel that has similar timing. If so then the proper panel should be used or they should switch to the generic "edp-panel" compatible. When moving this back to panel-edp, I wasn't sure what to use for .bus_flags and .bus_format and whether to add the extra "enable" delay from commit 88d3457c ("drm/panel: auo,b116xw03: fix flash backlight when power on"). I've added formats/flags/delays based on my (inexpert) analysis of the datasheet. These are untested. NOTE: if/when this is backported to stable, we might run into some trouble. Specifically, before 474c1628 ("arm64: dts: mt8183: jacuzzi: Move panel under aux-bus") this panel was used by "mt8183-kukui-jacuzzi", which assumed it was an eDP panel. I don't know what to suggest for that other than someone making up a bogus panel for jacuzzi that's just for the stable channel. Fixes: 88d3457c ("drm/panel: auo,b116xw03: fix flash backlight when power on") Fixes: 5f04e7ce ("drm/panel-edp: Split eDP panels out of panel-simple") Tested-by:
Anton Bambura <jenneron@postmarketos.org> Acked-by:
Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230925150010.1.Iff672233861bcc4cf25a7ad0a81308adc3bda8a4@changeid
-
Stephen Boyd authored
The kernel produces a warning splat and the DSI device fails to register in this driver if the i2c driver probes, populates child auxiliary devices, and then somewhere in ti_sn_bridge_probe() a function call returns -EPROBE_DEFER. When the auxiliary driver probe defers, the dsi device created by devm_mipi_dsi_device_register_full() is left registered because the devm managed device used to manage the lifetime of the DSI device is the parent i2c device, not the auxiliary device that is being probed. Associate the DSI device created and managed by this driver to the lifetime of the auxiliary device, not the i2c device, so that the DSI device is removed when the auxiliary driver unbinds. Similarly change the device pointer used for dev_err_probe() so the deferred probe errors are associated with the auxiliary device instead of the parent i2c device so we can narrow down future problems faster. Cc: Douglas Anderson <dianders@chromium.org> Cc: Maxime Ripard <maxime@cerno.tech> Fixes: c3b75d47 ("drm/bridge: sn65dsi86: Register and attach our DSI device at probe") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
Joey Gouly authored
The `res` variable is already a `struct resource *`, don't take the address of it. Fixes incorrect output: simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [??? 0xffff4be88a387d00-0xfffffefffde0a240 flags 0x0]: -16 To be correct: simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [mem 0x9e20dc000-0x9e307bfff flags 0x200]: -16 Signed-off-by:
Joey Gouly <joey.gouly@arm.com> Fixes: 9a10c7e6 ("drm/simpledrm: Add support for system memory framebuffers") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <treding@nvidia.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.3+ Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
If the shared memory object is larger than the DRM object that it backs, we can overrun the page array. Limit the number of pages we install from each folio to prevent this. Signed-off-by:
"Matthew Wilcox (Oracle)" <willy@infradead.org> Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231005135648.2317298-1-willy@infradead.org
-
- 10 Oct, 2023 2 commits
-
-
Simon Ser authored
The driver might pull connectors which weren't submitted by user-space into the atomic state. For instance, intel_dp_mst_atomic_master_trans_check() pulls in connectors sharing the same DP-MST stream. However, if the connector is unregistered, this later fails with: [ 559.425658] i915 0000:00:02.0: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:378:DP-7] is not registered Skip the unregistered connector check to allow user-space to turn off connectors one-by-one. See this wlroots issue: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3407 Previous discussion: https://lore.kernel.org/intel-gfx/Y6GX7z17WmDSKwta@ideak-desk.fi.intel.com/Signed-off-by:Simon Ser <contact@emersion.fr> Cc: stable@vger.kernel.org Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ruihai Zhou authored
The sta_himax83102 panel sometimes shows abnormally flickering horizontal lines. The front gate output will precharge the X point of the next pole circuit before TP(TouchPanel Enable) term starts, and wait until the end of the TP term to resume the CLK. For this reason, the X point must be maintained during the TP term. In abnormal case, we measured a slight leakage at point X. This because during the TP term, the GPW does not fully pull the VGL low, causing the TFT to not be closed tightly. To fix this, we completely pull GPW to VGL before entering the TP term. This will ensure that the TFT is closed tightly and prevent the abnormal display. Fixes: 1bc2ef06 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by:
Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by:
-
- 09 Oct, 2023 2 commits
-
-
Zack Rusin authored
Surfaces can be backed (i.e. stored in) memory objects (mob's) which are created and managed by the userspace as GEM buffers. Surfaces grab only a ttm reference which means that the gem object can be deleted underneath us, especially in cases where prime buffer export is used. Make sure that all userspace surfaces which are backed by gem objects hold a gem reference to make sure they're not deleted before vmw surfaces are done with them, which fixes: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 2632 at lib/refcount.c:28 refcount_warn_saturate+0xfb/0x150 Modules linked in: overlay vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock snd_ens1371 snd_ac97_codec ac97_bus snd_pcm gameport> CPU: 2 PID: 2632 Comm: vmw_ref_count Not tainted 6.5.0-rc2-vmwgfx #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:refcount_warn_saturate+0xfb/0x150 Code: eb 9e 0f b6 1d 8b 5b a6 01 80 fb 01 0f 87 ba e4 80 00 83 e3 01 75 89 48 c7 c7 c0 3c f9 a3 c6 05 6f 5b a6 01 01 e8 15 81 98 ff <0f> 0b e9 6f ff ff ff 0f b> RSP: 0018:ffffbdc34344bba0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: ffff960475ea1548 RSI: 0000000000000001 RDI: ffff960475ea1540 RBP: ffffbdc34344bba8 R08: 0000000000000003 R09: 65646e75203a745f R10: ffffffffa5b32b20 R11: 72657466612d6573 R12: ffff96037d6a6400 R13: ffff9603484805b0 R14: 000000000000000b R15: ffff9603bed06060 FS: 00007f5fd8520c40(0000) GS:ffff960475e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5fda755000 CR3: 000000010d012005 CR4: 00000000003706e0 Call Trace: <TASK> ? show_regs+0x6e/0x80 ? refcount_warn_saturate+0xfb/0x150 ? __warn+0x91/0x150 ? refcount_warn_saturate+0xfb/0x150 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xfb/0x150 drm_gem_object_handle_put_unlocked+0xba/0x110 [drm] drm_gem_object_release_handle+0x6e/0x80 [drm] drm_gem_handle_delete+0x6a/0xc0 [drm] ? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx] vmw_bo_unref_ioctl+0x33/0x40 [vmwgfx] drm_ioctl_kernel+0xbc/0x160 [drm] drm_ioctl+0x2d2/0x580 [drm] ? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx] ? do_vmi_munmap+0xee/0x180 vmw_generic_ioctl+0xbd/0x180 [vmwgfx] vmw_unlocked_ioctl+0x19/0x20 [vmwgfx] __x64_sys_ioctl+0x99/0xd0 do_syscall_64+0x5d/0x90 ? syscall_exit_to_user_mode+0x2a/0x50 ? do_syscall_64+0x6d/0x90 ? handle_mm_fault+0x16e/0x2f0 ? exit_to_user_mode_prepare+0x34/0x170 ? irqentry_exit_to_user_mode+0xd/0x20 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x8e/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f5fda51aaff Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 7> RSP: 002b:00007ffd536a4d30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd536a4de0 RCX: 00007f5fda51aaff RDX: 00007ffd536a4de0 RSI: 0000000040086442 RDI: 0000000000000003 RBP: 0000000040086442 R08: 000055fa603ada50 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffd536a51b8 R13: 0000000000000003 R14: 000055fa5ebb4c80 R15: 00007f5fda90f040 </TASK> ---[ end trace 0000000000000000 ]--- A lot of the analyis on the bug was done by Murray McAllister and Ian Forbes. Reported-by:
Murray McAllister <murray.mcallister@gmail.com> Cc: Ian Forbes <iforbes@vmware.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Fixes: a950b989 ("drm/vmwgfx: Do not drop the reference to the handle too soon") Cc: <stable@vger.kernel.org> # v6.2+ Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230928041355.737635-1-zack@kde.org
-
Konstantin Meskhidze authored
Since size of 'header' pointer and '*header' structure is equal on 64-bit machines issue probably didn't cause any wrong behavior. But anyway, fixing typo is required. Fixes: 7a73ba74 ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.") Co-developed-by:
Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com> Signed-off-by:
Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Reviewed-by:
-
- 05 Oct, 2023 1 commit
-
-
Christian König authored
When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by:
Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by:
-
- 03 Oct, 2023 4 commits
-
-
Danilo Krummrich authored
Report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM. While the maximum number of IBs per ring might vary between chipsets, the kernel will make sure that userspace can only push a fraction of the maximum number of IBs per ring per job, such that we avoid a situation where there's only a single job occupying the ring, which could potentially lead to the ring run dry. Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that all channels of a given device have the same ring size. Reviewed-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by:
-
Danilo Krummrich authored
Use channel class definitions instead of magic numbers. Reviewed-by:
-
Danilo Krummrich authored
Use actual struct nvif_mclass instead of identical anonymous struct. Reviewed-by:
-
Kai Uwe Broulik authored
The One Mix 2S is a mini laptop with a 1200x1920 portrait screen mounted in a landscape oriented clamshell case. Because of the too generic DMI strings this entry is also doing bios-date matching. Signed-off-by:
Kai Uwe Broulik <foss-linux@broulik.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231001114710.336172-1-foss-linux@broulik.de
-
- 30 Sep, 2023 1 commit
-
-
Arthur Grillo authored
The kunit_action_platform_driver_unregister is added with &fake_platform_driver as ctx, but the kunit_release_action is called pdev as ctx. Fix that by replacing it with &fake_platform_driver. Fixes: 4f2b0b58 ("drm/tests: helpers: Switch to kunit actions") Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Acked-by:
-
- 27 Sep, 2023 6 commits
-
-
Karol Wachowski authored
Create buffers with cache coherency on the CPU side (write-back) while disabling snooping on the VPU side. These buffers require an explicit cache flush after each CPU-side modification. Configuring pages as write-combined may introduce significant delays, potentially taking hundreds of milliseconds for 64 MB buffers. Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the VPU side. Allocate FW runtime memory buffer (64 MB) as cached with snooping-disabled. This fixes random long FW loading times and boot params memory corruption on warmboot (due to missed wmb). Fixes: 02d5b0aa ("accel/ivpu: Implement firmware parsing and booting") Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Karol Wachowski authored
Move sequence of masking and unmasking global interrupts from buttress interrupt handler to generic one that handles both VPUIP and BTRS interrupts. Unmasking global interrupts will re-trigger MSI for any pending interrupts. Lack of this sequence can randomly cause to miss any VPUIP interrupt that comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing all active interrupt sources. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
Karol Wachowski authored
Do not enable frequency change interrupt on 40xx as it might lead to an interrupt storm in current design. FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause KMD to check VPU interrupt sources by reading VPUIP registers. Access to those registers will toggle necessary clocks and trigger another FREQ_CHANGE interrupt possibly ending in an infinite loop. FREQ_CHANGE interrupt has only debug purposes and can be permanently disabled. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
Karol Wachowski authored
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set after configuring the workpoint. This step ensures that the VPU microcontroller clock is actively toggling and ready for operation. Previously, we relied solely on the READY bit in the VPU_STATUS register, which indicated the completion of the workpoint download. However, this approach was insufficient, as the READY bit could be set while the device was still running on a sideband clock until the PLL locked. To guarantee that the PLL is locked and the device is running on the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before proceeding with the remainder of the power-up sequence. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
Jacek Lawrynowicz authored
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute the dmesg. Signed-off-by:
-
Stanislaw Gruszka authored
If we receive signal when waiting for IPC message response in ivpu_ipc_receive() we return error and continue to operate. Then the driver can send another IPC messages and re-use occupied slot of the message still processed by the firmware. This can result in corrupting firmware memory and following FW crash with messages: [ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512 [ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512 [ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware [ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware [ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512 [ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0 To fix the issue don't use interruptible variant of wait event to allow firmware to finish IPC processing. Fixes: 5d7422cf ("accel/ivpu: Add IPC driver and JSM messages") Reviewed-by:
-
- 25 Sep, 2023 1 commit
-
-
Stanislaw Gruszka authored
Enable VPU on Arrow Lake CPUs. Reviewed-by:
Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by:
-
- 21 Sep, 2023 1 commit
-
-
Thomas Zimmermann authored
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The linker's error message suggests that this config setting has already been broken for other symbols. All errors (new ones prefixed by >>): sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe': sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc' sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var' sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer' sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove': sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer' sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release' >> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read' >> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit' Suggested-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
-
- 20 Sep, 2023 3 commits
-
-
José Pekkarinen authored
The removed line prevents the following cleanup function to execute a dma_fence_put on the out_fence to free its memory, producing the following output in kmemleak: unreferenced object 0xffff888126d8ee00 (size 128): comm "kwin_wayland", pid 981, jiffies 4295380296 (age 390.060s) hex dump (first 32 bytes): c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............ 30 1a e1 2e a6 00 00 00 28 fc 5b 17 81 88 ff ff 0.......(.[..... backtrace: [<0000000011655661>] kmalloc_trace+0x26/0xa0 [<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu] [<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu] [<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm] [<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm] [<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100 [<0000000011fa801e>] do_syscall_64+0x5b/0xc0 [<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 unreferenced object 0xffff888121930500 (size 128): comm "kwin_wayland", pid 981, jiffies 4295380313 (age 390.096s) hex dump (first 32 bytes): c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............ f9 ec d7 2f a6 00 00 00 28 fc 5b 17 81 88 ff ff .../....(.[..... backtrace: [<0000000011655661>] kmalloc_trace+0x26/0xa0 [<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu] [<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu] [<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm] [<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm] [<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100 [<0000000011fa801e>] do_syscall_64+0x5b/0xc0 [<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [...] This memleak will grow quickly, being possible to see the following line in dmesg after few minutes of life in the virtual machine: [ 706.217388] kmemleak: 10731 new suspected memory leaks (see /sys/kernel/debug/kmemleak) The patch will remove the line to allow the cleanup function do its job. Signed-off-by:José Pekkarinen <jose.pekkarinen@foxhound.fi> Fixes: e4812ab8 ("drm/virtio: Refactor and optimize job submission code path") Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230912060824.5210-1-jose.pekkarinen@foxhound.fi
-
Jani Nikula authored
The EDID returned by drm_bridge_get_edid() needs to be freed. Fixes: 0af5e0b4 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org # v5.17+ Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Karol Wachowski authored
Buttress spec requires that the interrupt status is cleared at the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT), that implies that we have to mask out the global interrupt while handling buttress interrupts. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
- 19 Sep, 2023 4 commits
-
-
Dan Carpenter authored
The u_memcpya() function is supposed to return error pointers on error. Returning NULL will lead to an Oops. Fixes: e3885f71 ("nouveau/u_memcpya: use vmemdup_user") Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Dave Airlie authored
I think there are limit checks in place for most things but the new uAPI wants to not have them. Add a limit check and use the vmemdup_user helper instead. Signed-off-by:
-
Danilo Krummrich authored
Always stop and re-start the scheduler in order to let the scheduler free up the timedout job in case it got signaled. In case of exec jobs the job type specific callback will take care to signal all fences and tear down the channel. Fixes: b88baab8 ("drm/nouveau: implement new VM_BIND uAPI") Signed-off-by:
-
Danilo Krummrich authored
Fix the following warning. drivers/gpu/drm/nouveau/nouveau_fence.c:210:45: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected struct nouveau_channel *chan @@ got struct nouveau_channel [noderef] __rcu *channel We're just about to emit the fence, there is nothing to protect against yet, hence it is safe to just cast __rcu away. Reported-by:
-
- 18 Sep, 2023 1 commit
-
-
Arnd Bergmann authored
As a result of the recent Kconfig reworks, the default settings for the framebuffer interfaces changed in unexpected ways: Configurations that leave CONFIG_FB disabled but use DRM now get DRM_FBDEV_EMULATION by default. This also turns on the deprecated /dev/fb device nodes for machines that don't actually want it. In turn, configurations that previously had DRM_FBDEV_EMULATION enabled now only get the /dev/fb front-end but not the more useful framebuffer console, which is not selected any more. We had previously decided that any combination of the three frontends (FB_DEVICE, FRAMEBUFFER_CONSOLE and LOGO) should be selectable, but the new default settings mean that a lot of defconfig files would have to get adapted. Change the defaults back to what they were in Linux 6.5: - Leave DRM_FBDEV_EMULATION turned off unless CONFIG_FB is enabled. Previously this was a hard dependency but now the two are independent. However, configurations that enable CONFIG_FB probably also want to keep the emulation for DRM, while those without FB presumably did that intentionally in the past. - Leave FB_DEVICE turned off for FB=n. Following the same logic, the deprecated option should not automatically get enabled here, most users that had FB turned off in the past do not want it, even if they want the console - Turn the FRAMEBUFFER_CONSOLE option on if DRM_FBDEV_EMULATION is set to avoid having to change defconfig files that relied on it being selected unconditionally in the past. This also makes sense since both LOGO and FB_DEVICE are now disabled by default for builds without CONFIG_FB, but DRM_FBDEV_EMULATION would make no sense if all three are disabled. Fixes: a5ae331e ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION") Fixes: 701d2054 ("fbdev: Make support for userspace interfaces configurable") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
- 15 Sep, 2023 1 commit
-
-
Janusz Krzysztofik authored
While drm_mm test was converted form igt selftest to kunit, unexpected value of "end" argument equal "start" was introduced to one of calls to a function that executes the drm_test_mm_insert_range for specific start/end pair of arguments. As a consequence, DRM_MM_BUG_ON(end <= start) is triggered. Fix it by restoring the original value. Fixes: fc8d29e2 ("drm: selftest: convert drm_mm selftest to KUnit") Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: "Maíra Canal" <mairacanal@riseup.net> Cc: Arthur Grillo <arthurgrillo@riseup.net> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: stable@vger.kernel.org # v6.1+ Reviewed-by:
-
- 14 Sep, 2023 2 commits
-
-
Thomas Hellström authored
when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x78/0x120 [kunit] [55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552080] kthread+0x2e7/0x3c0 [55272.552085] ret_from_fork+0x2d/0x70 [55272.552089] ret_from_fork_asm+0x1b/0x30 [55272.552096] The buggy address belongs to the object at ffff888127502800 which belongs to the cache kmalloc-512 of size 512 [55272.552105] The buggy address is located 40 bytes inside of freed 512-byte region [ffff888127502800, ffff888127502a00) [55272.552115] The buggy address belongs to the physical page: [55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500 [55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) [55272.552141] page_type: 0xffffffff() [55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001 [55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [55272.552157] page dumped because: kasan: bad access detected [55272.552163] Memory state around the buggy address: [55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552184] ^ [55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552198] ================================================================== [55272.552203] Disabling lock debugging due to kernel taint v2: - Update commit message, add Fixes: tag and Cc stable. v3: - Further commit message updates (Maxime Ripard). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v6.3+ Fixes: d9878031 ("drm/tests: helpers: Allow to pass a custom drm_driver") Signed-off-by:Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Francois Dugast <francois.dugast@intel.com> Acked-by:
-
Maíra Canal authored
This reverts commit a0e6a017. Unlocking a mutex in the context of a hrtimer callback is violating mutex locking rules, as mutex_unlock() from interrupt context is not permitted. Link: https://lore.kernel.org/dri-devel/ZQLAc%2FFwkv%2FGiVoK@phenom.ffwll.local/T/#tAcked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
