- 19 Oct, 2018 40 commits
-
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 0f02cfbc upstream. When a system suffers from dcache aliasing a user program may observe stale VDSO data from an aliased cache line. Notably this can break the expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name suggests, monotonic. In order to ensure that users observe updates to the VDSO data page as intended, align the user mappings of the VDSO data page such that their cache colouring matches that of the virtual address range which the kernel will use to update the data page - typically its unmapped address within kseg0. This ensures that we don't introduce aliasing cache lines for the VDSO data page, and therefore that userland will observe updates without requiring cache invalidation. Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Reported-by:
Rene Nielsen <rene.nielsen@microsemi.com> Reported-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Patchwork: https://patchwork.linux-mips.org/patch/20344/Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
David Rivshin authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit d733f754 upstream. If an emac node has a phy-handle property that points to something which is not a phy, then a segmentation fault will occur when the interface is brought up. This is because while phy_connect() will return ERR_PTR() on failure, of_phy_connect() will return NULL. The common error check uses IS_ERR(), and so missed when of_phy_connect() fails. The NULL pointer is then dereferenced. Also, the common error message referenced slave->data->phy_id, which would be empty in the case of phy-handle. Instead, use the name of the device_node as a useful identifier. And in the phy_id case add the error code for completeness. Fixes: 9e42f715 ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by:
David Rivshin <drivshin@allworx.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [SZ Lin (林上智): Tweak the patch to use original print function of dev_info()] Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit b40b3e93 upstream. We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable@vger.kernel.org> Fixes: 582ab27a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 5dfdd24e upstream. Similarly to a recently reported bug in io_ti, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Douglas Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 1cf86bc2 ] If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff302 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit cd0e0ca6 ] The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca0 ("drm/panel: add S6E8AA0 driver") Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountainSigned-off-by:
-
John Stultz authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 1416270f ] In the past we've warned when ADJ_OFFSET was in progress, usually caused by ntpd or some other time adjusting daemon running in non steady sate, which can cause the skew calculations to be incorrect. Thus, this patch checks to see if the clock was being adjusted when we fail so that we don't cause false negatives. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Suggested-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Timo Wischer authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit ff2d6acd ] Without this commit the following intervals [x y), (x y) were be replaced to (y-1 y) by snd_interval_refine_last(). This was also done if y-1 is part of the previous interval. With this changes it will be replaced with [y-1 y) in case of y-1 is part of the previous interval. A similar behavior will be used for snd_interval_refine_first(). This commit adapts the changes for alsa-lib of commit 9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if also excluded before") Signed-off-by:
Timo Wischer <twischer@de.adit-jv.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zhouyang Jia authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 7874b919 ] When devm_ioremap fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling devm_ioremap. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by:
-
Wei Lu authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit e47cb828 ] Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process. This fixes kernel oopses when a child process calls KFD ioctls with a file descriptor inherited from the parent process. Signed-off-by:
Wei Lu <wei.lu2@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit b23ec599 ] Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Robin Murphy authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit ccff2dfa ] Probing the TPIU driver under UBSan triggers an out-of-bounds shift warning in coresight_timeout(): ... [ 5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16 [ 5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int' ... On closer inspection things are exponentially out of whack because we're passing a bitmask where a bit number should be. Amusingly, it seems that both calls will find their expected values by sheer luck and appear to succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2 (TCPresent) which apparently is usually tied high. Following the examples of other drivers, define separate FOO and FOO_BIT macros for masks vs. indices, and put things right. CC: Robert Walker <robert.walker@arm.com> CC: Mike Leach <mike.leach@linaro.org> CC: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 11595db8 ("coresight: Fix disabling of CoreSight TPIU") Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit fe470f5f ] If we fail to find the input / output port for a LINK component while enabling a path, we should fail gracefully rather than assuming port "0". Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Julia Lawall authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit faa1a473 ] Return an error code on failure. Change leading spaces to tab on the first if. Problem found using Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Thierry Reding authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit b59fb482 ] Depending on the kernel configuration, early ARM architecture setup code may have attached the GPU to a DMA/IOMMU mapping that transparently uses the IOMMU to back the DMA API. Tegra requires special handling for IOMMU backed buffers (a special bit in the GPU's MMU page tables indicates the memory path to take: via the SMMU or directly to the memory controller). Transparently backing DMA memory with an IOMMU prevents Nouveau from properly handling such memory accesses and causes memory access faults. As a side-note: buffers other than those allocated in instance memory don't need to be physically contiguous from the GPU's perspective since the GPU can map them into contiguous buffers using its own MMU. Mapping these buffers through the IOMMU is unnecessary and will even lead to performance degradation because of the additional translation. One exception to this are compressible buffers which need large pages. In order to enable these large pages, multiple small pages will have to be combined into one large (I/O virtually contiguous) mapping via the IOMMU. However, that is a topic outside the scope of this fix and isn't currently supported. An implementation will want to explicitly create these large pages in the Nouveau driver, so detaching from a DMA/IOMMU mapping would still be required. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Nicolas Chauvet <kwizart@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 81646a3d ] of_find_compatible_node() returns a device node with refcount incremented and thus needs an explicit of_node_put(). Further relying on an unchecked of_iomap() which can return NULL is problematic here, after all ctrl_base is critical enough for hix5hd2_set_cpu() to call BUG() if not available so a check seems mandated here. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> 0002 Fixes: commit 06cc5c1d ("ARM: hisi: enable hix5hd2 SoC") Signed-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 9f30b5ae ] of_iomap() can return NULL which seems critical here and thus should be explicitly flagged so that the cause of system halting can be understood. As of_find_compatible_node() is returning a device node with refcount incremented it must be explicitly decremented here. Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit d396cb18 ] Relying on an unchecked of_iomap() which can return NULL is problematic here, an explicit check seems mandatory. Also the call to of_find_compatible_node() returns a device node with refcount incremented therefor an explicit of_node_put() is needed here. Signed-off-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit cd87668d ] The PCI_OHCI_INT_REG case in pci_ohci_read_reg() contains the following if statement: if ((lo & 0x00000f00) == CS5536_USB_INTR) CS5536_USB_INTR expands to the constant 11, which gives us the following condition which can never evaluate true: if ((lo & 0xf00) == 11) At least when using GCC 8.1.0 this falls foul of the tautoligcal-compare warning, and since the code is built with the -Werror flag the build fails. Fix this by shifting lo right by 8 bits in order to match the corresponding PCI_OHCI_INT_REG case in pci_ohci_write_reg(). Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 6c6bc9ea ] The first checks in mtdchar_read() and mtdchar_write() attempt to limit `count` such that `*ppos + count <= mtd->size`. However, they ignore the possibility of `*ppos > mtd->size`, allowing the calculation of `count` to wrap around. `mtdchar_lseek()` prevents seeking beyond mtd->size, but the pread/pwrite syscalls bypass this. I haven't found any codepath on which this actually causes dangerous behavior, but it seems like a sensible change anyway. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Ronny Chevalier authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit baa2a4fd ] audit_add_watch stores locally krule->watch without taking a reference on watch. Then, it calls audit_add_to_parent, and uses the watch stored locally. Unfortunately, it is possible that audit_add_to_parent updates krule->watch. When it happens, it also drops a reference of watch which could free the watch. How to reproduce (with KASAN enabled): auditctl -w /etc/passwd -F success=0 -k test_passwd auditctl -w /etc/passwd -F success=1 -k test_passwd2 The second call to auditctl triggers the use-after-free, because audit_to_parent updates krule->watch to use a previous existing watch and drops the reference to the newly created watch. To fix the issue, we grab a reference of watch and we release it at the end of the function. Signed-off-by:
Ronny Chevalier <ronny.chevalier@hp.com> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 2f819db5 ] The regset API documented in <linux/regset.h> defines -ENODEV as the result of the `->active' handler to be used where the feature requested is not available on the hardware found. However code handling core file note generation in `fill_thread_core_info' interpretes any non-zero result from the `->active' handler as the regset requested being active. Consequently processing continues (and hopefully gracefully fails later on) rather than being abandoned right away for the regset requested. Fix the problem then by making the code proceed only if a positive result is returned from the `->active' handler. Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 56446f21 upstream. The problem is that "entryptr + next_offset" and "entryptr + len + size" can wrap. I ended up changing the type of "entryptr" because it makes the math easier when we don't have to do so much casting. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 8ad8aa35 upstream. The "old_entry + le32_to_cpu(pDirInfo->NextEntryOffset)" can wrap around so I have added a check for integer overflow. Reported-by:
Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 6e22e3af upstream. wdm_in_callback() is a completion handler function for the USB driver. So it should not sleep. But it calls service_outstanding_interrupt(), which calls usb_submit_urb() with GFP_KERNEL. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 7e10f14e upstream. If the written data starts with a digit, yurex_write() tries to parse it as an integer using simple_strtoull(). This requires a null- terminator, and currently there's no guarantee that there is one. (The sample program at https://github.com/NeoCat/YUREX-driver-for-Linux/blob/master/sample/yurex_clock.pl writes an integer without a null terminator. It seems like it must have worked by chance!) Always add a null byte after the written data. Enlarge the buffer to allow for this. Cc: stable@vger.kernel.org Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit bc8acc21 upstream. async_complete() in uss720.c is a completion handler function for the USB driver. So it should not sleep, but it is can sleep according to the function call paths (from bottom to top) in Linux-4.16. [FUNC] set_1284_register(GFP_KERNEL) drivers/usb/misc/uss720.c, 372: set_1284_register in parport_uss720_frob_control drivers/parport/ieee1284.c, 560: [FUNC_PTR]parport_uss720_frob_control in parport_ieee1284_ack_data_avail drivers/parport/ieee1284.c, 577: parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt ./include/linux/parport.h, 474: parport_ieee1284_interrupt in parport_generic_irq drivers/usb/misc/uss720.c, 116: parport_generic_irq in async_complete [FUNC] get_1284_register(GFP_KERNEL) drivers/usb/misc/uss720.c, 382: get_1284_register in parport_uss720_read_status drivers/parport/ieee1284.c, 555: [FUNC_PTR]parport_uss720_read_status in parport_ieee1284_ack_data_avail drivers/parport/ieee1284.c, 577: parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt ./include/linux/parport.h, 474: parport_ieee1284_interrupt in parport_generic_irq drivers/usb/misc/uss720.c, 116: parport_generic_irq in async_complete Note that [FUNC_PTR] means a function pointer call is used. To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC. These bugs are found by my static analysis tool DSAC. Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 691a03cf upstream. As reported by Dan Carpenter, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reported-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit dec3c23c upstream. Commit f16443a0 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks") was based on a serious misunderstanding. It introduced regressions into both the dummy-hcd and net2280 drivers. The problem in dummy-hcd was fixed by commit 7dbd8f4c ("USB: dummy-hcd: Fix erroneous synchronization change"), but the problem in net2280 remains. Namely: the ->disconnect(), ->suspend(), ->resume(), and ->reset() callbacks must be invoked without the private lock held; otherwise a deadlock will occur when the callback routine tries to interact with the UDC driver. This patch largely is a reversion of the relevant parts of f16443a0. It also drops the private lock around the calls to ->suspend() and ->resume() (something the earlier patch forgot to do). This is safe from races with device interrupts because it occurs within the interrupt handler. Finally, the patch changes where the ->disconnect() callback is invoked when net2280_pullup() turns the pullup off. Rather than making the callback from within stop_activity() at a time when dropping the private lock could be unsafe, the callback is moved to a point after the lock has already been dropped. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Fixes: f16443a0 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks") Reported-by:
D. Ziesche <dziesche@zes.com> Tested-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Maxence Duprès authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 9b83a1c3 upstream. WORLDE Controller KS49 or Prodipe MIDI 49C USB controller cause a -EPROTO error, a communication restart and loop again. This issue has already been fixed for KS25. https://lore.kernel.org/patchwork/patch/753077/ I just add device 201 for KS49 in quirks.c to get it works. Signed-off-by:
Laurent Roux <xpros64@hotmail.fr> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 6d4f268f upstream. i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function for the USB driver. So it should not sleep, but it is can sleep according to the function call paths (from bottom to top) in Linux-4.16. [FUNC] msleep drivers/usb/host/u132-hcd.c, 2558: msleep in u132_get_frame drivers/usb/core/hcd.c, 2231: [FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number drivers/usb/core/usb.c, 822: usb_hcd_get_frame_number in usb_get_current_frame_number sound/usb/usx2y/usbusx2yaudio.c, 303: usb_get_current_frame_number in i_usX2Y_urb_complete sound/usb/usx2y/usbusx2yaudio.c, 366: i_usX2Y_urb_complete in i_usX2Y_subs_startup Note that [FUNC_PTR] means a function pointer call is used. To fix this bug, msleep() is replaced with mdelay(). This bug is found by my static analysis tool DSAC. Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit f9a5b4f5 upstream. The steps taken by usb core to set a new interface is very different from what is done on the xHC host side. xHC hardware will do everything in one go. One command is used to set up new endpoints, free old endpoints, check bandwidth, and run the new endpoints. All this is done by xHC when usb core asks the hcd to check for available bandwidth. At this point usb core has not yet flushed the old endpoints, which will cause use-after-free issues in xhci driver as queued URBs are cancelled on a re-allocated endpoint. To resolve this add a call to usb_disable_interface() which will flush the endpoints before calling usb_hcd_alloc_bandwidth() Additional checks in xhci driver will also be implemented to gracefully handle stale URB cancel on freed and re-allocated endpoints Cc: <stable@vger.kernel.org> Reported-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by:
-
Tim Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit f45681f9 upstream. This device does not correctly handle the LPM operations. Also, the device cannot handle ATA pass-through commands and locks up when attempted while running in super speed. This patch adds the equivalent quirk logic as found in uas. Signed-off-by:
Tim Anderson <tsa@biglakesoftware.com> Acked-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit f3dc41c5 upstream. usb_hc_died() should only be called once, and with the primary HCD as parameter. It will mark both primary and secondary hcd's dead. Remove the extra call to usb_cd_died with the shared hcd as parameter. Fixes: ff9d78b3 ("USB: Set usb_hcd->state and flags for shared roothubs") Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit de916736 upstream. val is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue 'map' [r] Fix this by sanitizing val before using it to index map Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
K. Y. Srinivasan authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 86503bd3 upstream. Fix a bug in the key delete code - the num_records range from 0 to num_records-1. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reported-by:
David Binderman <dcb314@hotmail.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Aaron Knister authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 816e846c upstream. Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by:
Aaron Knister <aaron.s.knister@nasa.gov> Tested-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 8edfe2e9 upstream. Commit 822fb18a ("xen-netfront: wait xenbus state change when load module manually") added a new wait queue to wait on for a state change when the module is loaded manually. Unfortunately there is no wakeup anywhere to stop that waiting. Instead of introducing a new wait queue rename the existing module_unload_q to module_wq and use it for both purposes (loading and unloading). As any state change of the backend might be intended to stop waiting do the wake_up_all() in any case when netback_changed() is called. Fixes: 822fb18a ("xen-netfront: wait xenbus state change when load module manually") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Bin Yang authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 831b624d upstream. persistent_ram_vmap() returns the page start vaddr. persistent_ram_iomap() supports non-page-aligned mapping. persistent_ram_buffer_map() always adds offset-in-page to the vaddr returned from these two functions, which causes incorrect mapping of non-page-aligned persistent ram buffer. By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which might not be page aligned. If the offset-in-page > 2048, the vaddr will be in next page. If the next page is not mapped, it will cause kernel panic: [ 0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000 ... [ 0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f ... [ 0.075000] Call Trace: [ 0.075000] ramoops_init_przs.part.10.constprop.15+0x105/0x260 [ 0.075000] ramoops_probe+0x232/0x3a0 [ 0.075000] platform_drv_probe+0x3e/0xa0 [ 0.075000] driver_probe_device+0x2cd/0x400 [ 0.075000] __driver_attach+0xe4/0x110 [ 0.075000] ? driver_probe_device+0x400/0x400 [ 0.075000] bus_for_each_dev+0x70/0xa0 [ 0.075000] driver_attach+0x1e/0x20 [ 0.075000] bus_add_driver+0x159/0x230 [ 0.075000] ? do_early_param+0x95/0x95 [ 0.075000] driver_register+0x70/0xc0 [ 0.075000] ? init_pstore_fs+0x4d/0x4d [ 0.075000] __platform_driver_register+0x36/0x40 [ 0.075000] ramoops_init+0x12f/0x131 [ 0.075000] do_one_initcall+0x4d/0x12c [ 0.075000] ? do_early_param+0x95/0x95 [ 0.075000] kernel_init_freeable+0x19b/0x222 [ 0.075000] ? rest_init+0xbb/0xbb [ 0.075000] kernel_init+0xe/0xfc [ 0.075000] ret_from_fork+0x3a/0x50 Signed-off-by:
Bin Yang <bin.yang@intel.com> [kees: add comments describing the mapping differences, updated commit log] Fixes: 24c3d2f3 ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Parav Pandit authored
BugLink: https://bugs.launchpad.net/bugs/1798587 commit 954a8e3a upstream. When AF_IB addresses are used during rdma_resolve_addr() a lock is not held. A cma device can get removed while list traversal is in progress which may lead to crash. ie CPU0 CPU1 ==== ==== rdma_resolve_addr() cma_resolve_ib_dev() list_for_each() cma_remove_one() cur_dev->device mutex_lock(&lock) list_del(); mutex_unlock(&lock); cma_process_remove(); Therefore, hold a lock while traversing the list which avoids such situation. Cc: <stable@vger.kernel.org> # 3.10 Fixes: f17df3b0 ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
