- 02 May, 2022 31 commits
-
-
Pavel Begunkov authored
It's expensive to make a copy of 40B struct iov_iter to the point it was taking 0.2-0.5% of all cycles in my tests. iov_iter_revert() should be fine as it's a simple case without nested reverts/truncates. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a7e1690c00c5dfe700c30eb9a8a81ec59f6545dd.1650884401.git.asml.silence@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Niels Dossche authored
Current memory failure code in the debugfs returns -ENOSPC. This is normally used for indicating that there is no space left on the device and is not applicable for memory allocation failures. Replace this with -ENOMEM. Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Link: https://lore.kernel.org/r/20220430194656.44357-1-dossche.niels@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Colin Foster says: ==================== ocelot stats improvement A couple of pick-ups after f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats initializer") - one addresses a warning patchwork flagged about operator precedence when using macro arguments. The other is a reduction of unnecessary memory allocation. ==================== Link: https://lore.kernel.org/r/20220430232327.4091825-1-colin.foster@in-advantage.comSigned-off-by: -
Colin Foster authored
Commit 2f187bfa ("net: ethernet: ocelot: remove the need for num_stats initializer") added a macro that patchwork warned it lacked parentheses around an argument. Correct this mistake. Fixes: 2f187bfa ("net: ethernet: ocelot: remove the need for num_stats initializer") Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
-
Colin Foster authored
Commit 2f187bfa ("net: ethernet: ocelot: remove the need for num_stats initializer") added a flags field to the ocelot stats structure. The same behavior can be achieved without this additional field taking up extra memory. Remove this structure element to free up RAM Suggested-by:
-
Jakub Kicinski authored
==================== pull-request: ieee802154-next 2022-05-01 Miquel Raynal landed two patch series bundled in this pull request. The first series re-works the symbol duration handling to better accommodate the needs of the various phy layers in ieee802154. In the second series Miquel improves th errors handling from drivers up mac802154. THis streamlines the error handling throughout the ieee/mac802154 stack in preparation for sync TX to be introduced for MLME frames. ==================== Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.orgSigned-off-by:
-
Paolo Abeni authored
Jakub Kicinski says: ==================== net: more heap allocation and split of rtnl_newlink() Small refactoring of rtnl_newlink() to fix a stack usage warning and make the function shorter. ==================== Link: https://lore.kernel.org/r/20220429235508.268349-1-kuba@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Pure code move. Signed-off-by:
-
Jakub Kicinski authored
__rtnl_newlink() is 250LoC, but has a few clear sections. Move the part which creates a new netdev to a separate function. For ease of review code will be moved in the next change. Signed-off-by:
-
Jakub Kicinski authored
Commit a2939745 ("rtnetlink: avoid frame size warning in rtnl_newlink()") moved to allocating the largest attribute array of rtnl_newlink() on the heap. Kalle reports the stack has grown above 1k again: net/core/rtnetlink.c:3557:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Move more attrs to the heap, wrap them in a struct. Don't bother with linkinfo, it's referenced a lot and we take its size so it's awkward to move, plus it's small (6 elements). Reported-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Andrew Lunn says: ==================== Use MMD/C45 helpers MDIO busses can perform two sorts of bus transaction, defined in clause 22 and clause 45 of 802.3. This results in two register addresses spaces. The current driver structure for indicating if C22 or C45 should be used is messy, and many C22 only bus drivers will wrongly interpret a C45 transaction as a C22 transaction. This patchset is a preparation step to cleanup the situation. It converts MDIO bus users to make use of existing _mmd and _c45 helpers to perform accesses to C45 registers. This will later allow C45 and C22 to be kept separate. ==================== Link: https://lore.kernel.org/r/20220430173037.156823-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special mdio address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Reviewed-by:
-
Andrew Lunn authored
Rather than construct special phy device addresses to access C45 registers, use the mmd helpers. These will directly call the C45 API of the MDIO bus driver. Signed-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by:
-
Paolo Abeni authored
Merge tag 'linux-can-next-for-5.19-20220502' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-05-02 this is a pull request of 9 patches for net-next/master. The first patch is by Biju Das and documents renesas,r9a07g043-canfd support in the renesas,rcar-canfd bindings document. Jakub Kicinski's patch removes a copy of the NAPI_POLL_WEIGHT define from the m_can driver. The last 7 patches all target the ctucanfd driver. Pavel Pisa provides 2 patch which update the documentation. 2 patches by Jiapeng Chong remove unneeded includes and error messages. And another 3 patches by Pavel Pisa to further clean up the driver (remove inline keyword, remove unneeded debug statements, and remove unneeded module parameters). linux-can-next-for-5.19-20220502 * tag 'linux-can-next-for-5.19-20220502' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ctucanfd: remove PCI module debug parameters can: ctucanfd: remove debug statements can: ctucanfd: remove inline keyword from local static functions can: ctucanfd: ctucan_platform_probe(): remove unnecessary print function dev_err() can: ctucanfd: remove unused including <linux/version.h> docs: networking: device drivers: can: ctucanfd: update author e-mail docs: networking: device drivers: can: add ctucanfd to index can: m_can: remove a copy of the NAPI_POLL_WEIGHT define dt-bindings: can: renesas,rcar-canfd: Document RZ/G2UL support ==================== Link: https://lore.kernel.org/r/20220502075914.1905039-1-mkl@pengutronix.deSigned-off-by:
-
Fei Qin authored
VxLAN belongs to UDP-based encapsulation protocol. Inner TSO for VxLAN packet with udpcsum requires offloading of outer header csum. The device doesn't support outer header csum offload. However, inner TSO for VxLAN with udpcsum can still work with GSO_PARTIAL offload, which means outer udp csum computed by stack and inner tcp segmentation finished by hardware. Thus, the patch enable features "NETIF_F_GSO_UDP_TUNNEL_CSUM" and "NETIF_F_GSO_PARTIAL" and set gso_partial_features. Signed-off-by:
Fei Qin <fei.qin@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220430231150.175270-1-simon.horman@corigine.comSigned-off-by:
-
Jaehee Park authored
Add a boilerplate test loop to run all tests in vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to run. Remove the vrf_strict_mode_tests function which is now unused. Signed-off-by:
Jaehee Park <jhpark1013@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-ExtremeSigned-off-by:
-
Paolo Abeni authored
Peilin Ye says: ==================== devices always NETIF_F_LLTX v1: https://lore.kernel.org/netdev/cover.1650580763.git.peilin.ye@bytedance.com/ change since v1: - deleted "depends on patch..." in [1/2]'s commit message This patchset depends on these fixes [1], which has been merged into net-next. Since o_seqno is now atomic_t, we can always turn on NETIF_F_LLTX for [IP6]GRE[TAP] devices, since we no longer need the TX lock (&txq->_xmit_lock). We could probably do the same thing to [IP6]ERSPAN devices as well, but I'm not familiar with them yet. For example, ERSPAN devices are initialized as |= GRE_FEATURES in erspan_tunnel_init(), but I don't see IP6ERSPAN devices being initialized as |= GRE6_FEATURES. Where should we initialize IP6ERSPAN devices' ->features? Please suggest if I'm missing something, thanks! [1] https://lore.kernel.org/netdev/cover.1650575919.git.peilin.ye@bytedance.com/ ==================== Link: https://lore.kernel.org/r/cover.1651207788.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark IP6GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Signed-off-by:
-
Peilin Ye authored
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by:
-
Pavel Pisa authored
This patch removes the PCI module debug parameters, which are not needed anymore, to make both checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Pavel Pisa authored
This patch removes the debug statements from the driver to make checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
-
Pavel Pisa authored
This patch removes the inline keywords from the local static functions to make both checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
-
Jiapeng Chong authored
The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warnings: | drivers/net/can/ctucanfd/ctucanfd_platform.c:67:2-9: | line 67 is redundant because platform_get_irq() already prints an error. Link: https://lore.kernel.org/all/20220421203242.7335-1-jiapeng.chong@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
-
Jiapeng Chong authored
Eliminate the follow versioncheck warning: | drivers/net/can/ctucanfd/ctucanfd_base.c: 34 linux/version.h not needed. Link: https://lore.kernel.org/all/20220421202852.2693-1-jiapeng.chong@linux.alibaba.comReported-by:
-
Pavel Pisa authored
This patch updates the author's email address. Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz Cc: Odrej Ille <ondrej.ille@gmail.com> Signed-off-by:
-
Pavel Pisa authored
This patch adds the ctucanfd-driver document to the index. Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
-
Jakub Kicinski authored
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Link: https://lore.kernel.org/all/20220429174446.196655-1-kuba@kernel.orgSigned-off-by:
-
Biju Das authored
Add CANFD binding documentation for Renesas R9A07G043 (RZ/G2UL) SoC. Link: https://lore.kernel.org/all/20220423130743.123198-1-biju.das.jz@bp.renesas.comSigned-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
- 01 May, 2022 9 commits
-
-
David S. Miller authored
Alexandru Tachici says: ==================== net: phy: adin1100: Add initial support for ADIN1100 industrial PHY The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. The ADIN1100 uses Auto-Negotiation capability in accordance with IEEE 802.3 Clause 98, providing a mechanism for exchanging information between PHYs to allow link partners to agree to a common mode of operation. The concluded operating mode is the transmit amplitude mode and master/slave preference common across the two devices. Both device and LP advertise their ability and request for increased transmit at: - BASE-T1 autonegotiation advertisement register [47:32]\ Clause 45.2.7.21 of Standard 802.3 - BIT(13) - 10BASE-T1L High Level Transmit Operating Mode Ability - BIT(12) - 10BASE-T1L High Level Transmit Operating Mode Request For 2.4 Vpp (high level transmit) operation, both devices need to have the High Level Transmit Operating Mode Ability bit set, and only one of them needs to have the High Level Transmit Operating Mode Request bit set. Otherwise 1.0 Vpp transmit level will be used. Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT1L/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT1L/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT1L/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 10Mb/s Duplex: Full Auto-negotiation: on master-slave cfg: preferred slave master-slave status: slave Port: Twisted Pair PHYAD: 0 Transceiver: external MDI-X: Unknown Link detected: yes SQI: 7/7 1. Add basic support for ADIN1100. Alexandru Ardelean (1): net: phy: adin1100: Add initial support for ADIN1100 industrial PHY 1. Added 10baset-T1L link modes. 2. Added 10-BasetT1L registers. 3. Added Base-T1 auto-negotiation registers. For Base-T1 these registers decide master/slave status and TX voltage of the device and link partner. 4. Added 10BASE-T1L support in phy-c45.c. Now genphy functions will call Base-T1 functions where registers don't match, like the auto-negotiation ones. 5. Convert MSE to SQI using a predefined table and allow user access through ethtool. 6. DT bindings for the 2.4 Vpp transmit mode. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alexandru Tachici authored
Add a tristate property to advertise desired transmit level. If the device supports the 2.4 Vpp operating mode for 10BASE-T1L, as defined in 802.3gc, and the 2.4 Vpp transmit voltage operation is desired, property should be set to 1. This property is used to select whether Auto-Negotiation advertises a request to operate the 10BASE-T1L PHY in increased transmit level mode. If property is set to 1, the PHY shall advertise a request to operate the 10BASE-T1L PHY in increased transmit level mode. If property is set to zero, the PHY shall not advertise a request to operate the 10BASE-T1L PHY in increased transmit level mode. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by:
-
Alexandru Tachici authored
Determine the SQI from MSE using a predefined table for the 10BASE-T1L. Reviewed-by:
-
Alexandru Ardelean authored
The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Alexandru Tachici authored
This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Alexandru Tachici authored
Added BASE-T1 AN advertisement register (Registers 7.514, 7.515, and 7.516) and BASE-T1 AN LP Base Page ability register (Registers 7.517, 7.518, and 7.519). Reviewed-by:
-
Alexandru Tachici authored
The 802.3gc specification defines the 10-BaseT1L link mode for ethernet trafic on twisted wire pair. PMA status register can be used to detect if the phy supports 2.4 V TX level and PCS control register can be used to enable/disable PCS level loopback. Reviewed-by:
-
Alexandru Tachici authored
Add entry for the 10base-T1L full duplex mode. Reviewed-by:
-
Marek Behún authored
All but 5 methods in dsa_swith_ops use tabs for indentation. Change the 5 methods that break this rule. Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
