- 05 Oct, 2014 40 commits
-
-
Nicholas Bellinger authored
commit b53b0d99 upstream. This patch fixes a bug in iscsit_logout_post_handler_diffcid() where a pointer used as storage for list_for_each_entry() was incorrectly being used to determine if no matching entry had been found. This patch changes iscsit_logout_post_handler_diffcid() to key off bool conn_found to determine if the function needs to exit early. Reported-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joern Engel authored
commit 8ae757d0 upstream. In iscsi_copy_param_list() a failed iscsi_param_list memory allocation currently invokes iscsi_release_param_list() to cleanup, and will promptly trigger a NULL pointer dereference. Instead, go ahead and return for the first iscsi_copy_param_list() failure case. Found by coverity. Signed-off-by:
-
Sebastian Herbszt authored
commit 1f0b030c upstream. Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE for setting the supported ALUA access states via configfs, originally introduced in commit b0a382c5. A value of 1 should enable the support, not disable it. Signed-off-by:
Sebastian Herbszt <herbszt@gmx.de> Signed-off-by:
-
Sagi Grimberg authored
commit 0fc4ea70 upstream. disconnected_handler is invoked on several CM events (such as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since multiple events can occur while before isert_free_conn is invoked, we might put all isert_conn references and free the connection too early. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
commit c2f88b17 upstream. In case the connection didn't reach connected state, disconnected handler will never be invoked thus the second kref_put on isert_conn will be missing. Signed-off-by:
-
Ludovic Desroches authored
commit d4f51956 upstream. If touchscreen mode is enabled and a conversion is requested on another channel, the result in the last converted data register can be a touchscreen relative value. Starting a conversion involves to do a conversion for all active channel. It starts with ADC channels and ends with touchscreen channels. Then if ADC_LCD register is not read quickly, its content may be a touchscreen conversion. To remove this temporal constraint, the conversion value is taken from the channel data register. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Subbaraya Sundeep Bhatta authored
commit 1887e724 upstream. This patch fixes incorrect logic for assigning address to auxiliary channels of xilinx xadc. Signed-off-by:
Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Johannes Pointner authored
commit 872687f6 upstream. Fixes: a2c12493 ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs') which improperly assumes that of_iio_channel_get_by_name must always return NULL and thus now hides -EPROBE_DEFER. Signed-off-by:
Johannes Pointner <johannes.pointner@br-automation.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Denis CIOCCA authored
commit a31d0928 upstream. This patch fix gains values. The first driver was designed using engineering samples, in mass production the values are changed. Signed-off-by:
Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit 9e5846be upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by:
-
Srinivas Pandruvada authored
commit f0e84acd upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 04950811 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit b07e3b38 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 0b4dce2e upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 55a6f9dd upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 0668a4e4 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit f1535665 upstream. Instead of a void function, return the trigger pointer. Whilst not in of itself a fix, this makes the following set of 7 fixes cleaner than they would otherwise be. Signed-off-by:
-
Steve French authored
commit da80659d upstream. We were not checking for symlink support properly for SMB2/SMB3 mounts so could oops when mounted with mfsymlinks when try to create symlink when mfsymlinks on smb2/smb3 mounts Signed-off-by:
Steve French <smfrench@gmail.com> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Peter Ujfalusi authored
commit fe0a29e1 upstream. In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture) Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Miklos Szeredi authored
commit b928095b upstream. If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Kees Cook authored
commit 0cacbfbe upstream. The KASLR location-choosing logic needs to avoid the setup_data list memory areas as well. Without this, it would be possible to have the ASLR position stomp on the memory, ultimately causing the boot to fail. Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140911161931.GA12001@www.outflux.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dave Young authored
commit 3eddc69f upstream. 3.16 kernel boot fail with earlyprintk=efi, it keeps scrolling at the bottom line of screen. Bisected, the first bad commit is below: commit 86dfc6f3 Author: Lv Zheng <lv.zheng@intel.com> Date: Fri Apr 4 12:38:57 2014 +0800 ACPICA: Tables: Fix table checksums verification before installation. I did some debugging by enabling both serial and efi earlyprintk, below is some debug dmesg, seems early_ioremap fails in scroll up function due to no free slot, see below dmesg output: WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:116 __early_ioremap+0x90/0x1c4() __early_ioremap(ed00c800, 00000c80) not found slot Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc1+ #204 Hardware name: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.15 05/09/2013 Call Trace: dump_stack+0x4e/0x7a warn_slowpath_common+0x75/0x8e ? __early_ioremap+0x90/0x1c4 warn_slowpath_fmt+0x47/0x49 __early_ioremap+0x90/0x1c4 ? sprintf+0x46/0x48 early_ioremap+0x13/0x15 early_efi_map+0x24/0x26 early_efi_scroll_up+0x6d/0xc0 early_efi_write+0x1b0/0x214 call_console_drivers.constprop.21+0x73/0x7e console_unlock+0x151/0x3b2 ? vprintk_emit+0x49f/0x532 vprintk_emit+0x521/0x532 ? console_unlock+0x383/0x3b2 printk+0x4f/0x51 acpi_os_vprintf+0x2b/0x2d acpi_os_printf+0x43/0x45 acpi_info+0x5c/0x63 ? __acpi_map_table+0x13/0x18 ? acpi_os_map_iomem+0x21/0x147 acpi_tb_print_table_header+0x177/0x186 acpi_tb_install_table_with_override+0x4b/0x62 acpi_tb_install_standard_table+0xd9/0x215 ? early_ioremap+0x13/0x15 ? __acpi_map_table+0x13/0x18 acpi_tb_parse_root_table+0x16e/0x1b4 acpi_initialize_tables+0x57/0x59 acpi_table_init+0x50/0xce acpi_boot_table_init+0x1e/0x85 setup_arch+0x9b7/0xcc4 start_kernel+0x94/0x42d ? early_idt_handlers+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf3/0x100 Quote reply from Lv.zheng about the early ioremap slot usage in this case: """ In early_efi_scroll_up(), 2 mapping entries will be used for the src/dst screen buffer. In drivers/acpi/acpica/tbutils.c, we've improved the early table loading code in acpi_tb_parse_root_table(). We now need 2 mapping entries: 1. One mapping entry is used for RSDT table mapping. Each RSDT entry contains an address for another ACPI table. 2. For each entry in RSDP, we need another mapping entry to map the table to perform necessary check/override before installing it. When acpi_tb_parse_root_table() prints something through EFI earlyprintk console, we'll have 4 mapping entries used. The current 4 slots setting of early_ioremap() seems to be too small for such a use case. """ Thus increase the slot to 8 in this patch to fix this issue. boot-time mappings become 512 page with this patch. Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Stefan Bader authored
commit 0b5a5063 upstream. When RANDOMIZE_BASE (KASLR) is enabled; or the sum of all loaded modules exceeds 512 MiB, then loading modules fails with a warning (and hence a vmalloc allocation failure) because the PTEs for the newly-allocated vmalloc address space are not zero. WARNING: CPU: 0 PID: 494 at linux/mm/vmalloc.c:128 vmap_page_range_noflush+0x2a1/0x360() This is caused by xen_setup_kernel_pagetables() copying level2_kernel_pgt into level2_fixmap_pgt, overwriting many non-present entries. Without KASLR, the normal kernel image size only covers the first half of level2_kernel_pgt and module space starts after that. L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[ 0..255]->kernel [256..511]->module [511]->level2_fixmap_pgt[ 0..505]->module This allows 512 MiB of of module vmalloc space to be used before having to use the corrupted level2_fixmap_pgt entries. With KASLR enabled, the kernel image uses the full PUD range of 1G and module space starts in the level2_fixmap_pgt. So basically: L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[0..511]->kernel [511]->level2_fixmap_pgt[0..505]->module And now no module vmalloc space can be used without using the corrupt level2_fixmap_pgt entries. Fix this by properly converting the level2_fixmap_pgt entries to MFNs, and setting level1_fixmap_pgt as read-only. A number of comments were also using the the wrong L3 offset for level2_kernel_pgt. These have been corrected. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Ross Lagerwall authored
commit 61a734d3 upstream. Always freeze processes when suspending and thaw processes when resuming to prevent a race noticeable with HVM guests. This prevents a deadlock where the khubd kthread (which is designed to be freezable) acquires a usb device lock and then tries to allocate memory which requires the disk which hasn't been resumed yet. Meanwhile, the xenwatch thread deadlocks waiting for the usb device lock. Freezing processes fixes this because the khubd thread is only thawed after the xenwatch thread finishes resuming all the devices. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Christian Borntraeger authored
commit 1951497d upstream. commit 0944fe3f ("s390/mm: implement software referenced bits") triggered another paging/storage key corruption. There is an unhandled invalid->valid pte change where we have to set the real storage key from the pgste. When doing paging a guest page might be swapcache or swap and when faulted in it might be read-only and due to a parallel scan old. An do_wp_page will make it writeable and young. Due to software reference tracking this page was invalid and now becomes valid. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
commit 3e03d4c4 upstream. Since 3.12 or more precisely commit 0944fe3f ("s390/mm: implement software referenced bits") guest storage keys get corrupted during paging. This commit added another valid->invalid translation for page tables - namely ptep_test_and_clear_young. We have to transfer the storage key into the pgste in that case. Signed-off-by:
-
Christian Borntraeger authored
commit ab3f285f upstream. The PFMF instruction handler blindly wrote the storage key even if the page was mapped R/O in the host. Lets try a COW before continuing and bail out in case of errors. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
commit 614a80e4 upstream. In the early days, we had some special handling for the KVM_EXIT_S390_SIEIC exit, but this was gone in 2009 with commit d7b0b5eb (KVM: s390: Make psw available on all exits, not just a subset). Now this switch statement is just a sanity check for userspace not messing with the kvm_run structure. Unfortunately, this allows userspace to trigger a kernel BUG. Let's just remove this switch statement. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Zefan Li authored
commit eb4aec84 upstream. cgroup_pidlist_start() holds cgrp->pidlist_mutex and then calls pidlist_array_load(), and cgroup_pidlist_stop() releases the mutex. It is wrong that we release the mutex in the failure path in pidlist_array_load(), because cgroup_pidlist_stop() will be called no matter if cgroup_pidlist_start() returns errno or not. Fixes: 4bac00d1Signed-off-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Li Zefan authored
commit a4189487 upstream. Run these two scripts concurrently: for ((; ;)) { mkdir /cgroup/sub rmdir /cgroup/sub } for ((; ;)) { echo $$ > /cgroup/sub/cgroup.procs echo $$ > /cgroup/cgroup.procs } A kernel bug will be triggered: BUG: unable to handle kernel NULL pointer dereference at 00000038 IP: [<c10bbd69>] cgroup_put+0x9/0x80 ... Call Trace: [<c10bbe19>] cgroup_kn_unlock+0x39/0x50 [<c10bbe91>] cgroup_kn_lock_live+0x61/0x70 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230 [<c10be5b2>] cgroup_tasks_write+0x12/0x20 [<c10bb7b0>] cgroup_file_write+0x40/0x130 [<c11aee71>] kernfs_fop_write+0xd1/0x160 [<c1148e58>] vfs_write+0x98/0x1e0 [<c114934d>] SyS_write+0x4d/0xa0 [<c16f656b>] sysenter_do_call+0x12/0x12 We clear cgrp->kn->priv in the end of cgroup_rmdir(), but another concurrent thread can access kn->priv after the clearing. We should move the clearing to css_release_work_fn(). At that time no one is holding reference to the cgroup and no one can gain a new reference to access it. v2: - move RCU_INIT_POINTER() into the else block. (Tejun) - remove the cgroup_parent() check. (Tejun) - update the comment in css_tryget_online_from_dir(). Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
-
Alban Crequy authored
commit 71b1fb5c upstream. /proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely. Signed-off-by:
Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by:
-
Mark Brown authored
commit 5c1ebe7f upstream. If the device can't support block writes then don't attempt to use raw syncing which will automatically generate block writes for adjacent registers, use the existing _single() block syncing implementation. Reported-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Mark Brown authored
commit 5844a8b9 upstream. A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by:
-
Lars-Peter Clausen authored
commit 5e0cbe78 upstream. Commit 6cfec04b ("regmap: Separate regmap dev initialization") moved the regmap debugfs initialization after regcache initialization. This means that the regmap debugfs directory is not created yet when the cache initialization runs and so any debugfs files registered by the regcache are created in the debugfs root directory rather than the debugfs directory of the regmap instance. Fix this by adding a separate callback for the regcache debugfs initialization which will be called after the parent debugfs entry has been created. Fixes: 6cfec04b (regmap: Separate regmap dev initialization) Signed-off-by:
-
Tang Chen authored
commit 0cfb8f0c upstream. In memblock_find_in_range_node(), we defined ret as int. But it should be phys_addr_t because it is used to store the return value from __memblock_find_range_bottom_up(). The bug has not been triggered because when allocating low memory near the kernel end, the "int ret" won't turn out to be negative. When we started to allocate memory on other nodes, and the "int ret" could be minus. Then the kernel will panic. A simple way to reproduce this: comment out the following code in numa_init(), memblock_set_bottom_up(false); and the kernel won't boot. Reported-by:
Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Catalin Marinas authored
commit 2520d039 upstream. Commit 5f888a1d (ARM64: perf: support dwarf unwinding in compat mode) changes user_stack_pointer() to return the compat SP for 32-bit tasks but without brackets around the whole definition, with possible issues on the call sites (noticed with a subsequent fix for KSTK_ESP). Fixes: 5f888a1d (ARM64: perf: support dwarf unwinding in compat mode) Reported-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Aaron Lu authored
commit 789eeea1 upstream. The ThinkPad X201s has a working ACPI video backlight interface and is shipped before Win8; then there is BIOS update that starts to query _OSI("Windows 2012") and that would make our video module stop creating backlight interface and caused problem for the user. Add it to the DMI table to disable native backlight to fix this problem. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81691 Link: https://bugzilla.kernel.org/show_bug.cgi?id=51231Reported-and-tested-by:
Yves-Alexis Perez <corsac@debian.org> Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mika Westerberg authored
commit 98d28d0e upstream. There is a typo, it should be negative -errno instead. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 8ab17fc9 upstream. Commit 46394fd0 (ACPI / hotplug: Move container-specific code out of the core) removed the generation of "online" uevents for containers, because "add" uevents are now generated for them automatically when container system devices are registered. However, there are user space tools that need to be notified when the container and all of its children have been enumerated, which doesn't happen any more. For this reason, add a mechanism allowing "online" uevents to be generated for ACPI containers after enumerating the container along with all of its children. Fixes: 46394fd0 (ACPI / hotplug: Move container-specific code out of the core) Reported-and-tested-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Fu Zhonghui authored
commit 45792081 upstream. On some systems (Asus T100 in particular) there are strict ordering dependencies between LPSS devices with respect to power management that break if they suspend/resume asynchronously. In theory it should be possible to follow those dependencies in the async suspend/resume case too (the ACPI tables tell as that the dependencies are there), but since we're missing infrastructure for that at the moment, disable async suspend/resume for all of the LPSS devices for the time being. Link: http://marc.info/?l=linux-acpi&m=141158962321905&w=2 Fixes: 8ce62f85 (ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices) Signed-off-by:
Li Aubrey <aubrey.li@linux.intel.com> Signed-off-by:
Fu Zhonghui <zhonghui.fu@linux.intel.com> [ rjw: Changelog ] Signed-off-by:
-
