- 04 Jun, 2016 4 commits
-
-
Martin Kepplinger authored
Use sign_extend32() instead of open coding sign extension. Signed-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Heinrich Schuchardt authored
The day of month is checked in ds1685_rtc_read_alarm and ds1685_rtc_set_alarm. Multiple errors exist in the day of month check. Operator ! has a higher priority than &&. (!(mday >= 1) && (mday <= 31)) is false for mday == 32. When verifying the day of month the binary and the BCD mode have to be considered. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Colin Ian King authored
This patch fixes a RTC wakealarm issue, namely, the event fires during hibernate and is not cleared from the list, causing hwclock to block. The current enqueuing does not trigger an alarm if any expired timers already exist on the timerqueue. This can occur when a RTC wake alarm is used to wake a machine out of hibernate and the resumed state has old expired timers that have not been removed from the timer queue. This fix skips over any expired timers and triggers an alarm if there are no pending timers on the timerqueue. Note that the skipped expired timer will get reaped later on, so there is no need to clean it up immediately. The issue can be reproduced by putting a machine into hibernate and waking it with the RTC wakealarm. Running the example RTC test program from tools/testing/selftests/timers/rtctest.c after the hibernate will block indefinitely. With the fix, it no longer blocks after the hibernate resume. BugLink: http://bugs.launchpad.net/bugs/1333569Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Arnd Bergmann authored
sparc32:allmodconfig fails to build in next-20160602 as follows. In file included from drivers/block/floppy.c:185:0: include/linux/mc146818rtc.h: In function 'mc146818_is_updating': include/linux/mc146818rtc.h:138:9: error: 'rtc_port' undeclared (first use in this function) include/linux/mc146818rtc.h:138:9: note: each undeclared identifier is reported only once for each function it appears in include/linux/mc146818rtc.h: In function 'mc146818_get_time': include/linux/mc146818rtc.h:172:17: error: 'rtc_port' undeclared (first use in this function) include/linux/mc146818rtc.h: In function 'mc146818_set_time': include/linux/mc146818rtc.h:278:8: error: 'rtc_port' undeclared (first use in this function) scripts/Makefile.build:295: recipe for target 'drivers/block/floppy.o' failed The reason is a duplicate definition of the RTC_PORT macro. The one in arch/sparc/include/asm/io_32.h was apparently used a long time ago for the drivers/char/rtc.c driver that is not available on SPARC any more, since we now select 'RTC_CLASS' unconditionally. Removing the macro fixes the build problem, and for consistency, this also removes the RTC_ALWAYS_BCD macro and the comment for both. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fd09cc80165c ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h") Signed-off-by:
-
- 03 Jun, 2016 16 commits
-
-
Arnd Bergmann authored
No architecture uses the genrtc driver any more, so let's kill it off for good. This now also includes asm-generic/rtc.h, which is otherwise completely unused. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Arnd Bergmann authored
arch/mips/sni/time.c includes asm-generic/rtc.h for no apparent reason, and it works fine without that header, so lets remove the inclusion in preparation of deleting the file. Signed-off-by:
-
Arnd Bergmann authored
All architectures using this driver are now converted to provide their own operations, so this one can be turned into a trivial stub driver relying on its platform data. Signed-off-by:
-
Arnd Bergmann authored
PowerPC is the last architecture using the GEN_RTC driver on some machines, but we can migrate them all to using the RTC_DRV_GENERIC driver instead now. This moves over the CONFIG_GEN_RTC option from drivers/char into arch/powerpc/platforms/Kconfig and makes it just select the replacement driver instead, for the only reason of not breaking existing defconfig and .config files that users may have. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and powerpc has another abstraction on top, which is a bit silly. This changes the powerpc rtc-generic device to provide its rtc_class_ops directly, to reduce the number of layers by one. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
-
Arnd Bergmann authored
The asm/rtc.h header is only used for the old gen_rtc driver that has been replaced by rtc-generic. According to Geert Uytterhoeven, nobody has used the old driver on m68k for a long time, so we can now just remove the header file and disallow the driver in Kconfig. All files that used to include asm/rtc.h are now changed so they include the headers that were used implicitly through asm/rtc.h. Signed-off-by:
-
Arnd Bergmann authored
The q40 platform is the only machine in the kernel that provides RTC_PLL_GET/RTC_PLL_SET ioctl commands in its rtc through the mach_get_rtc_pll/mach_set_rtc_pll callbacks. However, this currenctly works only in the old-style genrtc driver, not the (somewhat) modern rtc-generic driver replacing it. This adds an ioctl implementation to the m68k generic_rtc_ops in order to let both drivers provide the same API. After this, we should be able to remove support for genrtc from the m68k architecture. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and m68k has another abstraction on top, which is a bit silly. This changes the m68k rtc-generic device to provide its rtc_class_ops directly, to reduce the number of layers by one. Signed-off-by:
-
Arnd Bergmann authored
This architecture selects RTC_CLASS unconditionally, so the GEN_RTC has not worked here for a long time. Now we can remove both the asm/rtc.h header and the Kconfig dependency for CONFIG_GEN_RTC. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and on pa-risc, that is implemented using an open-coded version of rtc_time_to_tm/rtc_tm_to_time. This changes the parisc rtc-generic device to provide its rtc_class_ops directly, using the normal helper functions, which makes this y2038 safe (on 32-bit) and simplifies the implementation. Signed-off-by:
-
Arnd Bergmann authored
The genrtc driver serves no purpose on mn10300 because it drives the same hardware as the original rtc.c driver, and the newer rtc-generic.c or rtc-cmos.c drivers on architectures that use the asm-generic/rtc.h header. I assume it was initially only added for completeness when the mn10300 port was done, but the older rtc.c driver was always used instead. We can also stop include asm-generic/rtc.h now, because we just call mc146818_set_time() directly. It would be nice to change the architecture to use the rtc-cmos driver next, and remove support for the old rtc driver as well. [linux@roeck-us.net: Add missing include file to proc-init.c] Signed-off-by:
-
Arnd Bergmann authored
The genrtc driver serves no purpose on Alpha because it drives the same hardware as the original rtc.c driver, and the newer rtc-generic.c or rtc-cmos.c drivers on architectures that use the asm-generic/rtc.h header. The defconfig uses CONFIG_RTC=y, so this driver is not used by default. At one point it was used to abstract a quirk for the "Marvel" platform, but it does not do this any more after the code was moved into yet another driver in arch/alpha/kernel/rtc.c. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and on sh, that goes through another indirection using the rtc_sh_get_time/rtc_sh_set_time functions. This changes the sh rtc-generic device to provide its rtc_class_ops directly, skipping one of the abstraction levels. Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Arnd Bergmann authored
Commit 3195ef59 ("x86: Do full rtc synchronization with ntp") had the side-effect of unconditionally enabling the RTC_LIB symbol on x86, which in turn disables the selection of the CONFIG_RTC and CONFIG_GEN_RTC drivers that contain a two older implementations of the CONFIG_RTC_DRV_CMOS driver. This removes x86 from the list for genrtc, and changes all references to the asm/rtc.h header to instead point to the interfaces from linux/mc146818rtc.h. Signed-off-by:
-
Arnd Bergmann authored
Drivers should not really include stuff from asm-generic directly, and the PC-style cmos rtc driver does this in order to reuse the mc146818 implementation of get_rtc_time/set_rtc_time rather than the architecture specific one for the architecture it gets built for. To make it more obvious what is going on, this moves and renames the two functions into include/linux/mc146818rtc.h, which holds the other mc146818 specific code. Ideally it would be in a .c file, but that would require extra infrastructure as the functions are called by multiple drivers with conflicting dependencies. With this change, the asm-generic/rtc.h header also becomes much more generic, so it can be reused more easily across any architecture that still relies on the genrtc driver. The only caller of the internal __get_rtc_time/__set_rtc_time functions is in arch/alpha/kernel/rtc.c, and we just change those over to the new naming. Signed-off-by:
-
Arnd Bergmann authored
Nothing on these architectures ever includes the asm/mc146818rtc.h file, the drivers that used to do this have been fixed long ago, and the remaining users are all PC-specific. This removes the files for good. Signed-off-by:
-
- 29 May, 2016 5 commits
-
-
Geert Uytterhoeven authored
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by:
-
Uwe Kleine-König authored
rtc drivers are supposed to set values they don't support to -1. To simplify this for drivers and also make it harder for them to get it wrong initialize the values to -1. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
-
- 28 May, 2016 15 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... -
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: -
git://ftp.sciencehorizons.net/linuxLinus Torvalds authored
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac8 ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> -
George Spelvin authored
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: -
George Spelvin authored
Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: -
George Spelvin authored
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.htmlSigned-off-by:
-
George Spelvin authored
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: -
George Spelvin authored
Patch 0fed3ac8 improved the hash mixing, but the function is slower than necessary; there's a 7-instruction dependency chain (10 on x86) each loop iteration. Word-at-a-time access is a very tight loop (which is good, because link_path_walk() is one of the hottest code paths in the entire kernel), and the hash mixing function must not have a longer latency to avoid slowing it down. There do not appear to be any published fast hash functions that: 1) Operate on the input a word at a time, and 2) Don't need to know the length of the input beforehand, and 3) Have a single iterated mixing function, not needing conditional branches or unrolling to distinguish different loop iterations. One of the algorithms which comes closest is Yann Collet's xxHash, but that's two dependent multiplies per word, which is too much. The key insights in this design are: 1) Barring expensive ops like multiplies, to diffuse one input bit across 64 bits of hash state takes at least log2(64) = 6 sequentially dependent instructions. That is more cycles than we'd like. 2) An operation like "hash ^= hash << 13" requires a second temporary register anyway, and on a 2-operand machine like x86, it's three instructions. 3) A better use of a second register is to hold a two-word hash state. With careful design, no temporaries are needed at all, so it doesn't increase register pressure. And this gets rid of register copying on 2-operand machines, so the code is smaller and faster. 4) Using two words of state weakens the requirement for one-round mixing; we now have two rounds of mixing before cancellation is possible. 5) A two-word hash state also allows operations on both halves to be done in parallel, so on a superscalar processor we get more mixing in fewer cycles. I ended up using a mixing function inspired by the ChaCha and Speck round functions. It is 6 simple instructions and 3 cycles per iteration (assuming multiply by 9 can be done by an "lea" instruction): x ^= *input++; y ^= x; x = ROL(x, K1); x += y; y = ROL(y, K2); y *= 9; Not only is this reversible, two consecutive rounds are reversible: if you are given the initial and final states, but not the intermediate state, it is possible to compute both input words. This means that at least 3 words of input are required to create a collision. (It also has the property, used by hash_name() to avoid a branch, that it hashes all-zero to all-zero.) The rotate constants K1 and K2 were found by experiment. The search took a sample of random initial states (I used 1023) and considered the effect of flipping each of the 64 input bits on each of the 128 output bits two rounds later. Each of the 8192 pairs can be considered a biased coin, and adding up the Shannon entropy of all of them produces a score. The best-scoring shifts also did well in other tests (flipping bits in y, trying 3 or 4 rounds of mixing, flipping all 64*63/2 pairs of input bits), so the choice was made with the additional constraint that the sum of the shifts is odd and not too close to the word size. The final state is then folded into a 32-bit hash value by a less carefully optimized multiply-based scheme. This also has to be fast, as pathname components tend to be short (the most common case is one iteration!), but there's some room for latency, as there is a fair bit of intervening logic before the hash value is used for anything. (Performance verified with "bonnie++ -s 0 -n 1536:-2" on tmpfs. I need a better benchmark; the numbers seem to show a slight dip in performance between 4.6.0 and this patch, but they're too noisy to quote.) Special thanks to Bruce fields for diligent testing which uncovered a nasty fencepost error in an earlier version of this patch. [checkpatch.pl formatting complaints noted and respectfully disagreed with.] Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
George Spelvin authored
The "simplified" prime multipliers made very bad hash functions, so get rid of them. This completes the work of 689de1d6. To avoid the inefficiency which was the motivation for the "simplified" multipliers, hash_64() on 32-bit systems is changed to use a different algorithm. It makes two calls to hash_32() instead. drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32 for some horrible reason, so it inherits a copy of the old definition. Signed-off-by:
-
George Spelvin authored
That's all that's ever asked for, and it makes the return type of hash_long() consistent. It also allows (upcoming patch) an optimized implementation of hash_64 on 32-bit machines. I tried adding a BUILD_BUG_ON to ensure the number of bits requested was never more than 32 (most callers use a compile-time constant), but adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler unless tools/perf/MANIFEST is updated, and understanding that code base well enough to update it is too much trouble. I did the rest of an allyesconfig build with such a check, and nothing tripped. Signed-off-by: -
George Spelvin authored
Finally, the first use of previous two patches: eliminate the separate ad-hoc string hash functions in the sunrpc code. Now hash_str() is a wrapper around hash_string(), and hash_mem() is likewise a wrapper around full_name_hash(). Note that sunrpc code *does* call hash_mem() with a zero length, which is why the previous patch needed to handle that in full_name_hash(). (Thanks, Bruce, for finding that!) This also eliminates the only caller of hash_long which asks for more than 32 bits of output. The comment about the quality of hashlen_string() and full_name_hash() is jumping the gun by a few patches; they aren't very impressive now, but will be improved greatly later in the series. Signed-off-by:
-
George Spelvin authored
We'd like to make more use of the highly-optimized dcache hash functions throughout the kernel, rather than have every subsystem create its own, and a function that hashes basic null-terminated strings is required for that. (The name is to emphasize that it returns both hash and length.) It's actually useful in the dcache itself, specifically d_alloc_name(). Other uses in the next patch. full_name_hash() is also tweaked to make it more generally useful: 1) Take a "char *" rather than "unsigned char *" argument, to be consistent with hash_name(). 2) Handle zero-length inputs. If we want more callers, we don't want to make them worry about corner cases. Signed-off-by:
-
