Rafael writes:
  "Power management fix for 4.19-rc6

   Fix incorrect __init and __exit annotations in the Qualcomm
   Kryo cpufreq driver (Nathan Chancellor)."

* tag 'pm-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-kryo: Fix section annotations

There is currently a warning when building the Kryo cpufreq driver into
the kernel image:

WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from
the function qcom_cpufreq_kryo_probe() to the function
.init.text:qcom_cpufreq_kryo_get_msm_id()
The function qcom_cpufreq_kryo_probe() references
the function __init qcom_cpufreq_kryo_get_msm_id().
This is often because qcom_cpufreq_kryo_probe lacks a __init
annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong.

Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id
so that there is no more mismatch warning.

Additionally, Nick noticed that the remove function was marked as
'__init' when it should really be marked as '__exit'.

Fixes: 46e2856b (cpufreq: Add Kryo CPU scaling driver)
Fixes: 5ad7346b (cpufreq: kryo: Add module remove and exit)
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Christoph writes:
  "dma mapping fix for 4.19-rc6

   fix a missing Kconfig symbol for commits introduced in 4.19-rc"

* tag 'dma-mapping-4.19-3' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration

Dmitry writes:
  "Input updates for v4.19-rc5

   Just a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: uinput - allow for max == min during input_absinfo validation
  Input: elantech - enable middle button of touchpad on ThinkPad P72
  Input: atakbd - fix Atari CapsLock behaviour
  Input: atakbd - fix Atari keymap
  Input: egalax_ts - add system wakeup support
  Input: gpio-keys - fix a documentation index issue

Mark writes:
  "spi: Fixes for v4.19

   Quite a few fixes for the Renesas drivers in here, plus a fix for the
   Tegra driver and some documentation fixes for the recently added
   spi-mem code.  The Tegra fix is relatively large but fairly
   straightforward and mechanical, it runs on probe so it's been
   reasonably well covered in -next testing."

* tag 'spi-fix-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-mem: Move the DMA-able constraint doc to the kerneldoc header
  spi: spi-mem: Add missing description for data.nbytes field
  spi: rspi: Fix interrupted DMA transfers
  spi: rspi: Fix invalid SPI use during system suspend
  spi: sh-msiof: Fix handling of write value for SISTR register
  spi: sh-msiof: Fix invalid SPI use during system suspend
  spi: gpio: Fix copy-and-paste error
  spi: tegra20-slink: explicitly enable/disable clock

Merge tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Mark writes:
  "regulator: Fixes for 4.19

   A collection of fairly minor bug fixes here, a couple of driver
   specific ones plus two core fixes.  There's one fix for the new
   suspend state code which fixes some confusion with constant values
   that are supposed to indicate noop operation and another fixing a
   race condition with the creation of sysfs files on new regulators."

* tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix crash caused by null driver data
  regulator: Fix 'do-nothing' value for regulators without suspend state
  regulator: da9063: fix DT probing with constraints
  regulator: bd71837: Disable voltage monitoring for LDO3/4

Michael writes:
  "powerpc fixes for 4.19 #3

   A reasonably big batch of fixes due to me being away for a few weeks.

   A fix for the TM emulation support on Power9, which could result in
   corrupting the guest r11 when running under KVM.

   Two fixes to the TM code which could lead to userspace GPR corruption
   if we take an SLB miss at exactly the wrong time.

   Our dynamic patching code had a bug that meant we could patch freed
   __init text, which could lead to corrupting userspace memory.

   csum_ipv6_magic() didn't work on little endian platforms since we
   optimised it recently.

   A fix for an endian bug when reading a device tree property telling
   us how many storage keys the machine has available.

   Fix a crash seen on some configurations of PowerVM when migrating the
   partition from one machine to another.

   A fix for a regression in the setup of our CPU to NUMA node mapping
   in KVM guests.

   A fix to our selftest Makefiles to make them work since a recent
   change to the shared Makefile logic."

* tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix Makefiles for headers_install change
  powerpc/numa: Use associativity if VPHN hcall is successful
  powerpc/tm: Avoid possible userspace r1 corruption on reclaim
  powerpc/tm: Fix userspace r13 corruption
  powerpc/pseries: Fix unitialized timer reset on migration
  powerpc/pkeys: Fix reading of ibm, processor-storage-keys property
  powerpc: fix csum_ipv6_magic() on little endian platforms
  powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again)
  powerpc: Avoid code patching freed init sections
  KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds

Linus writes:
  "Pin control fixes for v4.19:
   - Fixes to x86 hardware:
   - AMD interrupt debounce issues
   - Faulty Intel cannonlake register offset
   - Revert pin translation IRQ locking"

* tag 'pinctrl-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: intel: Do pin translation when lock IRQ"
  pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant
  pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type

Dave writes:
  "drm fixes for 4.19-rc6

   Looks like a pretty normal week for graphics,

   core: syncobj fix, panel link regression revert
   amd: suspend/resume fixes, EDID emulation fix
   mali-dp: NV12 writeback and vblank reset fixes
   etnaviv: DMA setup fix"

* tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix Edid emulation for linux
  drm/amd/display: Fix Vega10 lightup on S3 resume
  drm/amdgpu: Fix vce work queue was not cancelled when suspend
  Revert "drm/panel: Add device_link from panel device to DRM device"
  drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
  drm/malidp: Fix writeback in NV12
  drm: mali-dp: Call drm_crtc_vblank_reset on device init
  drm/etnaviv: add DMA configuration for etnaviv platform device

Merge tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Palmer writes:
  "A Single RISC-V Update for 4.19-rc6

   The Debian guys have been pushing on our port and found some
   unversioned symbols leaking into modules.  This PR contains a single
   fix for that issue."

* tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: include linux/ftrace.h in asm-prototypes.h

Bjorn writes:
  "PCI fixes:

  - Fix ACPI hotplug issue that causes black screen crash at boot (Mika
    Westerberg)

  - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang)

  - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn
    Helgaas)

  - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)"

* tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  PCI: dwc: Fix scheduling while atomic issues
  MAINTAINERS: Move mobiveil PCI driver entry where it belongs
  MAINTAINERS: Update PPC contacts for PCI core error handling

Commit b2d35fa5 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.

This broke building all the powerpc selftests with eg:

  make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
  BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
  make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
  ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
  make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
  make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
  Makefile:38: recipe for target 'alignment' failed

Fix it by setting top_srcdir in the affected Makefiles.

Fixes: b2d35fa5 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Just a few fixes for 4.19:
- Couple of suspend/resume fixes
- Fix EDID emulation with DC
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927155418.2813-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2018-09-27-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- Revert adding device-link to panels
- Don't leak fences in drm/syncobj
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927152712.GA53076@art_vandelay

Jason writes:
  "Second RDMA rc pull request

   - Fix a long standing race bug when destroying comp_event file descriptors

   - srp, hfi1, bnxt_re: Various driver crashes from missing validation
     and other cases

   - Fixes for regressions in patches merged this window in the gid
     cache, devx, ucma and uapi."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/core: Set right entry state before releasing reference
  IB/mlx5: Destroy the DEVX object upon error flow
  IB/uverbs: Free uapi on destroy
  RDMA/bnxt_re: Fix system crash during RDMA resource initialization
  IB/hfi1: Fix destroy_qp hang after a link down
  IB/hfi1: Fix context recovery when PBC has an UnsupportedVL
  IB/hfi1: Invalid user input can result in crash
  IB/hfi1: Fix SL array bounds check
  RDMA/uverbs: Fix validity check for modify QP
  IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop
  ucma: fix a use-after-free in ucma_resolve_ip()
  RDMA/uverbs: Atomically flush and mark closed the comp event queue
  cxgb4: fix abort_req_rss6 struct

Jan writes:
  "an ext2 patch fixing fsync(2) for DAX mounts."

* tag 'for_v4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2, dax: set ext2_dax_aops for dax files

[Why]
EDID emulation didn't work properly for linux, as we stop programming
if nothing is connected physically.

[How]
We get a flag from DRM when we want to do edid emulation. We check if
this flag is true and nothing is connected physically, if so we only
program the front end using VIRTUAL_SIGNAL.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
There have been a few reports of Vega10 display remaining blank
after S3 resume. The regression is caused by workaround for mode
change on Vega10 - skip set_bandwidth if stream count is 0.
As a result we skipped dispclk reset on suspend, thus on resume
we may skip the clock update assuming it hasn't been changed.
On some systems it causes display blank or 'out of range'.

[How]
Revert "drm/amd/display: Fix Vega10 black screen after mode change"
Verified that it hadn't cause mode change regression.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The vce cancel_delayed_work_sync never be called.
driver call the function in error path.

This caused the A+A suspend hang when runtime pm enebled.
As we will visit the smu in the idle queue. this will cause
smu hang because the dgpu has been suspend, and the dgpu also
will be waked up. As the smu has been hang, so the dgpu resume
will failed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This reverts commit 0c08754b.

commit 0c08754b
("drm/panel: Add device_link from panel device to DRM device")
creates a circular dependency under these circumstances:

1. The panel depends on dsi-host because it is MIPI-DSI child
   device.
2. dsi-host depends on the drm parent device (connector->dev->dev)
   this should be allowed.
3. drm parent dev (connector->dev->dev) depends on the panel
   after this patch.

This makes the dependency circular and while it appears it
does not affect any in-tree drivers (they do not seem to have
dsi hosts depending on the same parent device) this does not
seem right.

As noted in a response from Andrzej Hajda, the intent is
likely to make the panel dependent on the DRM device
(connector->dev) not its parent. But we have no way of
doing that since the DRM device doesn't contain any
struct device on its own (arguably it should).

Revert this until a proper approach is figured out.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org

Fix NV12 writeback and fix vblank reset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921112354.GR936@e110455-lin.cambridge.arm.com

one fix to get a proper DMA configuration in place for the etnaviv
virtual device. I'm sending this as a fix, as a dma-mapping change at
the ARC architecture side during the 4.19 cycle broke etnaviv on this
platform, which gets remedied with this patch, but it also enables
ARM64.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ea1f712bf09bf9439c6b092bf2c2bde7bb01cf5e.camel@pengutronix.de

HP 6730b laptop has an ethernet NIC connected to one of the PCIe root
ports.  The root ports themselves are native PCIe hotplug capable.  Now,
during boot after PCI devices are scanned the BIOS triggers ACPI bus check
directly to the NIC:

  ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event()

It is not clear why it is sending bus check but regardless the ACPI hotplug
notify handler calls enable_slot() directly (instead of going through
acpiphp_check_bridge() as there is no bridge), which ends up handling
special case for non-hotplug bridges with native PCIe hotplug.  This
results a crash of some kind but the reporter only sees black screen so it
is hard to figure out the exact spot and what actually happens.  Based on
a few fix proposals it was tracked to crash somewhere inside
pci_assign_unassigned_bridge_resources().

In any case we should not really be in that special branch at all because
the ACPI notify happened to a slot that is not a PCI bridge (it is just a
regular PCI device).

Fix this so that we only go to that special branch if we are calling
enable_slot() for a bridge (e.g., the ACPI notification was for the
bridge).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201127
Fixes: 84c8b58e ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug")
Reported-by: Peter Anemone <peter.anemone@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org	# v4.18+

We attempt to get fences earlier in the hopes that everything will
already have fences and no callbacks will be needed.  If we do succeed
in getting a fence, getting one a second time will result in a duplicate
ref with no unref.  This is causing memory leaks in Vulkan applications
that create a lot of fences; playing for a few hours can, apparently,
bring down the system.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107899Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926071703.15257-1-jason.ekstrand@intel.com

Joerg writes:
  "IOMMU Fixes for Linux v4.19-rc5

   Three fixes queued up:

	- Warning fix for Rockchip IOMMU where there were IRQ handlers
	  for offlined hardware.

	- Fix for Intel VT-d because recent changes caused boot failures
	  on some machines because it tried to allocate to much
	  contiguous memory.

	- Fix for AMD IOMMU to handle eMMC devices correctly that appear
	  as ACPI HID devices."

* tag 'iommu-fixes-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Return devid as alias for ACPI HID devices
  iommu/vt-d: Handle memory shortage on pasid table allocation
  iommu/rockchip: Free irqs in shutdown handler

ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Fixes: 2bf9a0a1 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The patch adding the infrastructure failed to actually add the symbol
declaration, oops..

Fixes: faef8772 ("dma-noncoherent: add a arch_sync_dma_for_cpu_all hook")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently add_modify_gid() for IB link layer has followong issue
in cache update path.

When GID update event occurs, core releases reference to the GID
table without updating its state and/or entry pointer.

CPU-0                              CPU-1
------                             -----
ib_cache_update()                    IPoIB ULP
   add_modify_gid()                   [..]
      put_gid_entry()
      refcnt = 0, but
      state = valid,
      entry is valid.
      (work item is not yet executed).
                                   ipoib_create_ah()
                                     rdma_create_ah()
                                        rdma_get_gid_attr() <--
                                   	Tries to acquire gid_attr
                                        which has refcnt = 0.
                                   	This is incorrect.

GID entry state and entry pointer is provides the accurate GID enty
state. Such fields must be updated with rwlock to protect against
readers and, such fields must be in sane state before refcount can drop
to zero. Otherwise above race condition can happen leading to
use-after-free situation.

Following backtrace has been observed when cache update for an IB port
is triggered while IPoIB ULP is creating an AH.

Therefore, when updating GID entry, first mark a valid entry as invalid
through state and set the barrier so that no callers can acquired
the GID entry, followed by release reference to it.

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:refcount_inc_checked+0x30/0x50
RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100
RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b
R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8
R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202
FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0
IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready
Call Trace:
rdma_get_gid_attr+0x220/0x310 [ib_core]
? lock_acquire+0x145/0x3a0
rdma_fill_sgid_attr+0x32c/0x470 [ib_core]
rdma_create_ah+0x89/0x160 [ib_core]
? rdma_fill_sgid_attr+0x470/0x470 [ib_core]
? ipoib_create_ah+0x52/0x260 [ib_ipoib]
ipoib_create_ah+0xf5/0x260 [ib_ipoib]
ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib]

Fixes: b150c386 ("IB/core: Introduce GID entry reference counts")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Upon DEVX object creation the object must be destroyed upon a follows
error flow.

Fixes: 7efce369 ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Make sure we free struct uverbs_api once we clean the radix tree. It was
allocated by uverbs_alloc_api().

Fixes: 9ed3e5f4 ("IB/uverbs: Build the specs into a radix tree at runtime")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Dan writes:
  "libnvdimm/dax for 4.19-rc6

  * (2) fixes for the dax error handling updates that were merged for
  v4.19-rc1. My mails to Al have been bouncing recently, so I do not have
  his ack but the uaccess change is of the trivial / obviously correct
  variety. The address_space_operations fixes a regression.

  * A filesystem-dax fix to correct the zero page lookup to be compatible
   with non-x86 (mips and s390) architectures."

* tag 'libnvdimm-fixes-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: Add missing address_space_operations
  uaccess: Fix is_source param for check_copy_size() in copy_to_iter_mcsafe()
  filesystem-dax: Fix use of zero page

James writes:
  "SCSI fixes on 20180925

   Nine obvious bug fixes mostly in individual drivers.  The target fix
   is of particular importance because it's CVE related."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: don't crash the host on invalid commands
  scsi: ipr: System hung while dlpar adding primary ipr adapter back
  scsi: target: iscsi: Use bin2hex instead of a re-implementation
  scsi: target: iscsi: Use hex2bin instead of a re-implementation
  scsi: lpfc: Synchronize access to remoteport via rport
  scsi: ufs: Disable blk-mq for now
  scsi: sd: Contribute to randomness when running rotational device
  scsi: ibmvscsis: Ensure partition name is properly NUL terminated
  scsi: ibmvscsis: Fix a stringop-overflow warning

I wrote:
  "USB fixes for 4.19-rc6

   Here are some small USB core and driver fixes for reported issues for
   4.19-rc6.

   The most visible is the oops fix for when the USB core is built into the
   kernel that is present in 4.18.  Turns out not many people actually do
   that so it went unnoticed for a while.  The rest is some tiny typec,
   musb, and other core fixes.

   All have been in linux-next with no reported issues."

* tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: mux: Take care of driver module reference counting
  usb: core: safely deal with the dynamic quirk lists
  usb: roles: Take care of driver module reference counting
  USB: handle NULL config in usb_find_alt_setting()
  USB: fix error handling in usb_driver_claim_interface()
  USB: remove LPM management from usb_driver_claim_interface()
  USB: usbdevfs: restore warning for nonsensical flags
  USB: usbdevfs: sanitize flags more
  Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"
  usb: musb: dsps: do not disable CPPI41 irq in driver teardown

I wrote:
  "TTY/Serial driver fixes for 4.19-rc6

   Here are a number of small tty and serial driver fixes for reported
   issues for 4.19-rc6.

   One should hopefully resolve a much-reported issue that syzbot has found
   in the tty layer.  Although there are still more issues there, getting
   this fixed is nice to see finally happen.

   All of these have been in linux-next for a while with no reported
   issues."

* tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: imx: restore handshaking irq for imx1
  tty: vt_ioctl: fix potential Spectre v1
  tty: Drop tty->count on tty_reopen() failure
  serial: cpm_uart: return immediately from console poll
  tty: serial: lpuart: avoid leaking struct tty_struct
  serial: mvebu-uart: Fix reporting of effective CSIZE to userspace

Greg (well I), wrote:
  "Char/Misc driver fixes for 4.19-rc6

   Here are some soundwire and intel_th (tracing) driver fixes for some
   reported issues.

   All of these have been in linux-next for a week with no reported issues."

* tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  intel_th: pci: Add Ice Lake PCH support
  intel_th: Fix resource handling for ACPI glue layer
  intel_th: Fix device removal logic
  soundwire: Fix acquiring bus lock twice during master release
  soundwire: Fix incorrect exit after configuring stream
  soundwire: Fix duplicate stream state assignment

Currently associativity is used to lookup node-id even if the
preceding VPHN hcall failed. However this can cause CPU to be made
part of the wrong node, (most likely to be node 0). This is because
VPHN is not enabled on KVM guests.

With 2ea62630 ("powerpc/topology: Get topology for shared processors at
boot"), associativity is used to set to the wrong node. Hence KVM
guest topology is broken.

For example : A 4 node KVM guest before would have reported.

  [root@localhost ~]#  numactl -H
  available: 4 nodes (0-3)
  node 0 cpus: 0 1 2 3
  node 0 size: 1746 MB
  node 0 free: 1604 MB
  node 1 cpus: 4 5 6 7
  node 1 size: 2044 MB
  node 1 free: 1765 MB
  node 2 cpus: 8 9 10 11
  node 2 size: 2044 MB
  node 2 free: 1837 MB
  node 3 cpus: 12 13 14 15
  node 3 size: 2044 MB
  node 3 free: 1903 MB
  node distances:
  node   0   1   2   3
    0:  10  40  40  40
    1:  40  10  40  40
    2:  40  40  10  40
    3:  40  40  40  10

Would now report:

  [root@localhost ~]# numactl -H
  available: 4 nodes (0-3)
  node 0 cpus: 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 0 size: 1746 MB
  node 0 free: 1244 MB
  node 1 cpus:
  node 1 size: 2044 MB
  node 1 free: 2032 MB
  node 2 cpus: 1
  node 2 size: 2044 MB
  node 2 free: 2028 MB
  node 3 cpus:
  node 3 size: 2044 MB
  node 3 free: 2032 MB
  node distances:
  node   0   1   2   3
    0:  10  40  40  40
    1:  40  10  40  40
    2:  40  40  10  40
    3:  40  40  40  10

Fix this by skipping associativity lookup if the VPHN hcall failed.

Fixes: 2ea62630 ("powerpc/topology: Get topology for shared processors at boot")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Current we store the userspace r1 to PACATMSCRATCH before finally
saving it to the thread struct.

In theory an exception could be taken here (like a machine check or
SLB miss) that could write PACATMSCRATCH and hence corrupt the
userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but
others do.

We've never actually seen this happen but it's theoretically
possible. Either way, the code is fragile as it is.

This patch saves r1 to the kernel stack (which can't fault) before we
turn MSR[RI] back on. PACATMSCRATCH is still used but only with
MSR[RI] off. We then copy r1 from the kernel stack to the thread
struct once we have MSR[RI] back on.
Suggested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When we treclaim we store the userspace checkpointed r13 to a scratch
SPR and then later save the scratch SPR to the user thread struct.

Unfortunately, this doesn't work as accessing the user thread struct
can take an SLB fault and the SLB fault handler will write the same
scratch SPRG that now contains the userspace r13.

To fix this, we store r13 to the kernel stack (which can't fault)
before we access the user thread struct.

Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen
as a random userspace segfault with r13 looking like a kernel address.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pasid table memory allocation could return failure due to memory
shortage. Limit the pasid table size to 1MiB because current 8MiB
contiguous physical memory allocation can be hard to come by. W/o
a PASID table, the device could continue to work with only shared
virtual memory impacted. So, let's go ahead with context mapping
even the memory allocation for pasid table failed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783
Fixes: cc580e41 ("iommu/vt-d: Per PCI device pasid table interfaces")

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Pelton Kyle D <kyle.d.pelton@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This changes UAPI, breaking iwd and libell:

  ell/key.c: In function 'kernel_dh_compute':
  ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'?
    struct keyctl_dh_params params = { .private = private,
                                        ^~~~~~~
                                        dh_private

This reverts commit 8a2336e5.

Fixes: 8a2336e5 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: James Morris <jmorris@namei.org>
cc: "Serge E. Hallyn" <serge@hallyn.com>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: <stable@vger.kernel.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>