Older systems will not populate the security attributes in the
capabilities register. The PSP on these systems, however, does have a
command to get the security attributes. Use this command during ccp
startup to populate the attributes if they're missing.

Closes: https://github.com/fwupd/fwupd/issues/5284
Closes: https://github.com/fwupd/fwupd/issues/5675
Closes: https://github.com/fwupd/fwupd/issues/6253
Closes: https://github.com/fwupd/fwupd/issues/7280
Closes: https://github.com/fwupd/fwupd/issues/6323
Closes: https://github.com/fwupd/fwupd/discussions/5433Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Align the whitespace so that future messages will also be better
aligned.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To prepare for other code that will manipulate security attributes
move the handling code out of sp-pci.c. No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Making the capabilities register a union makes it easier to refer
to the members instead of always doing bit shifts.

No intended functional changes.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The finalize operation in interrupt mode produce a produces a spinlock
recursion warning. The reason is the fact that BH must be disabled
during this process.
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This flag is needed to make the driver visible from openssl and cryptodev.
Signed-off-by: Maxime Méré <maxime.mere@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Increase STM32 CRYP priority, to be greater than the ARM-NEON
accelerated version.
Signed-of-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use DMA when buffer are aligned and with expected size.

If buffer are correctly aligned and bigger than 1KB we have some
performance gain:

With DMA enable:
$ openssl speed -evp aes-256-cbc -engine afalg -elapsed
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-256-cbc        120.02k      406.78k     1588.82k     5873.32k    26020.52k    34258.94k

Without DMA:
$ openssl speed -evp aes-256-cbc -engine afalg -elapsed
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-256-cbc        121.06k      419.95k     1112.23k     1897.47k     2362.03k     2386.60k

With DMA:
extract of
$ modprobe tcrypt mode=500
testing speed of async cbc(aes) (stm32-cbc-aes) encryption
tcrypt: test 14 (256 bit key,   16 byte blocks): 1 operation in  1679 cycles (16 bytes)
tcrypt: test 15 (256 bit key,   64 byte blocks): 1 operation in  1893 cycles (64 bytes)
tcrypt: test 16 (256 bit key,  128 byte blocks): 1 operation in  1760 cycles (128 bytes)
tcrypt: test 17 (256 bit key,  256 byte blocks): 1 operation in  2154 cycles (256 bytes)
tcrypt: test 18 (256 bit key, 1024 byte blocks): 1 operation in  2132 cycles (1024 bytes)
tcrypt: test 19 (256 bit key, 1424 byte blocks): 1 operation in  2466 cycles (1424 bytes)
tcrypt: test 20 (256 bit key, 4096 byte blocks): 1 operation in  4040 cycles (4096 bytes)

Without DMA:
$ modprobe tcrypt mode=500
tcrypt: test 14 (256 bit key,   16 byte blocks): 1 operation in  1671 cycles (16 bytes)
tcrypt: test 15 (256 bit key,   64 byte blocks): 1 operation in  2263 cycles (64 bytes)
tcrypt: test 16 (256 bit key,  128 byte blocks): 1 operation in  2881 cycles (128 bytes)
tcrypt: test 17 (256 bit key,  256 byte blocks): 1 operation in  4270 cycles (256 bytes)
tcrypt: test 18 (256 bit key, 1024 byte blocks): 1 operation in 11537 cycles (1024 bytes)
tcrypt: test 19 (256 bit key, 1424 byte blocks): 1 operation in 15025 cycles (1424 bytes)
tcrypt: test 20 (256 bit key, 4096 byte blocks): 1 operation in 40747 cycles (4096 bytes)
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Public key blob is not just x and y concatenated. It follows RFC5480
section 2.2. Address this by re-documenting the function with the
correct description of the format.

Link: https://datatracker.ietf.org/doc/html/rfc5480
Fixes: 4e660291 ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

amd_rng_mod_init() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned as is but amd_rng_mod_init() is
a module_init() function that should return normal errnos.

Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.

Fixes: 96d63c02 ("[PATCH] Add AMD HW RNG driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since crypto_shash_setkey(), crypto_ahash_setkey(),
crypto_skcipher_setkey(), and crypto_aead_setkey() apparently need to
work in no-SIMD context on some architectures, make the self-tests cover
this scenario.  Specifically, sometimes do the setkey while under
crypto_disable_simd_for_test(), and do this independently from disabling
SIMD for the other parts of the crypto operation since there is no
guarantee that all parts happen in the same context.  (I.e., drivers
mustn't store the key in different formats for SIMD vs. no-SIMD.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix negated variable return value.

Fixes: e05ce444 ("crypto: atmel-sha204a - add reading from otp zone")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-crypto/34cd4179-090e-479d-b459-8d0d35dd327d@moroto.mountain/Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The only iommu function call in this driver is a
tegra_dev_iommu_get_stream_id() which does not allocate anything and does
not take any reference.

So there is no point in calling iommu_fwspec_free() in the remove function.

Remove this incorrect function call.

Fixes: 0880bb3b ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/cast_common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/af_alg.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/algif_hash.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/algif_skcipher.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/ecc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/curve25519-generic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/xor.o
WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/crypto_simd.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The NEON implementation of crctd10dif is registered with a priority of 100
which is identical to that used by the generic C implementation. Raise the
priority to 150, half way between the PMULL based implementation and the
NEON one, so that it will be preferred over the generic implementation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The boot-test-finished toggle is only necessary if algapi
is built into the kernel.  Do not include this code if it is a module.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Defined CRYPTO_CURVE25519_PPC64 to support X25519 for ppc64le.

Added new module curve25519-ppc64le for X25519.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

X25519 core functions to handle scalar multiplication for ppc64le.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the perl output of x25519-ppc64.pl from CRYPTOGAMs
(see https://github.com/dot-asm/cryptogams/) and added four
supporting functions, x25519_fe51_sqr_times, x25519_fe51_frombytes,
x25519_fe51_tobytes and x25519_cswap.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mapings should be replaced by mappings.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'n2_skcipher_request_context' was added in
commit 23a6564a ("crypto: niagara2 - switch to skcipher API")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove 'hifn_mac_command' and 'hifn_comp_command' which are unused.
They're the same structure as 'hifn_crypt_command' which is used.

(I was tempted to remove
   hifn_base_result
   hifn_comp_result
   hifn_mac_result and
   hifn_crypt_result
which are also unused, but they vary, and perhaps they're telling
someone in the future what to look at.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'tdes_keys' appears unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'dbgfs_u32' appears unused.
Remove it.
(pdma_stat_descr is also unused, but I'm assuming it's
some useful layout description of firmware/hardware
so best left in)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

Pull irq fixes from Ingo Molnar:

 - Fix x86 IRQ vector leak caused by a CPU offlining race

 - Fix build failure in the riscv-imsic irqchip driver
   caused by an API-change semantic conflict

 - Fix use-after-free in irq_find_at_or_after()

* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
  genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
  irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict

Pull x86 fixes from Ingo Molnar:

 - Fix regressions of the new x86 CPU VFM (vendor/family/model)
   enumeration/matching code

 - Fix crash kernel detection on buggy firmware with
   non-compliant ACPI MADT tables

 - Address Kconfig warning

* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
  crypto: x86/aes-xts - switch to new Intel CPU model defines
  x86/topology: Handle bogus ACPI tables correctly
  x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y

Pull ipmi updates from Corey Minyard:
 "Mostly updates for deprecated interfaces, platform.remove and
  converting from a tasklet to a BH workqueue.

  Also use HAS_IOPORT for disabling inb()/outb()"

* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
  ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
  ipmi: ipmi_ssif: Convert to platform remove callback returning void
  ipmi: ipmi_si_platform: Convert to platform remove callback returning void
  ipmi: ipmi_powernv: Convert to platform remove callback returning void
  ipmi: bt-bmc: Convert to platform remove callback returning void
  char: ipmi: handle HAS_IOPORT dependencies
  ipmi: Convert from tasklet to BH workqueue

Pull ceph updates from Ilya Dryomov:
 "A series from Xiubo that adds support for additional access checks
  based on MDS auth caps which were recently made available to clients.

  This is needed to prevent scenarios where the MDS quietly discards
  updates that a UID-restricted client previously (wrongfully) acked to
  the user.

  Other than that, just a documentation fixup"

* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
  doc: ceph: update userspace command to get CephFS metadata
  ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
  ceph: check the cephx mds auth access for async dirop
  ceph: check the cephx mds auth access for open
  ceph: check the cephx mds auth access for setattr
  ceph: add ceph_mds_check_access() helper
  ceph: save cap_auths in MDS client when session is opened

Pull ntfs3 updates from Konstantin Komarov:
 "Fixes:
   - reusing of the file index (could cause the file to be trimmed)
   - infinite dir enumeration
   - taking DOS names into account during link counting
   - le32_to_cpu conversion, 32 bit overflow, NULL check
   - some code was refactored

  Changes:
   - removed max link count info display during driver init

  Remove:
   - atomic_open has been removed for lack of use"

* tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Break dir enumeration if directory contents error
  fs/ntfs3: Fix case when index is reused during tree transformation
  fs/ntfs3: Mark volume as dirty if xattr is broken
  fs/ntfs3: Always make file nonresident on fallocate call
  fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode
  fs/ntfs3: Use variable length array instead of fixed size
  fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow
  fs/ntfs3: Check 'folio' pointer for NULL
  fs/ntfs3: Missed le32_to_cpu conversion
  fs/ntfs3: Remove max link count info display during driver init
  fs/ntfs3: Taking DOS names into account during link counting
  fs/ntfs3: remove atomic_open
  fs/ntfs3: use kcalloc() instead of kzalloc()

Pull smb server fixes from Steve French:
 "Two ksmbd server fixes, both for stable"

* tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: ignore trailing slashes in share paths
  ksmbd: avoid to send duplicate oplock break notifications

Pull RTC updates from Alexandre Belloni:
 "There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

Pull i3c updates from Alexandre Belloni:
 "Runtime PM (power management) is improved and hot-join support has
  been added to the dw controller driver.

  Core:
   - Allow device driver to trigger controller runtime PM

  Drivers:
   - dw: hot-join support
   - svc: better IBI handling"

* tag 'i3c/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: dw: Add hot-join support.
  i3c: master: Enable runtime PM for master controller
  i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
  i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame
  i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers()