- 15 Apr, 2022 16 commits
-
-
Marco Chiappero authored
Replace hard coded VF masks in adf_gen2_pfvf.c with the recently introduced ADF_GEN2_VF_MSK. Signed-off-by:
Marco Chiappero <marco.chiappero@intel.com> Reviewed-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Marco Chiappero authored
Change the VF2PF interrupt handler in the PF ISR and the definition of the internal PFVF API to correct the current implementation, which can result in missed interrupts. More specifically, current HW generations consider a write to the mask register, regardless of the value, as an acknowledge of any pending VF2PF interrupt. Therefore, if there is an interrupt between the source register read and the mask register write, such interrupt will not be delivered and silently acknowledged, resulting in a lost VF2PF message. To work around the problem, rather than disabling specific interrupts, disable all the interrupts and re-enable only the ones that we are not serving (excluding the already disabled ones too). This will force any other pending interrupt to be triggered and be serviced by a subsequent ISR. This new approach requires, however, changes to the interrupt related pfvf_ops functions. In particular, get_vf2pf_sources() has now been removed in favor of disable_pending_vf2pf_interrupts(), which not only retrieves and returns the pending (and enabled) sources, but also disables them. As a consequence, introduce the adf_disable_pending_vf2pf_interrupts() utility in place of adf_disable_vf2pf_interrupts_irq(), which is no longer needed. Cc: stable@vger.kernel.org Fixes: 993161d3 ("crypto: qat - fix handling of VF to PF interrupts") Signed-off-by:
-
Marco Chiappero authored
PFVF Block Message requests for CRC use 0-based values to indicate amounts, which have to be remapped to 1-based values on the receiving side. This patch fixes one debug print which was however using the wire value. Signed-off-by:
-
Marco Chiappero authored
Remove an unintentional extra space and improve the readability of a PFVF related code comment. Signed-off-by:
-
Marco Chiappero authored
Spurious PFVF interrupts can happen when either the ISR is invoked without a valid source being set or, otherwise, when no interrupt bit is set in the PFVF register containing the message. The latter test was present for GEN2 devices but missing for GEN4, this patch fills the gap. Signed-off-by:
-
Wojciech Ziemba authored
PFVF protocol version 0 is not a valid version, but PF drivers currently would report any such version from VFs as compatible. This patch adds an extra check for the invalid PFVF protocol version 0. Signed-off-by:
Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by:
-
Marco Chiappero authored
VF drivers are notified via PFVF of the VFs being disabled, but such notification was not propagated within the VF driver. Dispatch the ADF_EVENT_RESTARTING event by adding a missing call to adf_dev_restarting_notify(). Signed-off-by:
-
Marco Chiappero authored
Previously, the GEN4 host driver supported SR-IOV but had no working implementation of the PFVF protocol to communicate with VF drivers. Since all the host drivers for QAT devices now support both SR-IOV and PFVF, remove the old and unnecessary checks to test PFVF support. Signed-off-by:
-
Giovanni Cabiddu authored
The functions adf_enable_pf2vf_interrupts(), adf_flush_vf_wq() and adf_disable_pf2vf_interrupts() are not referenced when the driver is compiled with CONFIG_PCI_IOV=n. This patch removes these unused stubs. Signed-off-by:
-
Marco Chiappero authored
Remove unnecessary braces around a single statement in a for loop. Signed-off-by:
-
Marco Chiappero authored
When the driver starts the device, it enables all the necessary interrupts. However interrupts associated to host rings are enabled by default on all GEN2 devices (except for dh895x) even when SR-IOV is active. Fix this behaviour by checking if data structures associated to VFs have been allocated to determine whether to enable such interrupts or not. Since the logic for the fix is the same across GEN2 devices, replace the function to be fixed (adf_enable_ints()) with a single one (adf_gen2_enable_ints()) in the common GEN2 code in adf_gen2_hw_data.c. Likewise, remove the unnecessary duplication of defines too. Signed-off-by:
-
Giovanni Cabiddu authored
The capability detection logic clears bits for the features that are disabled in a certain SKU. For example, if the bit associate to compression is not present in the LEGFUSE register, the correspondent bit is cleared in the capability mask. This change adds the compression capability to the mask as this was missing in the commit that enhanced the capability detection logic. Fixes: cfe4894e ("crypto: qat - set COMPRESSION capability for QAT GEN2") Signed-off-by:
-
Giovanni Cabiddu authored
Set the CIPHER capability for QAT DH895XCC devices if the hardware supports it. This is done if both the CIPHER and the AUTHENTICATION engines are available on the device. Fixes: ad1332aa ("crypto: qat - add support for capability detection") Signed-off-by:
-
Gilad Ben-Yossef authored
Use a fine grained specification of DMA mapping directions in certain cases, allowing both a more optimized operation as well as shushing out a harmless, though persky dma-debug warning. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Reported-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Rearrange init calls to avoid the rare race condition of the cipher algs being registered and used while we still init the hash code which uses the HW without proper lock. Signed-off-by:
Dung Nguyen <dung.nguyen.zy@renesas.com> Tested-by:
Jing Dan <jing.dan.nx@renesas.com> Tested-by:
-
Robin Murphy authored
Even if an IOMMU might be present for some PCI segment in the system, that doesn't necessarily mean it provides translation for the device we care about. Replace iommu_present() with a more appropriate check. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
-
- 08 Apr, 2022 14 commits
-
-
Jakob Koschel authored
When list_for_each_entry() completes the iteration over the whole list without breaking the loop, the iterator value will be a bogus pointer computed based on the head element. While it is safe to use the pointer to determine if it was computed based on the head element, either with list_entry_is_head() or &pos->member == head, using the iterator variable after the loop should be avoided. In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by:
Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by:
-
Mario Limonciello authored
CC_ATTR_HOST_MEM_ENCRYPT is used to relay that memory encryption has been activated by the kernel. As it's technically possible to enable both SME and TSME at the same time, detect this scenario and notify the user that enabling TSME and SME at the same time is unnecessary. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Mario Limonciello authored
Previously the PSP probe routine would fail if both SEV and TEE were missing. This is possibly the case for some client parts. As capabilities can now be accessed from userspace, it may still be useful to have the PSP driver finish loading so that those capabilities can be read. Signed-off-by:
-
Mario Limonciello authored
The PSP sets several pre-defined bits in the capabilities register to indicate that security attributes of the platform. Export these attributes into userspace for administrators to confirm platform is properly locked down. Acked-by:
-
Mario Limonciello authored
The results of the capability register will be used by future code at runtime rather than just initialization. Acked-by:
-
Eric Biggers authored
As was established in the thread https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/T/#u, many crypto API users doing in-place en/decryption don't use the same scatterlist pointers for the source and destination, but rather use separate scatterlists that point to the same memory. This case isn't tested by the self-tests, resulting in bugs. This is the natural usage of the crypto API in some cases, so requiring API users to avoid this usage is not reasonable. Therefore, update the self-tests to start testing this case. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Randy Dunlap authored
Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Fixes: 64b94cea ("crypto: blowfish - add x86_64 assembly implementation") Fixes: 676a3804 ("crypto: camellia-x86_64 - module init/exit functions should be static") Fixes: 0b95ec56 ("crypto: camellia - add assembler implementation for x86_64") Fixes: 56d76c96 ("crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher") Fixes: b9f535ff ("[CRYPTO] twofish: i586 assembly version") Fixes: ff0a70fe ("crypto: twofish-x86_64-3way - module init/exit functions should be static") Fixes: 8280daad ("crypto: twofish - add 3-way parallel x86_64 assembler implemention") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Joachim Fritschi <jfritschi@freenet.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: x86@kernel.org Signed-off-by:
-
Hui Tang authored
A 'dma_wmb' barrier is enough to guarantee previous writes before accessing by acc device in the outer shareable domain. A 'smp_wmb' barrier is enough to guarantee previous writes before accessing by other cpus in the inner shareble domain. Signed-off-by:
Hui Tang <tanghui20@huawei.com> Signed-off-by:
-
Yang Li authored
Add the description of @need_pump in crypto_transfer_request() kernel-doc comment to remove warning found by running scripts/kernel-doc, which is caused by using 'make W=1'. crypto/crypto_engine.c:260: warning: Function parameter or member 'need_pump' not described in 'crypto_transfer_request' Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Tianjia Zhang authored
This adds ARMv8 implementations of SM4 in ECB, CBC, CFB and CTR modes using Crypto Extensions, also includes key expansion operations because the Crypto Extensions instruction is much faster than software implementations. The Crypto Extensions for SM4 can only run on ARMv8 implementations that have support for these optional extensions. Benchmark on T-Head Yitian-710 2.75 GHz, the data comes from the 218 mode of tcrypt. The abscissas are blocks of different lengths. The data is tabulated and the unit is Mb/s: sm4-generic | 16 64 128 256 1024 1420 4096 ECB enc | 80.05 91.42 93.66 94.77 95.69 95.77 95.86 ECB dec | 79.98 91.41 93.64 94.76 95.66 95.77 95.85 CBC enc | 78.55 86.50 88.02 88.77 89.36 89.42 89.48 CBC dec | 76.82 89.06 91.52 92.77 93.75 93.83 93.96 CFB enc | 77.64 86.13 87.62 88.42 89.08 88.83 89.18 CFB dec | 77.57 88.34 90.36 91.45 92.34 92.00 92.44 CTR enc | 77.80 88.28 90.23 91.22 92.11 91.81 92.25 CTR dec | 77.83 88.22 90.22 91.22 92.04 91.82 92.28 sm4-neon ECB enc | 28.31 112.77 203.03 209.89 215.49 202.11 210.59 ECB dec | 28.36 113.45 203.23 210.00 215.52 202.13 210.65 CBC enc | 79.32 87.02 88.51 89.28 89.85 89.89 89.97 CBC dec | 28.29 112.20 203.30 209.82 214.99 201.51 209.95 CFB enc | 79.59 87.16 88.54 89.30 89.83 89.62 89.92 CFB dec | 28.12 111.05 202.47 209.02 214.21 210.90 209.12 CTR enc | 28.04 108.81 200.62 206.65 211.78 208.78 206.74 CTR dec | 28.02 108.82 200.45 206.62 211.78 208.74 206.70 sm4-ce-cipher ECB enc | 336.79 587.13 682.70 747.37 803.75 811.52 818.06 ECB dec | 339.18 584.52 679.72 743.68 798.82 803.83 811.54 CBC enc | 316.63 521.47 597.00 647.14 690.82 695.21 700.55 CBC dec | 291.80 503.79 585.66 640.82 689.86 695.16 701.72 CFB enc | 294.79 482.31 552.13 594.71 631.60 628.91 638.92 CFB dec | 293.09 466.44 526.56 563.17 594.41 592.26 601.97 CTR enc | 309.61 506.13 576.86 620.47 656.38 654.51 665.10 CTR dec | 306.69 505.57 576.84 620.18 657.09 654.52 665.32 sm4-ce ECB enc | 366.96 1329.81 2024.29 2755.50 3790.07 3861.91 4051.40 ECB dec | 367.30 1323.93 2018.72 2747.43 3787.39 3862.55 4052.62 CBC enc | 358.09 682.68 807.24 885.35 958.29 963.60 973.73 CBC dec | 366.51 1303.63 1978.64 2667.93 3624.53 3683.41 3856.08 CFB enc | 351.51 681.26 807.81 893.10 968.54 969.17 985.83 CFB dec | 354.98 1266.61 1929.63 2634.81 3614.23 3611.59 3841.68 CTR enc | 324.23 1121.25 1689.44 2256.70 2981.90 3007.79 3060.74 CTR dec | 324.18 1120.44 1694.31 2258.32 2982.01 3010.09 3060.99 Signed-off-by:Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Tianjia Zhang authored
This adds ARMv8 NEON implementations of SM4 in ECB, CBC, CFB and CTR modes. This implementation uses the plain NEON instruction set, All S-BOX substitutions uses the tbl/tbx instructions of ARMv8, combined with the out-of-order execution in CPU, this optimization supports encryption of up to 8 blocks at the same time. The performance of encrypting one block is not as good as software implementation, so the encryption operations of CBC and CFB still use pure software algorithms. Benchmark on T-Head Yitian-710 2.75 GHz, the data comes from the 218 mode of tcrypt. The abscissas are blocks of different lengths. The data is tabulated and the unit is Mb/s: sm4-generic | 16 64 128 256 1024 1420 4096 ECB enc | 80.05 91.42 93.66 94.77 95.69 95.77 95.86 ECB dec | 79.98 91.41 93.64 94.76 95.66 95.77 95.85 CBC enc | 78.55 86.50 88.02 88.77 89.36 89.42 89.48 CBC dec | 76.82 89.06 91.52 92.77 93.75 93.83 93.96 CFB enc | 77.64 86.13 87.62 88.42 89.08 88.83 89.18 CFB dec | 77.57 88.34 90.36 91.45 92.34 92.00 92.44 CTR enc | 77.80 88.28 90.23 91.22 92.11 91.81 92.25 CTR dec | 77.83 88.22 90.22 91.22 92.04 91.82 92.28 sm4-neon ECB enc | 28.31 112.77 203.03 209.89 215.49 202.11 210.59 ECB dec | 28.36 113.45 203.23 210.00 215.52 202.13 210.65 CBC enc | 79.32 87.02 88.51 89.28 89.85 89.89 89.97 CBC dec | 28.29 112.20 203.30 209.82 214.99 201.51 209.95 CFB enc | 79.59 87.16 88.54 89.30 89.83 89.62 89.92 CFB dec | 28.12 111.05 202.47 209.02 214.21 210.90 209.12 CTR enc | 28.04 108.81 200.62 206.65 211.78 208.78 206.74 CTR dec | 28.02 108.82 200.45 206.62 211.78 208.74 206.70 Signed-off-by: -
Tianjia Zhang authored
The subsequent patches of the series will have an implementation of SM4-ECB/CBC/CFB/CTR accelerated by the CE instruction set, which conflicts with the current module name. In order to keep the naming rules of the AES algorithm consistent, the sm4-ce algorithm is renamed to sm4-ce-cipher. In addition, the speed of sm4-ce-cipher is better than that of SM4 NEON. By the way, the priority of the algorithm is adjusted to 300, which is also to leave room for the priority of SM4 NEON. Signed-off-by:
-
Tianjia Zhang authored
Export the constant arrays fk, ck, sbox of the SM4 algorithm, and add the 'crypto_sm4_' prefix, where sbox is used in the SM4 NEON implementation for the tbl/tbx instruction to replace the S-BOX, and the fk, ck arrays are used in the SM4 CE implementation. Use the sm4ekey instruction to speed up key expansion operations. Signed-off-by:
-
Jason A. Donenfeld authored
The lib/crypto libraries live in lib because they are used by various drivers of the kernel. In contrast, the various helper functions in crypto are there because they're used exclusively by the crypto API. The SM3 and SM4 helper functions were erroniously moved into lib/crypto/ instead of crypto/, even though there are no in-kernel users outside of the crypto API of those functions. This commit moves them into crypto/. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
- 03 Apr, 2022 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
-
Stephen Boyd authored
This reverts commit 7dabfa2b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
-
- 02 Apr, 2022 2 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
-
