Pull SELinux/Smack fixes from Paul Moore:
 "Another single-patch pull request for SELinux, as well as Smack.

  This fixes some credential misuse and is explained reasonably well in
  the patch description"

* tag 'selinux-pr-20210923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux,smack: fix subjective/objective credential use mixups

Pull rseq fixes from Paolo Bonzini:
 "A fix for a bug with restartable sequences and KVM.

  KVM's handling of TIF_NOTIFY_RESUME, e.g. for task migration, clears
  the flag without informing rseq and leads to stale data in userspace's
  rseq struct"

* tag 'for-linus-rseq' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Remove __NR_userfaultfd syscall fallback
  KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs
  tools: Move x86 syscall number fallbacks to .../uapi/
  entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume()
  KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guest

Pull networking fixes from Jakub Kicinski:
 "Current release - regressions:

   - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()

  Previous releases - regressions:

   - introduce a shutdown method to mdio device drivers, and make DSA
     switch drivers compatible with masters disappearing on shutdown;
     preventing infinite reference wait

   - fix issues in mdiobus users related to ->shutdown vs ->remove

   - virtio-net: fix pages leaking when building skb in big mode

   - xen-netback: correct success/error reporting for the
     SKB-with-fraglist

   - dsa: tear down devlink port regions when tearing down the devlink
     port on error

   - nexthop: fix division by zero while replacing a resilient group

   - hns3: check queue, vf, vlan ids range before using

  Previous releases - always broken:

   - napi: fix race against netpoll causing NAPI getting stuck

   - mlx4_en: ensure link operstate is updated even if link comes up
     before netdev registration

   - bnxt_en: fix TX timeout when TX ring size is set to the smallest

   - enetc: fix illegal access when reading affinity_hint; prevent oops
     on sysfs access

   - mtk_eth_soc: avoid creating duplicate offload entries

  Misc:

   - core: correct the sock::sk_lock.owned lockdep annotations"

* tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  atlantic: Fix issue in the pm resume flow.
  net/mlx4_en: Don't allow aRFS for encapsulated packets
  net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
  net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
  nfc: st-nci: Add SPI ID matching DT compatible
  MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
  nexthop: Fix memory leaks in nexthop notification chain listeners
  mptcp: ensure tx skbs always have the MPTCP ext
  qed: rdma - don't wait for resources under hw error recovery flow
  s390/qeth: fix deadlock during failing recovery
  s390/qeth: Fix deadlock in remove_discipline
  s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
  net: dsa: realtek: register the MDIO bus under devres
  net: dsa: don't allocate the slave_mii_bus using devres
  Doc: networking: Fox a typo in ice.rst
  net: dsa: fix dsa_tree_setup error path
  net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
  net/smc: add missing error check in smc_clc_prfx_set()
  net: hns3: fix a return value error in hclge_get_reset_status()
  net: hns3: check vlan id before using it
  ...

Prior to the commit 7e1c0d6f ("memcg: switch lruvec stats to rstat")
and the commit aa48e47e ("memcg: infrastructure to flush memcg
stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus *
32) at worst and for unbounded amount of time.  The commit aa48e47e
moved the lruvec stats to rstat infrastructure and the commit
7e1c0d6f bounded the error for all the lruvec stats to (nr_cpus *
32) at worst for at most 2 seconds.  More specifically it decoupled the
number of stats and the number of cgroups from the error rate.

However this reduction in error comes with the cost of triggering the
slowpath of stats update more frequently.  Previously in the slowpath
the kernel adds the stats up the memcg tree.  After aa48e47e, the
kernel triggers the asyn lruvec stats flush through queue_work().  This
causes regression reports from 0day kernel bot [1] as well as from
phoronix test suite [2].

We tried two options to fix the regression:

 1) Increase the threshold to trigger the slowpath in lruvec stats
    update codepath from 32 to 512.

 2) Remove the slowpath from lruvec stats update codepath and instead
    flush the stats in the page refault codepath. The assumption is that
    the kernel timely flush the stats, so, the update tree would be
    small in the refault codepath to not cause the preformance impact.

Following are the results of will-it-scale/page_fault[1|2|3] benchmark
on four settings i.e.  (1) 5.15-rc1 as baseline (2) 5.15-rc1 with
aa48e47e and 7e1c0d6f reverted (3) 5.15-rc1 with option-1
(4) 5.15-rc1 with option-2.

  test       (1)      (2)               (3)               (4)
  pg_f1   368563   406277 (10.23%)   399693  (8.44%)   416398 (12.97%)
  pg_f2   338399   372133  (9.96%)   369180  (9.09%)   381024 (12.59%)
  pg_f3   500853   575399 (14.88%)   570388 (13.88%)   576083 (15.02%)

From the above result, it seems like the option-2 not only solves the
regression but also improves the performance for at least these
benchmarks.

Feng Tang (intel) ran the aim7 benchmark with these two options and
confirms that option-1 reduces the regression but option-2 removes the
regression.

Michael Larabel (phoronix) ran multiple benchmarks with these options
and reported the results at [3] and it shows for most benchmarks
option-2 removes the regression introduced by the commit aa48e47e
("memcg: infrastructure to flush memcg stats").

Based on the experiment results, this patch proposed the option-2 as the
solution to resolve the regression.

Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1]
Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2]
Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3]
Fixes: aa48e47e ("memcg: infrastructure to flush memcg stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>,
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jann Horn reported a problem with commit eb1231f7 ("selinux:
clarify task subjective and objective credentials") where some LSM
hooks were attempting to access the subjective credentials of a task
other than the current task.  Generally speaking, it is not safe to
access another task's subjective credentials and doing so can cause
a number of problems.

Further, while looking into the problem, I realized that Smack was
suffering from a similar problem brought about by a similar commit
1fb057dc ("smack: differentiate between subjective and objective
task credentials").

This patch addresses this problem by restoring the use of the task's
objective credentials in those cases where the task is other than the
current executing task.  Not only does this resolve the problem
reported by Jann, it is arguably the correct thing to do in these
cases.

Cc: stable@vger.kernel.org
Fixes: eb1231f7 ("selinux: clarify task subjective and objective credentials")
Fixes: 1fb057dc ("smack: differentiate between subjective and objective task credentials")
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

After fixing hibernation resume flow, another usecase was found which
should be explicitly handled - resume when device is in "down" state.
Invoke aq_nic_init jointly with aq_nic_start only if ndev was already
up during suspend/hibernate. We still need to perform nic_deinit() if
caller requests for it, to handle the freeze/resume scenarios.

Fixes: 57f780f1 ("atlantic: Fix driver resume flow.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit made the fatally incorrect assumption that ports which
aren't in the FORWARDING STP state should not have packets forwarded
towards them, and that is all that needs to be done.

However, that logic alone permits BLOCKING ports to forward to
FORWARDING ports, which of course allows packet storms to occur when
there is an L2 loop.

The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge
do for you", but "what can you do for the bridge". This way, only
FORWARDING ports forward to the other FORWARDING ports from the same
bridging domain, and we are still compatible with the idea of multiple
bridges.

Fixes: df291e54 ("net: ocelot: support multiple bridges")
Suggested-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sometimes multiple CLS_REPLACE calls are issued for the same connection.
rhashtable_insert_fast does not check for these duplicates, so multiple
hardware flow entries can be created.
Fix this by checking for an existing entry early

Fixes: 502e84e2 ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding the part name used in
the compatible to the list of SPI IDs.

Fixes: 96c8395e ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove myself as net/smc maintainer, as I am
leaving IBM soon and can not maintain net/smc anymore.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller discovered memory leaks [1] that can be reduced to the
following commands:

 # ip nexthop add id 1 blackhole
 # devlink dev reload pci/0000:06:00.0

As part of the reload flow, mlxsw will unregister its netdevs and then
unregister from the nexthop notification chain. Before unregistering
from the notification chain, mlxsw will receive delete notifications for
nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw
will not receive notifications for nexthops using netdevs that are not
dismantled as part of the reload flow. For example, the blackhole
nexthop above that internally uses the loopback netdev as its nexthop
device.

One way to fix this problem is to have listeners flush their nexthop
tables after unregistering from the notification chain. This is
error-prone as evident by this patch and also not symmetric with the
registration path where a listener receives a dump of all the existing
nexthops.

Therefore, fix this problem by replaying delete notifications for the
listener being unregistered. This is symmetric to the registration path
and also consistent with the netdev notification chain.

The above means that unregister_nexthop_notifier(), like
register_nexthop_notifier(), will have to take RTNL in order to iterate
over the existing nexthops and that any callers of the function cannot
hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN
driver. To avoid a deadlock, change the latter to unregister its nexthop
listener without holding RTNL, making it symmetric to the registration
path.

[1]
unreferenced object 0xffff88806173d600 (size 512):
  comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s)
  hex dump (first 32 bytes):
    41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff  A..`......sa....
    08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00  ..sa............
  backtrace:
    [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522
    [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline]
    [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline]
    [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231
    [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239
    [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83
    [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline]
    [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306
    [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244
    [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline]
    [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline]
    [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913
    [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572
    [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504
    [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590
    [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
    [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340
    [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929
    [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline]
    [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline]
    [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409
    [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463
    [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492
    [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline]
    [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline]
    [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499

Fixes: 2a014b20 ("mlxsw: spectrum_router: Add support for nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f8ade8dd ("xsurf100: drop include of lib8390.c") accidentally
changed init/main.c.  Revert that part.

Fixes: f8ade8dd ("xsurf100: drop include of lib8390.c")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Juergen, Roger, and Stefano.

Thank you!
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Christoph Hellwig.

Thank you!
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ley Foon has left Intel and will no longer be able to maintain NIOS2.
Update the MAINTAINER's entry to Dinh Nguyen.
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi modalias fix from Mark Brown:
 "Fix modalias issues

  As reported by Russell King the change to use OF style modaliases for
  DT enumerated broke at least the spi-nor driver, the patch here
  reverts that change to fix the regression.

  Sadly this will mean that anything that started loading since the
  change to OF modaliases will run into issues, there doesn't seem to be
  any approach which doesn't cause some problems and thi seems like the
  least bad approach - gory details are in the commit log for the
  change.

  I'm currently working through the SPI drivers to add ID tables and
  missing IDs to tables which should address things from the other end,
  this seems more straightforward and robust than any other options"

* tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Revert modalias changes

Pull nfsd fixes from Chuck Lever:
 "Critical bug fixes:

   - Fix crash in NLM TEST procedure

   - NFSv4.1+ backchannel not restored after PATH_DOWN"

* tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN
  NLM: Fix svcxdr_encode_owner()

Merge tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "The first round of bug-fixes for platform-drivers-x86 for 5.15,
  highlights:

   - amd-pmc fix for some suspend/resume issues

   - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting

   - some build error/warning fixes

   - various DMI quirk additions"

* tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX
  platform/x86/intel: hid: Add DMI switches allow list
  platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error
  platform/x86: amd-pmc: Increase the response register timeout
  platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet
  platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet
  lg-laptop: Correctly handle dmi_get_system_info() returning NULL
  platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

linux@prisktech.co.nz is defunct:

  4.1.2 <linux@prisktech.co.nz>: Recipient address rejected: Domain not found

Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert the __NR_userfaultfd syscall fallback added for KVM selftests now
that x86's unistd_{32,63}.h overrides are under uapi/ and thus not in
KVM selftests' search path, i.e. now that KVM gets x86 syscall numbers
from the installed kernel headers.

No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a test to verify an rseq's CPU ID is updated correctly if the task is
migrated while the kernel is handling KVM_RUN.  This is a regression test
for a bug introduced by commit 72c3c0fe ("x86/kvm: Use generic xfer
to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM
without updating rseq, leading to a stale CPU ID and other badness.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Message-Id: <20210901203030.1292304-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move unistd_{32,64}.h from x86/include/asm to x86/include/uapi/asm so
that tools/selftests that install kernel headers, e.g. KVM selftests, can
include non-uapi tools headers, e.g. to get 'struct list_head', without
effectively overriding the installed non-tool uapi headers.

Swapping KVM's search order, e.g. to search the kernel headers before
tool headers, is not a viable option as doing results in linux/type.h and
other core headers getting pulled from the kernel headers, which do not
have the kernel-internal typedefs that are used through tools, including
many files outside of selftests/kvm's control.

Prior to commit cec07f53 ("perf tools: Move syscall number fallbacks
from perf-sys.h to tools/arch/x86/include/asm/"), the handcoded numbers
were actual fallbacks, i.e. overriding unistd_{32,64}.h from the kernel
headers was unintentional.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq.  The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.

Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing.  But, that's been true since commit a42c6ded
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012.  Punt cleaning that
mess up to future patches.

No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to
transferring to a KVM guest, which is roughly equivalent to an exit to
userspace and processes many of the same pending actions.  While the task
cannot be in an rseq critical section as the KVM path is reachable only
by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a
critical section still apply, e.g. the current CPU needs to be updated if
the task is migrated.

Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults
and other badness in userspace VMMs that use rseq in combination with KVM,
e.g. due to the CPU ID being stale after task migration.

Fixes: 72c3c0fe ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Peter Foley <pefoley@google.com>
Bisected-by: Doug Evans <dje@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Due to signed/unsigned comparison, the expression:

	info->size_goal - skb->len > 0

evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.

Due to the above, syzbot is able to trigger the following WARN_ON():

WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216
RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000
RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003
RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280
R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0
FS:  00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
 release_sock+0xb4/0x1b0 net/core/sock.c:3206
 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
 call_write_iter include/linux/fs.h:2163 [inline]
 new_sync_write+0x40b/0x640 fs/read_write.c:507
 vfs_write+0x7cf/0xae0 fs/read_write.c:594
 ksys_write+0x1ee/0x250 fs/read_write.c:647
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9
RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038
R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000

Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.

Additionally, ensure that the skb in the tx cache always carries
the relevant extension.

Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com
Fixes: 1094c6fe ("mptcp: fix possible divide by zero")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.

Fixes: 64515dc8 ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-09-21

This brings two fixes for deadlocks when a device is removed while it
has certain types of async work pending. And one additional fix for a
missing NULL check in an error case.
====================

Link: https://lore.kernel.org/r/20210921145217.1584654-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 0b9902c1 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.

Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.

Fixes: b41b554c ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit b41b554c
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.

STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit 0b9902c1 ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.

So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.

As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.

Fixes: b41b554c ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().

qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).

Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.

Fix it by checking the pointer for NULL before accessing it.

Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.

Fixes: eff73e16 ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed.  Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table.  The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.

spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors.  Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too.  To make matters worse up until
8ff16cf7 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all.  The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).

I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.

Instead revert the relevant changes for now:

e09f2ab8 ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e2 ("spi: add of_device_uevent_modalias support")

This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression.  Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options.  I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.

Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.

Fixes: e09f2ab8 ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes: 3ce6c9e2 ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>

Pull s390 eBPF fixes from Vasily Gorbik:
 "Johan Almbladh has implemented a number of new testcases for eBPF [1],
  which uncovered three miscompilation issues in the s390 eBPF JIT"

Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/ [1]

* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/bpf: Fix optimizing out zero-extensions
  s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
  s390/bpf: Fix branch shortening during codegen pass

In commit b7213ffa ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tested with a AMD Ryzen 7 5800X.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.deSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Some devices, even non convertible ones, can send incorrect
SW_TABLET_MODE reports.

Add an allow list and accept such reports only from devices in it.

Bug reported for Dell XPS 17 9710 on:
https://gitlab.freedesktop.org/libinput/libinput/-/issues/662Reported-by: Tobias Gurtzick <magic@wizardtales.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Tobias Gurtzick <magic@wizardtales.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com
[hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there
is a linker error since the LEDS trigger code is built as a loadable
module. This happens because DELL_WMI_PRIVACY is a bool that depends
on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous.

ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get'

Fixes: 8af9fa37 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.orgReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Vladimir Oltean says:

====================
Fix mdiobus users with devres

Commit ac3a68d5 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski has introduced two
classes of potential bugs by making the devres callback of
devm_mdiobus_alloc stop calling mdiobus_unregister.

The exact buggy circumstances are presented in the individual commit
messages. I have searched the tree for other occurrences, but at the
moment:

- for issue (a) I have no concrete proof that other buses except SPI and
  I2C suffer from it, and the only SPI or I2C device drivers that call
  of_mdiobus_alloc are the DSA drivers that leave a NULL
  ds->slave_mii_bus and a non-NULL ds->ops->phy_read, aka ksz9477,
  ksz8795, lan9303_i2c, vsc73xx-spi.

- for issue (b), all drivers which call of_mdiobus_alloc either use
  of_mdiobus_register too, or call mdiobus_unregister sometime within
  the ->remove path.

Although at this point I've seen enough strangeness caused by this
"device_del during ->shutdown" that I'm just going to copy the SPI and
I2C subsystem maintainers to this patch series, to get their feedback
whether they've had reports about things like this before. I don't think
other buses behave in this way, it forces SPI and I2C devices to have to
protect themselves from a really strange set of issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
	/* For compatibility with error handling in drivers. */
	if (bus->state == MDIOBUS_ALLOCATED) {
		kfree(bus);
		return;
	}

	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
	bus->state = MDIOBUS_RELEASED;

	put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, the Realtek drivers fall under category (b). To solve it,
we can register the MDIO bus under devres too, which restores the
previous behavior.

Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
	/* For compatibility with error handling in drivers. */
	if (bus->state == MDIOBUS_ALLOCATED) {
		kfree(bus);
		return;
	}

	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
	bus->state = MDIOBUS_RELEASED;

	put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, DSA falls into category (a), it tries to be helpful and
registers an MDIO bus on behalf of the switch, which might be on such a
bus. I've no idea why it does it under devres.

It does this on probe:

	if (!ds->slave_mii_bus && ds->ops->phy_read)
		alloc and register mdio bus

and this on remove:

	if (ds->slave_mii_bus && ds->ops->phy_read)
		unregister mdio bus

I _could_ imagine using devres because the condition used on remove is
different than the condition used on probe. So strictly speaking, DSA
cannot determine whether the ds->slave_mii_bus it sees on remove is the
ds->slave_mii_bus that _it_ has allocated on probe. Using devres would
have solved that problem. But nonetheless, the existing code already
proceeds to unregister the MDIO bus, even though it might be
unregistering an MDIO bus it has never registered. So I can only guess
that no driver that implements ds->ops->phy_read also allocates and
registers ds->slave_mii_bus itself.

So in that case, if unregistering is fine, freeing must be fine too.

Stop using devres and free the MDIO bus manually. This will make devres
stop attempting to free a still registered MDIO bus on ->shutdown.

Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>