- 12 Dec, 2013 4 commits
-
-
Alex Deucher authored
Some RS690 boards with 64MB of sideport memory show up as having 128MB sideport + 256MB of UMA. In this case, just skip the sideport memory and use UMA. This fixes rendering corruption and should improve performance. bug: https://bugs.freedesktop.org/show_bug.cgi?id=35457Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie authored
These four patches fix a few issues discovered since the initial merge, which have been reviewed by Rob Clark and Thierry Reding. * 'drm-tda998x-3.12-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: DRM: Armada: prime refcounting bug fix DRM: Armada: fix printing of phys_addr_t/dma_addr_t DRM: Armada: destroy framebuffer after helper DRM: Armada: implement lastclose() for fbhelper
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2013-12-11' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a bunch of regression fixes plus a few patches for long-standing issues in gem corner-cases that we've hunted down in the past weeks. Since apparently people hit those in the wild (and we also have nice igts for them) I've opted for -fixes and cc: stable. There's 1-2 things oustanding on top of this where I'm still waiting on confirmation from testing, but nothing really scary. * tag 'drm-intel-fixes-2013-12-11' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: don't update the dri1 breadcrumb with modesetting drm/i915: Repeat eviction search after idling the GPU drm/i915: Fix use-after-free in do_switch drm/i915: fix pm init ordering drm/i915: Hold mutex across i915_gem_release drm/i915: Skip clock checks on BDW drm/i915: Do not clobber config status after a forced restore of hw state drm/i915: Take modeset locks around intel_modeset_setup_hw_state()
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
As promised bdw fixes come separate for now. Just a few minior things. * 'bdw-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915/bdw: PIPE_[BC] I[ME]R moved to powerwell drm/i915/bdw: Limit GTT to 2GB drm/i915/bdw: Add comment about gen8 HWS PGA drm/i915/bdw: Free correct number of ppgtt pages drm/i915/bdw: Do gen6 style reset for gen8 drm/i915/bdw: GEN8 backlight support drm/i915/bdw: Add BDW to ULT macro
-
- 11 Dec, 2013 1 commit
-
-
Daniel Vetter authored
The update is horribly racy since it doesn't protect at all against concurrent closing of the master fd. And it can't really since that requires us to grab a mutex. Instead of jumping through hoops and offloading this to a worker thread just block this bit of code for the modesetting driver. Note that the race is fairly easy to hit since we call the breadcrumb function for any interrupt. So the vblank interrupt (which usually keeps going for a bit) is enough. But even if we'd block this and only update the breadcrumb for user interrupts from the CS we could hit this race with kms/gem userspace: If a non-master is waiting somewhere (and hence has interrupts enabled) and the master closes its fd (probably due to crashing). v2: Add a code comment to explain why fixing this for real isn't really worth it. Also improve the commit message a bit. v3: Fix the spelling in the comment. Reported-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Cc: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Cc: stable@vger.kernel.org Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 10 Dec, 2013 26 commits
-
-
Russell King authored
Commit 011c2282 changed the way refcounting on imported dma_bufs works, and this hadn't been spotted while forward-porting Armada. Reflect the changes in that commit into the Armada driver. Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
These can be 64-bit quantities, so fix them up appropriately. Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Destroy the framebuffer only after the helper, since the helper may still be referencing the framebufer at this point. Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Call drm_fb_helper_restore_fbdev_mode() upon last close so that in the event of the X server crashing, we have some kind of mode restored. Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: "Drop the unnecessary miscdevice.h includes that we forgot in commit 487722cf ("watchdog: Get rid of MODULE_ALIAS_MISCDEV statements") and fix an oops for the sc1200_wdt driver" * git://www.linux-watchdog.org/linux-watchdog: sc1200_wdt: Fix oops watchdog: Drop unnecessary include of miscdevice.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds authored
Pull AVR32 fixes from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: favr-32: clk_round_rate() can return a zero upon error avr32: remove deprecated IRQF_DISABLED cpufreq_ at32ap-cpufreq.c: Fix section mismatch avr32: pm: Fix section mismatch avr32: Kill CONFIG_MTD_PARTITIONS
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "One patch to increase the number of possible CPUs to 256, with the latest machine a single LPAR can have up to 101 CPUs. Plus a number of bug fixes, the clock_gettime patch fixes a regression added in the 3.13 merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/time,vdso: fix clock_gettime for CLOCK_MONOTONIC s390/vdso: ectg gettime support for CLOCK_THREAD_CPUTIME_ID s390/vdso: fix access-list entry initialization s390: increase CONFIG_NR_CPUS limit s390/smp,sclp: fix size of sclp_cpu_info structure s390/sclp: replace uninitialized early_event_mask_sccb variable with sccb_early s390/dasd: fix memory leak caused by dangling references to request_queue
-
Alan authored
If loaded with isapnp = 0 the driver explodes. This is catching people out now and then. What should happen in the working case is a complete mystery and the code appears terminally confused, but we can at least make the error path work properly. Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991
-
Guenter Roeck authored
After commit 487722cf (watchdog: Get rid of MODULE_ALIAS_MISCDEV statements) the affected drivers no longer need to include miscdevice.h. Only exception is rt2880_wdt.c which never needed it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Paul Walmsley authored
Treat both negative and zero return values from clk_round_rate() as errors. This is needed since subsequent patches will convert clk_round_rate()'s return value to be an unsigned type, rather than a signed type, since some clock sources can generate rates higher than (2^31)-1 Hz. Eventually, when calling clk_round_rate(), only a return value of zero will be considered a error. All other values will be considered valid rates. The comparison against values less than 0 is kept to preserve the correct behavior in the meantime. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Håvard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
-
Matthias Brugger authored
The function at32_cpufreq_driver_init was marked as __init but will be called from inside the cpufreq framework. This lead to the following a section mismatch during compilation: WARNING: drivers/built-in.o(.data+0x2448): Section mismatch in reference from the variable at32_driver to the function .init.text:at32_cpufreq_driver_init() The variable at32_driver references the function __init at32_cpufreq_driver_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Matthias Brugger authored
The power management has a section mismatch which leads to the following warning during compilation: WARNING: arch/avr32/mach-at32ap/built-in.o(.text+0x16d4): Section mismatch in reference from the function avr32_pm_offset() to the function .init.text:pm_exception() The function avr32_pm_offset() references the function __init pm_exception(). Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
-
Eunbong Song authored
This patch removes CONFIG_MTD_PARTITIONS in config files for avr32. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b2. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
-
Chris Wilson authored
With the advent of hw context support, we gained some objects that are pinned for the duration of their request. That is we can make aperture space available by idling the GPU and in the process performing a context switch back to the always-pinned default context. As such, we should not conclude that there is no space in the aperture for the current object until we have unpinned any such context objects. Note that we also have the problem of outstanding pageflips preventing eviction of their framebuffer objects to resolve. Testcase: igt/gem_ctx_exec/eviction Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72507Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: lu hua <huax.lu@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here are a handful of powerpc fixes for 3.13. The patches are reasonably trivial and self contained. Note the offb patches outside of arch/powerpc, they are LE fixes for our open-firmware 'dumb' framebuffer" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix up the kdump base cap to 128M powernv: Fix VFIO support with PHB3 powerpc/52xx: Re-enable bestcomm driver in defconfigs powerpc/pasemi: Turn on devtmpfs in defconfig offb: Add palette hack for little endian offb: Little endian fixes powerpc: Fix PTE page address mismatch in pgtable ctor/dtor powerpc/44x: Fix ocm_block allocation powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node
-
Mahesh Salgaonkar authored
The current logic sets the kdump base to min of 2G or ppc64_rma_size/2. On PowerNV kernel the first memory block 'memory@0' can be very large, equal to the DIMM size with ppc64_rma_size value capped to 1G. Hence on PowerNV, kdump base is set to 512M resulting kdump to fail while allocating paca array. This is because, paca need its memory from RMA region capped at 256M (see allocate_pacas()). This patch lowers the kdump base cap to 128M so that kdump kernel can successfully get memory below 256M for paca allocation. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Thadeu Lima de Souza Cascardo authored
I have recently found out that no iommu_groups could be found under /sys/ on a P8. That prevents PCI passthrough from working. During my investigation, I found out there seems to be a missing iommu_register_group for PHB3. The following patch seems to fix the problem. After applying it, I see iommu_groups under /sys/kernel/iommu_groups/, and can also bind vfio-pci to an adapter, which gives me a device at /dev/vfio/. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anatolij Gustschin authored
The bestcomm driver has been moved to drivers/dma, so to select this driver by default additionally CONFIG_DMADEVICES has to be enabled. Currently it is not enabled in the config despite existing CONFIG_PPC_BESTCOMM=y in the config files. Fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Olof Johansson authored
At least some distros expect it these days; turn it on. Also, random churn from doing a savedefconfig for the first time in a year or so. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Cedric Le Goater authored
The pseudo palette color entries need to be ajusted for little endian. This patch byteswaps the values in the pseudo palette depending on the host endian order and the screen depth. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Cedric Le Goater authored
The "screen" properties : depth, width, height, linebytes need to be converted to the host endian order when read from the device tree. The offb_init_palette_hacks() routine also made assumption on the host endian order. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Hong H. Pham authored
In pte_alloc_one(), pgtable_page_ctor() is passed an address that has not been converted by page_address() to the newly allocated PTE page. When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor() with an address to the PTE page that has been converted by page_address(). The mismatch in the PTE's page address causes pgtable_page_dtor() to access invalid memory, so resources for that PTE (such as the page lock) is not properly cleaned up. On PPC32, only SMP kernels are affected. On PPC64, only SMP kernels with 4K page size are affected. This bug was introduced by commit d614bb04 "powerpc: Move the pte free routines from common header". On a preempt-rt kernel, a spinlock is dynamically allocated for each PTE in pgtable_page_ctor(). When the PTE is freed, calling pgtable_page_dtor() with a mismatched page address causes a memory leak, as the pointer to the PTE's spinlock is bogus. On mainline, there isn't any immediately obvious symptoms, but the problem still exists here. Fixes: d614bb04 "powerpc: Move the pte free routes from common header" Cc: Paul Mackerras <paulus@samba.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-stable <stable@vger.kernel.org> # v3.10+ Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Ilia Mirkin authored
Allocate enough memory for the ocm_block structure, not just a pointer to it. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and PPC_MAPLE=n will fail to link: btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off' btext.c:(.text+0x2d214): undefined reference to `.rmci_on' Fix it by making the build of rmci_on/off() depend on PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Anatolij Gustschin says: << Please pull a device tree fix for v3.13. The booting on mpc512x is broken since v3.13-rc1, this patch repairs it. >>
-
- 09 Dec, 2013 9 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is probably a bit big, but just because I fell behind last week and didn't get to doing any pulls, so stuff backed up behind me, I actually should have sent this for -rc3 but failed to even manage that. So this has radeon, intel, nouveau, vmware, exynos and tegra fixes in it, and the line count isn't all the bad in the end" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (50 commits) drm: fix the addition of the side-by-side (half) flag for extra 3D modes drm/edid: fix length check when adding extra 3D modes drm/radeon/atom: fix bus probes when hw_i2c is set (v2) drm/radeon: fix null pointer dereference in dce6+ audio code drm/radeon: fixup bad vram size on SI udl: fix issue with imported prime buffers drm/vmwgfx: Add our connectors to sysfs drm/vmwgfx: Fix dma buffer memory size accounting drm/vmwgfx: Fix up and comment the dumb buffer implementation drm/vmwgfx: Correctly set the enabled state on crtcs drm/nv50/disp: min/max are reversed in nv50_crtc_gamma_set() drm/nouveau/sw: fix oops if gpu has its display block disabled drm/nouveau: unreference fence after syncing drm/nouveau/kms: send timestamp data for correct head in flip completion events drm/nouveau/clk: Add support for NVAA/NVAC drm/nouveau/fifo: Hook up pause and resume for NV50 and NV84+ drm/nv10/plane: some chipsets don't support NV12 drm/nv10/plane: add downscaling restrictions drm/nv10/plane: fix format computation drm/nv04-nv30/clk: provide an empty domain list ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixesLinus Torvalds authored
Pull mfd fixes from Samuel Ortiz: "This is the first 3.13 pull request for MFD fixes. We have: - A ti-ssp build failure fix - An as3722 build failure fix - An lpc_ich copy paste error fix" * tag 'mfd-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: lpc_ich: Fix Wildcat Point info name field mfd: ti-ssp: Fix build mfd: Make MFD_AS3722 depend on I2C=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixup from Rafael Wysocki: "This reverts two cpufreq commits that fixed issues for some people, but broke things for others, so revert them and we'll need to fix the original problems differently" * tag 'pm-3.13-rc3-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpufreq: fix garbage kobjects on errors during suspend/resume" Revert "cpufreq: suspend governors on system suspend/hibernate"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "An update to ALPS to support devices on Dell XT2 (hopefully working better this time around and although it is largish it should not affect any other ALPS devices) and a tiny update to Elantech driver to support newer devices as well. Also a coupe of new input event codes have been defined" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - add support for DualPoint device on Dell XT2 model Input: elantech - add support for newer (August 2013) devices Input: add SW_MUTE_DEVICE switch definition Input: usbtouchscreen - separate report and transmit buffer size handling Input: sur40 - suppress false uninitialized variable warning Input: add key code for ambient light sensor button Input: keyboard - "keycode & KEY_MAX" changes some keycode values
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Unfortunately the last push that fixed a crash in the crypto scatterwalk code introduced a new crash when SG debugging is enabled. This fixes that" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: scatterwalk - Use sg_chain_ptr on chain entries
-
Tom Lendacky authored
Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is enabled. Use sg_chain_ptr instead of sg_page on a chain entry. Cc: stable@vger.kernel.org Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fix from Greg KH: "Here is a single n_tty fix for 3.13-rc3 that resolves a regression in 3.12 that has been reported" * tag 'tty-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: Fix missing newline echo
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some bugfixes for the staging and IIO drivers for 3.13-rc3. The resolve the vm memory issue in the tidspbridge driver, fix a much-reported build failure in an ARM driver, and some other IIO bugfixes that have been reported" * tag 'staging-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: TIDSPBRIDGE: Use vm_iomap_memory for mmap-ing instead of remap_pfn_range Fix build failure for gp2ap020a00f.c iio: hid-sensors: Fix power and report state HID: hid-sensor-hub: Add logical min and max
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Nothing huge, just a few small bugfixes for problems reported, and a device id update" * tag 'char-misc-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: add 9 series PCH mei device ids drivers/char/i8k.c: add Dell XPLS L421X MAINTAINERS: add HSI subsystem misc: mic: Suppress memory space sparse warnings misc: mic: Fix endianness issues. misc: mic: Fix user space namespace pollution from mic_common.h. misc: mic: Bug fix for sysfs poll usage. misc: mic: Minor bug fix in 'retry' loops. misc: mic: Change mic_notify(...) to return true. extcon: remove freed groups caused the panic or warning in unregister flow extcon: arizona: Get pdata from arizona structure not device
-