- 29 Apr, 2021 26 commits
-
-
Yang Li authored
Variable 'err' is set to -EIO but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiapeng Chong authored
Variable queue is set to bp->queues but these values is not used as it is overwritten later on, hence redundant assignment can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Michael Walle authored
His email bounces with permanent error "550 Invalid recipient". His last email was from 2020-09-09 on the LKML and he seems to have left TI. Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
Michael Walle authored
His email bounces with permanent error "550 Invalid recipient". His last email on the LKML was from 2015-10-22 on the LKML. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: -
Jian Shen authored
In some cases, the device is not initialized because reset failed. If another task calls hns3_reset_notify_up_enet() before reset retry, it will cause an error since uninitialized pointer access. So add check for HNS3_NIC_STATE_INITED before calling hns3_nic_net_open() in hns3_reset_notify_up_enet(). Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yufeng Mo authored
The message sent to VF should be initialized, otherwise random value of some contents may cause improper processing by the target. So add a initialization to message in hclge_get_link_mode(). Fixes: 9194d18b ("net: hns3: fix the problem that the supported port is empty") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
According to the UM, the type and enable status of igu_egu_hw_err should be configured separately. Currently, the type field is incorrect when disable this error. So fix it by configuring these two fields separately. Fixes: bf1faf94 ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI") Signed-off-by:
-
Yang Li authored
Variable 'err' is set to -ENOMEM but this value is never read as it is overwritten with a new value later on, hence the 'If statements' and assignments are redundantand and can be removed. Cleans up the following clang-analyzer warning: net/ipv6/seg6.c:126:4: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
-
Zhang Zhengming authored
There is a crash in the function br_get_link_af_size_filtered, as the port_exists(dev) is true and the rx_handler_data of dev is NULL. But the rx_handler_data of dev is correct saved in vmcore. The oops looks something like: ... pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge] ... Call trace: br_get_link_af_size_filtered+0x28/0x1c8 [bridge] if_nlmsg_size+0x180/0x1b0 rtnl_calcit.isra.12+0xf8/0x148 rtnetlink_rcv_msg+0x334/0x370 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x1f0/0x250 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 __sys_sendto+0x120/0x150 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc In br_add_if(), we found there is no guarantee that assigning rx_handler_data to dev->rx_handler_data will before setting the IFF_BRIDGE_PORT bit of priv_flags. So there is a possible data competition: CPU 0: CPU 1: (RCU read lock) (RTNL lock) rtnl_calcit() br_add_slave() if_nlmsg_size() br_add_if() br_get_link_af_size_filtered() -> netdev_rx_handler_register ... // The order is not guaranteed ... -> dev->priv_flags |= IFF_BRIDGE_PORT; // The IFF_BRIDGE_PORT bit of priv_flags has been set -> if (br_port_exists(dev)) { // The dev->rx_handler_data has NOT been assigned -> p = br_port_get_rcu(dev); .... -> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data); ... Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value. Signed-off-by:Zhang Zhengming <zhangzhengming@huawei.com> Reviewed-by:
Zhao Lei <zhaolei69@huawei.com> Reviewed-by:
Wang Xiaogang <wangxiaogang3@huawei.com> Suggested-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
David S. Miller authored
Davide Caratti says: ==================== fix stack OOB read while fragmenting IPv4 packets - patch 1/2 fixes openvswitch IPv4 fragmentation, that does a stack OOB read after commit d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt") - patch 2/2 fixes the same issue in TC 'sch_frag' code ==================== Signed-off-by:
-
Davide Caratti authored
when 'act_mirred' tries to fragment IPv4 packets that had been previously re-assembled using 'act_ct', splats like the following can be observed on kernels built with KASAN: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888147009574 by task ping/947 CPU: 0 PID: 947 Comm: ping Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: <IRQ> dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 sch_fragment+0x4bf/0xe40 tcf_mirred_act+0xc3d/0x11a0 [act_mirred] tcf_action_exec+0x104/0x3e0 fl_classify+0x49a/0x5e0 [cls_flower] tcf_classify_ingress+0x18a/0x820 __netif_receive_skb_core+0xae7/0x3340 __netif_receive_skb_one_core+0xb6/0x1b0 process_backlog+0x1ef/0x6c0 __napi_poll+0xaa/0x500 net_rx_action+0x702/0xac0 __do_softirq+0x1e4/0x97f do_softirq+0x71/0x90 </IRQ> __local_bh_enable_ip+0xdb/0xf0 ip_finish_output2+0x760/0x2120 ip_do_fragment+0x15a5/0x1f60 __ip_finish_output+0x4c2/0xea0 ip_output+0x1ca/0x4d0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1c4b/0x2d00 sock_sendmsg+0xdb/0x110 __sys_sendto+0x1d7/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f82e13853eb Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89 RSP: 002b:00007ffe01fad888 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005571aac13700 RCX: 00007f82e13853eb RDX: 0000000000002330 RSI: 00005571aac13700 RDI: 0000000000000003 RBP: 0000000000002330 R08: 00005571aac10500 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe01faefb0 R13: 00007ffe01fad890 R14: 00007ffe01fad980 R15: 00005571aac0f0a0 The buggy address belongs to the page: page:000000001dff2e03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147009 flags: 0x17ffffc0001000(reserved) raw: 0017ffffc0001000 ffffea00051c0248 ffffea00051c0248 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888147009400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009480: f1 f1 f1 f1 04 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 >ffff888147009500: 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 f2 f2 ^ ffff888147009580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888147009600: 00 00 00 00 00 00 00 00 00 00 00 00 00 f2 f2 f2 for IPv4 packets, sch_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in sch_fragment(), similarly to what is done for IPv6 few lines below. Fixes: c129412f ("net/sched: sch_frag: add generic packet fragment support.") Cc: <stable@vger.kernel.org> # 5.11 Reported-by:Shuang Li <shuali@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
running openvswitch on kernels built with KASAN, it's possible to see the following splat while testing fragmentation of IPv4 packets: BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60 Read of size 1 at addr ffff888112fc713c by task handler2/1367 CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x92/0xc1 print_address_description.constprop.7+0x1a/0x150 kasan_report.cold.13+0x7f/0x111 ip_do_fragment+0x1b03/0x1f60 ovs_fragment+0x5bf/0x840 [openvswitch] do_execute_actions+0x1bd5/0x2400 [openvswitch] ovs_execute_actions+0xc8/0x3d0 [openvswitch] ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch] genl_family_rcv_msg_doit.isra.15+0x227/0x2d0 genl_rcv_msg+0x287/0x490 netlink_rcv_skb+0x120/0x380 genl_rcv+0x24/0x40 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f957079db07 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07 RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019 RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0 The buggy address belongs to the page: page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame: ovs_fragment+0x0/0x840 [openvswitch] this frame has 2 objects: [32, 144) 'ovs_dst' [192, 424) 'ovs_rt' Memory state around the buggy address: ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00 >ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 ^ ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then, in the following call graph: ip_do_fragment() ip_skb_dst_mtu() ip_dst_mtu_maybe_forward() ip_mtu_locked() the pointer to struct dst_entry is used as pointer to struct rtable: this turns the access to struct members like rt_mtu_locked into an OOB read in the stack. Fix this changing the temporary variable used for IPv4 packets in ovs_fragment(), similarly to what is done for IPv6 few lines below. Fixes: d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt") Cc: <stable@vger.kernel.org> Acked-by:Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
-
Andrea Mayer authored
This patch provides counters for SRv6 Behaviors as defined in [1], section 6. For each SRv6 Behavior instance, counters defined in [1] are: - the total number of packets that have been correctly processed; - the total amount of traffic in bytes of all packets that have been correctly processed; In addition, this patch introduces a new counter that counts the number of packets that have NOT been properly processed (i.e. errors) by an SRv6 Behavior instance. Counters are not only interesting for network monitoring purposes (i.e. counting the number of packets processed by a given behavior) but they also provide a simple tool for checking whether a behavior instance is working as we expect or not. Counters can be useful for troubleshooting misconfigured SRv6 networks. Indeed, an SRv6 Behavior can silently drop packets for very different reasons (i.e. wrong SID configuration, interfaces set with SID addresses, etc) without any notification/message to the user. Due to the nature of SRv6 networks, diagnostic tools such as ping and traceroute may be ineffective: paths used for reaching a given router can be totally different from the ones followed by probe packets. In addition, paths are often asymmetrical and this makes it even more difficult to keep up with the journey of the packets and to understand which behaviors are actually processing our traffic. When counters are enabled on an SRv6 Behavior instance, it is possible to verify if packets are actually processed by such behavior and what is the outcome of the processing. Therefore, the counters for SRv6 Behaviors offer an non-invasive observability point which can be leveraged for both traffic monitoring and troubleshooting purposes. [1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters Troubleshooting using SRv6 Behavior counters -------------------------------------------- Let's make a brief example to see how helpful counters can be for SRv6 networks. Let's consider a node where an SRv6 End Behavior receives an SRv6 packet whose Segment Left (SL) is equal to 0. In this case, the End Behavior (which accepts only packets with SL >= 1) discards the packet and increases the error counter. This information can be leveraged by the network operator for troubleshooting. Indeed, the error counter is telling the user that the packet: (i) arrived at the node; (ii) the packet has been taken into account by the SRv6 End behavior; (iii) but an error has occurred during the processing. The error (iii) could be caused by different reasons, such as wrong route settings on the node or due to an invalid SID List carried by the SRv6 packet. Anyway, the error counter is used to exclude that the packet did not arrive at the node or it has not been processed by the behavior at all. Turning on/off counters for SRv6 Behaviors ------------------------------------------ Each SRv6 Behavior instance can be configured, at the time of its creation, to make use of counters. This is done through iproute2 which allows the user to create an SRv6 Behavior instance specifying the optional "count" attribute as shown in the following example: $ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0 per-behavior counters can be shown by adding "-s" to the iproute2 command line, i.e.: $ ip -s -6 route show 2001:db8::1 2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Impact of counters for SRv6 Behaviors on performance ==================================================== To determine the performance impact due to the introduction of counters in the SRv6 Behavior subsystem, we have carried out extensive tests. We chose to test the throughput achieved by the SRv6 End.DX2 Behavior because, among all the other behaviors implemented so far, it reaches the highest throughput which is around 1.5 Mpps (per core at 2.4 GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.12-rc2 using packets of size ~ 100 bytes. Three different tests were conducted in order to evaluate the overall throughput of the SRv6 End.DX2 Behavior in the following scenarios: 1) vanilla kernel (without the SRv6 Behavior counters patch) and a single instance of an SRv6 End.DX2 Behavior; 2) patched kernel with SRv6 Behavior counters and a single instance of an SRv6 End.DX2 Behavior with counters turned off; 3) patched kernel with SRv6 Behavior counters and a single instance of SRv6 End.DX2 Behavior with counters turned on. All tests were performed on a testbed deployed on the CloudLab facilities [2], a flexible infrastructure dedicated to scientific research on the future of Cloud Computing. Results of tests are shown in the following table: Scenario (1): average 1504764,81 pps (~1504,76 kpps); std. dev 3956,82 pps Scenario (2): average 1501469,78 pps (~1501,47 kpps); std. dev 2979,85 pps Scenario (3): average 1501315,13 pps (~1501,32 kpps); std. dev 2956,00 pps As can be observed, throughputs achieved in scenarios (2),(3) did not suffer any observable degradation compared to scenario (1). Thanks to Jakub Kicinski and David Ahern for their valuable suggestions and comments provided during the discussion of the proposed RFCs. [2] https://www.cloudlab.usSigned-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 tlb updates from Ingo Molnar: "The x86 MM changes in this cycle were: - Implement concurrent TLB flushes, which overlaps the local TLB flush with the remote TLB flush. In testing this improved sysbench performance measurably by a couple of percentage points, especially if TLB-heavy security mitigations are active. - Further micro-optimizations to improve the performance of TLB flushes" * tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Micro-optimize smp_call_function_many_cond() smp: Inline on_each_cpu_cond() and on_each_cpu() x86/mm/tlb: Remove unnecessary uses of the inline keyword cpumask: Mark functions as pure x86/mm/tlb: Do not make is_lazy dirty for no reason x86/mm/tlb: Privatize cpu_tlbstate x86/mm/tlb: Flush remote and local TLBs concurrently x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy() x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote() smp: Run functions concurrently in smp_call_function_many_cond() -
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze updates from Michal Simek: "No new features, just about cleaning up some code and moving to generic syscall solution used by other architectures: - Switch to generic syscall scripts - Some small fixes" * tag 'microblaze-v5.13' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: add 'fallthrough' to memcpy/memset/memmove microblaze: Fix a typo microblaze: tag highmem_setup() with __meminit microblaze: syscalls: switch to generic syscallhdr.sh microblaze: syscalls: switch to generic syscalltbl.sh
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - removed get_fs/set_fs - removed broken/unmaintained MIPS KVM trap and emulate support - added support for Loongson-2K1000 - fixes and cleanups * tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG. MIPS: select ARCH_KEEP_MEMBLOCK unconditionally mips: Do not include hi and lo in clobber list for R6 MIPS:DTS:Correct the license for Loongson-2K MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K MIPS: Avoid handcoded DIVU in `__div64_32' altogether lib/math/test_div64: Correct the spelling of "dividend" lib/math/test_div64: Fix error message formatting mips/bootinfo:correct some comments of fw_arg MIPS: Avoid DIVU in `__div64_32' is result would be zero MIPS: Reinstate platform `__div64_32' handler div64: Correct inline documentation for `do_div' lib/math: Add a `do_div' test module MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE MIPS: pci-legacy: revert "use generic pci_enable_resources" MIPS: Loongson64: Add kexec/kdump support MIPS: pci-legacy: use generic pci_enable_resources MIPS: pci-legacy: remove busn_resource field MIPS: pci-legacy: remove redundant info messages MIPS: pci-legacy: stop using of_pci_range_to_resource ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify updates from Jan Kara: - support for limited fanotify functionality for unpriviledged users - faster merging of fanotify events - a few smaller fsnotify improvements * tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: shmem: allow reporting fanotify events with file handles on tmpfs fs: introduce a wrapper uuid_to_fsid() fanotify_user: use upper_32_bits() to verify mask fanotify: support limited functionality for unprivileged users fanotify: configurable limits via sysfs fanotify: limit number of event merge attempts fsnotify: use hash table for faster events merge fanotify: mix event info and pid into merge key hash fanotify: reduce event objectid to 29-bit hash fsnotify: allow fsnotify_{peek,remove}_first_event with empty queue
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota, ext2, reiserfs updates from Jan Kara: - support for path (instead of device) based quotactl syscall (quotactl_path(2)) - ext2 conversion to kmap_local() - other minor cleanups & fixes * tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fs/reiserfs/journal.c: delete useless variables fs/ext2: Replace kmap() with kmap_local_page() ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry() fs/ext2/: fix misspellings using codespell tool quota: report warning limits for realtime space quotas quota: wire up quotactl_path quota: Add mountpath based quota support
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs updates from Darrick Wong: "The notable user-visible addition this cycle is ability to remove space from the last AG in a filesystem. This is the first of many changes needed for full-fledged support for shrinking a filesystem. Still needed are (a) the ability to reorganize files and metadata away from the end of the fs; (b) the ability to remove entire allocation groups; (c) shrink support for realtime volumes; and (d) thorough testing of (a-c). There are a number of performance improvements in this code drop: Dave streamlined various parts of the buffer logging code and reduced the cost of various debugging checks, and added the ability to pre-create the xattr structures while creating files. Brian eliminated transaction reservations that were being held across writeback (thus reducing livelock potential. Other random pieces: Pavel fixed the repetitve warnings about deprecated mount options, I fixed online fsck to behave itself when a readonly remount comes in during scrub, and refactored various other parts of that code, Christoph contributed a lot of refactoring this cycle. The xfs_icdinode structure has been absorbed into the (incore) xfs_inode structure, and the format and flags handling around xfs_inode_fork structures has been simplified. Chandan provided a number of fixes for extent count overflow related problems that have been shaken out by debugging knobs added during 5.12. Summary: - Various minor fixes in online scrub. - Prevent metadata files from being automatically inactivated. - Validate btree heights by the computed per-btree limits. - Don't warn about remounting with deprecated mount options. - Initialize attr forks at create time if we suspect we're going to need to store them. - Reduce memory reallocation workouts in the logging code. - Fix some theoretical math calculation errors in logged buffers that span multiple discontig memory ranges but contiguous ondisk regions. - Speedups in dirty buffer bitmap handling. - Make type verifier functions more inline-happy to reduce overhead. - Reduce debug overhead in directory checking code. - Many many typo fixes. - Begin to handle the permanent loss of the very end of a filesystem. - Fold struct xfs_icdinode into xfs_inode. - Deprecate the long defunct BMV_IF_NO_DMAPI_READ from the bmapx ioctl. - Remove a broken directory block format check from online scrub. - Fix a bug where we could produce an unnecessarily tall data fork btree when creating an attr fork. - Fix scrub and readonly remounts racing. - Fix a writeback ioend log deadlock problem by dropping the behavior where we could preallocate a setfilesize transaction. - Fix some bugs in the new extent count checking code. - Fix some bugs in the attr fork preallocation code. - Refactor if_flags out of the incore inode fork data structure" * tag 'xfs-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (77 commits) xfs: remove xfs_quiesce_attr declaration xfs: remove XFS_IFEXTENTS xfs: remove XFS_IFINLINE xfs: remove XFS_IFBROOT xfs: only look at the fork format in xfs_idestroy_fork xfs: simplify xfs_attr_remove_args xfs: rename and simplify xfs_bmap_one_block xfs: move the XFS_IFEXTENTS check into xfs_iread_extents xfs: drop unnecessary setfilesize helper xfs: drop unused ioend private merge and setfilesize code xfs: open code ioend needs workqueue helper xfs: drop submit side trans alloc for append ioends xfs: fix return of uninitialized value in variable error xfs: get rid of the ip parameter to xchk_setup_* xfs: fix scrub and remount-ro protection when running scrub xfs: move the check for post-EOF mappings into xfs_can_free_eofblocks xfs: move the xfs_can_free_eofblocks call under the IOLOCK xfs: precalculate default inode attribute offset xfs: default attr fork size does not handle device inodes xfs: inode fork allocation depends on XFS_IFEXTENT flag ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Fix some compiler and kernel-doc warnings - Various minor cleanups and optimizations - Add a new sysfs gfs2 status file with some filesystem wide information * tag 'gfs2-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix fall-through warnings for Clang gfs2: Fix a number of kernel-doc warnings gfs2: Make gfs2_setattr_simple static gfs2: Add new sysfs file for gfs2 status gfs2: Silence possible null pointer dereference warning gfs2: Turn gfs2_meta_indirect_buffer into gfs2_meta_buffer gfs2: Replace gfs2_lblk_to_dblk with gfs2_get_extent gfs2: Turn gfs2_extent_map into gfs2_{get,alloc}_extent gfs2: Add new gfs2_iomap_get helper gfs2: Remove unused variable sb_format gfs2: Fix dir.c function parameter descriptions gfs2: Eliminate gh parameter from go_xmote_bh func gfs2: don't create empty buffers for NO_CREATE
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat updates from Namjae Jeon: - Improve write performance with dirsync mount option - Improve lookup performance - Add support for FITRIM ioctl - Fix a bug with discard option * tag 'exfat-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: speed up iterate/lookup by fixing start point of traversing cluster chain exfat: improve write performance when dirsync enabled exfat: add support ioctl and FITRIM function exfat: introduce bitmap_lock for cluster bitmap access exfat: fix erroneous discard when clear cluster bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Embed struct vfio_device into vfio driver structures (Jason Gunthorpe) - Make vfio_mdev type safe (Jason Gunthorpe) - Remove vfio-pci NVLink2 extensions for POWER9 (Christoph Hellwig) - Update vfio-pci IGD extensions for OpRegion 2.1+ (Fred Gao) - Various spelling/blank line fixes (Zhen Lei, Zhou Wang, Bhaskar Chowdhury) - Simplify unpin_pages error handling (Shenming Lu) - Fix i915 mdev Kconfig dependency (Arnd Bergmann) - Remove unused structure member (Keqian Zhu) * tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfio: (43 commits) vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommu vfio/mdev: Correct the function signatures for the mdev_type_attributes vfio/mdev: Remove kobj from mdev_parent_ops->create() vfio/gvt: Use mdev_get_type_group_id() vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV vfio/mbochs: Use mdev_get_type_group_id() vfio/mdpy: Use mdev_get_type_group_id() vfio/mtty: Use mdev_get_type_group_id() vfio/mdev: Add mdev/mtype_get_type_group_id() vfio/mdev: Remove duplicate storage of parent in mdev_device vfio/mdev: Add missing error handling to dev_set_name() vfio/mdev: Reorganize mdev_device_create() vfio/mdev: Add missing reference counting to mdev_type vfio/mdev: Expose mdev_get/put_parent to mdev_private.h vfio/mdev: Use struct mdev_type in struct mdev_device vfio/mdev: Simplify driver registration vfio/mdev: Add missing typesafety around mdev_device vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer vfio/mdev: Fix missing static's on MDEV_TYPE_ATTR's ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "Here's a collection of largely clk driver updates. The usual suspects are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip, but it feels pretty light on commits. There's only one real commit to the framework core and that's to consolidate code. Otherwise the diffstat is dominated by many Qualcomm clk driver patches that modernize the driver for the proper way of speciying clk parents. That's shifting data around, which could subtly break things so I'll be on the lookout for fixes. New Drivers: - Proper clk driver for Mediatek MT7621 SoCs - Support for the clock controller on the new Rockchip rk3568 Updates: - Simplify Zynq Kconfig dependencies - Use clk_hw pointers in socfpga driver - Cleanup parent data in qcom clk drivers - Some cleanups for rk3399 modularization - Fix reparenting of i.MX UART clocks by initializing only the ones associated to stdout - Correct the PCIE clocks for i.MX8MP and i.MX8MQ - Make i.MX LPCG and SCU clocks return on registering failure - Kernel doc fixes - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0 - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on Renesas R-Car V3U - Sigma-delta modulation on Allwinner V3s audio PLL" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits) MAINTAINERS: add MT7621 CLOCK maintainer staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk' staging: mt7621-dts: make use of new 'mt7621-clk' clk: ralink: add clock driver for mt7621 SoC clk: uniphier: Fix potential infinite loop clk: qcom: rpmh: add support for SDX55 rpmh IPA clock clk: qcom: gcc-sdm845: get rid of the test clock clk: qcom: convert SDM845 Global Clock Controller to parent_data dt-bindings: clock: separate SDM845 GCC clock bindings clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE dt: bindings: add mt7621-sysc device tree binding documentation dt-bindings: clock: add dt binding header for mt7621 clocks clk: samsung: Remove redundant dev_err calls clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback clk: zynqmp: Drop dependency on ARCH_ZYNQMP clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents ...
-
- 28 Apr, 2021 14 commits
-
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: "qcom: - enable support for SM8350 and SC7280 sprd: - refcount channel usage - specify interrupt names in dt - support sc9863a arm: - drop redundant print ti: - convert dt-bindings to json schema and misc spelling fixes" * tag 'mailbox-v5.13' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom-ipcc: Add compatible for SC7280 dt-bindings: mailbox: ti,secure-proxy: Convert to json schema mailbox: arm_mhu_db: Remove redundant dev_err call in mhu_db_probe() mailbox: sprd: Add supplementary inbox support dt-bindings: mailbox: Add interrupt-names to SPRD mailbox mailbox: sprd: Introduce refcnt when clients requests/free channels MAINTAINERS: Add DT bindings directory to mailbox mailbox: fix various typos in comments mailbox: pcc: fix platform_no_drv_owner.cocci warnings dt-bindings: mailbox: Add compatible for SM8350 IPCC
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "New Device Support: - Add support for PMI8994 to Qualcom WLED - Add support for KTD259 to Kinetic KTD253 Fix-ups: - Device Tree related fix-ups; kinetic,ktd253 - Use proper sequence during sync_toggle; qcom-wled - Fix Wmisleading-indentation warnings; jornada720_bl Bug Fixes: - Fix sync toggle on WLED4; qcom-wled - Fix FSC update on WLED5; qcom-wled" * tag 'backlight-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: journada720: Fix Wmisleading-indentation warning backlight: qcom-wled: Correct the sync_toggle sequence backlight: qcom-wled: Fix FSC update issue for WLED5 dt-bindings: backlight: Add Kinetic KTD259 bindings backlight: ktd253: Support KTD259 backlight: qcom-wled: Use sink_addr for sync toggle dt-bindings: backlight: qcom-wled: Add PMI8994 compatible
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Framework: - Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core New Drivers: - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey New Device Support: - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC Removed Device Support: - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether New Functionality: - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) New/converted Device Tree bindings: - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions atc260x, ricoh rn5t618, qcom pm8xxx - Fix-ups: - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio Bug Fixes: - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers" * tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell" mfd: twl: Remove unused inline function twl4030charger_usb_en() dt-bindings: mfd: Convert pm8xxx bindings to yaml dt-bindings: mfd: Add compatible for pmk8350 rtc i2c: designware: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000" mfd: arizona: Fix rumtime PM imbalance on error mfd: max8997: Replace 8998 with 8997 mfd: core: Use acpi_find_child_device() for child devices lookup mfd: intel_quark_i2c_gpio: Don't play dirty trick with const mfd: intel_quark_i2c_gpio: Enable MSI interrupt mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing mfd: ntxec: Support for EC in Tolino Shine 2 HD mfd: stm32-timers: Avoid clearing auto reload register mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions mfd: intel_quark_i2c_gpio: Remove unused struct device member mfd: intel_quark_i2c_gpio: Unregister resources in reversed order mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Fix hanging on I/O during system suspend for removable cards - Set read only for SD cards with permanent write protect bit - Power cycle the SD/SDIO card if CMD11 fails for UHS voltage - Issue a cache flush for eMMC only when it's enabled - Adopt to updated cache ctrl settings for eMMC from MMC ioctls - Use use device property API when parsing voltages - Don't retry eMMC sanitize cmds - Use the timeout from the MMC ioctl for eMMC santize cmds MMC host: - mmc_spi: Make of_mmc_spi.c resource provider agnostic - mmc_spi: Use polling for card detect even without voltage-ranges - sdhci: Check for reset prior to DMA address unmap - sdhci-acpi: Add support for the AMDI0041 eMMC controller variant - sdhci-esdhc-imx: Depending on OF Kconfig and cleanup code - sdhci-pci: Add PCI IDs for Intel LKF - sdhci-pci: Fix initialization of some SD cards for Intel BYT - sdhci-pci-gli: Various improvements for GL97xx variants - sdhci-of-dwcmshc: Enable support for MMC_CAP_WAIT_WHILE_BUSY - sdhci-of-dwcmshc: Add ACPI support for BlueField-3 SoC - sdhci-of-dwcmshc: Add Rockchip platform support - tmio/renesas_sdhi: Extend support for reset and use a reset controller - tmio/renesas_sdhi: Enable support for MMC_CAP_WAIT_WHILE_BUSY - tmio/renesas_sdhi: Various improvements MEMSTICK: - Minor improvements/cleanups" * tag 'mmc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (79 commits) mmc: block: Issue a cache flush only when it's enabled memstick: r592: ignore kfifo_out() return code again mmc: block: Update ext_csd.cache_ctrl if it was written mmc: mmc_spi: Make of_mmc_spi.c resource provider agnostic mmc: mmc_spi: Use already parsed IRQ mmc: mmc_spi: Drop unused NO_IRQ definition mmc: mmc_spi: Set up polling even if voltage-ranges is not present mmc: core: Convert mmc_of_parse_voltage() to use device property API mmc: core: Correct descriptions in mmc_of_parse() mmc: dw_mmc-rockchip: Just set default sample value for legacy mode mmc: sdhci-s3c: constify uses of driver/match data mmc: sdhci-s3c: correct kerneldoc of sdhci_s3c_drv_data mmc: sdhci-s3c: simplify getting of_device_id match data mmc: tmio: always restore irq register mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL975x mmc: core: Let eMMC sanitize not retry in case of timeout/failure mmc: core: Add a retries parameter to __mmc_switch function memstick: r592: remove unused variable mmc: sdhci-st: Remove unnecessary error log mmc: sdhci-msm: Remove unnecessary error log ...
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "A bunch of little cleanups Nothing major, no functional changes" * tag 'for-linus-5.13-1' of git://github.com/cminyard/linux-ipmi: ipmi_si: Join string literals back ipmi_si: Drop redundant check before calling put_device() ipmi_si: Use strstrip() to remove surrounding spaces ipmi_si: Get rid of ->addr_source_cleanup() ipmi_si: Reuse si_to_str[] array in ipmi_hardcode_init_one() ipmi_si: Introduce ipmi_panic_event_str[] array ipmi_si: Use proper ACPI macros to check error code for failures ipmi_si: Utilize temporary variable to hold device pointer ipmi_si: Remove bogus err_free label ipmi_si: Switch to use platform_get_mem_or_io() ipmi: Handle device properties with software node API ipmi:ssif: make ssif_i2c_send() void ipmi: Refine retry conditions for getting device id
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: - Refactor powerpc and arm64 kexec DT handling to common code. This enables IMA on arm64. - Add kbuild support for applying DT overlays at build time. The first user are the DT unittests. - Fix kerneldoc formatting and W=1 warnings in drivers/of/ - Fix handling 64-bit flag on PCI resources - Bump dtschema version required to v2021.2.1 - Enable undocumented compatible checks for dtbs_check. This allows tracking of missing binding schemas. - DT docs improvements. Regroup the DT docs and add the example schema and DT kernel ABI docs to the doc build. - Convert Broadcom Bluetooth and video-mux bindings to schema - Add QCom sm8250 Venus video codec binding schema - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile Technologies Inc. - Cleanup of DT schema type references on common properties and standard unit properties * tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) powerpc: If kexec_build_elf_info() fails return immediately from elf64_load() powerpc: Free fdt on error in elf64_load() of: overlay: Fix kerneldoc warning in of_overlay_remove() of: linux/of.h: fix kernel-doc warnings of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses dt-bindings: bcm4329-fmac: add optional brcm,ccode-map docs: dt: update writing-schema.rst references dt-bindings: media: venus: Add sm8250 dt schema of: base: Fix spelling issue with function param 'prop' docs: dt: Add DT API documentation of: Add missing 'Return' section in kerneldoc comments of: Fix kerneldoc output formatting docs: dt: Group DT docs into relevant sub-sections docs: dt: Make 'Devicetree' wording more consistent docs: dt: writing-schema: Include the example schema in the doc build docs: dt: writing-schema: Remove spurious indentation dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3 dt-bindings: media: video-interfaces: Drop the example devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "battery/charger driver changes: - core: - provide function stubs if CONFIG_POWER_SUPPLY=n - reduce loglevel for probe defer info - surface: - new battery and charger drivers for Surface - bq27xxx: - add bq78z100 support - fix current_now/power_avg for newer chips - cw2015: - add CHARGE_NOW support - ab8500: - drop pdata support - convert most DT bindings to YAML - lots of minor fixes and cleanups reset drivers: - ltc2952-poweroff: - make trigger delay configurable from DT - minor fixes and cleanups" * tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits) power: supply: cpcap-battery: fix invalid usage of list cursor power: supply: bq256xx: add kerneldoc for structure members power: supply: act8945a: correct kerneldoc power: supply: max17040: remove unneeded double cast power: supply: max17040: handle device_property_read_u8_array() failure power: supply: max14577: remove unneeded variable initialization power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static power: supply: surface-battery: Make some symbols static power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove() power: supply: generic-adc-battery: fix possible use-after-free in gab_remove() power: supply: Add AC driver for Surface Aggregator Module power: supply: Add battery driver for Surface Aggregator Module power: supply: bq25980: Move props from battery node power: supply: core: Use true and false for bool variable power: supply: goldfish: Remove the GOLDFISH dependency power: reset: ltc2952: make trigger delay configurable power: supply: cpcap-charger: Simplify bool conversion power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce ... -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI update from Sebastian Reichel: - memory leak fix in hsi_add_client_from_dt() error path * tag 'hsi-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: core: fix resource leaks in hsi_add_client_from_dt()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring updates from Jens Axboe: - Support for multi-shot mode for POLL requests - More efficient reference counting. This is shamelessly stolen from the mm side. Even though referencing is mostly single/dual user, the 128 count was retained to keep the code the same. Maybe this should/could be made generic at some point. - Removal of the need to have a manager thread for each ring. The manager threads only job was checking and creating new io-threads as needed, instead we handle this from the queue path. - Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this thread is "just" a regular application thread, so no need to restrict use of it anymore. - Cleanup of how internal async poll data lifetime is managed. - Fix for syzbot reported crash on SQPOLL cancelation. - Make buffer registration more like file registrations, which includes flexibility in avoiding full set unregistration and re-registration. - Fix for io-wq affinity setting. - Be a bit more defensive in task->pf_io_worker setup. - Various SQPOLL fixes. - Cleanup of SQPOLL creds handling. - Improvements to in-flight request tracking. - File registration cleanups. - Tons of cleanups and little fixes * tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits) io_uring: maintain drain logic for multishot poll requests io_uring: Check current->io_uring in io_uring_cancel_sqpoll io_uring: fix NULL reg-buffer io_uring: simplify SQPOLL cancellations io_uring: fix work_exit sqpoll cancellations io_uring: Fix uninitialized variable up.resv io_uring: fix invalid error check after malloc io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker kernel: always initialize task->pf_io_worker to NULL io_uring: update sq_thread_idle after ctx deleted io_uring: add full-fledged dynamic buffers support io_uring: implement fixed buffers registration similar to fixed files io_uring: prepare fixed rw for dynanic buffers io_uring: keep table of pointers to ubufs io_uring: add generic rsrc update with tags io_uring: add IORING_REGISTER_RSRC io_uring: enumerate dynamic resources io_uring: add generic path for rsrc update io_uring: preparation for rsrc tagging io_uring: decouple CQE filling from requests ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull libata updates from Jens Axboe: "Mostly cleanups this time, but also a few additions: - kernel-doc cleanups and sanitization (Lee) - Spelling fix (Bhaskar) - Fix ata_qc_from_tag() return value check in dwc_460ex (Dinghao) - Fall-through warning fix (Gustavo) - IRQ registration fixes (Sergey) - Add AHCI support for Tegra186 (Sowjanya) - Add xiling phy support for AHCI (Piyush) - SXS disable fix for AHCI for Hisilicon Kunpeng920 (Xingui) - pata legacy probe mask support (Maciej)" * tag 'for-5.13/libata-2021-04-27' of git://git.kernel.dk/linux-block: (54 commits) libata: Fix fall-through warnings for Clang pata_ipx4xx_cf: Fix unsigned comparison with less than zero ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present ata: ahci_tegra: Add AHCI support for Tegra186 dt-binding: ata: tegra: Add dt-binding documentation for Tegra186 dt-bindings: ata: tegra: Convert binding documentation to YAML pata_legacy: Add `probe_mask' parameter like with ide-generic pata_platform: Document `pio_mask' module parameter pata_legacy: Properly document module parameters ata: ahci: ceva: Updated code by using dev_err_probe() ata: ahci: Disable SXS for Hisilicon Kunpeng920 ata: libahci_platform: fix IRQ check sata_mv: add IRQ checks ata: pata_acpi: Fix some incorrect function param descriptions ata: libata-acpi: Fix function name and provide description for 'prev_gtf' ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()' ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param ata: pata_legacy: Repair a couple kernel-doc problems ata: ata_generic: Fix misspelling of 'ata_generic_init_one()' ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()' ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: - MD changes via Song: - raid5 POWER fix - raid1 failure fix - UAF fix for md cluster - mddev_find_or_alloc() clean up - Fix NULL pointer deref with external bitmap - Performance improvement for raid10 discard requests - Fix missing information of /proc/mdstat - rsxx const qualifier removal (Arnd) - Expose allocated brd pages (Calvin) - rnbd via Gioh Kim: - Change maintainer - Change domain address of maintainers' email - Add polling IO mode and document update - Fix memory leak and some bug detected by static code analysis tools - Code refactoring - Series of floppy cleanups/fixes (Denis) - s390 dasd fixes (Julian) - kerneldoc fixes (Lee) - null_blk double free (Lv) - null_blk virtual boundary addition (Max) - Remove xsysace driver (Michal) - umem driver removal (Davidlohr) - ataflop fixes (Dan) - Revalidate disk removal (Christoph) - Bounce buffer cleanups (Christoph) - Mark lightnvm as deprecated (Christoph) - mtip32xx init cleanups (Shixin) - Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang) * tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits) async_xor: increase src_offs when dropping destination page drivers/block/null_blk/main: Fix a double free in null_init. md/raid1: properly indicate failure when ending a failed write request md-cluster: fix use-after-free issue when removing rdev nvme: introduce generic per-namespace chardev nvme: cleanup nvme_configure_apst nvme: do not try to reconfigure APST when the controller is not live nvme: add 'kato' sysfs attribute nvme: sanitize KATO setting nvmet: avoid queuing keep-alive timer if it is disabled brd: expose number of allocated pages in debugfs ataflop: fix off by one in ataflop_probe() ataflop: potential out of bounds in do_format() drbd: Fix fall-through warnings for Clang block/rnbd: Use strscpy instead of strlcpy block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name block/rnbd-clt: Remove max_segment_size block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev Documentation/ABI/rnbd-clt: Add description for nr_poll_queues ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block updates from Jens Axboe: "Pretty quiet round this time, which is nice. In detail: - Series revamping bounce buffer support (Christoph) - Dead code removal (Christoph, Bart) - Partition iteration revamp, now using xarray (Christoph) - Passthrough request scheduler improvements (Lin) - Series of BFQ improvements (Paolo) - Fix ioprio task iteration (Peter) - Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max, Nikolay)" * tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits) blk-iocost: don't ignore vrate_min on QD contention blk-mq: Fix spurious debugfs directory creation during initialization bfq/mq-deadline: remove redundant check for passthrough request blk-mq: bypass IO scheduler's limit_depth for passthrough request block: Remove an obsolete comment from sg_io() block: move bio_list_copy_data to pktcdvd block: remove zero_fill_bio_iter block: add queue_to_disk() to get gendisk from request_queue block: remove an incorrect check from blk_rq_append_bio block: initialize ret in bdev_disk_changed block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration block: remove disk_part_iter block: simplify diskstats_show block: simplify show_partition block: simplify printk_all_partitions block: simplify partition_overlaps block: simplify partition removal block: take bd_mutex around delete_partitions in del_gendisk block: refactor blk_drop_partitions block: move more syncing and invalidation to delete_partition ... -
Oleksij Rempel authored
In case ethernet driver is enabled and INET is disabled, selftest will fail to build. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: 3e1e58d6 ("net: add generic selftest support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jiapeng Chong authored
Variable ns is set to 'skb->data[17]' but this value is never read as it is overwritten or not used later on, hence it is a redundant assignment and can be removed. Cleans up the following clang-analyzer warning: net/netrom/nr_in.c:156:2: warning: Value stored to 'ns' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
-
